Understanding chiral molecular micellar separations using steady-state fluorescence anisotropy, capillary electrophoresis, and NMR.

Chiral separations employing four diastereomers of poly sodium N-undecanoyl leucylvalinate (p-SULV) as chiral selectors are probed by use of MEKC, steady-state fluorescence anisotropy, and NMR. By employing diastereomers and thus altering the stereochemistry of a single amino acid in a systematic way, one may control the enantiorecognition ability of the chiral selector. As a result, one can gain a better understanding of the mechanisms of chiral recognition for the two classes of neutral or anionic chiral analytes studied. Evaluation of the chiral interactions leading to chiral separations confirmed our earlier observation of a strong relationship between the selectivity (alpha) observed using a chromatographic separation technique (MEKC) and that determined from the spectroscopic parameter, beta. A linear alpha versus beta relationship was observed for the molecular micelle p-(L)-SULV with all eight analytes included in this study. However, as we earlier predicted, different groups of analytes had different slopes, i.e., values of m, suggesting different chiral separation mechanisms. Evaluation of the data allowed a grouping of the analytes according to the primary site of chiral interaction with the leucine or valine moiety of molecular micelle chiral headgroup.

Use of NMR binding interaction mapping techniques to examine interactions of chiral molecules with molecular micelles.

NMR spectroscopy was used to investigate the association of four chiral molecules with the molecular micelle poly(sodium N-undecanoyl-l-leucylvalinate) (poly(SULV)). Adding poly(SULV) to the background electrolyte in electrokinetic chromatography (EKC) allows enantiomeric resolution to be achieved because enantiomers interact differentially with the chiral centers on the micelle headgroups as they both move in the electric field. Pulsed field gradient diffusion experiments were used to measure molecular micelle association constants for enantiomers of each analyte. These association constants were consistent with EKC elution order for the compounds 1,1'-binaphthyl-2,2'-diyl hydrogen phosphate (BNP), 1,1'-bi-2-naphthol (BOH), and Troger's base. In addition, nuclear Overhauser enhancement spectroscopy, nuclear Overhauser effect difference, and intermolecular cross relaxation diffusion experiments were used to generate binding interaction maps for each chiral analyte. These maps showed that BNP and BOH inserted into the surfactant headgroup's major chiral groove and interacted predominately with the leucine chiral center. (+)-Troger's base was also found to insert into the major chiral groove. However, this compound instead interacted with the valine chiral atom. In diffusion experiments with long diffusion times, the linearized diffusion plots for each analyte-molecular micelle mixture showed curvature characteristic of intermolecular cross relaxation. The magnitude of this effect scaled linearly with the analytes' free energies of binding.

Combination of cyclodextrins and polymeric surfactants for chiral separations.

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method was applied to the enantioseparation of three binaphthyl derivatives using neutral CDs (i.e., beta- and gamma-CD) in combination with various chiral amino acid-based polymeric surfactants (PSs). Both the D- and L-configurations of poly(sodium N-undecanoyl alaninate), poly(sodium N-undecanoyl leucinate), and poly(sodium N-undecanoyl valinate) (poly(L-SUV)) were synthesized. The retention behavior of the three binaphthyl derivatives under optimum electrophoretic conditions using a single chiral additive (PS or CD) is discussed. In addition, the effect of CD cavity size and stereochemical configuration of polymeric surfactants on selectivity (alpha) and resolution (Rs) was investigated. The enantioseparation of (+/-)1,1'-binaphthyl-2,2'-diamine gave a reversal of enantiomeric order when using beta-CD in combination with any of the three D-configuration PS. However, better enantioseparation is obtained when using the corresponding L-configuration PS with beta-CD. A reversal of migration order (RMO) for the enantiomers of (+/-)1,1'-bi-2-naphthol was observed upon the addition of 10 mM gamma-CD to poly(L-SUV). However, no RMO of (+/-)1,1'-bi-2-naphthol was seen when either beta-CD or gamma-CD was combined with D-PS. The enantiomers of (+/-)1,1'-binaphthyl-2,2'-diyl hydrogen phosphate showed little enantioselective behavior toward the PS alone. However, combined D- or L-PS and beta-CD or gamma-CD systems gave increased Rs and alpha values. The chiral recognition of binaphthyl derivatives observed resulting from the various combinations of two chiral selectors is discussed.

Chiral separations using polymeric surfactants and polyelectrolyte multilayers in open-tubular capillary electrochromatography.

