Methodological quality of evidence-based clinical practice guidelines in cariology.

OBJECTIVE: The present study aimed to appraise the methodological quality of evidence-based Clinical Practice Guidelines (CPGs) in the cariology field. MATERIALS AND METHODS: A systematic search on electronic databases (MEDLINE/Pubmed, EMBASE, DARE and Epistemonikos), websites, and guideline organizations were undertaken. Evidence-based CPGs including at least one recommendation for clinical prevention and/or management of dental caries, developed for any clinical setting, were included. The quality of each guideline was evaluated using the AGREE II tool. Descriptive analysis was performed and the average overall score for each domain was calculated. RESULTS: Thirty-two guidelines were included. Most of the CPGs achieved higher scores for the domains of clarity of presentation (66.7%, 95% IC 37.3-52.2) and scope and purpose (59.6%, 95% IC 53.7-65.5) domains; and lower scores for editorial independence (46.1%, 95% IC 37.8-55.7) and applicability domain (44.7%, 95% IC 37-55.3). The reviewers assessed 12 CPGs (37.5%) as recommended for use, 15 (46.9%) recommended with modifications, and 5 (15.6%) as not recommended. CONCLUSION: The overall methodological quality of evidence-based CPGs in the cariology field is moderate, and there is a need for improvements in reporting related to most domains. The poorest reporting was found in the description of the domains' applicability of its recommendations and editorial independence. CLINICAL RELEVANCE: Clinical Practice Guidelines provide guidance to patients, healthcare professionals, and stakeholders. The quality of these documents is essential for establishing trust in their recommendations.

Methodological quality of network meta-analysis in dentistry: a meta-research.

This meta-research aimed to provide an overview of the methodological quality and risk of bias of network meta-analyses (NMA) in dentistry. Searches for NMA of randomized clinical trials with clinical outcomes in dentistry were performed in databases up to January 2022. Two reviewers independently screened titles/abstracts, selected full texts, and extracted the data. The adherence to PRISMA-NMA reporting guideline, the AMSTAR-2 methodological quality tool, and the ROBIS risk of bias tool were assessed in the studies. Correlation between the PRISMA-NMA adherence and the AMSTAR-2 and ROBIS results was also investigated. Sixty-two NMA studies were included and presented varied methodological quality. According to AMSTAR-2, half of the NMA presented moderate quality (n = 32; 51.6%). The adherence to PRISMA-NMA also varied. Only 36 studies (58.1%) prospectively registered the protocol. Other issues lacking of reporting were data related were data related to the NMA geometry and the assessment of results consistency, and the evaluation of risk of bias across the studies. ROBIS assessment showed a high risk of bias mainly for domains 1 (study eligibility criteria) and 2 (identification and selection of studies). Correlation coefficients between the PRISMA-NMA adherence and the AMSTAR-2 and ROBIS results showed moderate correlation (rho < 0.6). Overall, NMA studies in dentistry were of moderate quality and at high risk of bias in several domains, especially study selection. Future reviews should be better planned and conducted and have higher compliance with reporting and quality assessment tools.

Teaching of composite restoration repair in Brazilian dental schools.

OBJECTIVES: The aim was to investigate aspects of the teaching of restoration repair as a minimally invasive alternative to replacing defective direct composite restorations in undergraduate curricula teaching programs in Brazilian dental schools. METHODS: A 14-item validated survey questionnaire was mailed to directors/coordinators of operative/restorative dentistry teachers of Brazilian Dental Schools. Data were collected on demographic characteristics of the teachers and institutions, together with questions on the teaching of the repair of defective resin-based composite restorations as part of the school curriculum; the rationale behind the teaching; the nature of the teaching (preclinical and/or clinical); how techniques were taught, indications for repair, operative techniques, materials used, patient acceptability and expected longevity of completed repairs. RESULTS: Two hundred and twenty-two (94%) directors/ coordinators of dental curricula in Brazil were contacted. One hundred and thirty-one directors/coordinators (59%) replied, providing the e-mail address from the teacher responsible for the operative/restorative dentistry program in their school. Of these, 104 responded to the questionnaire (79% response rate). Ninety-three (89%) of the participating schools reported teaching composite repairs as an alternative to replacing restorations. Of the theoretical content, 43% was taught at preclinical and clinical levels, whereas most practical experience (53%) was acquired at clinical levels. Eighty-eight schools (95%) reported tooth substance preservation being the main reason for teaching repair techniques. All schools that taught repairs reported high patient acceptability. CONCLUSIONS: The teaching of composite restoration repair as an alternative to restoration replacement is established in undergraduate programs in most of the Brazilian dental schools surveyed. CLINICAL SIGNIFICANCE: The reasons for teaching restoration repair in Brazil were found to be quite unanimous among teachers, especially regarding the preservation of tooth structure. Variations were found in the clinical indications for repair, suggesting the need for further investigations. Monitoring repaired restorations should be encouraged and could contribute to future studies.

