Water Safety Plan, Monochloramine Disinfection and Extensive Environmental Sampling Effectively Control Legionella and Other Waterborne Pathogens in Nosocomial Settings: The Ten-Year Experience of an Italian Hospital.

Legionella contamination control is crucial in healthcare settings where patients suffer an increased risk of disease and fatal outcome. To ensure an effective management of this health hazard, the accurate application of a hospital-specific Water Safety Plan (WSP), the choice of a suitable water disinfection system and an extensive monitoring program are required. Here, the ten-year experience of an Italian hospital is reported: since its commissioning, Legionellosis risk management has been entrusted to a multi-disciplinary Working Group, applying the principles of the World Health Organization's WSP. The disinfection strategy to prevent Legionella and other waterborne pathogens relies on the treatment of domestic hot water with a system ensuring the in situ production and dosage of monochloramine. An average of 250 samples/year were collected and analyzed to allow an accurate assessment of the microbiological status of water network. With the aim of increasing the monitoring sensitivity, in addition to the standard culture method, an optimized MALDI-ToF MS-based strategy was applied, allowing the identification of Legionella species and other relevant opportunistic pathogens. Data collected so far confirmed the effectiveness of this multidisciplinary approach: the fraction of positive samples never overcame 1% on a yearly basis and Legionnaires' Disease cases never occurred.

Hypervariable-Locus Melting Typing: a Novel Approach for More Effective High-Resolution Melting-Based Typing, Suitable for Large Microbiological Surveillance Programs.

Pathogen typing is pivotal to detecting the emergence of high-risk clones in hospital settings and to limit their spread. Unfortunately, the most commonly used typing methods (i.e., pulsed-field gel electrophoresis [PFGE], multilocus sequence typing [MLST], and whole-genome sequencing [WGS]) are expensive or time-consuming, limiting their application to real-time surveillance. High-resolution melting (HRM) can be applied to perform cost-effective and fast pathogen typing, but developing highly discriminatory protocols is challenging. Here, we present hypervariable-locus melting typing (HLMT), a novel approach to HRM-based typing that enables the development of more effective and portable typing protocols. HLMT types the strains by assigning them to melting types (MTs) on the basis of a reference data set (HLMT-assignment) and/or by clustering them using melting temperatures (HLMT-clustering). We applied the HLMT protocol developed on the capsular gene wzi for Klebsiella pneumoniae on 134 strains collected during surveillance programs in four hospitals. Then, we compared the HLMT results to those obtained using wzi, MLST, WGS, and PFGE typing. HLMT distinguished most of the K. pneumoniae high-risk clones with a sensitivity comparable to that of PFGE and MLST+wzi. It also drew surveillance epidemiological curves comparable to those obtained using MLST+wzi, PFGE, and WGS typing. Furthermore, the results obtained using HLMT-assignment were consistent with those of wzi typing for 95% of the typed strains, with a Jaccard index value of 0.9. HLMT is a fast and scalable approach for pathogen typing, suitable for real-time hospital microbiological surveillance. HLMT is also inexpensive, and thus, it is applicable for infection control programs in low- and middle-income countries. IMPORTANCE In this work, we describe hypervariable-locus melting typing (HLMT), a novel fast approach to pathogen typing using the high-resolution melting (HRM) assay. The method includes a novel approach for gene target selection, primer design, and HRM data analysis. We successfully applied this method to distinguish the high-risk clones of Klebsiella pneumoniae, one of the most important nosocomial pathogens worldwide. We also compared HLMT to typing using WGS, the capsular gene wzi, MLST, and PFGE. Our results show that HLMT is a typing method suitable for real-time epidemiological investigation. The application of HLMT to hospital microbiology surveillance can help to rapidly detect outbreak emergence, improving the effectiveness of infection control strategies.

Biological outcomes and patient-reported outcome measures (PROMs) of minimally invasive full-mouth rehabilitations of patients with erosions and/or abrasions by means of the "3-step technique": part 2 of the 6-year outcomes of a retrospective clinical study.

