Eco-Friendly Design of Chitosan-Based Films with Biodegradable Properties as an Alternative to Low-Density Polyethylene Packaging.

Biopolymer-based films are a promising alternative for the food packaging industry, in which petrochemical-based polymers like low-density polyethylene (LDPE) are commanding attention because of their high pollution levels. In this research, a biopolymer-based film made of chitosan (CS), gelatin (GEL), and glycerol (GLY) was designed. A Response Surface Methodology (RSM) analysis was performed to determine the chitosan, gelatin, and glycerol content that improved the mechanical properties selected as response variables (thickness, tensile strength (TS), and elongation at break (EAB). The content of CS (1.1% w/v), GEL (1.1% w/v), and GLY (0.4% w/v) in the film-forming solution guarantees an optimized film (OPT-F) with a 0.046 ± 0.003 mm thickness, 11.48 ± 1.42 mPa TS, and 2.6 ± 0.3% EAB. The OPT-F was characterized in terms of thermal, optical, and biodegradability properties compared to LDPE films. Thermogravimetric analysis (TGA) revealed that the OPT-F was thermally stable at temperatures below 300 °C, which is relevant to thermal processes in the food industry of packaging. The reduced water solubility (WS) (24.34 ± 2.47%) and the improved biodegradability properties (7.1%) compared with LDPE suggests that the biopolymer-based film obtained has potential applications in the food industry as a novel packaging material and can serve as a basis for the design of bioactive packaging.

Design of an antioxidant powder additive based on carvacrol encapsulated into a multilayer chitosan-alginate-maltodextrin emulsion.

Carvacrol has demonstrated antioxidant activity; however, its high volatility and low water solubility limit its direct application in food matrices. Then, an effective encapsulation system is required to protect it. This study aimed to design and characterize a carvacrol-based additive encapsulated in a spray-dried multilayer emulsion based on chitosan/sodium alginate/maltodextrin. Spray-drying temperature of 120 °C and 3 %(w/w) maltodextrin content maximized both encapsulation efficiency (~97 %) and loading capacity (~53 %). The powder's antioxidant properties were evaluated in two food simulant media: water (SiW) and water-ethanol (SiD). The highest antioxidant activity was observed in SiW for both ABTS•+ (8.2 ± 0.3mgEAG/g) and FRAP (4.1 ± 0.2mgEAG/g) methods because of the reduced release of carvacrol in SiD vs. SiW, as supported by micro- and macrostructural observations by SAXS and microscopy, respectively. An increase from 143 to 157 °C attributable to carvacrol protection and Tg = 44.4 °C (> ambient) were obtained by TGA and DSC, respectively. FT-IR confirmed intermolecular interactions (e.g. -COO- and -NH3+) as well as H-bonding formation. High water solubility (81 ± 3 %), low hygroscopicity (8.8 ± 0.2 %(w/w), poor flowability (CI:45 ± 4), and high cohesiveness (HR:1.8 ± 0.1) between particles were achieved, leading to a powdered antioxidant additive with high potential for applications which required avoiding/reducing oxidation on hydrophilic and hydrophobic food products.

Leukocyte- and Platelet-Rich Fibrin (L-PRF) Obtained from Smokers and Nonsmokers Shows a Similar Uniaxial Tensile Response In Vitro.

We evaluated and compared the biomechanical properties of Leukocyte-and Platelet Rich Fibrin L-PRF clots and membranes derived from smoker and nonsmoker donors. Twenty venous-blood donors (aged 18 to 50 years) were included after signing informed consent forms. L-PRF clots were analyzed and then compressed to obtain L-PRF membranes. L-PRF clot and membrane samples were tested in quasi-static uniaxial tension and the stress-stretch response was registered and characterized. Furthermore, scanning electron microscope representative images were taken to see the fibrin structure from both groups. The analysis of stress-stretch curves allowed us to evaluate the statistical significance in differences between smoker and nonsmoker groups. L-PRF membranes showed a stiffer response and higher tensile strength when compared to L-PRF clots. However, no statistically significant differences were found between samples from smokers and nonsmokers. With the limitations of our in vitro study, we can suggest that the tensile properties of L-PRF clots and membranes from the blood of smokers and nonsmokers are similar. More studies are necessary to fully characterize the effect of smoking on the biomechanical behavior of this platelet concentrate, to further encourage its use as an alternative to promote wound healing in smokers.

Heat losses in a trapezoidal cavity receiver of a linear Fresnel collector: A CFD approach.

