Stubby versus stabby: A preliminary analysis of canine microwear in primates: Implication for inferring ingestive behaviors.

Molar and incisor microwear reflect aspects of food choice and ingestive behaviors in living primates and have both been used to infer the same for fossil samples. Canine microwear, however, has received less attention, perhaps because of the prominent role canines play in social display and because they are used as weapons-while outside of a few specialized cases, their involvement in diet related behaviors has not been obvious. Here, we posit that microwear can also provide glimpses into canine tooth use in ingestion. Canines of Sumatran long-tailed macaques (Macaca fascicularis), agile gibbons (Hylobates agilis), lar gibbons (Hylobates lar), Thomas' leaf monkeys (Presbytis thomasi), and orangutans (Pongo abelii), and two African great apes, bonobos (Pan paniscus) and common chimpanzees (Pan troglodytes schweinfurthii), were considered. The labial tips of maxillary canine replicas were scanned using a white-light confocal profiler, and both feature and texture analyses were used to characterize microwear surface patterning. The taxa exhibited significant differences in canine microwear. In some cases, these were consistent with variation in reported anterior tooth use such that, for example, the orangutans, known to use their front teeth extensively in ingestion, had the highest median number of microwear features on their canines, whereas the gibbons, reported to use their front teeth infrequently in food acquisition, had the lowest.

Exploratory Analysis of Objective Outcome Measures for the Clinical Assessment of Erosive Tooth Wear.

This study proposed using enamel surface texture and thickness for the objective detection and monitoring of erosive tooth wear (ETW), comparing them to the standard subjective Basic Erosive Wear Evaluation (BEWE). Thirty-two subjects (n = 597 teeth) were enrolled in this longitudinal observational clinical study. Enamel thickness (by cross-polarization optical coherence tomography, CP-OCT) and 3D dental microwear parameters, i.e., area-scale fractal complexity (Asfc), anisotropy (Str), and roughness (Sa) (by white-light scanning confocal profilometry), were obtained from buccal surfaces. Buccal, occlusal, and lingual surfaces were scored for BEWE and the maximum score per tooth (BEWEMax) was determined at baseline and 12 months (M12). Data outcome relationships were evaluated (alpha = 0.05). Enamel thickness decreased (p < 0.001), BEWE scores, Sa, and Str increased (p < 0.001), while Asfc did not change at M12. Baseline BEWEBuccal correlated strongly with BEWEMax (r = 0.86, p < 0.001) and moderately with BEWELingual (r = 0.42, p < 0.001), but not with enamel thickness (r = 0.03, p = 0.43). Change (Δ) in surface texture outcomes correlated poorly but significantly with ΔBEWEBuccal (r = -0.15-0.16, p < 0.001) and did not correlate with Δenamel thickness (r = 0.02-0.09, p > 0.06). Teeth with BEWE progression revealed a greater increase in ΔSa and ΔStr. These findings suggest that enamel surface roughness can potentially determine ETW severity, and CP-OCT may be relevant for clinically monitoring enamel thickness.

Relationships between Dental Topography, Gross Wear, and Bang and Ramm/Liversidge and Molleson Age Estimates for a Sample of Human Premolar Teeth.

Objectives: Molar crown wear is often used in bioarchaeological research as a proxy for age at death. However, a small number of researchers have used premolars or compared the application of different methods of relative age estimation. Material and methods: Using a sample of 197 previously extracted maxillary first premolars from US dental patients, we considered three protocols for estimating age: the Bang and Ramm/Liversidge and Molleson (BRLM) age estimate method, occlusal topographic analysis, and the Smith system of macrowear scoring. A previous study utilizing the Bang and Ramm method yielded an age estimate range of 9.4 to 10.8 years for the sample. Results: Our analyses showed no associations between occlusal topography parameters (occlusal slope, relief, or faceting) and BRLM age estimates, but some concordance was found between Smith scoring and BRLM ages estimates and between Smith scoring and occlusal topography parameters. Conclusion: The results of the present study suggest that relationships between gross tooth wear, tooth shape, and dental age estimates are complex, and available methods should be considered together to gain a more comprehensive understanding of how teeth change their shape with wear throughout the lifecourse.

