Ambipolar surface conduction in oxygen sub-stoichiometric molybdenum oxide films.

The surface electric conduction in amorphous and crystallized molybdenum oxide films was studied as a function of electronic structure by current-voltage and simultaneous spectroscopic ellipsometry measurements on structures of the kind Al/Molybdenum oxide (MoOx)/Al, at temperatures up to 400 °C and in ambient air. At room temperature, both amorphous and crystalline MoOx samples were found to be sub-stoichiometric in oxygen. The random distribution of oxygen vacancies and the imperfect atomic ordering induced the creation of an intermediate band (IB) located near the valence band and of individual electronic gap states. At temperatures below 300 °C, the conduction was found to exhibit ambipolar character in which electrons and holes participated, the former moving in the conduction band and the latter in the IB and though gap states. Above 300 °C, due to samples gradual oxidation and improvement of atomic ordering (samples crystallization), the density of states in the IB and the gap gradually decreased. The above in their turn resulted in the gradual suppression of the ambipolar character of the conduction, which at 400 °C was completely suppressed and became similar to that of ordinary n-type semiconductor. The above phenomena were found to be reversible, so as the semiconducting MoOx samples were returning to room temperature the ambipolarity of the conduction was gradually re-appearing giving rise to an unusual phenomenon of "metallic" temperature variation of electrical resistance when electrons were injected.

Vanadium and tantalum doping of tin dioxide: a theoretical study.

The increasing demand of efficient optoelectronic devices such as photovoltaics has created a great research interest in methods to manipulate the electronic and optical properties of all the layers of the device. Tin dioxide (SnO2), due to his charge transport capability, high stability and easy fabrication is the main electron transport layer in modern photovoltaics which have achieved a record efficiency. While the wide band gap of SnO2 makes it an effective electron transport layer, its potential for other energy applications such as photocatalysis is limited. To further improve is conductivity and reduce its bandgap, doping or co-doping with various elements has been proposed. In the present density functional theory (DFT) study, we focus on the investigation of vanadium (V) and tantalum (Ta) doped SnO2 both in the bulk and the surface. Here we focus on interstitial and substitutional doping aiming to leverage these modifications to enhance the density of states for energy application. These changes also have the potential to influence the optical properties of the material, such as absorption, and make SnO2 more versatile for photovoltaic and photocatalytic applications. The calculations show the formation of gap states near the band edges which are beneficial for the electron transition and in the case of Ta doping the lowest bandgap value is achieved. Interestingly, in the case of Ta interstitial, deep trap states are formed which depending of the application could be advantageous. Regarding the optical properties, we found that V doping significantly increases the refractive index of SnO2 while the absorption is generally improved in all the cases. Lastly, we investigate the electronic properties of the (110) surface of SnO2, and we discuss possible other applications due to surface doping. The present work highlights the importance of V and Ta doping for energy applications and sensor applications.

Efficient and Stable Air-Processed Ternary Organic Solar Cells Incorporating Gallium-Porphyrin as an Electron Cascade Material.

Two gallium porphyrins, a tetraphenyl GaCl porphyrin, termed as (TPP)GaCl, and an octaethylporphyrin GaCl porphyrin, termed as (OEP)GaCl, were synthesized to use as an electron cascade in ternary organic bulk heterojunction films. A perfect matching of both gallium porphyrins' energy levels with that of poly(3-hexylthiophene-2,5-diyl) (P3HT) or poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) polymer donor and the 6,6-phenyl C71 butyric acid methyl ester (PCBM) fullerene acceptor, forming an efficient cascade system that could facilitate electron transfer between donor and acceptor, was demonstrated. Therefore, ternary organic solar cells (OSCs) using the two porphyrins in various concentrations were fabricated where a performance enhancement was obtained. In particular, (TPP)GaCl-based ternary OSCs of low concentration (1:0.05 vv%) exhibited a ~17% increase in the power conversion efficiency (PCE) compared with the binary device due to improved exciton dissociation, electron transport and reduced recombination. On the other hand, ternary OSCs with a high concentration of (TPP)GaCl (1:0.1 vv%) and (OEP)GaCl (1:0.05 and 1:0.1 vv%) showed the poorest efficiencies due to very rough nanomorphology and suppressed crystallinity of ternary films when the GaCl porphyrin was introduced to the blend, as revealed from X-ray diffraction (XRD) and atomic force microscopy (AFM). The best performing devices also exhibited improved photostability when exposed to sunlight illumination for a period of 8 h than the binary OSCs, attributed to the suppressed photodegradation of the ternary (TPP)GaCl 1:0.05-based photoactive film.

