Screening of Cyclodextrins in the Processing of Buserelin Dry Powders for Inhalation Prepared by Spray Freeze-Drying.

Purpose: In this study, we prepared inhalable buserelin microparticles using the spray freeze-drying (SFD) method for pulmonary drug delivery. Raffinose as a cryoprotectant carrier was combined with two levels of five different cyclodextrins (CDs) and then processed by SFD. Methods: Dry powder diameters were evaluated by laser light scattering and morphology was determined by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis were utilized for the determination of crystalline structures. The aerodynamic properties of the spray freeze-dried powders were evaluated by twin stage impinger (TSI) and the stability of prepared samples was assessed under normal and accelerated conditions. Results: The prepared powders were mostly porous spheres and the size of microparticles ranged from 9.08 to 13.53 µm, which are suitable as spray-freeze dried particles. All formulations showed amorphous structure confirmed by DSC and XRD. The aerosolization performance of the formulation containing buserelin, raffinose and 5% beta-cyclodextrin (ß-CD), was the highest and its fine particle fraction (FPF) was 69.38%. The more circular and separated structures were observed in higher concentrations of CDs, which were compatible with FPFs. The highest stability was obtained in the formulation containing hydroxypropyl beta-cyclodextrin (HP-ß-16. CD) 5%. On the contrary, sulfobutylether beta-cyclodextrin (SBE-ß-CD) 5% bearing particles showed the least stability. Conclusion: By adjusting the type and ratio of CDs in the presence of raffinose, the prepared formulations could effectively enhance the aerosolization and stability of buserelin. Therefore, they can be proposed as a suitable career for lung drug delivery.

Development of a Novel Histatin-5 Mucoadhesive Gel for the Treatment of Oral Mucositis: In Vitro Characterization and In Vivo Evaluation.

Antimicrobial peptides have appeared to be promising candidates for therapeutic purposes due to their broad antimicrobial activity and non-toxicity. Histatin-5 (Hst-5) is a notable salivary antimicrobial peptide that exhibited therapeutic properties in the oral cavity. Oral mucositis is an acute inflammation of the oral cavity, following cancer therapy. The current treatment methods of oral mucositis have low effectiveness. The aim of this study was to design, formulate and characterize a mucoadhesive gel delivery system for Hst-5 usage in the treatment of oral mucositis. Carbopol 934 and hydroxypropyl methylcellulose (HPMC) have been used in the development of a Hst-5 mucoadhesive gel that was optimized by using Box-Behnken design. The optimized formulation was evaluated in-vitro, based on mucoadhesive strength, viscoelasticity, spreadability, release rate, peptide secondary structure analysis, antimicrobial activity, and storage stability. The efficacy of Hst-5 gel was assessed in vivo in a chemotherapy-induced mucositis model. The results showed a sustained release of Hst-5 from the new formulation. Hst-5 gel exerted antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans. The histopathological, immunohistochemical and statistical analysis showed that the Hst-5 gel had wound healing activity in vivo. The findings of this study indicate that the mentioned compound possesses promising potential as a novel and efficient therapeutic agent in managing oral mucositis. Moreover, the results suggest that the compound is commercially feasible for further development and utilization.

Improved infectious burn wound healing by applying lyophilized particles containing probiotics and prebiotics.

Lactiplantibacillus plantarum cells were encapsulated in a mixture of cationic and anionic polymers, with the final composition stabilized through freeze-drying. A D-optimal design was used to examine the effects of different polymer concentrations as well as adding prebiotics on the probiotic viability and swelling behavior of the formulations. Scanning electron micrographs revealed stacked particles capable of rapidly absorbing significant amounts of water. These images corresponded to initial swelling percentages of around 2000% for the optimal formulation. The optimized formula had a viability percentage of more than 82%, with the stability studies suggesting that the powders should be stored at refrigerated temperatures. The physical characteristics of the optimized formula were examined to ensure compatibility with its application. According to antimicrobial evaluations, the difference in pathogen inhibition between formulated and fresh probiotics was less than a logarithm. The final formula was tested in vivo and showed improved wound healing indicators. The optimized formula resulted in a higher rate of wound closure and infection clearance. Furthermore, the molecular studies for oxidative stress indicated that the formula could modify wound inflammatory responses. In histological investigations, the probiotic-loaded particles functioned exactly as efficaciously as silver sulfadiazine ointment did.

Recent Advances in Oral Mucoadhesive Drug Delivery.

The oral cavity is one of the most important routes for local and systemic drug delivery, as it has a large surface, high permeability, and rich blood supply. Oral mucosal drug delivery has some advantages, such as enhancing bioavailability, preventing first-pass metabolism, reducing dose frequency, and non-invasiveness. In recent years, notable oral mucoadhesive patents were introduced to the pharmaceutical field, which indicates promising potentials for therapeutic purposes. Oral mucosal drug delivery can play a key role to deliver the biological drugs, such as antimicrobial peptides. This article gives an overview of oral mucoadhesive drug delivery systems and provides basic principles for the researchers to overcome the problems associated with the formulation design.

In Vitro-In Vivo Correlation for the Antibacterial Effect of Lactiplantibacillus plantarum as a Topical Healer for Infected Burn Wound.