Changing perspectives on early hominin diets.

It is axiomatic that knowledge of the diets of extinct hominin species is central to any understanding of their ecology and our evolution. The importance of diet in the paleontological realm has led to the employment of multiple approaches in its elucidation. Some of these have deep historical roots, while others are dependent upon more recent technical and methodological advances. Historically, studies of tooth size, shape, and structure have been the gold standard for reconstructing diet. They focus on species-level adaptations, and as such, they can set theoretical brackets for dietary capabilities within the context of specific evolutionary moments. Other methods (e.g., analyses of dental calculus, biogeochemistry, and dental microwear) have only been developed within the past few decades, but are now beginning to yield evidence of the actual foods consumed by individuals represented by fossil remains. Here we begin by looking at these more "direct" forms of evidence of diet before showing that, when used in conjunction with other techniques, these "multi-proxy" approaches can raise questions about traditional interpretations of early hominin diets and change the nature of paleobiological interpretations.

Objective characterization of dental occlusal and fissure morphologies: Method development and exploratory analysis.

OBJECTIVE: To develop clinically applicable methods to characterize occlusal topography and assess possible associations between morphology and caries incidence and development. DESIGN: In this retrospective clinical study, we evaluated caries presence and severity pre- and post-orthodontic treatment for first molars of 147 patients (384 teeth). These teeth were previously scanned using a clinical intraoral scanner, and the obtained digital elevation models were used to 1) analyze the 3D occlusal surface parameters (n = 384) and 2) quantitatively characterize the mandibular molars' (n = 166) fissure patterns using three novel methods. Pearson correlation coefficients were calculated to evaluate the associations among the measurements, and presence/severity of caries pre- and post-treatment were assessed using generalized linear mixed-effects models. RESULTS: Robust quantitative fissure characterizations were developed, and reliable occlusal surface parameters were obtained. In the studied population, none of the parametric measurements (Slope: p = 0.62 for presence, p = 0.96 for severity; Relief Index (RFI): p = 0.36, p = 0.84; Orientation Patch Count rotated (OPCr): p = 0.48, p = 0.13; Dirichlet Normal Energy (DNE): p = 0.91, p = 0.15) or the fissure morphological measurements (Mesial Angle: p = 0.43; Distal Angle: p = 0.86; Average Angle: p = 0.52; Area Difference: p = 0.83; Percent Fissure: p = 0.68) were found to be significantly associated with caries status or severity. CONCLUSION: Despite the lack of correlation in the limited studied sample, the tools developed to characterize occlusal surface topography and fissure morphology have the potential to be used in more comprehensive clinical evaluations.

Grit your teeth and chew your food: Implications of food material properties and abrasives for rates of dental microwear formation in laboratory Sapajus apella (Primates).

Dental microwear analysis has been employed in studies of a wide range of modern and fossil animals, yielding insights into the biology/ecology of those taxa. Some researchers have suggested that dental microwear patterns ultimately relate back to the material properties of the foods being consumed, whereas others have suggested that, because exogenous grit is harder than organic materials in food, grit should have an overwhelming impact on dental microwear patterns. To shed light on this issue, laboratory-based feeding experiments were conducted on tufted capuchin monkeys [Sapajus apella] with dental impressions taken before and after consumption of different artificial foods. The foods were (1) brittle custom-made biscuits laced with either of two differently-sized aluminum silicate abrasives, and (2) ductile custom-made "gummies" laced with either of the two same abrasives. In both cases, animals were allowed to feed on the foods for 36 hours before follow-up dental impressions were taken. Resultant casts were analyzed using a scanning electron microscope. We asked five questions: (1) would the animals consume different amounts of each food item, (2) what types of dental microwear would be formed, (3) would rates of dental microwear differ between the consumption of biscuits (i.e., brittle) versus gummies (i.e., ductile), (4) would rates of dental microwear differ between foods including larger- versus smaller-grained abrasives, and (5) would rates of dental microwear differ between molar shearing and crushing facets in the animals in these experiments? Results indicated that (1) fewer biscuits were consumed when laced with larger-grained abrasives (as opposed to smaller-grained abrasives), but no such difference was observed in the consumption of gummies, (2) in all cases, a variety of dental microwear features was formed, (3) rates of dental microwear were higher when biscuits versus gummies were consumed, (4) biscuits laced with larger-grained abrasives caused a higher percentage of new features per item consumed, and (5) the only difference between facets occurred with the processing of biscuits, where crushing facets showed a faster rate of wear than shearing facets. These findings suggest that the impact of exogenous grit on dental microwear is the result of a dynamic, complex interaction between (at the very least) grit size, food material properties, and time spent feeding - which is further evidence of the multifactorial nature of dental microwear formation.