PURPOSE: To evaluate biologic and esthetic outcomes, as well as the patient-reported outcome measures (PROMs), of full-mouth rehabilitations in patients suffering from generalized erosive and/or abrasive tooth wear following the 3-step technique. MATERIALS AND METHODS: Patients who received a minimally invasive full-mouth rehabilitation according to the 3-step technique and who were treated at the University of Geneva and/or in a private practice were considered for inclusion. The minimum service time of the restorations was 12 months. The biologic outcomes were analyzed by assessing pocket probing depth (PPD), Plaque Index (PI), and bleeding on probing (BOP). Furthermore, secondary caries, tooth vitality, and sensitivity to temperature were evaluated using the modified United States Public Health Service (USPHS) criteria. The esthetic outcomes were rated with the White Esthetic Score (WES). Finally, PROMs were evaluated using visual analog scales (VAS). RESULTS: A total of 19 patients with 406 restorations (149 direct composite resins, 110 indirect composite resin/ceramic onlays, and 147 composite resin/ceramic veneers) were examined after a mean follow-up of 71.8 ± 28.6 months. Periodontal parameters were good (mPPD = 2.9 ± 0.4; mPI = 0.1 ± 0.2; and mBOP = 0.05 ± 0.1). No secondary caries were found, and no abutment tooth had lost vitality. A total of 36 abutment teeth had moderate sensitivity, but none presented pronounced sensitivity. The rehabilitations exhibited good esthetic outcomes (mWES = 8.4 ± 1.9). Patients reported satisfying esthetic results of their rehabilitations (mean VAS = 9.2 ± 1.6) and considered their treatment as comfortable (mean VAS = 8.2 ± 2.1), while the least favorably rated parameter was the cost of treatment (mean VAS = 4.1 ± 3.2). CONCLUSION: Minimally invasive full-mouth rehabilitations of patients with generalized tooth wear by means of the 3-step technique exhibit very good clinical medium-term results with respect to biologic and objective/subjective esthetic outcomes. The patient satisfaction with this treatment was high.

Retrospective clinical study of minimally invasive full-mouth rehabilitations of patients with erosions and/or abrasions following the "3-step technique". Part 1: 6-year survival rates and technical outcomes of the restorations.

PURPOSE: To evaluate the survival rates and technical outcomes of minimally invasive full-mouth rehabilitations in patients affected by dental erosion and attrition. MATERIALS AND METHODS: For this retrospective study, 28 subjects (8 women, 20 men; mean age: 45.6 years) who suffered from generalized erosions and attrition and who were treated according to the 3-step technique were invited to participate. The patient records were reviewed, and the restorations were clinically and radiographically examined. This part of the study (part 1) evaluated restoration survival and technical outcomes using the modified United States Public Health Service criteria (mUSPHS). Survival analysis was performed using Kaplan-Meier survival statistics, and comparison between subgroups was made using log-rank test. For all other comparisons, cross-tabulations of occurrence were performed, and significance was tested using Pearson chi-square test. The level of statistical significance was set at P < .05. RESULTS: A total of 19 patients (3 women, 16 men; mean age: 45.6 years) agreed to participate. In these patients, 406 restorations (149 direct composites, 110 onlays, 147 veneers) supported by 365 teeth were examined. The mean time in service was 71.8 ± 28.6 months. Six failed restorations were identified; all were direct composites. The 6-year survival rates were 97.3% for direct composites, 98.2% for onlays, and 100% for veneers (P > .05). No differences were found among materials and locations of the restorations. Nineteen technical complications included 14 partial fractures, 3 fissures, 1 wear, and 1 decementation. The mUSPHS evaluation showed good technical outcomes. Presence or absence of a nightguard influenced restoration survival (P = .003). CONCLUSION: Minimally invasive rehabilitations of patients with erosions/attrition with the 3-step technique are a reliable treatment option in the medium term. Protective nightguards are recommended.

Blood stream infections during the first wave of COVID-19. A short microbiological retrospective picture at Papa Giovanni XXIII Hospital, Bergamo, Italy.