Methodological quality of network meta-analysis in dentistry: a meta-research

Abstract This meta-research aimed to provide an overview of the methodological quality and risk of bias of network meta-analyses (NMA) in dentistry. Searches for NMA of randomized clinical trials with clinical outcomes in dentistry were performed in databases up to January 2022. Two reviewers independently screened titles/abstracts, selected full texts, and extracted the data. The adherence to PRISMA-NMA reporting guideline, the AMSTAR-2 methodological quality tool, and the ROBIS risk of bias tool were assessed in the studies. Correlation between the PRISMA-NMA adherence and the AMSTAR-2 and ROBIS results was also investigated. Sixty-two NMA studies were included and presented varied methodological quality. According to AMSTAR-2, half of the NMA presented moderate quality (n = 32; 51.6%). The adherence to PRISMA-NMA also varied. Only 36 studies (58.1%) prospectively registered the protocol. Other issues lacking of reporting were data related were data related to the NMA geometry and the assessment of results consistency, and the evaluation of risk of bias across the studies. ROBIS assessment showed a high risk of bias mainly for domains 1 (study eligibility criteria) and 2 (identification and selection of studies). Correlation coefficients between the PRISMA-NMA adherence and the AMSTAR-2 and ROBIS results showed moderate correlation (rho < 0.6). Overall, NMA studies in dentistry were of moderate quality and at high risk of bias in several domains, especially study selection. Future reviews should be better planned and conducted and have higher compliance with reporting and quality assessment tools.

10-year practice-based evaluation of ceramic and direct composite veneers.

OBJECTIVES: This 10-year practice-based study aimed to compare survival and success of direct resin composite and ceramic veneers placed in a private dental practice, between January 2008 and March 2014. METHODS: Data were retrieved from a clinical practice's records and were anonymized typed into electronic files. All veneer information was recorded, including previous restorations, repairs or failures, materials used, dates, patient, and age. RESULTS: We analyzed 1459 veneer restorations, of which 1043 (71.5%) were direct composite, and 416 (28.5%) were ceramic, placed in 341 patients. The mean patients' age was 47.8 years, and the mean number of restorations per patient was 4.3 restorations. During all follow-up, 957 (65.6%) veneers were successful without any repair, 252 (17.3%) were repaired and still in place, and 250 (17.1%) had a failure that resulted in replacement. Replacements were usually carried out with the same material placed at first. Considering success analysis, annual failure rates (AFR) for veneers in 5 and 10 years were 9.1% and 10% for direct composite and 2.9% and 2.8% for ceramic, respectively. Survival analysis showed AFR of 3.9% and 4.1% for composite and 1.4% and 1.2% for ceramic at the same periods. Cox regression was made for both success and survival outcomes. Composite veneers presented a higher risk of failure than ceramic veneers with higher hazard ratios for survival (HR) [HR 4.00 (2.74-5.83)] and success [HR 5.16 (2.65-10.04)]. SIGNIFICANCE: Ceramic veneers had superior longevity than direct composite veneers in both success and survival analysis.

Influence of caries activity and number of saliva donors: mineral and microbiological responses in a microcosm biofilm model.

OBJECTIVE: this study evaluated the mineral and microbiological response of biofilms originating from different types of saliva inoculum with distinct levels of caries activity. METHODOLOGY: the biofilms grown over enamel specimens originated from saliva collected from a single donor or five donors with two distinct levels of caries activity (caries-active and caries-free) or from pooling saliva from ten donors (five caries-active and five caries-free). The percentage surface hardness change (%SHC) and microbiological counts served as outcome variables. RESULTS: the caries activity of donors did not affect the %SHC values. Inoculum from five donors compared to a single donor showed higher %SHC values (p=0.019). Higher lactobacilli counts were observed when saliva from caries-active donors was used as the inoculum (p=0.017). Pooled saliva from both caries activity levels showed higher mutans streptococci counts (p<0.017). CONCLUSION: Overall, pooled saliva increased the mineral response of the derived biofilms, but all the inoculum conditions formed cariogenic biofilms and caries lesions independently of caries activity.

Influence of caries activity and number of saliva donors: mineral and microbiological responses in a microcosm biofilm model

Abstract Objective this study evaluated the mineral and microbiological response of biofilms originating from different types of saliva inoculum with distinct levels of caries activity. Methodology the biofilms grown over enamel specimens originated from saliva collected from a single donor or five donors with two distinct levels of caries activity (caries-active and caries-free) or from pooling saliva from ten donors (five caries-active and five caries-free). The percentage surface hardness change (%SHC) and microbiological counts served as outcome variables. Results the caries activity of donors did not affect the %SHC values. Inoculum from five donors compared to a single donor showed higher %SHC values (p=0.019). Higher lactobacilli counts were observed when saliva from caries-active donors was used as the inoculum (p=0.017). Pooled saliva from both caries activity levels showed higher mutans streptococci counts (p<0.017). Conclusion Overall, pooled saliva increased the mineral response of the derived biofilms, but all the inoculum conditions formed cariogenic biofilms and caries lesions independently of caries activity.

