Exploring chiral separation of 3-carboxamido-5-aryl isoxazole derivatives by supercritical fluid chromatography on amylose and cellulose tris dimethyl- and chloromethyl phenylcarbamate polysaccharide based stationary phases.

Four polysaccharide based chiral stationary phases were chosen, two chlorinated: Lux™ Amylose-2 (tris-5-chloro-2-methylphenylcarbamate of amylose) and Lux™ Cellulose-2 (tris-3-chloro-4-methylphenylcarbamate of cellulose) and two methylated: Chiralpak® AD-H (tris-3,5-dimethylphenylcarbamate of amylose) and Chiralcel® OD-H (tris-3,5-dimethylphenylcarbamate of cellulose) to separate four 3-carboxamido-5-aryl isoxazole derivatives by supercritical fluid chromatography. The effect of chiral stationary phase, co-solvent nature (MeOH, EtOH, 2-PrOH and ACN) and percentage (10-20%), temperature (20-45°C) and chemical structure of the compounds on retention, resolution and elution order were thoroughly studied. In addition, thermodynamic parameters were determined from the linear portion of the Van't Hoff plots. For all the derivatives, the Lux™ Cellulose-2 and Chiralpak® AD-H provided excellent resolutions (Rs=9.78) in short run time (under 6min). The preparation of about 10mg of each of the eight enantiomers was achieved successfully on a Chiralpak® AD-H with various percentages of ethanol as a co-solvent. Lastly, the enantiomeric purity of each of the eight individual enantiomer generated was determined and found higher than 98%.

Evaluation of three neutral capillary coatings for the determination of analyte-cyclodextrin binding constants by affinity capillary electrophoresis. Application to N,N'-disubstituted piperazine derivatives.

The performances of three neutral static coatings (hydroxypropyl cellulose, polyethylene oxide and poly(N,N-dimethylacrylamide) have been evaluated in order to determine the binding constants of the complexes formed between four polycationic compounds (piperazine derivatives) and four cyclodextrins of pharmaceutical interest (ß-CD, HP-ß-CD, Me-ß-CD and sulfobutyl ether-ß-CD) by affinity capillary electrophoresis. The physically-adsorbed poly(N,N-dimethylacrylamide) coating proves to be the more efficient to mask the silanol groups of the capillary wall since the lowest electroosmotic flow was measured for this coating. Moreover, it drastically reduces the adsorption of the compounds since it allows a correct repeatability of their migration time, higher efficiencies of the peaks and no baseline shift. Then, it was verified for four complexes that this coating allows a correct determination of the binding constants avoiding the CD adsorption which is responsible of an undervaluation of binding constants. The highest binding constants are obtained using the anionic sulfobutyl ether-ß-CD (SBE-ß-CD). The structure of the complex formed between the tacrine derivative and the SBE-ß-CD was further investigated through 2D ROESY NMR experiments and structure-binding constant relationships. Results suggest that the inclusion in the SBE-ß-CD cavity occurs through the aliphatic ring portion of the tacrine moiety.

Design of experiments for enantiomeric separation in supercritical fluid chromatography.

A new chiral melatoninergic ligand, potentially successor of Valdoxan(®), presenting an improved pharmacological profile with regard to agomelatine, was chosen as a probe for a supercritical fluid chromatographic separation carried-out on an amylose tris[(S)-1-α-methylbenzylcarbamate] based stationary phase. The goal of this work was to optimize simultaneously three factors identified to have a significant influence to obtain the best resolution in the shortest analysis time (i.e., retention time of the second eluting enantiomer) for this chiral compound. For this purpose a central circumscribed composite (CCC) design was developed with three factors: the flow-rate, the pressure outlet and the percentage of ethanol to optimize of two responses: shortest analysis time and best resolution. The optimal conditions obtained via the optimizer mode of the software (using the Nelder-Mead method) i.e., CO2/EtOH 86:14 (v:v), 104bar, 3.2mLmin(-1) at 35°C lead to a resolution of 3.27 in less than 6min. These conditions were transposed to a preparative scale where a concentrated methanolic solution of 40mM was injected with a sample loop of 100µL. This step allowed to separate an amount of around 65mg of racemic melatonin ligand in only 3h with impressive yields (97%) and enantiomeric excess (99.5%).

