A Community-Based Cross-Sectional Study on Awareness and Acceptance of Homosexuality in Coimbatore.

INTRODUCTION: Acceptance of the lesbian, gay, bisexual, transgender, and queer/questioning (LGBTQ) community among the public varies greatly depending on cultural and social factors. The present study estimated homosexuality acceptance and the factors influencing its recognition among the general population in Coimbatore, Tamil Nadu, India. METHODS: This cross-sectional study was performed among people residing in urban and rural field practice areas of a tertiary care hospital in Coimbatore. Using a multistage random sampling method, people over 18 years of age were selected. A total of 670 individuals participated, and data was obtained. Data on sociodemographic characteristics and homosexuality acceptance were collected using the Homosexuality Attitude Scale. RESULTS: Overall, homosexuality acceptance was 61% among the community. Homosexuality acceptance was significantly associated with age (p<0.001), residence (p=0.014), marital status (p<0.001), religion (p<0.001), education (p=0.001), and occupation (p<0.001). CONCLUSION: Overall acceptance was better among young participants as compared to the elders. Thus, our study highlights the need for a shift in perspective among the older generation, which may significantly improve their overall acceptance of homosexuality.

Microwave assisted sol-gel approach for Zr doped TiO2 as a benign photocatalyst for bismark brown red dye pollutant.

A microwave supported sol-gel approach was developed in this study to fabricate Zr-doped TiO2 mesoporous nanostructures for efficient photocatalytic activity on bismark brown red (BBR) dye under visible light illumination. Sophisticated analytical techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy (EDX), X-ray fluorescence analysis (XRF), Fourier transform infrared (FT-IR), ultraviolet-visible diffuse reflectance (UV-vis-DRS) spectroscopy and Brunauer-Emmet-Teller (BET) surface area analyses were used to obtain their structural, electrical: optical and spectroscopic characteristics. The analysis results revealed that the developed nanostructures exhibited strong broad absorption in the visible region with good adsorption capacity and thus enhanced photocatalytic performance. The average crystallite size was found to be 12.5 nm (UTO), 6.4 nm (ZT4), and 4.7 nm (ZT4M4) respectively. The nanocatalysts (ZT4M4) showed a decrease in bandgap and particle size with an increase in the surface area of the Zr-TiO2 nanoparticles (119 m2 g-1). In comparison to previous studies on the photocatalytic degradation of BBR dye under visible light irradiation employing Ni-S co-doped (110 min), Cu-doped TiO2 (75 min), etc., ZT4M4 exhibited a remarkable degradation rate of 99% in 50 minutes. This may be due to the hydroxyl radicals being the principle reactive species responsible for the BBR dye oxidative degradation. The present study showed that ZT4M4 was found to be the best photocatalyst for the BBR dye degradation under the optimal conditions.

NmtA, a novel metallothionein of Anabaena sp. strain PCC 7120 imparts protection against cadmium stress but not oxidative stress.

Metallothioneins (MTs) are low molecular weight, sulfhydryl-containing, cysteine-rich, metal-binding proteins. Eukaryotes have multiple metallothionein genes; however, there is dearth of reports on prokaryotic metallothioneins. Bacterial MTs with SmtA from Synechococcus PCC 7942 as prototype have been studied in the context of cadmium detoxification. In this study, a smtA related ORF, namely nmtA, was identified in the heterocystous, nitrogen-fixing cyanobacterium, Anabaena PCC 7120. A recombinant N-terminal histidine-tagged Anabaena NmtA protein was overexpressed in Escherichia coli and purified. The protein was identified by peptide mass fingerprinting using MALDI-TOF Mass Spectrometry as putative metallothionein of Anabaena PCC 7120 with a calculated mass of ∼6.1 kDa. While the native metallated NmtA exhibited resistance against proteolysis, metal free apo-NmtA resulting from acid and dithiothreitol (DTT) treatment could be digested by proteinase K revealing a metal dependent proteolytic protection of NmtA. Expression of nmtA in Anabaena PCC 7120 was induced evidently by cadmium, zinc and copper but not by uranium or hydrogen peroxide. Recombinant Anabaena PCC 7120 overexpressing NmtA protein revealed superior cadmium tolerance but showed limited influence against oxidative stress tolerance as compared with the strain carrying vector alone. In contrast, a mutant of Synechococcus PCC 7942 deficient in MT locus was found to be highly susceptible to H2O2 indicating a likely involvement of cyanobacterial MT in protection against oxidative damage. Overall, the study improved our understanding of metal tolerance mechanisms in Anabaena PCC 7120 by demonstrating a key role of NmtA in cadmium tolerance.