Tooth Age Impact on Dental Erosion Susceptibility and Treatment Efficacy.

This laboratory study investigated the impact of tooth age on dental erosion susceptibility and preventive treatment efficacy. Extracted human premolars were selected and had their age estimated (∼10-100 years old) using established dental forensic methods. Enamel and root dentin slabs were prepared, embedded in acrylic blocks, flattened, and polished. The specimens were randomly assigned to one of three treatments (n = 93): Sn+F (800 ppm Sn as SnCl2 and 250 ppm F as NaF, pH 4.5), NaF (250 ppm F, pH 4.5), or deionized water (DIW). Each specimen was subjected for 10 days to a daily cycling protocol consisting of six 5-min erosive challenges (0.3% citric acid, pH 2.6), six 60-min remineralization periods (artificial saliva), and three 2-min treatments with the test solutions. Surface loss (SL) was measured after 3, 5, and 10 days, using optical profilometry. Effects of tooth age, antierosive treatment, and time on SL were evaluated using linear mixed effects regression analysis. SL increased with age for all substrate-treatment-time combinations (p < 0.0001). Sn+F and NaF solutions significantly reduced SL compared to DIW, regardless of substrate, time, or age (p < 0.0001), with best results shown for Sn+F. Efficacy of Sn+F increased with tooth age on enamel, but tooth age did not affect the efficacy of NaF on enamel. For dentin, increased efficacy was observed with age after 5 (for Sn+F) and 10 days (for Sn+F and NaF). In conclusion, increase of tooth age rendered enamel and root dentin more susceptible to dental erosion. NaF preventive efficacy improved with tooth age for dentin, in advanced erosion simulation. Sn+F reduced enamel SL due to erosion regardless of tooth age.

Objective assessment of simulated non-carious cervical lesion by tridimensional digital scanning.

OBJECTIVE: To explore the use of 3D intraoral scanner/image analysis for the detection and monitoring of simulated non-carious cervical lesions (NCCLs) in vitro. MATERIALS AND METHODS: A total of 288 NCCLs of different severities and simulated using a laboratorial model associating toothbrush stiffness (soft, medium, and hard) and toothpaste abrasivity (low, medium, high, and negative control) were analyzed. Dental impressions were taken from specimens before and after 35K and 65K brushing strokes, and then scanned with a CEREC Omnicam scanner. 3D models were analyzed for volumetric tooth loss. 3D optical profilometry was considered as the gold standard. Data were analyzed using ANOVA and Fisher's PLSD tests (alpha = 0.05), and agreement between methods by using intraclass correlation coefficient. RESULTS: Toothbrushes of hard and mid stiffness caused higher tooth loss than soft when associated with the highest abrasive, at 35K and 65K strokes (p < 0.001). Variation in slurry abrasivity led to differences in tooth loss (with control < low < medium < high, p < 0.0001) after both 35K and 65K strokes, regardless of the type of toothbrush used, except at 35K, wherein control = low (p = 0.55). 35K strokes caused less tooth loss than 65K for all abrasive slurries (p < 0.0001) except controls. The intraclass correlation coefficient for agreement between the test and gold standard methods was 0.85. CONCLUSIONS: Analysis of 3D images from intraoral scanner could detect and monitor NCCL progression, although this ability was limited on incipient lesions. Overall good agreement was found between the test method and optical profilometry. CLINICAL RELEVANCE: The suggested method may be applicable to detect and monitor NCCLs clinically.

Monitoring of simulated occlusal tooth wear by objective outcome measures.

