Revealing Phase Transition in Ni-Rich Cathodes via a Nondestructive Entropymetry Method.

With the expanding requirements of recent energy regulations and economic interest in high-performance batteries, the need to improve battery energy density and safety has gained prominence. High-energy-density lithium batteries, employed in next-generation energy storage devices, rely on nickel-rich cathode materials. Since they have extremely high charge/discharge capacity, high operating voltage, prolonged cycle life, and lower cost, nickel-rich cathode materials such as Ni-rich NCM (LiNix > 0.8CoyMnzO2) and Ni-rich NCA (LiNix > 0.8CoyAlzO2) are of particular interest to researchers. Several in situ characterization methodologies are currently used to understand lithium-ion battery electrode response and deterioration better. Nevertheless, in many contexts, these measurement methodologies must be combined with specially designed cells and electrode materials with distinct forms, which is sometimes inconvenient. As an alternative, thermo-voltammetric dynamic characterization may be utilized to describe the thermal internal characteristics of various electrode materials, such as the structural changes and electrode reactions that occur during charging and discharging. In this paper, a nondestructive entropy measurement method demonstrates that phase change occurs for NCM (LiNi0.83Co0.12Mn0.05O2) and NCA (LiNi0.88Co0.09Al0.03O2) at 40-30% of state of charge (SOC) and 90-80% of SOC, respectively. This is confirmed by ex situ X-ray diffraction (XRD) measurements for these highly popular cathodes.

Annealing Optimization of Lithium Cobalt Oxide Thin Film for Use as a Cathode in Lithium-Ion Microbatteries.

The microbatteries field is an important direction of energy storage systems, requiring the careful miniaturization of existing materials while maintaining their properties. Over recent decades, LiCoO2 has attracted considerable attention as cathode materials for lithium-ion batteries due to its promising electrochemical properties for high-performance batteries. In this work, the thin films of LiCoO2 were obtained by radio-frequency magnetron sputtering of the corresponding target. In order to obtain the desired crystal structure, the parameters such as annealing time, temperature, and heating rate were varied and found to influence the rhombohedral phase formation. The electrochemical performances of the prepared thin films were examined as a function of annealing time, temperature, and heating rate. The LiCoO2 thin film cathode annealed at 550 °C for 1 h 20 min demonstrated the best cycling performance with a discharge specific capacity of around 135 mAh g-1 and volumetric capacity of 50 µAh cm-2µm-1 with a 77% retention at 0.5 C rate.

Physical properties of carbon nanowalls synthesized by the ICP-PECVD method vs. the growth time.

Investigation of the physical properties of carbon nanowall (CNW) films is carried out in correlation with the growth time. The structural, electronic, optical and electrical properties of CNW films are investigated using electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, UV-Vis spectroscopy, Hall Effect measurement system, Four Point Probing system, and thermoelectric measurements. Shorter growth time results in thinner CNW films with a densely spaced labyrinth structure, while a longer growth time results in thicker CNW films with a petal structure. These changes in morphology further lead to changes in the structural, optical, and electrical properties of the CNW.