This paper presents a thermal study of a cavity receiver designed for a Fresnel-type linear solar collector (LFC). The study utilizes a two-dimensional computational fluid dynamics (CFD) model implemented in ANSYS Fluent. The thermal behavior of air inside the cavity for a Fresnel collector is extensively examined. The receiver consists of a trapezoidal cavity with a set of six parallel absorber tubes, through which a thermal fluid circulates. The cavity has aluminum reflectors on the inner walls and glass window closing the aperture facing the primary reflectors of the solar collector. The two-dimensional numerical model represents a cross-section of the receiver, and aims to provide numerical results that allow to provide algebraic correlations for predicting heat losses in the receiver from the wall temperature of each of the six individual absorber tubes that compose it. The developed model is transient, utilizing the k-ε turbulent model. In addition, the study is completed with an analysis of the behavior of the air surrounding and inside the cavity, to evaluate its thermal performance. For this purpose, the velocity and temperature contours obtained with the two-dimensional model are discussed. Correlations are obtained to know the heat flux between the tubes and the heat loss through the window for any combination of temperatures for each pair of tubes, which has not been yet studied in the literature. The study reveals that radiative losses contribute to 81% of the total heat losses, with the outer tubes temperature being the main responsible for these losses. Furthermore, a dimensionless analysis examines the relationship between the Nusselt and Rayleigh numbers in comparison to reference problems based on canonical geometries dominated by buoyancy-driven flows. The performance is found to be similar to that of a downward hot flat plate.

Stormfires in La Palma, Chile: Shared Meanings Emerging from a Post-disaster Community Intervention / Tormenta de fuego en la palma (chile): significados compartidos surgidos de una intervención comunitaria postdesastre

RESUMEN Los desastres socioambientales afectan desigualmente a las zonas rurales en comparación con las urbanas. Esta realidad hace que la movilización de recursos comunitarios sea esencial para afrontar estos eventos. El objetivo de este trabajo fue analizar la construcción de significados derivados del proceso de intervención comunitaria posterior a un desastre (incendio forestal) entre la comunidad La Palma y el equipo de la Fundación Tierra de Esperanza, planteando como pregunta de investigación ¿Qué significados compartidos surgen del proceso de intervención vivenciado por la comunidad de La Palma y el equipo interventor? El estudio tuvo un diseño fenomenológico, utilizando análisis interpretativo del discurso. Los resultados muestran la emergencia de categorías vinculadas a procesos identitarios, ruralidad, y el despliegue de procesos psicosociales durante la experiencia de intervención vinculados con el afrontamiento comunitario, apoyo social, rol clave de liderazgos femeninos y aprendizajes de la comunidad. Se discute cómo la toma de conciencia de esta comunidad rural incrementó su capacidad de agencia ante eventos en los que cuentan con escaso apoyo gubernamental.

ABSTRACT Socio-environmental disasters affect rural areas unequally, compared to urban areas. This reality makes the mobilization of community resources essential when facing these events. The objective of this study was to analyze the construction of meanings derived from the process of community intervention after a disaster (forest fires) between the La Palma community and the Tierra de Esperanza Foundation team, posing as a research question: What shared meanings emerge from the intervention process experienced by the La Palma community and the intervention team? The study had a phenomenological design, using interpretative discourse analysis. The results show the emergence of categories linked to identity processes, rurality, and the unfolding of psychosocial processes during the intervention experience, linked to community coping, social support, the key role of female leadership, and community learning. It is discussed how the awareness of this rural community increased its capacity for agency in the face of events with little government support.

Antibacterial Activity of Electrospun Nanocomposites Fabricated by In Situ Chitosan/Silver Nanoparticles.

The process of disinfection of wastewater must use friendly materials with the environment that achieve the inhibition of bacterial growth, aiming to improve the quality of the water. In this study, electrospun nanocomposites CS (chitosan)/AgNPs (silver nanoparticles) was developed for wastewater disinfection through filtration. First, AgNPs were synthesized by a green synthesis method using aloe vera (Aloe Barbadensis Miller) extract as a reducing agent, and AgNO3 as metal precursor. AgNPs were characterized by UV-Vis spectroscopy with a SPR band at 420 nm. Transmission Electron Microscopy (TEM) demonstrates the formation of semispherical AgNPs with a diameter ca. 16 nm. The nanocomposites fibers CS/AgNPs were analyzed by scanning electron microscopy (SEM), with the presence of uniform fibers (diameter ca. 120 nm) and embedded AgNPs, determined by EDS and elemental mapping. Surface topography of CS/AgNPs fibers was evaluated by Atomic Force Microscopy (AFM), where the surface roughness of fibers is increased with the NPs content. Finally, the antibacterial activity (AA) of CS/AgNPs nanocomposites was evaluated against S. aureus and P. aeruginosa during 1 and 2 h of contact, obtaining an AA of 90 % in CS/AgNPs-2 mM after 2 h with P. aeruginosa. The fabrication of electrospun nanocomposites with silver nanoparticles represents a platform to the fabrication of multifunctional polymer membranes for wastewater disinfection.