OBJECTIVES: This in vitro study explored quantitative outcome measures as clinical indicators of simulated occlusal tooth wear progression. METHODS: Ten sound, extracted human premolars were selected and submitted to occlusal tooth wear simulation in 0.5-mm steps (0/0.5/1.0/1.5 mm). At each step, enamel thickness on the buccal cusp tips was evaluated using cross-polarization optical coherence tomography (CP-OCT) and micro-computed tomography (µ-CT). The occlusal surface of each premolar was also scanned at each step using a 3D digital intraoral scanner, followed by morphological characterization using standard topography attributes (Slope, Relief, RFI, OPCr). Repeated measures ANOVA assessed differences in simulated wear levels for the µ-CT and CP-OCT data as well as the topography values. Correlations were also calculated between the µ-CT/CP-OCT and topography data. RESULTS: Significant differences were observed for enamel thickness at each simulation wear stage, for both CP-OCT (p < 0.001) and µ-CT (p < 0.001), with good agreement between methods (intraclass correlation: 0.89). For topography analysis, as wear increased, the average Slope, RFI, and Relief values decreased, and average OPCr values increased, with more significant differences shown for Slope. Slope showed significant (p < 0.05) positive correlations with CP-OCT. OPCr showed significant negative correlations with µ-CT, and CP-OCT (p < 0.05). RFI and Relief were not correlated with either µ-CT or CP-OCT (p > 0.05). CONCLUSIONS: Our findings suggest the potential of PS-OCT for measuring enamel thickness changes in the cusp tips of the occlusal surface. Similarly, conventional intraoral scanners can serve effectively for monitoring overall tooth wear when combined with dental topographic analyses of resultant point clouds. CLINICAL SIGNIFICANCE: CP-OCT measures of enamel thickness and dental 3D topographic attributes showed potential as objective outcomes for the clinical monitoring of occlusal tooth wear. Their combination provided a comprehensive understanding of the tooth wear development process.

The dental microwear of hard-object feeding in laboratory Sapajus apella and its implications for dental microwear formation.

OBJECTIVES: This study seeks to determine if (a) consumption of hard food items or a mixture of food items leads to the formation of premolar or molar microwear in laboratory capuchin monkeys (Sapajus apella) in one feeding session and (b) rates of microwear formation are associated with the number of food items consumed. MATERIALS AND METHODS: Five adult male capuchins were used in two experiments, one where they were fed unshelled Brazil nuts, and the other where they were fed a mixture of food items. Dental impressions were taken before and after each feeding session. Epoxy casts made from those impressions then were used in SEM analyses of rates of microwear formation. Upper and lower premolars and molars were analyzed. Qualitative comparisons were made and Spearman's rank-order correlations used to examine the relationship between rates of microwear formation and number of Brazil nuts consumed. RESULTS: Premolars and molars generally showed new microwear in the form of pits and scratches. However, the incidence of those features was low (0-6%). Rates of microwear formation were highest during the consumption of Brazil nuts. DISCUSSION: Variations in the rate of microwear formation on the premolars likely reflected patterns of ingestion whereas consistency in the rate of microwear on the molars likely reflected patterns of chewing. While dental microwear formation seemed to be correlated with the number of hard objects consumed, rates did differ between individuals. Differences in results between the two experiments demonstrate some of the limitations in our knowledge of dental microwear formation.

Dental microwear and Pliocene paleocommunity ecology of bovids, primates, rodents, and suids at Kanapoi.

Reconstructions of habitat at sites like Kanapoi are key to understanding the environmental circumstances in which hominins evolved during the early Pliocene. While Australopithecus anamensis shows evidence of terrestrial bipedality traditionally associated with a more open setting, its enamel has low δ13C values consistent with consumption of C3 foods, which predominate in wooded areas of tropical Africa. Habitat proxies, ranging from paleosols and their carbonates to associated herbivore fauna and their carbon isotope ratios, suggest a heterogeneous setting with both grass and woody plant components, though the proportions of each have been difficult to pin down. Here we bring dental microwear texture analysis of herbivorous fauna to bear on the issue. We present texture data for fossil bovids, primates, rodents, and suids (n = 107 individuals in total) from the hominin bearing deposits at Kanapoi, and interpret these in the light of closely related extant mammals with known differences in diet. The Kanapoi bovid results, for example, are similar to those for extant variable grazers or graze-browse intermediate taxa. The Kanapoi suid data vary by taxon, with one similar to the pattern of extant grazers and the other more closely resembling mixed feeders. The Kanapoi primates and rodents are more difficult to associate with a specific environment, though it seems that grass was likely a component in the diets of both. All taxa evince microwear texture patterns consistent with a mosaic of discrete microhabitats or a heterogeneous setting including both tree and grass components.