Comparison of high-performance liquid chromatography and supercritical fluid chromatography using evaporative light scattering detection for the determination of plasticizers in medical devices.

Recently, interest in supercritical fluid chromatography (SFC) has increased due to its high throughput and the development of new system improving chromatographic performances. However, most papers dealt with fundamental studies and chiral applications and only few works described validation process of SFC method. Likewise, evaporative light scattering detection (ELSD) has been widely employed in liquid chromatography but only a few recent works presented its quantitative performances hyphenated with SFC apparatus. The present paper discusses about the quantitative performances of SFC-ELSD compared to HPLC-ELSD, for the determination of plasticizers (ATBC, DEHA, DEHT and TOTM) in PVC tubing used as medical devices. After the development of HPLC-ELSD, both methods were evaluated based on the total error approach using accuracy profile. The results show that HPLC-ELSD was more precise than SFC-ELSD but lower limits of quantitation were obtained by SFC. Hence, HPLC was validated in the ± 10% acceptance limits whereas SFC lacks of accuracy to quantify plasticizers. Finally, both methods were used to determine the composition of plasticized-PVC medical devices. Results demonstrated that SFC and HPLC both hyphenated with ELSD provided similar results.

Quantitative analysis of drugs in biological matrices by HPLC hyphenated to fluorescence detection.

An overview of the state-of-the art in HPLC coupled with fluorescence detection is presented. Over the last 20 years, the increasing number of methodological papers on this topic (4082 between 1994 and 2004 and 7725 between 2004 and 2014) is testament to its utility in bioanalytical applications. Compared with conventional UV absorbance detection used in HPLC, fluorescence detection can greatly enhance the sensitivity leading to limits of detection similar to those obtained with mass spectrometry, offering researchers a sensitive, robust and relatively inexpensive instrumental method. This work will focus on the analysis of pharmaceutical compounds in different biological matrices, either naturally fluorescent or derivatized with a fluorescent agent, and some of them chiral. Therapeutic applications, sample preparation and derivatization, sensitivity for each example are described.

Evaluation and comparison of three different separation techniques for analysis of retroamide enantiomers and their biological evaluation against h-P2X7 receptor.

The P2X receptors are seven-transmembrane domain G protein-coupled receptors and the 7 subtypes of P2X receptors identified in humans, and named P2X1 to P2X7, are channel receptors whose endogenous ligand is ATP. New antagonists of the P2X7 receptor were developed, since this purinergic receptor was highlighted to be involved in many diseases such as different types of pain, cancer, ischemia, neurodegenerative diseases (including Parkinson's and Alzheimer's diseases) characterized by inflammatory processes. With the aim of evaluate the impact of chirality on the pharmacological activity of a new P2X7R antagonist, a semi-preparative method was developed in supercritical fluid chromatography (SFC). Among four polysaccharide based chiral stationary phases: Chiralcel OD-H and OJ-H and Chiralpak AS-H and AD-H, the last one namely amylose tris (3,5-dimethylphenylcarbamate) with a mobile phase consisted of carbon dioxide-ethanol (80:20, v/v), led to the successful separation of the enantiomers in short run time and with good resolution. Limits of detection and quantification were calculated and were found equal for compound 1, to 1.37 µM and 4.57 µM respectively, for peak 1 and were equal to 1.60 µM and 5.30 µM respectively, for peak 2 at λ=210 nm. Before carrying out the pharmacological evaluation of each enantiomer, two complementary methodologies, e.g. liquid chromatography and capillary electrophoresis were performed in parallel to improve the limits of detection and quantification to assess the enantiomeric purity. HPLC using a Chiralpak AD stationary phase led to four times lower limits of detection and quantification with regard to SFC. In the same time, capillary electrophoresis involving dual cyclodextrins system constituted of a SBE-ß-CD and a MM-ß-CD mixture enhanced the signal-to-noise ratio and led to similar limits of detection and quantification with regard to SFC. No trace of the other enantiomer was found in the isolated one. Biological activities of individual enantiomers were then evaluated and revealed no cytotoxicity against cell lines and a significant difference in terms of their IC50 values with respect to the investigated racemate (6.43 µM): 3.49 µM for the (R)-enantiomer and >10(-4)µM for the (S)-enantiomer, for compound 1, showing that, this antagonist activity is stereospecific.

