Simulation of motorcycle crashes with w-beam guardrail: injury patterns and analysis.

This study uses computer simulations to study the impact of a motorcycle with the conventional w-beam guardrail. A three-dimensional computer simulation of a scaled hybrid III 50th-percentile male dummy mounted on a motorcycle and colliding with a w-beam guardrail is carried out. A multi-body model of the motorcycle and finite element model of the guardrail are developed using commercially available software. The simulation model is validated with a physical crash test conducted with same initial impact configurations. Impacts at speeds of 32, 48, and 60 km/h at an impact angle at 45 degrees are considered. The predicted forces and accelerations are compared with the biomechanical limits for each body part and the risk of injury to the rider are evaluated. Speed was found to have a significant influence on the level of injury to the head, neck, chest, and femur. A significant reduction of the severity of injuries was found when the impact speed was reduced from 60 to 32km/h. The accelerations experienced by the head and chest are found to be higher than safe levels for impact speeds of 48 and 60 km/h. The biomechanical limit for the right femur is exceeded at all three considered impact speeds. Neck injuries are also a concern, with the predicted tension values and neck bending extent being higher than the biomechanical limit for the 60 km/h impact speed. In light of these results, it is suggested that the design of guardrails should be reviewed with a focus on the safety of motorcyclists.

Engaging policy makers in road safety research in Malaysia: a theoretical and contextual analysis.

Road traffic injuries (RTIs) are a growing public health problem that must be addressed through evidence-based interventions including policy-level changes such as the enactment of legislation to mandate specific behaviors and practices. Policy makers need to be engaged in road safety research to ensure that road safety policies are grounded in scientific evidence. This paper examines the strategies used to engage policy makers and other stakeholder groups and discusses the challenges that result from a multi-disciplinary, inter-sectoral collaboration. A framework for engaging policy makers in research was developed and applied to describe an example of collective road safety research in Malaysia. Key components of this framework include readiness, assessment, planning, implementation/evaluation, and policy development/sustainability. The case study of a collaborative intervention trial for the prevention of motorcycle crashes and deaths in Malaysia serves as a model for policy engagement by road safety and injury researchers. The analytic description of this research process in Malaysia demonstrates that the framework, through its five stages, can be used as a tool to guide the integration of needed research evidence into policy for road safety and injury prevention.

Impact of the effect of economic crisis and the targeted motorcycle safety programme on motorcycle-related accidents, injuries and fatalities in Malaysia.

In 1997, a Motorcycle Safety Programme (MSP) was introduced to address the motorcycle-related accident problem. The MSP was specifically targeted at motorcyclists. In addition to the MSP, the recent economic recession has significantly contributed to a reduction of traffic-related incidents. This paper examines the effects of the recent economic crisis and the MSP on motorcycle-related accidents, casualties and fatalities in Malaysia. The autocorrelation integrated moving average model with transfer function was used to evaluate the overall effects of the interventions. The variables used in developing the model were gross domestic product and MSPs. The analysis found a 25% reduction in the number of motorcycle-related accidents, a 27% reduction in motorcycle casualties and a 38% reduction in motorcycle fatalities after the implementation of MSP. Findings indicate that the MSP has been one of the effective measures in reducing motorcycle safety problems in Malaysia. Apart from that, the performance of the country's economy was also found to be significant in explaining the number of motorcycle-related accidents, casualties and fatalities in Malaysia.

Predictive model for motorcycle accidents at three-legged priority junctions.

In conjunction with a nationwide motorcycle safety program, the provision of exclusive motorcycle lanes has been implemented to overcome link-motorcycle accidents along trunk roads in Malaysia. However, not much work has been done to address accidents at junctions involving motorcycles. This article presents the development of predictive model for motorcycle accidents at three-legged major-minor priority junctions of urban roads in Malaysia. The generalized linear modeling technique was used to develop the model. The final model reveals that motorcycle accidents are proportional to the power of traffic flow. An increase in nonmotorcycle and motorcycle flows entering the junctions is associated with an increase in motorcycle accidents. Nonmotorcycle flow on major roads had the highest effect on the probability of motorcycle accidents. Approach speed, lane width, number of lanes, shoulder width, and land use were found to be significant in explaining motorcycle accidents at the three-legged major-minor priority junctions. These findings should enable traffic engineers to specifically design appropriate junction treatment criteria for nonexclusive motorcycle lane facilities.