This paper aims to describe the etiology of bloodstream infections in COVID-19, Papa Giovanni XXIII Hospital, Bergamo, Italy. Two periods were evaluated: February 22-May 21, 2019/2020. We considered: the number of patients and blood culture sets, species of isolates (bacteria, specifically those indicated by EARS criteria; CoNS; Candida albicans) and their antibiotic sensitivity. In 2020 Escherichia coli and Carbapenemase-producing Klebsiella pneumoniae disappeared. Candida albicans and MDR Pseudomonas aeruginosa, Enterococcus faecium and Acinetobacter baumannii were largely present. The analysis shows: 1. BSIs number was the same; 2. In the first month of the COVID-19 period, BSIs were uncommon; 3. Microbial etiologies were different; 4. MDR isolates were less common.

Rapid identification of non-tuberculous mycobacteria with MALDI-TOF mass spectrometry.

Rapid and accurate identification of non-tuberculous mycobacteria (NTM) is important for a prompt start to antibiotic therapy. The aim of this study was to obtain accurate identification of NTM quickly by analyzing the performance of the MALDI-TOF mass spectrometry (MS) system VITEK® MS in identifying various NTM species from solid medium and MGIT 960 liquid medium. The study was performed in two phases: preliminary and perspective. Overall, 41/42 species and 33/34 species were correctly identified from the MGIT medium in the preliminary and perspective phases, respectively. The VITEK® MS system includes in its database part of the mycobacteria from the Mycobacterium fortuitum complex but is unable to discriminate among the various species belonging to the complex. Although the VITEK® MS system does not have the protein spectrum of Mycobacterium chimaera, it is not able to distinguish between Mycobacterium chimaera and Mycobacterium intracellulare. Since the VITEK® MS includes the separate protein spectrum of both M. chelonae and M. abscessus, it can discriminate between the two microorganisms. Thanks to these studies we show that the VITEK® MS system is a reliable method for identification of NTMs directly from MGIT liquid medium, instead of the use of solid media.

EasyPrimer: user-friendly tool for pan-PCR/HRM primers design. Development of an HRM protocol on wzi gene for fast Klebsiella pneumoniae typing.

In this work we present EasyPrimer, a user-friendly online tool developed to assist pan-PCR and High Resolution Melting (HRM) primer design. The tool finds the most suitable regions for primer design in a gene alignment and returns a clear graphical representation of their positions on the consensus sequence. EasyPrimer is particularly useful in difficult contexts, e.g. on gene alignments of hundreds of sequences and/or on highly variable genes. HRM analysis is an emerging method for fast and cost saving bacterial typing and an HRM scheme of six primer pairs on five Multi-Locus Sequence Type (MLST) genes is already available for Klebsiella pneumoniae. We validated the tool designing a scheme of two HRM primer pairs on the hypervariable gene wzi of Klebsiella pneumoniae and compared the two schemes. The wzi scheme resulted to have a discriminatory power comparable to the HRM MLST scheme, using only one third of primer pairs. Then we successfully used the wzi HRM primer scheme to reconstruct a Klebsiella pneumoniae nosocomial outbreak in few hours. The use of hypervariable genes reduces the number of HRM primer pairs required for bacterial typing allowing to perform cost saving, large-scale surveillance programs.

Utility of routine evaluation of sterility of cellular therapy products with or without extensive manipulation: Best practices and clinical significance.

BACKGROUND: We analyzed the results of routine sterility testing performed in our center over the last 10 years, in the context both hematopoietic stem cell transplantation (HSCT) and Advanced Therapeutic Medicinal Products (ATMPs). METHODS: For sterility tests 14-day cultures were performed in culture media detecting aerobic and anaerobic microorganisms. RESULTS: In this study, 22/1643 (1.3%) of apheretic products for autologous or allogeneic HSCT were contaminated, whereas 14/73 bone marrow (BM) harvests (17.8%) were positive. In 22 cases, the contaminated HSCs were infused to patients, but there was no evidence of any adverse impact of contamination on the hematologic engraftment or on infections. Indeed none of the five positive hemocultures detected in patients following infusion could be linked to the contaminated stem cell product. Our Cell Factory also generated 286 ATMPs in good manufacturing practice (GMP) conditions since 2007 and all final products were sterile. In three cases of mesenchymal stromal cell expansions, the starting BM harvests were contaminated, but the cell products at the end of expansion were sterile, presumably thanks to the presence of an antibiotic in the culture medium. DISCUSSION: The decreased rate of contamination of cell harvests observed with time suggests that routine sterility testing and communication of the results to the collecting centers may improve clinical practices. Furthermore, we recommend the use of antibiotics in the medium for ATMP expansion, to decrease the likelihood of expanding microorganisms within clean rooms. Finally we discuss the costs of sterility testing of ATMPs by GMP-approved external laboratories.