Enantioseparation and thermodynamic study of naphthalene derivatives, new melatoninergic agonists, on coated amylose [tris(S)-1-phenylethylcarbamate] stationary phase. Transposition to preparative scale.

This work reports a high-performance liquid chromatography normal-phase methodology to elucidate enantiomers of naphthalene derivatives, evaluated as melatoninergic agonists. For this purpose four different polysaccharide based chiral stationary phases were evaluated, namely Chiralcel OD-H (cellulose tris-3,5-dimethylphenylcarbamate), Chiralcel OJ (cellulose tris-methylbenzoate), Chiralpak AD (amylose tris-3,5-dimethylphenylcarbamate) and Chiralpak AS (amylose tris-(S)-1-phenylethylcarbamate) with different alcoholic modifiers on different amounts in n-heptane. A temperature study was carried out, between 20 and 40 °C and the apparent thermodynamic parameters were calculated thanks to the Van't Hoff linearization. For all compounds (except 3), ΔΔH° and ΔΔS° exhibited positive values ranging from 791.2 to 9999.3 J/mol and from 3.9 to 37.8 J/K/mol respectively, indicating entropically driven separations. Optimized conditions led to goof resolution of 2.37 for compound 1 on Chiralpak AS, with heptane-2-propanol 90:10 (v/v), at a temperature of 30 °C. Then they were transposed to the preparative scale for compound 1, generating 22 mg of each enantiomer with an 80% yield. The limits of detection and of quantification were determined to allow the calculation of the enantiomeric excess. They were found with very low values, equal to 0.32 and 1.05 µ m and 0.33 and 1.11 µ m, respectively, for peaks 1 and 2 of compound 1.

Analysis of non-phthalates plasticizers on porous graphitic carbon by supercritical fluid chromatography using evaporative light scattering detection.

The analysis of several plasticizers, widely used in the production of medical devices, was investigated on porous graphitic carbon (PGC) stationary phase in supercritical fluid chromatography (SFC) with an evaporative light scattering detector (ELSD). Due to strong interaction of compounds with the PGC support, solvents of strong eluotropic strength were added to the CO2 supercritical fluid. The effect of alkyl chain (pentane, hexane, heptane) and chlorinated (CH2Cl2, CHCl3, CCl4) solvents was studied on the retention and on the ELSD detection of plasticizers. A co-solvent mixture composed of CHCl3/heptane, eluted under gradient mode, allowed a significant improvement of the ELSD response compared to the use of each solvent individually. Then, a central composite design (CCD) was implemented to optimize both the separation and the detection of plasticizers. The parameters involved were the outlet pressure, the gradient slope, the co-solvent composition and the drift tube temperature of the ELSD. After optimization, baseline separation of plasticizers was achieved in 7min and best signal-to-noise ratios were obtained with outlet pressure and drift tube temperature of ELSD set at 200bar and 31°C, respectively. The co-solvent mixture was also composed of CHCl3/heptane (35/65 v/v) and a gradient from 15 to 60% of co-solvent in 2.2min was employed. The results demonstrated that CCD is a powerful tool for the optimization of SFC/ELSD method and the response surface model analysis can provide statistical understandings of the significant factors required to achieve optimal separation and ELSD sensitivity.

Enantioseparation of pyroglutamide derivatives on polysaccharide based chiral stationary phases by high-performance liquid chromatography and supercritical fluid chromatography: a comparative study.