Evidence of strong stabilizing effects on the evolution of boreoeutherian (Mammalia) dental proportions.

The dentition is an extremely important organ in mammals with variation in timing and sequence of eruption, crown morphology, and tooth size enabling a range of behavioral, dietary, and functional adaptations across the class. Within this suite of variable mammalian dental phenotypes, relative sizes of teeth reflect variation in the underlying genetic and developmental mechanisms. Two ratios of postcanine tooth lengths capture the relative size of premolars to molars (premolar-molar module, PMM), and among the three molars (molar module component, MMC), and are known to be heritable, independent of body size, and to vary significantly across primates. Here, we explore how these dental traits vary across mammals more broadly, focusing on terrestrial taxa in the clade of Boreoeutheria (Euarchontoglires and Laurasiatheria). We measured the postcanine teeth of N = 1,523 boreoeutherian mammals spanning six orders, 14 families, 36 genera, and 49 species to test hypotheses about associations between dental proportions and phylogenetic relatedness, diet, and life history in mammals. Boreoeutherian postcanine dental proportions sampled in this study carry conserved phylogenetic signal and are not associated with variation in diet. The incorporation of paleontological data provides further evidence that dental proportions may be slower to change than is dietary specialization. These results have implications for our understanding of dental variation and dietary adaptation in mammals.

Dental microwear of living Hadza foragers.

OBJECTIVES: Studies of dental microwear of bioarchaeological assemblages and extant mammals from museum collections show that surface texture can provide a valuable proxy for reconstructing diets of past peoples and extinct species. However, no study to date has focused on occlusal surface microwear textures of living hunter-gatherers. Here we present the first such study of the Hadza foragers of Tanzania. METHODS: We took high-resolution dental impressions of occlusal surfaces for a total of 43 molds representing 25 men and women, 1-3 samples each, at different times during the rainy and dry seasons. Dental replicas were prepared and scanned by confocal profilometry and standard microwear texture parameters were calculated. Central tendencies and dispersions of variable scores were compared by season and by sex. RESULTS: We found no differences between sexes or seasons in texture attribute central tendency, but some for dispersion. Females had notably low microwear texture dispersion in the dry season while males had higher dispersion in some attributes, particularly in the dry season. These differences seem to be driven primarily by low variance among females in the dry season. CONCLUSIONS: This study demonstrates microwear texture data can be generated for living foragers. Given caveats of small samples available and consideration of foraging groups in transition, this study hints at variation in microwear texture dispersion between sexes and seasons for the Hadza, suggesting that such analyses might be of value for assessing hunter-gatherer diet.

Incorporating intraspecific variation into dental microwear texture analysis.

Dental microwear texture analysis (DMTA) quantifies microscopic scar or wear patterns left on teeth by different foods or extraneous ingested items such as grit. It can be a powerful tool for deducing the diets of extinct mammals. Here we investigate how intraspecific variation in the dental microwear of macropodids (kangaroos and their close relatives) can be used to maximize the dietary signal inferable from an inherently limited fossil record. We demonstrate significant intraspecific variation for every factor considered here for both scale-sensitive fractal analysis and International Organization for Standardization surface texture analysis variables. Intraspecific factors were then incorporated into interspecific (dietary) analyses through the use of Linear Mixed Effects modelling, incorporating Akaike's Information Criterion to compare models, and testing models through independent cross-validation. This revealed that for each DMTA variable only a small number of intraspecific factors need to be included to improve differentiation between species. Including specimen as a random factor accounted for stochastic inter-individual variation, and facet, incorporated effects of sampling location. Intraspecific effects of ecoregion, microscope, tooth position and wear were often but not universally important. We conclude that models of microwear data that include intraspecific variation can improve the resolution of dietary reconstructions.