Zinc Transporter Protein (tzn-1) May Also Play a Role in Conidiation Pathway of Neurospora crassa: An Insight Using Proteogenomic Approach.

BACKGROUND: Zinc transporter (tzn-1) of Neurospora crassa plays a crucial role in conidiation pathway, as its removal results in aconidiation which was reported in our earlier studies. OBJECTIVES: The main objective of this study was to analyze the role of tzn-1 in conidiation process, by comparing knockout (KO) mutants zinc transporter KO (Δtzn-1) and aconidiating gene KO (Δacon-3) with wild oak ridge (OR) 74 'A' strain by 'Proteo-genomic' approach. METHODS: To identify the commonly expressed protein spots in knockout (KO) mutants zinc transporter KO (Δtzn-1) and aconidiating gene KO (Δacon-3) by comparing with wild oak ridge (OR) 74 'A' strain. Two sets (Δtzn-1 to wild and Δacon-3 to wild) were analyzed by combining 2- Dimensional gel electrophoresis (2DE) with Matrix Associated Laser Desortion/Ionization mass spectrometry -Peptide Mass Fingerprint (MALDI-PMF). Then, the peptide sequences which were obtained by MASCOT (database software) were identified by FGSC BLASTp search analysis. Finally, to evaluate the expression of the KO mutants zinc transporter KO (Δtzn-1) and aconidiating gene KO (Δacon-3) in comparison to wild (OR) 74 'A' type was analyzed by Quantitative Real Time Polymerase Chain Reaction (qRT-PCR) studies. RESULTS: 2DE and MALDI-PMF has shown the nine commonly overexpressed protein spots from the two sets (Δtzn-1 to wild and Δacon-3 to wild). Peptide sequences were obtained by MASCOT (database software) analysis and peptide sequences were identified by FGSC BLASTp search. Eight sequences have shown the similarities with the genes involved during the early stages of conidial and sexual development. Our qRT-PCR analysis has shown that tzn-1 gene was upregulated in contrast to acon-3 gene in absence of iron concentration and down regulated with increase in iron concentrations in wild samples. With increase in zinc supplements, the tzn-1 gene is normally regulated and shown contrasting feature in absence of zinc and acon-3 gene is normally regulated both in presence and absence of zinc. At regular time intervals, declined growth rate was observed after 18hours of induction. CONCLUSION: Thus, we conclude that tzn-1 and acon-3 genes were actively participating in early stages of conidial process and metal ions play some crucial role in the development of the organism.

Rapid detection of oral cancer using Ag-TiO2 nanostructured surface-enhanced Raman spectroscopic substrates.

The unique vibrational signatures of the biochemical changes in tissue samples may enable the Raman spectroscopic detection of diseases, like cancer. However, the Raman scattering cross-section of tissues is relatively low and hence the clinical translation of such methods faces serious challenges. In this study, we report a simple and efficient surface-enhanced Raman scattering (SERS) substrate, for the rapid and label-free detection of oral cancer. Raman active silver (Ag) surfaces were created on three distinct titania (TiO2) hierarchical nanostructures (needular, bipyramidal and leaf-like) by a process involving a hydrothermal reaction, followed by the sputter deposition of Ag nanoparticles (average size: 30 nm). The resulting SERS substrate efficiencies, measured using crystal violet (CV) as an analyte molecule, showed a highest analytical enhancement factor of ∼106, a detection limit ∼1 nM and a relative standard deviation of the Raman peak maximum of ∼13% for the nano-leafy structure. This substrate was used to analyze tissue sections of 8 oral cancer patients (squamous cell carcinoma of tongue) comprising a total of 24 normal and 32 tumor tissue sections and the recorded spectra were analyzed by principal component analysis and discriminant analysis. The tissue spectra were correctly classified into tumor and normal groups, with a diagnostic sensitivity of 100%, a specificity of 95.83% and the average processing time per patient of 15-20 min. This indicates the potential translation of the SERS method for the rapid and accurate detection of cancer.