Analytical enantioseparation of three pyroglutamide derivatives with pharmacological activity against the purinergic receptor P2X7, was run in both high-performance liquid chromatography and supercritical fluid chromatography. Four polysaccharide based chiral stationary phases, namely amylose and cellulose tris (3,5-dimethylphenylcarbamate), amylose tris ((S)-α-methylbenzylcarbamate) and cellulose tris (4-methylbenzoate) with various mobile phases consisted of either heptane/alcohol (ethanol and 2-propanol) or carbon dioxide/alcohol (methanol or ethanol) mixtures, were investigated. After analytical screenings, the best conditions were transposed, for compound 1, to semi-preparative scale. Each approach was fully validated to meet the International Conference on Harmonisation requirements and compared. Whereas the limits of detection and quantification were near six-fold better in HPLC than in SFC (respectively 0.20 and 0.66 µM versus 1.11 and 3.53 µM for one of the enantiomers), in terms of low solvent consumption (7.2 mL of EtOH versus 3.2 mL of EtOH plus 28.8 mL of toxic and inflammable heptane per injection in SFC and HPLC, respectively), time effective cost (9 min versus 40 min per injection in SFC and HPLC, respectively) and yields (98% versus 71% in SFC and HPLC, respectively), the latter method proved its ecological superiority.

Enhanced detection for determination of enantiomeric purity of novel agomelatine analogs by EKC using single and dual cyclodextrin systems.

Performing CD-EKC, baseline separation of five agomelatine analogs, potential antidepressant compounds, was achieved. A method for the enantioresolution and determination of enantiomeric purity of these naphthalene derivatives was developed using capillaries dynamically coated with polyethylene oxide and anionic cyclodextrins (highly sulfated CD) as chiral selectors. Operational parameters such as the nature and concentration of the cyclodextrins were investigated. In a second step the implementation of a dual cyclodextrin system was found to strongly enhance the LOD of the analytes. After optimization, best conditions were a 25 mM phosphate buffer at pH 2.5 containing 5% w/v (i.e. 19.7 mM) of highly sulfated-γ-CD and 10 mM of 6-monodeoxy-6-monoamino-ß-CD dual system, leading to resolution of, at least, 3.6 in 35 min. A preliminary validation of the developed method was undertaken: linearity, precision, and LOD and LOQ were evaluated. The latest ones were found equal to 0.25 and 0.82 µM and to 0.31 and 0.96 µM respectively for the first and the second enantiomer of compound 1.

Antagonists of the P2X7 receptor: mechanism of enantioselective recognition using highly sulfated and sulfobutylether cyclodextrins by capillary electrokinetic chromatography.

This work concerns the successful enantiomeric separation of pyroglutamic acid derivatives, known to be P2X7 receptor antagonists, achieved by electrokinetic chromatography. After a broad screening, two negatively charged cyclodextrins, sulfobutylether-ß-cyclodextrin (SBE-ß-CD), and highly sulfated-γ-cyclodextrin (HS-γ-CD) were chosen as stereoselective agents to cooperate with the BGE for complexation. A fused silica capillary coated with polyethylene oxide, filled with a phosphate buffer (25 mM, pH 2.5) containing various concentrations of CD, was used. Assuming a 1:1 stoichiometry, calculations of the binding constants, employing the three different linearization plots, were performed from the corrected electrophoretic mobilities values of the enantiomers, at different concentrations of SBE-ß-CD and HS-γ-CD in the BGE. The highest complexation was found with the SBE-ß-CD. Among the three equations, results showed better linearity (R(2) > 0.99) using the y-reciprocal fit. This plotting method was then performed to determine the binding constants of each enantiomer at different temperature for compounds 1 and 2 with SBE-ß-CD and HS-γ-CD in order to access to the thermodynamic parameters of the eight complexes. The linearity of the Van't Hoff plot, in the range of 288-303 K leading to negative enthalpy values, showed that the complexation phenomenon is enthalpically controlled and thermodynamically favored.