Four-unit fixed dental prostheses replacing the maxillary incisors supported by two narrow-diameter implants - a five-year case series.

OBJECTIVES: (1) To determine the survival rate of 10 four-unit fixed dental prostheses (FDPs) replacing the four maxillary incisors, supported by 20 narrow-diameter implants (NDIs), (2) to assess the incidence of mechanical and biological complications, and (3) to evaluate bone level changes longitudinally after final FDP insertion. MATERIALS AND METHODS: Ten patients (six women, four men), mean age 49.4 ± 12.6 years, were treated with a four-unit anterior maxillary FDP (six screw-retained; four cemented). Biological parameters, eventual technical complications, radiographic measurements, and study casts were assessed at 1 (baseline), 3, and 5 years after implant placement. A multilevel logistic regression test was performed on clinical parameters and bone level changes (significance level P < 0.05). RESULTS: The 5-year implant and FDP survival rate was 100%. Mean modified plaque index (mPI) values were 0.03 and 0.02 at 3 and 5 years, significantly lower when compared to mPI (0.11 ± 0.31) at 1 year. Mean modified sulcus bleeding index (mSBI) was 0.08, 0.08, and 0.15 over time. Probing depth (PD) values were 1.57, 1.64, and 2.03 mm. Statistically significant differences were found between 1 vs. 5 year (P = 0.0003) and 3 vs. 5 year (P = 0.001). Keratinized mucosa (3.65 mm) remained stable during observation period. DIB mean values were 2.01 ± 0.34, 2.13 ± 0.13, and 2.17 ± 0.38 mm. Patient satisfaction based on visual analog scale revealed favorable fulfillment of overall treatment and esthetic expectations. CONCLUSIONS: Two NDIs supporting a four-unit FDP to replace the four missing maxillary incisors may be considered a predictable treatment modality.

Treatment planning of adhesive additive rehabilitations: the progressive wax-up of the three-step technique.

A full-mouth rehabilitation should be correctly planned from the start by using a diagnostic wax-up to reduce the potential for remakes, increased chair time, and laboratory costs. However, determining the clinical validity of an extensive wax-up can be complicated for clinicians who lack the experience of full-mouth rehabilitations. The three-step technique is a simplified approach that has been developed to facilitate the clinician's task. By following this technique, the diagnostic wax-up is progressively developed to the final outcome through the interaction between patient, clinician, and laboratory technician. This article provides guidelines aimed at helping clinicians and laboratory technicians to become more proactive in the treatment planning of full-mouth rehabilitations, by starting from the three major parameters of incisal edge position, occlusal plane position, and the vertical dimension of occlusion.

CAD/CAM monolithic restorations and full-mouth adhesive rehabilitation to restore a patient with a past history of bulimia: the modified three-step technique.

Due to an increasing awareness about dental erosion, many clinicians would like to propose treatments even at the initial stages of the disease. However, when the loss of tooth structure is visible only to the professional eye, and it has not affected the esthetics of the smile, affected patients do not usually accept a full-mouth rehabilitation. Reducing the cost of the therapy, simplifying the clinical steps, and proposing noninvasive adhesive techniques may promote patient acceptance. In this article, the treatment of an ex-bulimic patient is illustrated. A modified approach of the three-step technique was followed. The patient completed the therapy in five short visits, including the initial one. No tooth preparation was required, no anesthesia was delivered, and the overall (clinical and laboratory) costs were kept low. At the end of the treatment, the patient was very satisfied from a biologic and functional point of view.

Asaia lannensis bacteremia in a 'needle freak' patient.

