Antimicrobial effects of silver nanoparticle-microspots on the mechanical properties of single bacteria.

Silver nanoparticles (AgNPs) conjugated with polymers are well-known for their powerful and effective antimicrobial properties. In particular, the incorporation of AgNPs in biocompatible catecholamine-based polymers, such as polydopamine (PDA), has recently shown promising antimicrobial activity, due to the synergistic effects of the AgNPs, silver(I) ions released and PDA. In this study, we generated AgNPs-PDA-patterned surfaces by localised electrochemical depositions, using a double potentiostatic method via scanning electrochemical cell microscopy (SECCM). This technique enabled the assessment of a wide parameter space in a high-throughput manner. The optimised electrodeposition process resulted in stable and homogeneously distributed AgNP-microspots, and their antimicrobial activity against Escherichia coli was assessed using atomic force microscopy (AFM)-based force spectroscopy, in terms of bacterial adhesion and cell elasticity. We observed that the bacterial outer membrane underwent significant structural changes, when in close proximity to the AgNPs, namely increased hydrophilicity and stiffness loss. The spatially varied antimicrobial effect found experimentally was rationalised by numerical simulations of silver(I) concentration profiles.

Can Single Cell Respiration be Measured by Scanning Electrochemical Microscopy (SECM)?

Ultramicroelectrode (UME), or, equivalently, microelectrode, probes are increasingly used for single-cell measurements of cellular properties and processes, including physiological activity, such as metabolic fluxes and respiration rates. Major challenges for the sensitivity of such measurements include: (i) the relative magnitude of cellular and UME fluxes (manifested in the current); and (ii) issues around the stability of the UME response over time. To explore the extent to which these factors impact the precision of electrochemical cellular measurements, we undertake a systematic analysis of measurement conditions and experimental parameters for determining single cell respiration rates via the oxygen consumption rate (OCR) in single HeLa cells. Using scanning electrochemical microscopy (SECM), with a platinum UME as the probe, we employ a self-referencing measurement protocol, rarely employed in SECM, whereby the UME is repeatedly approached from bulk solution to a cell, and a short pulse to oxygen reduction reaction (ORR) potential is performed near the cell and in bulk solution. This approach enables the periodic tracking of the bulk UME response to which the near-cell response is repeatedly compared (referenced) and also ensures that the ORR near the cell is performed only briefly, minimizing the effect of the electrochemical process on the cell. SECM experiments are combined with a finite element method (FEM) modeling framework to simulate oxygen diffusion and the UME response. Taking a realistic range of single cell OCR to be 1 × 10-18 to 1 × 10-16 mol s-1, results from the combination of FEM simulations and self-referencing SECM measurements show that these OCR values are at, or below, the present detection sensitivity of the technique. We provide a set of model-based suggestions for improving these measurements in the future but highlight that extraordinary improvements in the stability and precision of SECM measurements will be required if single cell OCR measurements are to be realized.

Fast Li-ion Storage and Dynamics in TiO2 Nanoparticle Clusters Probed by Smart Scanning Electrochemical Cell Microscopy.

Anatase TiO2 is a promising material for Li-ion (Li+ ) batteries with fast charging capability. However, Li+ (de)intercalation dynamics in TiO2 remain elusive and reported diffusivities span many orders of magnitude. Here, we develop a smart protocol for scanning electrochemical cell microscopy (SECCM) with in situ optical microscopy (OM) to enable the high-throughput charge/discharge analysis of single TiO2 nanoparticle clusters. Directly probing active nanoparticles revealed that TiO2 with a size of ≈50 nm can store over 30 % of the theoretical capacity at an extremely fast charge/discharge rate of ≈100 C. This finding of fast Li+ storage in TiO2 particles strengthens its potential for fast-charging batteries. More generally, smart SECCM-OM should find wide applications for high-throughput electrochemical screening of nanostructured materials.

Hybrid scanning electrochemical cell microscopy-interference reflection microscopy (SECCM-IRM): tracking phase formation on surfaces in small volumes.