A chemometric approach to elucidate the parameter impact in the hyphenation of evaporative light scattering detector to supercritical fluid chromatography.

The aim of this work was to elucidate the effects of parameters influencing the evaporative light scattering detector (ELSD) response when it was coupled to supercritical fluid chromatography (SFC). Phthalates, currently used as plasticizers in medical devices, were selected as model compounds. The configuration of the hyphenation setup was firstly optimized and shown that both peak efficiency and sensitivity were improved by connecting the ELSD to the SFC before the back pressure regulator (BPR). By using a tee-junction which splits the flow after the PDA towards the collect fraction (or waste) and the ELSD, this instrument configuration has the advantage to be applicable for small-scale preparative SFC. The impacts of other parameters such as mobile phase composition and flow rate, outlet pressure, column oven temperature and ELSD drift tube temperature on the ELSD signal were evaluated using a chemometric approach. First, it was demonstrated that a classical mobile phase composed of CO2-methanol 90:10 (v/v) was suitable to obtain great nebulization efficiency. The flow rate of the eluent was the second main effect factor. The setting must be as low as possible to avoid the loss of large particle size in the drift tube resulting in a loss of signal intensity. Concerning the outlet pressure, the configuration of the setup between SFC and ELSD requires a setting as high as possible to limit the partial liquid-vapor separation of the mobile phase in the restrictor tube. Finally, due to the low quantity of solvent which must be evaporated in the detector, a drift tube temperature of 25 °C is suitable for the hyphenation of ELSD to SFC. In the optimized conditions, the proposed SFC/ELSD method could be suitable to quantify plasticizers in medical devices.

Development of HPLC/fluorescence detection method for chiral resolution of dansylated benzimidazoles derivatives.

The development of high performance liquid chromatography method on amylose-based stationary phase (Chiralpak AD) with n-hexane-2-propanol (90:10, v/v) as mobile phase allowed the enantioseparation of non-dansylated and dansylated benzimidazole derivatives, prepared from potent-AMPK activators, to be achieved. Using both fluorescence and ultraviolet detection, limits of detection and quantification were determined. Fluorescence detection seems to be the most appropriate technique since the first enantiomer of dansylated benzimidazole 8 eluted with a limit of quantification of 2.25 nm. The quantification limit was improved 10-fold by fluorescence detection compared with a previous report describing mass spectrometry detection. Linearity and repeatability parameters were validated. These lower limits obtained by fluorescence detection, associated with good resolution observed for the dansylated derivatives, make this chiral methodology convenient for the use of these fluorescent potent-AMPK activators as probes to elucidate their cellular localization and their mechanism of action.

A validated micellar electrokinetic chromatography method for the quantitation of dexamethasone, ondansetron and aprepitant, antiemetic drugs, in organogel.

A micellar electrokinetic chromatography (MEKC) method was developed for the determination of three anti-vomiting drugs (aprepitant, dexamethasone and ondansetron) in pharmaceutical formulations. The method was optimized using a central composite design (CCD). Four main factors (borate buffer concentration, pH, methanol content and sodium dodecyl sulfate concentration) were optimized in order to obtain best resolutions and peak efficiencies in a minimum runtime. The separation was performed in a fused-silica capillary. After optimization, the background electrolyte consisted of a borate buffer (62.5mM, pH 8.75) containing sodium dodecyl sulfate (77.5mM) and methanol (3.75%). Under these conditions, a complete separation of each antiemetic drug and its respective internal standards was achieved in 38min. The method was validated with trueness values from 94.9 to 107.2% and precision results (repeatability and intermediate precision) lower than 5.9%. MEKC-UV was the first method allowing the separation of aprepitant, dexamethasone and ondansetron and was suitable for the quantitation of these three antiemetic drugs in organogel formulations. The rapid sample preparation coupled with an automated separation technique make this method convenient for quality control of extemporaneous magistral ready-to-use formulation.