Neurobiological and pathophysiological concepts of Christfried Jakob (1866-1956) on language and aphasia: An English translation of two communications [1910,1932] and a modern perspective.

The aim of the present article is to preserve, in English translation, two historical communications on aphasia and the pathophysiology of language by the neurobiologist Christfried Jakob (1866-1956) of Buenos Aires, and to place them in a modern perspective. The morphofunctional basis of human language and its pathology occupied Jakob's mind over three decades. His synthetic conclusions were based on the neuropathological examination of dozens of aphasic cases from the Hospital de Las Mercedes and the National Women's Psychiatric Hospital between 1906 and 1936. Special mention is made of the role of the cerebellum, the thalamus, and their connections with the cerebral cortex, and the language network. Current research and imaging studies support and elaborate that which Jacob presented so many years ago; many of his analyses and ideas are informative and remain relevant today.

Light management for perovskite light-emitting diodes.

Perovskite light-emitting diodes (LEDs) have reached external quantum efficiencies of over 20% for various colours, showing great potential for display and lighting applications. Despite the internal quantum efficiencies of the best-performing devices already approaching unity, around 80% of the internally generated photons are trapped in the devices and lose energy through a variety of lossy channels. Significant opportunities for improving efficiency and maximizing photon extraction lie in the effective management of light. In this Review we analyse light management strategies based on the intrinsic optical properties of the perovskite materials and the extrinsic properties related to device structures. These approaches should allow the external quantum efficiencies of perovskite LEDs to substantially exceed the conventional limits of planar organic LED devices. By revisiting lessons learned from organic LEDs and perovskite solar cells, we highlight possible directions of future research towards perovskite LEDs with ultrahigh efficiencies.

Optimization of the hydrogen response characteristics of halogen-doped SnO2.

The increasing demand for efficient sensing devices with facile low-cost fabrication has attracted a lot of scientific research effort in the recent years. In particular, the scientific community aims to develop new candidate materials suitable for energy-related devices, such as sensors and photovoltaics or clean energy applications such as hydrogen production. One of the most prominent methods to improve materials functionality and performance is doping key device component(s). This paper aims to examine in detail, both from a theoretical and an experimental point of view, the effect of halogen doping on the properties of tin dioxide (SnO2) and provide a deeper understanding on the atomic scale mechanisms with respect to their potential applications in sensors. Density Functional Theory (DFT) calculations are used to examine the defect processes, the electronic structure and the thermodynamical properties of halogen-doped SnO2. Calculations show that halogen doping reduces the oxide bandgap by creating gap states which agree well with our experimental data. The crystallinity and morphology of the samples is also altered. The synergy of these effects results in a significant improvement of the gas-sensing response. This work demonstrates for the first time a complete theoretical and experimental characterization of halogen-doped SnO2 and investigates the possible responsible mechanisms. Our results illustrate that halogen doping is a low-cost method that significantly enhances the room temperature response of SnO2.

Photonic nanostructures mimicking floral epidermis for perovskite solar cells.

Here, we report photonic nanostructures replicated from the adaxial epidermis of flower petals onto light-polymerized coatings using low-cost nanoimprint lithography at ambient temperature. These multifunctional nanocoatings are applied to confer enhanced light trapping, water repellence, and UV light and environmental moisture protection features in perovskite solar cells. The former feature helps attain a maximum power conversion efficiency of 24.61% (21.01% for the reference cell) without any additional device optimization. Added to these merits, the nanocoatings also enable stable operation under AM 1.5G and UV light continuous illumination or in real-world conditions. Our engineering approach provides a simple way to produce multifunctional nanocoatings optimized by nature's wisdom.