The genus Asaia has gained much interest lately owing to constant new species discoveries and its role as a potential opportunistic pathogen to humans. Here we describe a transient bacteremia due to Asaia lannensis in a patient with a psychiatric disorder (compulsive self-injection of different substances). Common phenotypic methods of identification failed to identify this organism, and only restriction fragment lenght polymorphism of PCR-amplified 16S rRNA gene allowed for proper identification. The isolate was highly resistant to most antibiotics. The paper also discusses the currently available medical literature, acknowledges the potential problems linked to the isolation of these strains and proposes an approach to species identification that can be applied in a clinical microbiology laboratory.

Malpositioned implants in the anterior maxilla: a novel restorative approach to reestablish peri-implant tissue health and acceptable esthetics. Part I. Case presentation and treatment options.

This two-part case presentation describes the prosthetic challenge of managing complications after inadequate esthetic risk assessment, treatment planning, and implant positioning in the anterior maxilla. Here, the case report of a 50-year-old woman, referred after inappropriate execution of immediate implant placement, is presented. Different restorative treatment alternatives are proposed, excluding major surgical procedures. In the next part of the article, the advantages and shortcomings of the various prosthetic options will be discussed and the selected treatment revealed. The aim of this part of the article is to illustrate the importance of treatment planning, emphasizing that the correction of esthetic implant failures consistently leads to compromised results when compared to what could have been achieved first time round.

Direct identification of microorganisms from positive blood cultures using the lysis-filtration technique and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS): a multicentre study.

Microbial identification from blood cultures is essential to institute optimal antibiotic therapy and improve survival possibilities. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has been successfully applied to identify bacteria and yeasts from positive blood cultures broths. The aim of this multicentre study was to evaluate the reliability of the lysis-filtration technique associated with MALDI-TOF MS to directly identify microorganisms from 765 positive blood cultures collected in six Italian hospitals. Overall, 675/765 (78.1%) blood isolates were correctly identified at the species level, with significant differences between Gram-negative and Gram-positive bacteria (92.6%, and 69.8%, respectively). Some difficulties arise in identifying Streptococcus pneumoniae, Staphylococcus aureus, yeasts and anaerobes. The lysis-filtration protocol is a suitable procedure in terms of performance in identifying microorganisms, but it is quite expensive and technically time-consuming since the time of filtration is not regular for all the samples. The application of the MALDI-TOF MS technique to the direct microbial identification from positive blood cultures is a very promising approach, even if more experience must be gained to minimize errors and costs.

Viridans Group Streptococci clinical isolates: MALDI-TOF mass spectrometry versus gene sequence-based identification.

Viridans Group Streptococci (VGS) species-level identification is fundamental for patients management. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has been used for VGS identification but discrimination within the Mitis group resulted difficult. In this study, VGS identifications with two MALDI-TOF instruments, the Biotyper (Bruker) and the VITEK MS (bioMérieux) have been compared to those derived from tuf, soda and rpoB genes sequencing. VGS isolates were clustered and a dendrogram constructed using the Biotyper 3.0 software (Bruker). RpoB gene sequencing resulted the most sensitive and specific molecular method for S. pneumonia identification and was used as reference method. The sensitivity and the specificity of the VITEK MS in S. pneumonia identification were 100%, while the Biotyper resulted less specific (92.4%). In non pneumococcal VGS strains, the group-level correlation between rpoB and the Biotyper was 100%, while the species-level correlation was 61% after database upgrading (than 37% before upgrading). The group-level correlation between rpoB and the VITEK MS was 100%, while the species-level correlation was 36% and increases at 69% if isolates identified as S. mitis/S. oralis are included. The less accurate performance of the VITEK MS in VGS identification within the Mitis group was due to the inability to discriminate between S. mitis and S. oralis. Conversely, the Biotyper, after the release of the upgraded database, was able to discriminate between the two species. In the dendrogram, VGS strains from the same group were grouped into the same cluster and had a good correspondence with the gene-based clustering reported by other authors, thus confirming the validity of the upgraded version of the database. Data from this study demonstrated that MALDI-TOF technique can represent a rapid and cost saving method for VGS identification even within the Mitis group but improvements of spectra database are still recommended.

Full-mouth adhesive rehabilitation in a case of amelogenesis imperfecta: a 5-year follow-up case report.