In vitro pharmacokinetic profile of a benzopyridooxathiazepine derivative using rat microsomes and hepatocytes: identification of phases I and II metabolites.

In the present study, the in vitro metabolic behavior of a benzopyridooxathiazepine (BZN), a potent tubulin polymerization inhibitor, was investigated by liquid chromatography-UV detection (LC-UV). First, simple and fast LC-UV methods have been optimized and validated to evaluate the pharmacokinetic profile of BZN using rat liver microsomes or hepatocytes primary cultures suspensions. Whatever the medium investigated, baseline resolution between the internal standard and BZN was achieved in a run time less than 15min using a Symmetry ODS column (150mm×4.6mm i.d., 5µm) and a mobile phase consisting of acetonitrile/water/formic acid 60:40:0.1 (v/v/v). Linearity was assessed in the 0.1-50µM and in the 0.05-5µM concentration ranges, respectively, in microsomal and hepatocyte matrix. According to the novel strategy based on the build of the accuracy profile, total error of the developed methods was included within the ±10% limits of acceptance. Then, from incubation of BZN with both liver microsomes and or hepatocytes, structural informations on phase I and phase II metabolites were acquired using liquid chromatography coupled to electrospray orbitrap mass spectrometer (LC-MS). Mass spectrum, double bond equivalent and elemental composition were useful data to access to the chemical structure of each metabolite. In microsomal suspension, four main metabolites were observed including monohydroxylation and dihydroxylation of the benzopyridooxathiazepine core, demethylation of the methoxyphenyl moiety, as well as their combinations. The phase II metabolites detected in hepatocytes suspension were the glucuronide adducts of both demethylated BZN and mono-oxygenated BZN. Based on the structural elucidation of the metabolites detected, we proposed an in vitro metabolic pathway of BZN, a new tubulin polymerization inhibitor.

Comparative study of the complex forming ability and enantioselectivity of cyclodextrin polymers by CE and 1H NMR.

The interactions between nine drugs (baclofen, bupivacaine, chlorpheniramine, ketoconazole, paliperidone, promethazine, propranolol, risperidone and verapamil) and six cyclodextrins (α-CD, ß-CD, γ-CD, HP-ß-CD, HP-γ-CD and Me-ß-CD) or six polymers of cyclodextrins (polyα-CD, polyß-CD, polyγ-CD, polyHP-ß-CD, polyHP-γ-CD and polyMe-ß-CD) were studied by affinity capillary electrophoresis and/or (1)H NMR at pH 2.5. An exhaustive qualitative study was performed through the determination of the retardation factor. Then, four compounds and both ß-CD and polyß-CD were selected for the quantitative study of the interactions at pH 2.5 and 7.0. By comparing the results obtained with the ß-CD and polyß-CD, it appears that the apparent binding constants are up to five times higher with the polymer. The 2D-NMR results seem to indicate that the structure of the polymeric network favours the inclusion of the guest in the hydrophobic cavity of the CD units. Moreover, the poly-CDs have shown very high enantioselective abilities at both pH.

Structural elucidation of degradation products of a benzopyridooxathiazepine under stress conditions using electrospray orbitrap mass spectrometry - study of degradation kinetic.