Osteointegration of titanium implant is sensitive to specific nanostructure morphology.

An important aspect of orthopedic implant integration is the enhancement of functional activity of osteoblasts at the tissue-implant interface without any fibrous tissue intervention. Nanostructured implant surfaces are known to enhance osteoblast activity. Previously, we have reported a simple hydrothermal method for the fabrication of non-periodic nanostructures (nanoscaffold, nanoleaves and nanoneedles) on titanium implants showing good biocompatibility and a distinct osteoblast response in vitro in terms of osteoblast adhesion to the surface. In the present work, these nanostructures have been evaluated for their detailed in vitro cellular response as well as in vivo osteointegration. Our studies showed that a specific surface nanomorphology, viz. nanoleaves, which is a network of vertically aligned, non-periodic, leaf-like structures with thickness in the nanoscale, provided a distinct increase in osteoblast cell proliferation, alkaline phosphatase (ALP) activity and collagen synthesis compared to several other types of nanomorphology, such as nanotubes, nanoscaffold and nanoneedles (rods). Gene expression analysis of ALP, osteocalcin, collagen, decorin and Runx2 showed ~20- to 40-fold up-regulation on the leaf-like topography. Cytoskeletal arrangement studies on this substrate again revealed a unique response with favorable intracellular protein expressions of vinculin, FAK and src. In vivo osteointegration study over 12 weeks on rat model (Sprague-Dawley) showed early-stage bone formation (60% bone contact by week 2 and ~85% by week 8, p<0.01) in the leaf-like nanopattern, without any inflammatory cytokine production.

Preparation, characterization, bioactive and cell attachment studies of alpha-chitin/gelatin composite membranes.

The chitin/gelatin composite membranes were prepared by mixing of chitin hydrogel with gelatin. The prepared composite membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, enzymatic degradation and thermal studies. The XRD pattern of the chitin/gelatin composite membranes showed almost the same pattern as alpha-chitin. The bioactivity studies of these chitin/gelatin membranes were carried out with the simulated body fluid solution (SBF) for 7, 14 and 21 days followed by the characterization with the scanning electron microscopy (SEM) and Energy Dispersive Spectrum (EDS) studies. The SEM and EDS studies confirmed the formation of calcium phosphate layer on the surface of chitin/gelatin membranes. Biocompatibility of the chitin/gelatin membrane was assessed using human MG-63 osteoblast-like cells. After 48 h of incubation, it was found that the cells had attached and completely covered the membrane surface. Thus, the prepared chitin/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications.

Wet chemical synthesis of chitosan hydrogel-hydroxyapatite composite membranes for tissue engineering applications.

Chitosan, a deacetylated derivative of chitin is a commonly studied biomaterial for tissue-engineering applications due to its biocompatibility, biodegradability, low toxicity, antibacterial activity, wound healing ability and haemostatic properties. However, chitosan has poor mechanical strength due to which its applications in orthopedics are limited. Hydroxyapatite (HAp) is a natural inorganic component of bone and teeth and has mechanical strength and osteoconductive property. In this work, HAp was deposited on the surface of chitosan hydrogel membranes by a wet chemical synthesis method by alternatively soaking the membranes in CaCl(2) (pH 7.4) and Na(2)HPO(4) solutions for different time intervals. These chitosan hydrogel-HAp membranes were characterized using SEM, AFM, EDS, FT-IR and XRD analyses. MTT assay was done to evaluate the biocompatibility of these membranes using MG-63 osteosarcoma cells. The biocompatibility studies suggest that chitosan hydrogel-HAp composite membranes can be useful for tissue-engineering applications.