Amelogenesis imperfecta (AI) is a hereditary disorder caused by mutations of genes primarily involved in the enamel formation. Several different types of AI have been identified, based on the phenotype and on the mode of inheritance. Regardless of the type, the dental treatment tends to be the same, favoring the complete removal of the compromised enamel late in the patient's life. With the new dentistry guidelines that orient clinicians towards minimal invasiveness, it should be mandatory to intercept patients affected by AI earlier, not only to protect the dentition from further degradation but also to help patients improve their self-esteem. This article examines the restorative dentistry performed on a 24-year-old Caucasian female suffering from the hypoplastic type of AI, using only adhesive procedures. Due to the complex needs of the patient, an interdisciplinary approach was followed, involving orthodontics, periodontics, and restorative dentistry. A full-mouth adhesive rehabilitation was achieved by means of direct composite restorations, veneer/onlays and facial/palatal veneers. No elective endodontic therapy was necessary for restorative purposes. The esthetics, mechanics, and biological success were achieved and maintained. The bond to the enamel did not show signs of degradation (eg, discoloration or infiltration) even after 5 years of function. This is encouraging as it shows that adhesive techniques may be a reliable approach even in the presence of a compromised enamel layer.

Malpositioned implants in the anterior maxilla: a novel restorative approach to reestablish peri-implant tissue health and acceptable esthetics. Part II: Case report and discussion.

This two-part case presentation describes the prosthetic challenge of managing complications in a 50-year-old female patient after inadequate esthetic risk assessment, treatment planning, and implant placement in the anterior maxilla. In Part I, the clinical situation was described, and different restorative solutions were proposed to correct the extreme facial inclination of the implants, excluding major surgical procedures, namely implant removal. In Part II, different prosthetic options are discussed, and the final treatment is revealed. A noninvasive treatment protocol was applied to transform a severely compromised postsurgical situation into an esthetically acceptable result. An unconventional prosthesis design was implemented, including the use of ceramic veneers bonded to the CAD/CAM-generated screw-retained zirconia- based fixed dental prosthesis (FDP), to correct major axis-related problems and spatial discrepancies.

Full-mouth adhesive rehabilitation in case of severe dental erosion, a minimally invasive approach following the 3-step technique.

A full-mouth adhesive rehabilitation in case of severe dental erosion may present a challenge for both the clinician and the laboratory technician, not only for the multiple teeth to be restored, but also for their time schedule, difficult to be included in a busy agenda of a private practice. Thanks to the simplicity of the 3-step technique, full-mouth rehabilitations become easier to handle. In this article the treatment of a very compromised case of dental erosion (ACE class V) is illustrated, implementing only adhesive techniques. The very pleasing clinical outcome was the result of the esthetic, mechanic and most of all biological success achieved, confirming that minimally invasive dentistry should always be the driving motor of any rehabilitation, especially in patients who have already suffered from conspicuous tooth destruction.

Prevalence of urinary colonization by extended spectrum-beta-lactamase Enterobacteriaceae among catheterised inpatients in Italian long term care facilities.

