Finite element modelling of the pelvis: inclusion of muscular and ligamentous boundary conditions.

Previous finite element studies of the pelvis, including subject-specific studies have made extensive simplifications with regards to the boundary conditions used during analysis. Fixed boundary conditions are generally utilised at the pubis and superior part of the ilium. While it can be demonstrated that these models provide a close match for certain in vitro experiments that use similar boundary conditions, the resulting stress-strain fields in the cortex in particular are unlikely to be those found in vivo. This study presents a finite element analysis in which the pelvis is supported by muscular and ligamentous boundary conditions, applied using spring elements distributed over realistic attachment sites. The analysis is compared to an analysis in which the pelvis is restrained by fixed boundary conditions applied at the sacro-iliac joints. Striking differences in the stress-strain fields observed in cortical bone in particular, are found between the two analyses. The inclusion of muscular and ligamentous boundary conditions is found to lower the occurrence of stress concentrations within the cortex.

3D non-linear analysis of the acetabular construct following impaction grafting.

The study investigates the short-term behaviour of the acetabular construct following revision hip arthroplasty, carried out using the Slooff-Ling impaction grafting technique; using 3D finite element analyses. An elasto-plastic material model is used to describe the constitutive behaviour of morsellised cortico-cancellous bone (MCB) graft, since it has been shown that MCB undergoes significant plastic deformation under normal physiological loads. Based on previous experimental studies carried out by the authors and others, MCB is modelled using non-linear elasticity and Drucker Prager Cap (DPC) plasticity. Loading associated with walking, sitting down, and standing up is applied to the acetabular cup through a femoral head using smooth sliding surfaces. The analyses yield distinctive patterns of migration and rotation due to different activities. These are found to be similar to those observed in the clinical setting.

The elastic properties of morsellised cortico-cancellous bone graft are dependent on its prior loading.

Confined compression experiments were carried out on cortico-cancellous bone taken from bovine femoral condyles to assess the effect of prior loading on the elastic confined modulus, E(c) of morsellised cortico-cancellous bone (MCB). Measurements were taken to find the values of E(c) for MCB subjected to cyclic loading resulting in axial stresses in the range of 0.5-3.0 N mm(2). Two values of E(c) were considered: E(ic), the instantaneous modulus, and E(dc), the delayed modulus allowing for stress relaxation effects. It was found that the values of E(c) increased with increasing maximum axial stress. It was also found that for each stress level the values of E(c) increased as the number of load cycles increased. The dependence of E(c) on the maximum axial stress and the number of load cycles is seen to explain the wide range of values for the apparent modulus of MCB found in previous studies. Tests examining the stress relaxation behaviour of MCB are also discussed. The results indicate that a minimum of 10 compaction episodes are required for MCB to achieve around 90% of its predicted maximum stiffness for a given compaction force.

The effect of acetabular cup size on the short-term stability of revision hip arthroplasty: a finite element investigation.

The study uses idealized two-dimensional finite element models to examine the behaviour of the acetabular construct following revision hip arthroplasty, carried out using the Slooff-Ling impaction grafting technique. The behaviour of bone graft was considered in detail, with non-linear elasticity and non-associated plasticity being adopted. Load was applied to the acetabular construct through a femoral head using smooth sliding surfaces. In particular, four models were subjected to two idealized cyclic load cases to investigate the effect of acetabular cup size on the short-term stability of the acetabular construct. The study suggests that benefits may be gained by using the largest practical size of acetabular cup.

Trichoblastic carcinoma: a report of two cases of a deeply infiltrative trichoblastic neoplasm.

BACKGROUND: Trichoblastoma is a benign neoplasm with primitive hair follicle differentiation. The tumor is characterized by nests and cords of epithelial cells in an organized relationship with stroma. Some of the epithelial cells resemble follicular germ and other cells show follicular sheath differentiation. The neoplasm is symmetrical and well circumscribed. In addition, cytologic examination shows no atypia. Concept of its malignant counterpart is poorly understood. OBJECTIVE: We report two trichoblastic neoplasms that show histologic features of malignancy. METHODS: Skin biopsies from the lip region of a 53-year-old female and a 74-year-old male who had presented with the neoplasms in that location for several years were reviewed. Excised specimens measured 2 x 1 x 1 cm and 1.6 x 0.7 x 0.8 cm respectively. RESULTS: The histologic sections revealed locally aggressive neoplasms showing prominent differentiation towards hair germ and follicular sheath with formation of papillary mesenchymal bodies, follicular bulb-like structures, small keratin cysts and rare malformed hair shaft. The neoplasm showed asymmetry of architecture and massive subcutaneous and muscular infiltration. CONCLUSION: With demonstration of these two cases and references of few other reported cases we raise the possibility of existence of trichoblastic carcinoma that is distinct from basal cell carcinoma.

Dermatofibroma-like granular cell tumor.

BACKGROUND: There have been several reports in the literature of dermatofibromas with granular cells. Here we report a granular cell tumor with the architecture of a dermatofibroma. This is the first report of this histological variant of granular cell tumor. The lesion was a 2.5-cm oval, hyperpigmented plaque present for "years" on the back of a 60-year-old African-American woman. METHODS: The specimen was processed using formalin fixation and paraffin embedding. Tissue sections were stained with hematoxylin and eosin. Immunohistochemical studies were performed with antibodies directed against S-100 protein, neuron-specific enolase, and factor XIIIa. RESULTS: Histopathologic examination revealed granular cells, some of which were spindle shaped, distributed singly and in small groups between collagen bundles resembling a dermatofibroma. Immunohistochemical studies showed the tumor cells to be positive for S-100 and neuron-specific enolase and negative for factor XIIIa. CONCLUSION: The immunohistochemical findings support the diagnosis of a granular cell tumor with a dermatofibroma-like pattern.

Mechanical considerations in impaction bone grafting.

In impaction grafting of contained bone defects after revision joint arthroplasty the graft behaves as a friable aggregate and its resistance to complex forces depends on grading, normal load and compaction. Bone mills in current use produce a distribution of particle sizes more uniform than is desirable for maximising resistance to shear stresses. We have performed experiments in vitro using morsellised allograft bone from the femoral head which have shown that its mechanical properties improve with increasing normal load and with increasing shear strains (strain hardening). The mechanical strength also increases with increasing compaction energy, and with the addition of bioglass particles to make good the deficiency in small and very small fragments. Donor femoral heads may be milled while frozen without affecting the profile of the particle size. Osteoporotic femoral heads provide a similar grading of sizes, although fewer particles are obtained from each specimen. Our findings have implications for current practice and for the future development of materials and techniques.