Anodization study of epitaxial graphene: insights on the oxygen evolution reaction of graphitic materials.

The photoemission electron microscopy and x-ray photoemission spectroscopy were utilized for the study of anodized epitaxial graphene (EG) on silicon carbide as a fundamental aspect of the oxygen evolution reaction on graphitic materials. The high-resolution analysis of surface morphology and composition quantified the material transformation during the anodization. We investigated the surface with lateral resolution <150 nm, revealing significant transformations on the EG and the role of multilayer edges in increasing the film capacitance.

Printable Heterostructured Bioelectronic Interfaces with Enhanced Electrode Reaction Kinetics by Intermicroparticle Network.

Printable organic bioelectronics provide a fast and cost-effective approach for the fabrication of novel biodevices, while the general challenge is to achieve optimized reaction kinetics at multiphase boundaries between biomolecules and electrodes. Here, we present an entirely new concept based on a modular approach for the construction of heterostructured bioelectronic interfaces by using tailored functional "biological microparticles" combined with "transducer microparticles" as modular building blocks. This approach offers high versatility for the design and fabrication of bioelectrodes with a variety of forms of interparticle spatial organization, from layered-structures to more advance bulk heterostructured architectures. The heterostructured biocatalytic electrodes delivered twice the reaction rate and a six-fold increase in the effective diffusion kinetics in response to a catalytic model using glucose as the substrate, together with the advantage of shortened diffusion paths for reactants between multiple interparticle junctions and large active particle surface. The consequent benefits of this improved performance combined with the simple means of mass production are of major significance for the emerging printed electronics industry.

Electrocatalytic Currents from Single Enzyme Molecules.

Single molecule enzymology provides an opportunity to examine details of enzyme mechanisms that are not distinguishable in biomolecule ensemble studies. Here we report, for the first time, detection of the current produced in an electrocatalytic reaction by a single redox enzyme molecule when it collides with an ultramicroelectrode. The catalytic process provides amplification of the current from electron-transfer events at the catalyst leading to a measurable current. This new methodology monitors turnover of a single enzyme molecule. The methodology might complement existing single molecule techniques, giving further insights into enzymatic mechanisms and filling the gap between fundamental understanding of biocatalytic processes and their potential for bioenergy production.

Total phenol analysis of weakly supported water using a laccase-based microband biosensor.

The monitoring of phenolic compounds in wastewaters in a simple manner is of great importance for environmental control. Here, a novel screen printed laccase-based microband array for in situ, total phenol estimation in wastewaters and for water quality monitoring without additional sample pre-treatment is presented. Numerical simulations using the finite element method were utilized for the characterization of micro-scale graphite electrodes. Anodization followed by covalent modification was used for the electrode functionalization with laccase. The functionalization efficiency and the electrochemical performance in direct and catechol-mediated oxygen reduction were studied at the microband laccase electrodes and compared with macro-scale electrode structures. The reduction of the dimensions of the enzyme biosensor, when used under optimized conditions, led to a significant improvement in its analytical characteristics. The elaborated microsensor showed fast responses towards catechol additions to tap water - a weakly supported medium - characterized by a linear range from 0.2 to 10 µM, a sensitivity of 1.35 ± 0.4 A M(-1) cm(-2) and a dynamic range up to 43 µM. This enhanced laccase-based microsensor was used for water quality monitoring and its performance for total phenol analysis of wastewater samples from different stages of the cleaning process was compared to a standard method.

Pure Nanoscale Morphology Effect Enhancing the Energy Storage Characteristics of Processable Hierarchical Polypyrrole.

We report a new synthesis approach for the precise control of wall morphologies of colloidal polypyrrole microparticles (PPyMPs) based on a time-dependent template-assisted polymerization technique. The resulting PPyMPs are water processable, allowing the simple and direct fabrication of multilevel hierarchical PPyMPs films for energy storage via a self-assembly process, whereas convention methods creating hierarchical conducting films based on electrochemical polymerization are complicated and tedious. This approach allows the rational design and fabrication of PPyMPs with well-defined size and tunable wall morphology, while the chemical composition, zeta potential, and microdiameter of the PPyMPs are well characterized. By precisely controlling the wall morphology of the PPyMPs, we observed a pure nanoscale morphological effect of the materials on the energy storage performance. We demonstrated by controlling purely the wall morphology of PPyMPs to around 100 nm (i.e., thin-walled PPyMPs) that the thin-walled PPyMPs exhibit typical supercapacitor characteristics with a significant enhancement of charge storage performance of up to 290% compared to that of thick-walled PPyMPs confirmed by cyclic voltametry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. We envision that the present design concept could be extended to different conducting polymers as well as other functional organic and inorganic dopants, which provides an innovative model for future study and understanding of the complex physicochemical phenomena of energy-related materials.

Cholesterol self-powered biosensor.