Mental disorders in the media: A retrospective study of newspaper coverage in the Chilean Press.

BACKGROUND: The mass media are relevant in shaping the population's attitudes towards mental disorders. In low- and middle-income countries there is little information about the portrayal of people with mental disorders in the mass media. AIM: The general objective of the study was to assess the tone and content of Chilean newspaper articles about mental disorder from 2000 to 2019. METHOD: The digital editions of four national circulation Chilean newspapers were intentionally selected. The search engine Google News was used to identify and retrieve the news. To evaluate the news, a standardised codebook was administered. A total of 385 news were evaluated. RESULTS: The results show that a large proportion of the news items has an overall positive/optimistic tone 43.5% and 57.5% does not stigmatise; however, only 18.4% emphasises recovery as part of the content. The highest percentages of news stigmatising in tone and content are observed for bipolar disorder and schizophrenia. Furthermore, the experts are quoted much more frequently than people diagnosed with mental disorders or their families and/or friends. When comparing by years there is a trend towards general decrease in stigmatisation, moving towards a more positive or optimistic view of mental health. CONCLUSIONS: In general, low stigmatisation towards mental disorders was found in the news and this was reduced steadily over time. Although there are aspects to improve in some particular areas, suggesting that manifest stigma has diminished, but more subtle forms still remain.

Author Correction: Rapid fabrication of reinforced and cell-laden vascular grafts structurally inspired by human coronary arteries.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Rapid fabrication of reinforced and cell-laden vascular grafts structurally inspired by human coronary arteries.

Design strategies for small diameter vascular grafts are converging toward native-inspired tissue engineered grafts. A new automated technology is presented that combines a dip-spinning methodology for depositioning concentric cell-laden hydrogel layers, with an adapted solution blow spinning (SBS) device for intercalated placement of aligned reinforcement nanofibres. This additive manufacture approach allows the assembly of bio-inspired structural configurations of concentric cell patterns with fibres at specific angles and wavy arrangements. The middle and outer layers were tuned to structurally mimic the media and adventitia layers of native arteries, enabling the fabrication of small bore grafts that exhibit the J-shape mechanical response and compliance of human coronary arteries. This scalable automated system can fabricate cellularized multilayer grafts within 30 min. Grafts were evaluated by hemocompatibility studies and a preliminary in vivo carotid rabbit model. The dip-spinning-SBS technology generates constructs with native mechanical properties and cell-derived biological activities, critical for clinical bypass applications.

Impact of the Hydration States of Polymers on Their Hemocompatibility for Medical Applications: A Review.

Water has a key role in the functioning of all biological systems, it mediates many biochemical reactions, as well as other biological activities such as material biocompatibility. Water is often considered as an inert solvent, however at the molecular level, it shows different behavior when sorbed onto surfaces like polymeric implants. Three states of water have been recognized: non-freezable water, which does not freeze even at -100 °C; intermediate water, which freezes below 0 °C; and, free water, which freezes at 0 °C like bulk water. This review describes the different states of water and the techniques for their identification and quantification, and analyzes their relationship with hemocompatibility in polymer surfaces. Intermediate water content higher than 3 wt % is related to better hemocompatibility for poly(ethylene glycol), poly(meth)acrylates, aliphatic carbonyls, and poly(lactic-co-glycolic acid) surfaces. Therefore, characterizing water states in addition to water content is key for polymer selection and material design for medical applications.

Improving myoblast differentiation on electrospun poly(ε-caprolactone) scaffolds.

Polymer scaffolds are used as an alternative to support tissue regeneration when it does not occur on its own. Cell response on polymer scaffolds is determined by factors such as polymer composition, topology, and the presence of other molecules. We evaluated the cellular response of murine skeletal muscle myoblasts on aligned or unaligned fibers obtained by electrospinning poly(ε-caprolactone) (PCL), and blends with poly(lactic-co-glycolic acid) (PLGA) or decorin, a proteoglycan known to regulate myogenesis. The results showed that aligned PCL fibers with higher content of PLGA promote cell growth and improve the quality of differentiation with PLGA scaffolds having the highest confluence at over 68% of coverage per field of view for myoblasts and more than 7% of coverage for myotubes. At the same time, the addition of decorin greatly improves the quantity and quality of differentiated cells in terms of cell fusion, myotube length and thickness, being 71, 10, and 51% greater than without the protein, respectively. Interestingly, our results suggest that at certain concentrations, the effect of decorin on myoblast differentiation exceeds the topological effect of fiber alignment. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2241-2251, 2017.