Effect of cariogenic challenge on the stability of dentin bonds.

OBJECTIVE: The oral environment is subject to biofilm accumulation and cariogenic challenge, and few studies exist on the effect of these factors on the bond strength of adhesive systems. The aim of this study was to test if the exposure of adhesive interfaces to cariogenic challenge under biofilm accumulation could promote higher degradation than the exposure to biofilm accumulation alone. MATERIAL AND METHODS: Five molars were ground until exposure of medium dentin and then restored (Single Bond 2 and Z250 3M ESPE). The tooth/resin sets were cut to obtain beam-shaped specimens, which were distributed according to the aging conditions (n=20): water for 24 h (control); biofilm under cariogenic challenge for 3, 5 or 10 days; biofilm without cariogenic challenge for 10 days; and water for 3 months. Microcosm biofilms were formed from human saliva and grown in a saliva analogue medium, supplemented or not with sucrose to promote cariogenic challenge. Specimens were tested for microtensile bond strength, and failure modes were classified using light microscopy. Bond strength data were analyzed using ANOVA and failure modes were analyzed using ANOVA on ranks (α=0.05). RESULTS: No significant differences in bond strength were detected among the aging methods (P=0.248). The aging period was associated with an increase in the frequency of adhesive failures for the groups aged for 10 days or longer (P<0.001). CONCLUSION: Aging leads to a higher prevalence of interfacial adhesive failures, although this effect is not associated with cariogenic challenge or reduction in bond strengths.

Effect of cariogenic challenge on the stability of dentin bonds

Objective: The oral environment is subject to biofilm accumulation and cariogenic challenge, and few studies exist on the effect of these factors on the bond strength of adhesive systems. The aim of this study was to test if the exposure of adhesive interfaces to cariogenic challenge under biofilm accumulation could promote higher degradation than the exposure to biofilm accumulation alone. Material And Methods: Five molars were ground until exposure of medium dentin and then restored (Single Bond 2 and Z250 3M ESPE). The tooth/resin sets were cut to obtain beam-shaped specimens, which were distributed according to the aging conditions (n=20): water for 24 h (control); biofilm under cariogenic challenge for 3, 5 or 10 days; biofilm without cariogenic challenge for 10 days; and water for 3 months. Microcosm biofilms were formed from human saliva and grown in a saliva analogue medium, supplemented or not with sucrose to promote cariogenic challenge. Specimens were tested for microtensile bond strength, and failure modes were classified using light microscopy. Bond strength data were analyzed using ANOVA and failure modes were analyzed using ANOVA on ranks (α=0.05). Results: No significant differences in bond strength were detected among the aging methods (P=0.248). The aging period was associated with an increase in the frequency of adhesive failures for the groups aged for 10 days or longer (P<0.001). Conclusion: Aging leads to a higher prevalence of interfacial adhesive failures, although this effect is not associated with cariogenic challenge or reduction in bond strengths. .

Surface roughness of orthodontic band cements with different compositions.

OBJECTIVES: The present study evaluated comparatively the surface roughness of four orthodontic band cements after storage in various solutions. MATERIAL AND METHODS: Eight standardized cylinders were made from 4 materials: zinc phosphate cement (ZP), compomer (C), resin-modified glass ionomer cement (RMGIC) and resin cement (RC). Specimens were stored for 24 h in deionized water and immersed in saline (pH 7.0) or 0.1 M lactic acid solution (pH 4.0) for 15 days. Surface roughness readings were taken with a profilometer (Surfcorder SE1200) before and after the storage period. Data were analyzed by two-way ANOVA and Tukey's test (comparison among cements and storage solutions) or paired t-test (comparison before and after the storage period) at 5% significance level. RESULTS: The values for average surface roughness were statistically different (p<0.001) among cements at both baseline and after storage. The roughness values of cements in a decreasing order were ZP>RMGIC>C>R (p<0.001). After 15 days, immersion in lactic acid solution resulted in the highest surface roughness for all cements (p<0.05), except for the RC group (p>0.05). Compared to the current threshold (0.2 µm) related to biofilm accumulation, both RC and C remained below the threshold, even after acidic challenge by immersion in lactic acid solution. CONCLUSIONS: Storage time and immersion in lactic acid solution increased the surface roughness of the majority of the tested cements. RC presented the smoothest surface and it was not influenced by storage conditions.