Carbon Nanodots as Electron Transport Materials in Organic Light Emitting Diodes and Solar Cells.

Charge injection and transport interlayers play a crucial role in many classes of optoelectronics, including organic and perovskite ones. Here, we demonstrate the beneficial role of carbon nanodots, both pristine and nitrogen-functionalized, as electron transport materials in organic light emitting diodes (OLEDs) and organic solar cells (OSCs). Pristine (referred to as C-dots) and nitrogen-functionalized (referred to as NC-dots) carbon dots are systematically studied regarding their properties by using cyclic voltammetry, Fourier-transform infrared (FTIR) and UV-Vis absorption spectroscopy in order to reveal their energetic alignment and possible interaction with the organic semiconductor's emissive layer. Atomic force microscopy unravels the ultra-thin nature of the interlayers. They are next applied as interlayers between an Al metal cathode and a conventional green-yellow copolymer-in particular, (poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(1,4-benzo-{2,1',3}-thiadiazole)], F8BT)-used as an emissive layer in fluorescent OLEDs. Electrical measurements indicate that both the C-dot- and NC-dot-based OLED devices present significant improvements in their current and luminescent characteristics, mainly due to a decrease in electron injection barrier. Both C-dots and NC-dots are also used as cathode interfacial layers in OSCs with an inverted architecture. An increase of nearly 10% in power conversion efficiency (PCE) for the devices using the C-dots and NC-dots compared to the reference one is achieved. The application of low-cost solution-processed materials in OLEDs and OSCs may contribute to their wide implementation in large-area applications.

Comparison of intraocular pressure obtained by Goldmann applanation tonometer, Corvis ST and an airpuff tonometer in healthy adults.

PURPOSE: To assess the agreement among four types of intraocular pressure (IOP) measurements: IOP obtained by Goldmann applanation tonometer (IOP-GAT),IOP obtained by an air-puff tonometer (Nidek NT-510)(IOP-NCT), the non-corrected IOP obtained by the Corneal Visualization Scheimpflug Technology (IOP-Corvis) and the biomechanically corrected IOP obtained by the Corvis ST (bIOP-Corvis) in healthy patients with a broad spectrum of IOP values. Methods: This prospective, observational study recruited 113 healthy individuals. Each patient underwent IOP evaluation via GAT, Nidek NT-510 and Corvis ST. Difference in mean in IOP readings was assessed by one-way repeated-measures analysis of variance (ANOVA).Tonometer intermethod agreement was assessed by the Bland-Altman method. The difference between the four IOP measurements was correlated against corneal (CCT) and age with Pearson's correlation test. Results: IOP-Corvis showed the highest values (16.59 ± 3.08 mmHg),followed by IOP-NCT (16.05 ± 3.43 mmHg), IOP-GAT (15.62 ± 3.08 mmHg) and bIOP-Corvis (15.10 ± 2.67 mmHg).There were statistically significant differences in IOP measurements among all the ANOVA pairwise comparisons except between IOP-GAT and bIOP-Corvis (p = 0.07),as well as between IOP-GAT and IOP-NCT (p = 0.25). Bland Altman analysis revealed a notable bias (all p < 0.05) among IOP-GAT and bIOP-Corvis, IOP-GAT and IOP-Corvis, IOP-GAT and IOP-NCT, bIOP-Corvis and IOP-Corvis, bIOP-Corvis and IOP-NCT,IOP-Corvis and IOP-NCT of 0.51, -0.97, -0.43, -1.49, -0.95, 0.53 mmHg respectively. We observed a strong correlation of the difference between bIOP-Corvis and IOP-Corvis with CCT and patient age. Conclusion: Compared with GAT and Nidek NT-510, the Corvis-derived IOPs were recorded either the highest as IOP-Corvis or the lowest as bIOP-Corvis. Even if the differences among the tonometers were relatively small, the IOP values obtained with the Corvis ST, NCT and GAT were not interchangeable.

High efficiency blue organic light-emitting diodes with below-bandgap electroluminescence.

Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m-2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.

Impact of boron and indium doping on the structural, electronic and optical properties of SnO2.