In this study, fused-silica capillaries are modified using a polyelectrolyte multilayer (PEM) coating procedure in open-tubular capillary electrochromatography. The PEM coating was constructed in situ with alternating rinses of positively and negatively charged polymers. The quaternary ammonium salt poly (diallyldimethylammonium chloride) was used as the cationic polymer, and the polymeric surfactant poly (sodium N-undecanoyl-l-leucylvalinate) was used as the anionic polymer. Previous studies have shown that the PEM-coated capillaries used for achiral separations have excellent reproducibilities and high stabilities against extreme pH values. In the current study, this PEM coating approach was applied to chiral separations of 1,1'-binaphthyl-2,2'-dihydrogenphosphate (BNP), 1,1'-bi-2-naphthol, secobarbital, pentobarbital, and temazepam. However, the PEM coating procedure used in the achiral studies needed to be significantly modified in order to achieve chiral separations. Optimal conditions were established by varying the additives (sodium chloride, 1-ethyl-3-methyl-1H-imidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate) in the polymer deposition solutions, the salt concentration, the column temperature, and the bilayer number. Reproducibilities were evaluated by use of the relative standard deviation (RSD) values of the electroosmotic flow (EOF) and the first peak ((R)-(+)-BNP). In all cases, the run-to-run and capillary-to-capillary RSD values of EOF were less than 0.5%, and the run-to-run RSD values of the (R)-(+)-BNP peak were less than 1%. In addition, more than 230 runs were performed on a single PEM-coated capillary.

Enantiomeric separations using polymeric L-glutamate surfactant derivatives: effect of increasing steric factors.

This study examines the role of steric hindrance near the stereogenic centers of four glutamic acid based polymeric surfactants. The single amino acid surfactants of glutamic acid, glutamic acid methyl ester, glutamic ethyl ester, and glutamic acid tert-butyl ester were investigated. The micellar electrokinetic chromatography (MEKC) separation of three binaphthyl derivatives and three benzodiazepines were used to study these steric factors. In addition, the hydrophobicity of these polymers as a function of pH was investigated by use of fluorescence measurements.

Polysodium N-undecanoyl-L-leucylvalinate: a versatile chiral selector for micellar electrokinetic chromatography.

Dipeptide micelle polymers are a new class of polymeric surfactants of which the polysodium undecanoyl-L-leucylvalinate (poly-L-SULV) was found to be a broadly applicable chiral selector for micellar electrokinetic chromatography. This negatively charged dipeptide micelle polymer is a high molecular weight compound with large countercurrent mobility, zero critical micelle concentration, low aggregation number, and high solubility in water or water-organic solvents. In an extensive chiral screening program, enantioseparation of 75 racemic compounds was tested with poly-L-SULV as chiral pseudostationary phase in neutral pH and basic pH background electrolytes. A total of 58 out of 75 racemic compounds could be resolved after choosing an appropriate concentration of poly-L-SULV. Although anionic chiral analytes are difficult to resolve using poly-L-SULV, the percent success rate for chiral resolution of cationic (77%) and neutral (85%) racemates was very high. Aspects regarding electrostatic, steric, hydrophobic, and hydrogen-bonding interactions of this dipeptide micelle polymer with various classes of chiral analytes are discussed.

A colloidal graphite-coated emitter for sheathless capillary electrophoresis/nanoelectrospray ionization mass spectrometry.

A colloidal graphite-coated emitter is introduced for sheathless capillary electrophoresis/nanoelectrospray ionization time-of-flight mass spectrometry (CE/ESI-TOFMS). The conductive coating can be produced by brushing the capillary tip to construct a fine layer of 2-propanol-based colloidal graphite. The fabrication involves a single step and requires less than 2 min. Full cure properties develop in approximately 2 h at room temperature and then the tip is ready for use. The coated capillary tip is applied as a sheathless electrospray emitter. The emitter has proven to bear stable electrospray and excellent performance for 50 microm i.d. x 360 microm o.d. and 20 microm i.d. x 360 microm o.d. capillaries within the flow rate of 80-500 nL/min; continuous electrospray can last for over 200 h in positive mode. Baseline separation and structure elucidation of two clinically interesting basic drugs, risperidone and 9-hydroxyrisperidone, are achieved by coupling pressure-assisted CE to ESI-TOFMS using the described sheathless electrospray emitter with a bare fused-silica capillary at pH 6.7. It is found that the signal intensity of m/z in sheathless CE/ESI-TOFMS at pH 6.7 is approximately 50 times higher than that at pH 9.0 for the two analytes, although the electroosmotic flow (EOF) at pH 9.0 provides sufficient flow rate (approximately 150 nL/min) to maintain electrospray.

Debilidades en las evaluaciones de impacto ambiental

Es la descripcion de la ficha ambiental de la perforacion de un pozo exploratorio de la empresa Total S.A., la que despues de ser revisada y evaluada fue clasificada eb la categoria II; por tanto se debia presentar un Estudio de Evaluacion de Impacto Ambiental Analitico especifico. En la primera parte se define a la Ficha Ambiental, se presenta el formulario, definicion de impactos, identificacion de impactos ambientales, que criterios se utilizan para realizar la categorizacion, categoria de las Fichas. Posteriormente, se detallan las actividades que se siguen para la perforacion del pozo exploratorio, identificacion y evaluacion de impactos ambientales, medidas de prevencion, control y mitigacion de los impactos ambientales, programa de restauracion, plan de abandono, observaciones que se realizaron al EEIA, finalmente la Declaracion de Impacto Ambiental.