We describe the combination of scanning electrochemical cell microscopy (SECCM) and interference reflection microscopy (IRM) to produce a compelling technique for the study of interfacial processes and to track the SECCM meniscus status in real-time. SECCM allows reactions to be confined to well defined nm-to-µm-sized regions of a surface, and for experiments to be repeated quickly and easily at multiple locations. IRM is a highly surface-sensitive technique which reveals processes happening (very) close to a substrate with temporal and spatial resolution commensurate with typical electrochemical techniques. By using thin transparent conductive layers on glass as substrates, IRM can be coupled to SECCM, to allow real-time in situ optical monitoring of the SECCM meniscus and of processes that occur within it at the electrode/electrolyte interface. We first use the technique to assess the stability of the SECCM meniscus during voltammetry at an indium tin oxide (ITO) electrode at close to neutral pH, demonstrating that the meniscus contact area is rather stable over a large potential window and reproducible, varying by only ca. 5% over different SECCM approaches. At high cathodic potentials, subtle electrowetting is easily detected and quantified. We also look inside the meniscus to reveal surface changes at extreme cathodic potentials, assigned to the possible formation of indium nanoparticles. Finally, we examine the effect of meniscus size and driving potential on CaCO3 precipitation at the ITO electrode as a result of electrochemically-generated pH swings. We are able to track the number, spatial distribution and morphology of material with high spatiotemporal resolution and rationalise some of the observed deposition patterns with finite element method modelling of reactive-transport. Growth of solid phases on surfaces from solution is an important pathway to functional materials and SECCM-IRM provides a means for in situ or in operando visualisation and tracking of these processes with improved fidelity. We anticipate that this technique will be particularly powerful for the study of phase formation processes, especially as the high throughput nature of SECCM-IRM (where each spot is a separate experiment) will allow for the creation of large datasets, exploring a wide experimental parameter landscape.

Artificial Synapse: Spatiotemporal Heterogeneities in Dopamine Electrochemistry at a Carbon Fiber Ultramicroelectrode.

An artificial synapse is developed that mimics ultramicroelectrode (UME) amperometric detection of single cell exocytosis. It comprises the nanopipette of a scanning ion conductance microscope (SICM), which delivers rapid pulses of neurotransmitter (dopamine) locally and on demand at >1000 defined locations of a carbon fiber (CF) UME in each experiment. Analysis of the resulting UME current-space-time data reveals spatiotemporal heterogeneous electrode activity on the nanoscale and submillisecond time scale for dopamine electrooxidation at typical UME detection potentials. Through complementary surface charge mapping and finite element method (FEM) simulations, these previously unseen variations in electrochemical activity are related to heterogeneities in the surface chemistry of the CF UME.

Using recurrence plots for the analysis of the nonlinear dynamical response of iron passivation-corrosion processes.

Recurrence plots (RPs) and recurrence quantification analysis (RQA) are used in this work to study different nonlinear dynamical regimes emerging in an electrochemical system, namely, the electrodissolution-passivation of iron in chloride-containing sulfuric acid solutions. Current oscillations at different applied potentials and chloride concentrations exhibit bifurcations from periodic to complex (bursting) periodic and aperiodic or chaotic behaviors, associated with different dissolution states of iron. The clarification of these transitions is essential to understand the type of corrosion (uniform or localized) taking place as well as the underlying mechanisms governing the stability of the metal. The RQA reveals that the predictability of the chloride-perturbed Fe|0.75M H2SO4 system strongly depends on the chloride concentration and the applied potential. At relatively low chloride concentrations, RQA measures, based on vertical and diagonal structures in RPs, display a decrease upon the breakdown of the passivity on iron and the initiation of localized corrosion (pitting). Phases of pitting corrosion (propagation/growth and unstable pitting) that followed pit initiation are discerned by keen changes of complexity measures upon varying the applied potential. At higher chloride concentrations, the evolution of RQA measures with the potential signifies a transition from the passive-active state dissolution to the polishing state dissolution of iron inside pits. The increase of the applied potential at late stages of pitting corrosion increases the nonlinear correlations and thus the complexity of the system decreases, which corroborates the RQA.

Panic Attack during Elective Gastrointestinal Endoscopy.

Background. Esophagogastroduodenoscopy (EGD) and colonoscopy (CS) can evoke anxiety, embarrassment, and discomfort. These concerns can culminate in panic attacks, which may traumatize patients and significantly decrease their compliance to the procedure. The objective of this study was to evaluate the relationship between preendoscopic anxiety and the possibility of a panic attack during an elective gastrointestinal endoscopy (EGE). Methods. The study population comprised of 79 Greek outpatients. The examination was carried out without the use of conscious sedation. Patients' anxiety levels were assessed before the procedure using the Greek version of the Spielberger State-Trait Anxiety Inventory (STAI-Y). Results. Seventy-nine patients were enrolled: 45 EGD and 34 CS. Females had higher state and trait anxiety levels than males (48.14 ± 7.94 versus 44.17 ± 7.43, P < 0.05; and 43.68 ± 6.95 versus 39.86 ± 7.46, P < 0.05). Patients who experienced panic attack had significantly higher levels of both trait and state anxiety, compared to those who were panic-free. There was no significant relationship between panic attacks and sex or type of procedure. Conclusions. Patients who experience panic attacks during endoscopic procedures appear to have significantly higher anxiety levels before the procedure. Administering the STAI questionnaire prior to the endoscopy seems to be a useful screening method for vulnerable patients.