Tin dioxide (SnO2), due to its non-toxicity, high stability and electron transport capability represents one of the most utilized metal oxides for many optoelectronic devices such as photocatalytic devices, photovoltaics (PVs) and light-emitting diodes (LEDs). Nevertheless, its wide bandgap reduces its charge carrier mobility and its photocatalytic activity. Doping with various elements is an efficient and low-cost way to decrease SnO2 band gap and maximize the potential for photocatalytic applications. Here, we apply density functional theory (DFT) calculations to examine the effect of p-type doping of SnO2 with boron (B) and indium (In) on its electronic and optical properties. DFT calculations predict the creation of available energy states near the conduction band, when the dopant (B or In) is in interstitial position. In the case of substitutional doping, a significant decrease of the band gap is calculated. We also investigate the effect of doping on the surface sites of SnO2. We find that B incorporation in the (110) does not alter the gap while In causes a considerable decrease. The present work highlights the significance of B and In doping in SnO2 both for solar cells and photocatalytic applications.

Preparation of hydrogen, fluorine and chlorine doped and co-doped titanium dioxide photocatalysts: a theoretical and experimental approach.

Titanium dioxide (TiO2) has a strong photocatalytic activity in the ultra-violet part of the spectrum combined with excellent chemical stability and abundance. However, its photocatalytic efficiency is prohibited by limited absorption within the visible range derived from its wide band gap value and the presence of charge trapping states located at the band edges, which act as electron-hole recombination centers. Herein, we modify the band gap and improve the optical properties of TiO2 via co-doping with hydrogen and halogen. The present density functional theory (DFT) calculations indicate that hydrogen is incorporated in interstitial sites while fluorine and chlorine can be inserted both as interstitial and oxygen substitutional defects. To investigate the synergy of dopants in TiO2 experimental characterization techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray and ultra-violet photoelectron spectroscopy (XPS/UPS), UV-Vis absorption and scanning electron microscopy (SEM) measurements, have been conducted. The observations suggest that the oxide's band gap is reduced upon halogen doping, particularly for chlorine, making this material promising for energy harvesting devices. The studies on hydrogen production ability of these materials support the enhanced hydrogen production rates for chlorine doped (Cl:TiO2) and hydrogenated (H:TiO2) oxides compared to the pristine TiO2 reference.

Acute Bilateral Anterior Uveitis following Cyclophosphamide/ Bortezomid/ Dexamethasone (CyBorD) Protocol in a Newly Diagnosed Multiple Myeloma Patient with Concomitant Use of Zoledronic Acid.

Purpose: To report a case of anterior uveitis in a patient under treatment with Cyclophosphamide / Bortezomid / Dexamethasone (CyBorD) protocol for Multiple Myeloma and concomitant use of Zoledronic acid.Methods: Observational case report of a 50-year-old woman presenting with acute, severe, bilateral uveitis on a medical history of Multiple Myeloma, undergoing the first cycle of CyBorD protocol, including infusion with Zoledronic acid.Results: Continuation of therapy, with parallel treatment with topical and per os steroids led to resolution of the inflammation. Three more chemotherapy cycles were performed with the same protocol including Zoledronic acid at a lower dosage and were all, uneventful.Conclusion: Our case mirrored uveitis cases with either masquerade syndrome due to Multiple Myeloma or following Zoledronic acid infusion, despite concomitant usage of Dexamethasone and Cyclophosphamide. Three consecutive rechallenges were performed without any topical prophylactic treatment and with no relapse of signs or symptoms.

Controlling Solar Hydrogen Production by Organizing Porphyrins.

In this study, a highly efficient photocatalytic H2 production system is developed by employing porphyrins as photocatalysts. Palladium and platinum tetracarboxyporphyrins (PdTCP and PtTCP) are adsorbed or coadsorbed onto TiO2 nanoparticles (NPs), which act as the electron transport medium and as a scaffold that promotes the self-organization of the porphyrinoids. The self-organization of PdTCP and PtTCP, forming H- and J-aggregates, respectively, is the key element for H2 evolution, as in the absence of TiO2 NPs no catalytic activity is detected. Notably, J-aggregated PtTCPs are more efficient for H2 production than H-aggregated PdTCPs. In this approach, a single porphyrin, which self-organizes onto TiO2 NPs, acts as the light harvester and simultaneously as the catalyst, whereas TiO2 serves as the electron transport medium. Importantly, the concurrent adsorption of PdTCP and PtTCP onto TiO2 NPs results in the most efficient catalytic system, giving a turnover number of 22,733 and 30.2 mmol(H2 ) g(cat)-1 .