BACKGROUND: Long Term Care Facilities (LTCFs) play a key role in guaranteeing care to patients in developed countries. Many patients, mostly elderly, access LTCFs at some time in their lives, and their healthcare pathways often require them to move back and forth between hospital and outpatient settings. These patterns bring about new challenges regarding infection control, especially healthcare associated infections. METHODS: A point prevalence study was conducted in 23 Italian LTCFs, to identify colonization in patients with urinary catheter (>24 hours). Species identification, susceptibility tests and extended spectrum beta lactamase (ESBL) production screenings were performed using Vitek 2 System. Enterobacteria identified by Vitek 2 System as ESBL-producers or suspected AmpC hyperproducers on the basis of cephamycin resistance, were sent to a research laboratory where they underwent a double-disk synergy test. Finally, ESBL-producers were screened for bla resistance genes by PCR assay. RESULTS: 211 patients with catheter were screened, 185 out of 211 patients showed positive samples for the presence of Enterobacteriaceae, 114 of these 185 patients were colonized by extended spectrum cephalosporins resistant microorganisms. We identified a total of 257 Gram negative pathogens, of which 51.8% (133/257) were extended spectrum cephalosporins resistant. 7 out of 133 cephamycin not susceptible strains proved to be AmpC-type beta-lactamases and 125/133 ESBL-producers; 1 was not further characterized. 43 out of 257 (16.7%) E. coli, 37/257 (14.4%) P. mirabilis, 20/257 (7.8%), P. stuartii, 14/257 (5.4%) M. morganii, 7/257 (2.7%), K. pneumoniae, 4/257 (1.6%) C. koseri proved to be overall ESBL-producers by double-disk synergy test. Third and fourth generation cephalosporin resistant P. mirabilis, P. stuartii and M. morganii strains mainly harboured a blaTEM gene (95.9%), while 89.1% of E. coli were positive for the blaCTX-M determinant by PCR and sequencing. Patients with decubitus had a higher risk of colonization by at least one resistant isolate (p < 0.01). Samples of patients undergoing antibiotic therapy and patients with decubitus showed a higher risk (p < 0.05) of colonization by beta-lactam resistant microorganisms. CONCLUSIONS: These data confirm the presence of high percentages of ESBL-positive Enterobacteria in Italian LTCFs and the predominance of CTX-M type ESBL in E. coli. The alarming presence of ESBL-producing Enterobacteriaceae in Italian LTCFs can seriously compromise the effectiveness of antibiotic therapy.acilities (LTCFs), Antimicrobial resistance.

Adhesively restored anterior maxillary dentitions affected by severe erosion: up to 6-year results of a prospective clinical study.

UNLABELLED: In case of severe dental erosion, the maxillary anterior teeth are often particularly affected. Restoring such teeth conventionally (ie, crowns) would frequently involve elective endodontic therapy and major additional loss of tooth structure. A novel, minimally invasive approach to restore eroded teeth has been developed and is currently being tested in the form of a prospective clinical trial, termed The Geneva Erosion Study. To avoid crowns, two separate veneers with different paths of insertion have been used to restore the affected anterior maxillary teeth, regardless of clinical crown length and amount of remaining enamel. This treatment is called The Sandwich Approach. OBJECTIVES: The purpose of this case series study was to analyze the mid-term clinical outcome of maxillary anterior teeth affected by severe dental erosion that were restored following the Sandwich Approach. MATERIALS AND METHODS: Twelve consecutively consulting patients (mean age: 39.4 years) suffering from advanced dental erosion have been enrolled in the study and were subsequently treated. Due to the late interception of the disease, all patients needed a full-mouth rehabilitation, which was performed without any conventional crowns. At the level of the maxillary anterior teeth, a total of 70 palatal indirect composite restorations and 64 facial feldspathic ceramic veneers were delivered. Both types of veneers were adhesively luted with a hybrid composite. Clinical reevaluations were performed 6 months after insertion of the veneers, and then annually, using modified United States Public Health Service (USPHS) criteria. Marginal adaptation, marginal integrity (seal, absence of infiltration), status of pulp vitality, postoperative sensitivity, esthetics, and restoration success/failure, were the principal clinical parameters analyzed. RESULTS: After an up to 6-year observation time (mean observation time 50.3 months for the palatal veneers and 49.6 months for the facial veneers), no complete or major failure of the restorations was encountered. On the basis of the criteria used, most of the veneers rated Alpha for marginal adaptation and marginal seal. Secondary caries or endodontic complications were not detected. Using visual analogue scale analysis, the patient-centered satisfaction revealed a high esthetic and functional acceptance of 94.6%. CONCLUSIONS: Compared to conventional crown preparation, restoring compromised maxillary anterior teeth by means of 2 veneers prevents excessive tooth structure removal and loss of tooth vitality. Questions on the longevity of this new treatment arise, due to the nonfavorable initial status of the teeth to be restored (eg, lack of enamel, sclerotic dentin substrate and short clinical crowns). The clinical performance of the teeth treated following the Sandwich Approach seems promising, since none of the treated teeth lost their vitality, no failure of any of the restorations was detected, and the patients' overall satisfaction was high. Even though further investigation is needed to determine the clinical long-term performance of the described treatment modality, the encouraging mid-term results (biological, esthetic, and mechanical success) clearly question if conventional crowns in the anterior maxillary segments can still continue to be considered the best and only option to treat this particular population of patients.