1-(4-Methoxyphenylethyl)-11H-benzo[f]-1,2-dihydro-pyrido[3,2,c][1,2,5]oxathiazepine 5,5 dioxide (BZN) is a cytotoxic derivative with very promising in vitro activity. Regulatory authority for registration of pharmaceuticals for human use requires to evaluate the stability of active compound under various stress conditions. Forced degradation of BZN was investigated under hydrolytic (0.1M NaOH, 0.1M HCl, neutral), oxidative (3.3% H(2)O(2)), photolytic (visible light) and thermal (25 °C, 70 °C) settings. Relevant degradation took place under thermal acidic (0.1M HCl, 70 °C) and oxidative (3.3% H(2)O(2)) conditions. Liquid chromatography-mass spectrometry (LC-MS) analyses revealed the presence of ten degradation products whose structures were characterized by electrospray ionization-orbitrap mass spectrometry. The full scan accurate mass analysis of degradation products was confirmed or refuted using three tools furnished by the MS software: (1) predictive chemical formula and corresponding mass error; (2) double bond equivalent (DBE) calculation; and (3) accurate mass product ion spectra of degradation products. The structural elucidation showed that the tricycle moiety was unstable under thermal acidic and oxidative conditions since four degradation products possess an opened oxathiazepine ring. Then, a simple and fast HPLC-UV method was developed and validated for the determination of the degradation kinetic of BZN under acidic and oxidative conditions. The method was linear in the 5-100 µg mL(-1) concentration range with a good precision (RSD=2.2% and 2.7% for the repeatability and the intermediate precision, respectively) and a bias which never exceeded 1.6%, whatever the quality control level. With regards to the BZN concentration, a first-order degradation process was determined, with t(1/2)=703 h and 1140 h, under oxidative and acidic conditions, respectively.

A multivariate approach for the determination of isoelectric point of human carbonic anhydrase isoforms by capillary isoelectric focusing.

Human carbonic anhydrase (hCA) IX and XII are isoenzymes which are highly overexpressed in many cancer types. Recently, it has been shown that hCA IX contributes to the acidification of the tumor environment leading to chemoresistance with basic antitumoral drugs. The development of selective hCA inhibitors constitutes a new therapeutic axis. In order to elucidate the specific interactions between hCA and inhibitors, physico-chemical properties of hCA must be evaluated. This work reports the determination of the isoelectric point (pI) of a series of hCA isoforms by capillary isoelectric focusing. First, the method was optimized with synthetic UV-detectable pI markers using a central composite design. The separation was performed in a fused-silica capillary chemically derivatized with hydroxypropylcellulose and using a glycerol-water medium as the anticonvective gel. Three main factors (ampholyte content, focusing time and mobilization pressure) were optimized in order to obtain the best resolution, detection threshold and precision on the pI determination. Then, the model was validated through the analysis of standard proteins mixture having known pI values, before investigating the pI of hCA isoforms.

Complexation of triptolide and its succinate derivative with cyclodextrins: affinity capillary electrophoresis, isothermal titration calorimetry and 1H NMR studies.

The complexation of the triptolide PG490 and its succinate derivative PG490-88Na with various cyclodextrins was studied using three complementary techniques: affinity capillary electrophoresis (ACE), isothermal titration calorimetry (ITC) and nuclear magnetic resonance (NMR). The apparent binding constants of the complexes formed between the drugs and 8 CDs (α-CD, ß-CD, γ-CD, HP-α-CD, HP-ß-CD, HP-γ-CD, CM-ß-CD and amino-ß-CD) were determined by ACE through linear Scott's plots. The apparent and averaged binding constants of the complexes formed between PG490-88 and ß-CD, γ-CD, HP-α-CD, HP-ß-CD or HP-γ-CD are contained in the narrow range 135-167 M(-1). For the anionic CM-ß-CD and cationic amino-ß-CD, these constants are 38 and 278 M(-1), respectively, which is in accordance with electrostatic repulsions or attractions with the succinate moiety. ITC and NMR investigations for the binding constants determinations were performed for 2 CDs allowing high complexation: HP-ß-CD and amino-ß-CD. The three techniques provided similar results. ITC and NMR, in contrast to ACE, allowed to study the complexes formed between the neutral compound PG490 and neutral cyclodextrins. A more advanced characterization of the PG 490-88Na/amino-ß-CD complex, which displays the highest apparent binding constant, was undertaken using NMR spectroscopy. The 1:1 stoichiometry of the complex was established by (1)H NMR 1D and selective 1D TOCSY experiments using the continuous variation method. Moreover, the 1D and 2D ROESY experiments revealed the inclusion of the isopropyl moiety of the triptolide derivative in the hydrophobic CD cavity. Altogether, the data provide strong evidences that the two triptolide compounds can be efficiently complexed with CD.