Perovskite Flash Memory with a Single-Layer Nanofloating Gate.

Here we use triple-cation metal-organic halide perovskite single crystals for the transistor channel of a flash memory device. Moreover, we design and demonstrate a 10 nm thick single-layer nanofloating gate. It consists of a ternary blend of two organic semiconductors, a p-type polyfluorene and an n-type fullerene that form a donor:acceptor interpenetrating network that serves as the charge storage unit, and of an insulating polystyrene that acts as the tunneling dielectric. Under such a framework, we realize the first non-volatile flash memory transistor based on a perovskite channel. This simplified, solution-processed perovskite flash memory displays unique performance metrics such as a large memory window of 30 V, an on/off ratio of 9 × 107, short write/erase times of 50 ms, and a satisfactory retention time exceeding 106 s. The realization of the first flash memory transistor using a single-crystal perovskite channel could be a valuable direction for perovskite electronics research.

Molecular materials as interfacial layers and additives in perovskite solar cells.

Solar cells based on organo-metal halide perovskites have gained unprecedented research interest over the last few years due to their low-cost solution processability, high power conversion efficiency, which has recently reached a certified value of 25.2%, and abundance of raw materials. Nevertheless, the best efficiencies remain below the Shockley-Queisser theoretical limit of 32.5% due to several losses arising from either defect traps present in the bulk of the perovskite absorber or at the device heterointerfaces. While bulk defects are detrimental for the device performance by mainly limiting the open circuit voltage, interfacial layers are also crucial. They dictate the charge transfer/transport from the perovskite layer to the collecting electrodes, hence influencing the device photocurrent, but also act as protective barriers against oxygen and moisture penetration. Molecular materials and additives are widely used to improve the bulk properties of perovskite absorbers through the formation of high-quality perovskite films with superior optoelectronic properties, and improved crystallinity, and also of electronically clean interfaces with minimum losses during charge transfer/transport. In this review, we analyze the predominant pathways that contribute to voltage and current losses due to poor interfaces and also due to non-radiative recombination losses arising from inferior perovskite morphology and its inherent polycrystalline and highly defective nature. We then discuss strategies for achieving interfacial organic and inorganic molecular materials for application as electron and hole transport layers in perovskite solar cells with ideal energy levels, high charge mobilities and improved thermal, photo, and structural stability. Moreover, the prerequisites for molecular additives to achieve dimensionality engineering, defect passivation, molecular cross-linking, interfacial energy alignment and electronic doping are thoroughly discussed. Finally, we examine prospects for future research directions and commercialization.

Suppressing the Photocatalytic Activity of Zinc Oxide Electron-Transport Layer in Nonfullerene Organic Solar Cells with a Pyrene-Bodipy Interlayer.

Organic solar cells based on nonfullerene acceptors have recently witnessed a significant rise in their power conversion efficiency values. However, they still suffer from severe instability issues, especially in an inverted device architecture based on the zinc oxide bottom electron transport layers. In this work, we insert a pyrene-bodipy donor-acceptor dye as a thin interlayer at the photoactive layer/zinc oxide interface to suppress the degradation reaction of the nonfullerene acceptor caused by the photocatalytic activity of zinc oxide. In particular, the pyrene-bodipy-based interlayer inhibits the direct contact between the nonfullerene acceptor and zinc oxide hence preventing the decomposition of the former by zinc oxide under illumination with UV light. As a result, the device photostability was significantly improved. The π-π interaction between the nonfullerene acceptor and the bodipy part of the interlayer facilitates charge transfer from the nonfullerene acceptor toward pyrene, which is followed by intramolecular charge transfer to bodipy part and then to zinc oxide. The bodipy-pyrene modified zinc oxide also increased the degree of crystallization of the photoactive blend and the face-on stacking of the polymer donor molecules within the blend hence contributing to both enhanced charge transport and increased absorption of the incident light. Furthermore, it decreased the surface work function as well as surface energy of the zinc oxide film all impacting in improved power conversion efficiency values of the fabricated cells with champion devices reaching values up to 9.86 and 11.80% for the fullerene and nonfullerene-based devices, respectively.