Chitosan/poly-octanoic acid 2-thiophen-3-yl-ethyl ester blends as a scaffold to maintain myoblasts regeneration potential in vitro.

Satellite cells are a small cell population that function as muscle-specific adult stem cells. When muscle damage occurs, these cells are able to activate, proliferate, and ultimately fuse with each other in order to form new myofibers or fuse with existing ones. For tissue engineering applications, obtaining a sufficient number of myoblasts prior transplantation that maintains their regenerative capacity is critical. This can be obtained by in vitro expansion of autologous satellite cells. However, once plated, the self-renewal and regenerative capacity of myoblasts is rapidly lost, obtaining low yields per biopsy. For this purpose, we evaluated in vitro culture of the murine myoblast cell line C2C12 and mouse primary myoblasts with chitosan and chitosan/poly-octanoic acid 2-thiophen-3-yl-ethyl ester blends (poly(OTE)). The films of chitosan/poly(OTE) blends were heterogeneous and slightly rougher than chitosan and poly(OTE) films. Poly(OTE) presence improved myoblast adhesion in both cell types and prevented complete differentiation, but maintaining their differentiation potential in vitro. We identified that the polymer blend chitosan/poly(OTE) could be a suitable substrate to culture satellite cells/myoblasts in vitro preventing differentiation prior transplantation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 118-130, 2017.

Developing a Suitable Model for Water Uptake for Biodegradable Polymers Using Small Training Sets.

Prediction of the dynamic properties of water uptake across polymer libraries can accelerate polymer selection for a specific application. We first built semiempirical models using Artificial Neural Networks and all water uptake data, as individual input. These models give very good correlations (R (2) > 0.78 for test set) but very low accuracy on cross-validation sets (less than 19% of experimental points within experimental error). Instead, using consolidated parameters like equilibrium water uptake a good model is obtained (R (2) = 0.78 for test set), with accurate predictions for 50% of tested polymers. The semiempirical model was applied to the 56-polymer library of L-tyrosine-derived polyarylates, identifying groups of polymers that are likely to satisfy design criteria for water uptake. This research demonstrates that a surrogate modeling effort can reduce the number of polymers that must be synthesized and characterized to identify an appropriate polymer that meets certain performance criteria.

Investigating the Release of a Hydrophobic Peptide from Matrices of Biodegradable Polymers: An Integrated Method Approach.

The objectives of this work were: (1) to select suitable compositions of tyrosine-derived polycarbonates for controlled delivery of voclosporin, a potent drug candidate to treat ocular diseases, (2) to establish a structure-function relationship between key molecular characteristics of biodegradable polymer matrices and drug release kinetics, and (3) to identify factors contributing in the rate of drug release. For the first time, the experimental study of polymeric drug release was accompanied by a hierarchical sequence of three computational methods. First, suitable polymer compositions used in subsequent neural network modeling were determined by means of response surface methodology (RSM). Second, accurate artificial neural network (ANN) models were built to predict drug release profiles for fifteen polymers located outside the initial design space. Finally, thermodynamic properties and hydrogen-bonding patterns of model drug-polymer complexes were studied using molecular dynamics (MD) technique to elucidate a role of specific interactions in drug release mechanism. This research presents further development of methodological approaches to meet challenges in the design of polymeric drug delivery systems.

Multiscale analysis of water uptake and erosion in biodegradable polyarylates.

The role of hydration in degradation and erosion of materials, especially biomaterials used in scaffolds and implants, was investigated by studying the distribution of water at length scales from 0.1 nm to 0.1 mm using Raman spectroscopy, small-angle neutron scattering (SANS), Raman confocal imaging, and scanning electron microscopy (SEM). The measurements were demonstrated using L-tyrosine derived polyarylates. Bound- and free- water were characterized using their respective signatures in the Raman spectra. In the presence of deuterium oxide (D(2)O), H-D exchange occurred at the amide carbonyl but was not detected at the ester carbonyl. Water appeared to be present in the polymer even in regions where there was little evidence for N-H to N-D exchange. SANS showed that water is not uniformly dispersed in the polymer matrix. The distribution of water can be described as mass fractals in polymers with low water content (~5 wt%), and surface fractals in polymers with larger water content (15 to 60 wt%). These fluctuations in the density of water distribution are presumed to be the precursors of the ~ 20 µm water pockets seen by Raman confocal imaging, and also give rise to 10-50 µm porous network seen in SEM. The surfaces of these polymers appeared to resist erosion while the core of the films continued to erode to form a porous structure. This could be due to differences in either the density of the polymer or the solvent environment in the bulk vs. the surface, or a combination of these two factors. There was no correlation between the rate of degradation and the amount of water uptake in these polymers, and this suggests that it is the bound-water and not the total amount of water that contributes to hydrolytic degradation.