Monitoring the cholesterol level is of great importance, especially for people with high risk of developing heart disease. Here we report on reagentless cholesterol detection in human plasma with a novel single-enzyme, membrane-free, self-powered biosensor, in which both cathodic and anodic bioelectrocatalytic reactions are powered by the same substrate. Cholesterol oxidase was immobilized in a sol-gel matrix on both the cathode and the anode. Hydrogen peroxide, a product of the enzymatic conversion of cholesterol, was electrocatalytically reduced, by the use of Prussian blue, at the cathode. In parallel, cholesterol oxidation catalyzed by mediated cholesterol oxidase occurred at the anode. The analytical performance was assessed for both electrode systems separately. The combination of the two electrodes, formed on high surface-area carbon cloth electrodes, resulted in a self-powered biosensor with enhanced sensitivity (26.0 mA M(-1) cm(-2)), compared to either of the two individual electrodes, and a dynamic range up to 4.1 mM cholesterol. Reagentless cholesterol detection with both electrochemical systems and with the self-powered biosensor was performed and the results were compared with the standard method of colorimetric cholesterol quantification.

Unsubstituted phenothiazine as a superior water-insoluble mediator for oxidases.

The mediation of oxidases glucose oxidase (GOx), lactate oxidase (LOx) and cholesterol oxidase (ChOx) by a new electron shuttling mediator, unsubstituted phenothiazine (PTZ), was studied. Cyclic voltammetry and rotating-disk electrode measurements in nonaqueous media were used to determine the diffusion characteristics of the mediator and the kinetics of its reaction with GOx, giving a second-order rate constant of 7.6 × 10(3)-2.1 × 10(4)M(-1)s(-1) for water-acetonitrile solutions containing 5-15% water. These values are in the range reported for commonly used azine-type mediators, indicating that PTZ is able to function as an efficient mediator. PTZ and GOx, LOx and ChOx were successfully co-immobilised in sol-gel membrane on a screen-printed electrode to construct glucose, lactate and cholesterol biosensors, respectively, which were then optimised in terms of stability and sensitivity. The electrocatalytic oxidation responses showed a dependence on substrate concentration ranging from 0.6 to 32 mM for glucose, from 19 to 565 mM for lactate and from 0.015 to 1.0mM for cholesterol detection. Oxidation of substrates on the surface of electrodes modified with PTZ and enzyme membrane was investigated with double-step chronoamperometry and the results showed that the PTZ displays excellent electrochemical catalytic activities even when immobilised on the surface of the electrode.

Sol-gel immobilization of lactate oxidase from organic solvent: toward the advanced lactate biosensor.

We report on the novel protocol for enzyme immobilization into gel of siloxanes using water-organic mixtures with the high content of organic solvent as a reaction medium. Hydrolysis of alkoxysilanes carried out without excessive dilution with water resulted in more active and stable enzyme containing membranes. Immobilization of an inherently labile lactate oxidase according to the proposed sol-gel protocol over Prussian Blue modified electrode resulted in an advanced lactate biosensor characterized with a sensitivity of 0.18 A M(-1) cm(-2) in the flow injection analysis (FIA) mode over a wide dynamic range. A comparison with the known sensors has shown that analytical performances of the elaborated lactate biosensor are advantageous over both published systems and commercialized devices. The biosensor shows an appropriate stability and is suitable for clinical analysis (including noninvasive diagnostics) and food quality control.

Label-free detection of DNA hybridization at a liquid|liquid interface.

A novel electrochemical approach for label-free detection of DNA primary sequence has been proposed. The flow of nonelectroactive ions across a liquid|liquid interface was used as an electrochemical probe for detection of DNA hybridization. Disposable graphite screen-printed electrodes shielded with a thin layer of inert polymer plasticized with water-immiscible polar organic solvent were modified by probe oligonucleotide and used as a DNA sensor. The specific DNA coupling has been detected with impedance spectroscopy by decrease of ion-transfer resistance. The detection limit was of 10-8 M of target oligonucleotide. The reported sensor was suitable for discrimination of a single mismatch oligonucleotide from the full complementary one. The reported DNA sensor was advantageous over known physicochemical approaches, providing the most significant changes in the measured parameters.

Electrochemical transducers based on surfactant bilayers for the direct detection of affinity interactions.

The simple methods for the preparing of direct affinity sensors are proposed. The proposed method consists of the immobilizations of either oligonucleotide or antibodies as recognizing elements onto the surfactant bilayer. For DNA-sensor we propose to immobilize oligonucleotide by spontaneous infiltration of hydrocarbon chain bound to oligonucleotide pentadecathymidylate (dT(15)) into the hydrophobic region of surfactant bilayer. The adsorption of antibodies on bilayer surface has resulted in immunosensor development. The direct detection of affinity interactions in both cases has been investigated by impedance spectroscopy. At both studies the significant changes in impedance spectra have observed. The dynamics of response manifestation have been followed the specific DNA-coupling causing the decrease of real part of impedance, whereas the antibody-antigen interaction caused the increase of real part. The obtained results are promising for the development of impedimetric affinity sensors for clinical or environmental applications.

Surfactant bilayers for the direct electrochemical detection of affinity interactions.

Simple methods of preparing the direct affinity sensors are proposed. Due to the self-consistent introduction of a hydrocarbon chain bound with oligonucleotide pentadecathymidylate (dT(15)) into the hydrophobic region of surfactant bilayer or the adsorption of antibodies on the bilayer surface, the immobilizations of oligonucleotide or antibodies were carried out correspondingly. The responses were detected by impedance spectroscopy. Whereas the specific DNA-coupling caused the decrease of real part of impedance, the antibody-antigen interaction caused the increase of real part. The obtained results give an opportunity for the development of impedimetric affinity sensors for clinical analysis or for the detection of various environmental pollutants.