A hysteresis-free perovskite transistor with exceptional stability through molecular cross-linking and amine-based surface passivation.

Organo-metal halide perovskite field-effect transistors present serious challenges in terms of device stability and hysteresis in the current-voltage characteristics. Migration of ions located at grain boundaries and surface defects in the perovskite film are the main reasons for instability and hysteresis issues. Here, we introduce a perovskite grain molecular cross-linking approach combined with amine-based surface passivation to address these issues. Molecular cross-linking was achieved through hydrogen bond interactions between perovskite halogens and dangling bonds present at grain boundaries and a hydrophobic cross-linker, namely diethyl-(12-phosphonododecyl)phosphonate, added to the precursor solution. With our approach, we obtained smooth and compact perovskite layers composed of tightly bound grains hence significantly suppressing the generation and migration of ions. Moreover, we achieved efficient surface passivation of the perovskite films upon surface treatment with an amine-bearing polymer, namely polyethylenimine ethoxylated. With our synergistic grain and surface passivation approach, we were able to demonstrate the first perovskite transistor with a complete lack of hysteresis and unprecedented stability upon continuous operation under ambient conditions. Added to the merits are its ambipolar transport of opposite carriers with balanced hole and electron mobilities of 4.02 and 3.35 cm2 V-1 s-1, respectively, its high Ion/Ioff ratio >104 and the lowest sub-threshold swing of 267 mV dec-1 reported to date for any perovskite transistor. These remarkable achievements obtained through a cost-effective molecular cross-linking of grains combined with amine-based surface passivation of the perovskite films open a new era and pave the way for the practical application of perovskite transistors in low-cost electronic circuits.

Enhanced Organic and Perovskite Solar Cell Performance through Modification of the Electron-Selective Contact with a Bodipy-Porphyrin Dyad.

Photovoltaic devices based on organic semiconductors and organo-metal halide perovskites have not yet reached the theoretically predicted power conversion efficiencies while they still exhibit poor environmental stability. Interfacial engineering using suitable materials has been recognized as an attractive approach to tackle the above issues. We introduce here a zinc porphyrin-triazine-bodipy donor-π bridge-acceptor dye as a universal electron transfer mediator in both organic and perovskite solar cells. Thanks to its "push-pull" character, this dye enhances electron transfer from the absorber layer toward the electron-selective contact, thus improving the device's photocurrent and efficiency. The direct result is more than 10% average power conversion efficiency enhancement in both fullerene-based (from 8.65 to 9.80%) and non-fullerene-based (from 7.71 to 8.73%) organic solar cells as well as in perovskite ones (from 14.56 to 15.67%), proving the universality of our approach. Concurrently, by forming a hydrophobic network on the surface of metal oxide substrates, it improves the nanomorphology of the photoactive overlayer and contributes to efficiency stabilization. The fabricated devices of both kinds preserved more than 85% of their efficiency upon exposure to ambient conditions for more than 600 h without any encapsulation.

Defect processes in F and Cl doped anatase TiO2.

Titanium dioxide represents one of the most widely studied transition metal oxides due to its high chemical stability, non-toxicity, abundance, electron transport capability in many classes of optoelectronic devices and excellent photocatalytic properties. Nevertheless, the wide bang gap of pristine oxide reduces its electron transport ability and photocatalytic activity. Doping with halides and other elements has been proven an efficient defect engineering strategy in order to reduce the band gap and maximize the photocatalytic activity. In the present study, we apply Density Functional Theory to investigate the influence of fluorine and chlorine doping on the electronic properties of TiO2. Furthermore, we present a complete investigation of spin polarized density functional theory of the (001) surface doped with F and Cl in order to elaborate changes in the electronic structure and compare them with the bulk TiO2.