Correction to: 'Comment on van Casteren et al. (2018): softer metallic spheres do abrade harder enamel'.

[This corrects the article DOI: 10.1098/rsos.181376.].

Technical note: Comparing dental topography software using platyrrhine molars.

OBJECTIVES: There remain many idiosyncrasies among the values calculated for varying dental topography metrics arising from differences in software preferences among research groups. The aim of this work is to compare and provide potential conversion formulae for dental topography metrics calculated using differing software platforms. METHODS: Three software packages: ArcGIS, Surfer Manipulator, and molaR were used to calculate orientation patch count rotated (OPCR), Dirichlet normal energy (DNE), occlusal relief (OR), slope (m), and angularity (a) on platyrrhine second upper molars. Values derived from the various software packages were compared for distributional consistency and correlation. Where appropriate, formulae for conversion between like measures calculated on different software platforms were developed. RESULTS: When compared with the same measurement across software, OPCR, OR, and slope were all highly correlated. However, only OR demonstrated distributional consistency (i.e., nearly consistent mean, median, max, and min). Slope and OPCR were both higher when calculated by molaR as compared to Surfer Manipulator and ArcGIS calculations, conversion formulae are provided for these measures. DNE is only weakly correlated with angularity; but is correlated with orientation patch count across taxa. DISCUSSION: We explore why there is variation in the dental topography values calculated among the various software packages. The conversion formulae provided in this work will make possible direct comparisons among studies conducted across multiple research groups.

The phylogenetic signal in tooth wear: What does it mean?

A new study by Fraser et al (2018) urges the use of phylogenetic comparative methods, whenever possible, in analyses of mammalian tooth wear. We are concerned about this for two reasons. First, this recommendation may mislead the research community into thinking that phylogenetic signal is an artifact of some sort rather than a fundamental outcome of the evolutionary process. Secondly, this recommendation may set a precedent for editors and reviewers to enforce phylogenetic adjustment where it may unnecessarily weaken or even directionally alter the results, shifting the emphasis of analysis from common patterns manifested by large clades to rare cases.

Trend-analysis of dental hard-tissue conditions as function of tooth age.

OBJECTIVE: This retrospective in-vitro study investigated tooth age effect on dental hard-tissue conditions. METHODS: Unidentified extracted premolars (n = 1500) were collected and their individual age was estimated (10-100 (±10) years old (yo)) using established dental forensic methods Dental caries, fluorosis and tooth wear (TW) were assessed using the International Caries Detection and Assessment System (ICDAS; 0-5 for crown and 0-2 for root), Thylstrup-Fejerskov (TFI; 0-9) and Basic Erosive Wear Examination (BEWE; 0-3) indices, respectively. Staining and color were assessed using the modified-Lobene (MLI) (0-3) and VITA shade (B1-C4) indices, respectively. Relationships between indices and age were tested using regression models. RESULTS: Starting at age ∼10yo, presence of caries increased from 35% to 90% at ∼50yo (coronal), and from 0% to 35% at ∼80yo (root). Caries severity increased from ICDAS 0.5 to 2 at ∼40yo and from ICDAS 0 to 0.5 at ∼60yo for coronal and root caries, respectively. Presence of TW increased from 25% (occlusal) and 15% (smooth-surfaces) to 100% at ∼80yo. TW severity increased from BEWE 0.5 to 2 at ∼50yo (occlusal) and ∼0.3 to 1.5 at ∼50yo (smooth-surfaces). Percentage and severity of fluorosis decreased from 70% to 10% at ∼80yo, and from TFI 1 to 0 at ∼90yo, respectively. Percentage of extrinsic staining increased from 0% to 85% at ∼80yo and its severity increased from MLI 0 to 2 at ∼70yo. Color changed from A3 to B3 at ∼50yo (crown), and from C2 to A4 at ∼85yo (root). CONCLUSIONS: Aging is proportionally related to the severity of caries, TW, staining, and inversely to dental fluorosis. Teeth become darker with age.