Difficulties in delivering antimicrobial agents to wound areas and emersion of multiple drug resistant organisms (MDROs) have converted managing burn infections into a complicated task in medicine. Probiotics emerged not only as a probable solution for burn infections but also as an accelerator in the healing process. The probability of in vitro-in vivo correlation (IVIVC) in probiotic activity leads to lower costs in finding new therapeutic options. Simulated wound fluid (SWF) was used to evaluate the antibacterial function of Lactiplantibacillus plantarum in wounds. The growth parameters in SWF were evaluated using a logistic model to predict growth behavior in the wound area. In addition, probiotic antimicrobial activity and secretion of antibacterial substances in SWF were also studied. Data were used to select the initial dose and apply frequency for in vivo study. The wound models were infected by two main pathogens (Pseudomonas aeruginosa or Staphylococcus aureus). In vitro results showed less lag time associated with considerable acid production in SWF. In the following, secretion of antimicrobial substances and co-aggregation with pathogens became more important. The susceptibility of pathogens to these factors was different, and culture medium affected the yield of each factor involved in eliminating pathogens. Histological analysis and macroscopic examination of wounds revealed probiotics as effective as positive control or more. There were some differences in the antibacterial functions of probiotics in simulated and real wound environments. The in vitro effect of probiotics on removal of pathogens was not the same as the trend seen in vivo.

Spray freeze drying to solidify Nanosuspension of Cefixime into inhalable microparticles.

PURPOSE: Spray-freeze drying (SFD) incorporating diverse carbohydrates and leucine was employed to obtain dried nanosuspension of cefixime with improved dissolution profile, good dispersibility, and excellent inhalation performance. METHODS: Nanoprecipitation was utilized to prepare nanoparticles (NPs). Nanosuspensions of cefixime were solidified via SFD to access inhalable microparticles. The aerosolization efficiencies were evaluated through twin stage impinger (TSI). Laser light scattering and scanning electron microscopy (SEM) provided assistance to determine the particle size/size distribution and morphology, respectively. Amorphous/ crystalline states of materials were examined via differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Release profiles of candidate preparations were evaluated. RESULTS: The fine particle fraction (FPF) ranged from 18.96 ± 0.76 to 79.28 ± 0.45%. The highest value resulted from trehalose with NP/carrier ratio of 1:1 and leucine 20%. The particle size varied from 5.24 ± 0.97 to 10.17 ± 1.01 µm. The most and the least size distribution were achieved in mannitol and trehalose containing formulations, respectively. The majority of samples demonstrated ideally spherical morphology with diverse degrees of porosity and without needle-shaped structure. Percentages of release in F7 and F8 were 89.33 ± 0.88% and 93.54 ± 1.02%, respectively, via first 10 min. CONCLUSION: SFD of nanosuspensions can be established as a platform for the pulmonary delivery of poorly water-soluble molecules of cefixime. Trehalose and raffinose with a lower ratio of NP to the carrier and higher level of leucine could be introduced as favorable formulations for further respiratory delivery of cefixime.

Spray freeze-drying for inhalation application: process and formulation variables.

High porous particles with specific aerodynamic properties were processed by the spray freeze-drying (SFD) method. Comprehensive knowledge about all aspects of the SFD method is required for particle engineering of various pharmaceutical products with good flow properties. In this review, different types of the SFD method, the most frequently employed excipients, properties of particles prepared by this method, and most recent approaches concerning SFD are summarized. Generally, this technique can prepare spherical-shaped particles with a highly porous interior structure, responsible for the very low density of powders. Increasing the solubility of spray freeze-dried formulations achieves the desired efficacy. Also, due to the high efficiency of SFD, by determining the different features of this method and optimizing the process by model-based studies, desirable results for various inhaled products can be achieved and significant progress can be made in the field of pulmonary drug delivery.

Preparation and evaluation of adapalene nanostructured lipid carriers for targeted drug delivery in acne.

Adapalene (ADA) is believed to be one of the topical treatments utilized commonly in case of acne. Nanostructured lipid carriers (NLCs) have been established as an effective carrier system with certain advantages, for instance increased solubility, drug targeting, controlled drug release, and stability of ADA. This study was conducted to obtain the formulation with a good therapeutic property. All formulations were formed by probe sonicator and its characterizations were analyzed. Finally, the therapeutic effects of 0.1% ADA-loaded nanostructured lipid carriers (NLC-ADA) were evaluated. This formulation had a great entrapment efficiency (EE) that illustrated a controlled drug release profile. A pilot clinical evaluation conducted on 15 patients (age 25.23 ± 12.24 years) with mild to moderate acne vulgaris lesions. The results demonstrated significant reduction in acne severity index and the number of inflammatory and noninflammatory lesions after 12 weeks of treatment (P-value .02, .04, and .01, respectively). Subjective results were confirmed with significant improvement in size and intensity of porphyrin production in pilosebaceous follicles (P-value = .03). The study demonstrated that the formulation was safe and revealed the proper improvement rate of acne lesions after 12 weeks.

Novel combined topical gel of lidocaine-verapamil-nitroglycerin can dilate the radial artery and reduce radial pain during trans-radial angioplasty.

INTRODUCTION: Radial approach for coronary angioplasty is accepted by many specialists in medical centers around the world. The use of radial access is associated with fewer vascular complications and the same success rate in comparison with traditional femoral access. Radial artery spasm is one of the main concerns in this method. The small size of the radial artery and high density of alpha-1 adrenergic receptors in this artery can accelerate the spasm. The objects of this study were to evaluate whether the combined topical gel of lidocaine-verapamil-nitroglycerin could dilate the radial artery and reduce patient pain and sympathetic response during radial puncture. METHODS: Patients undergoing elective trans-radial angioplasty were randomized to either placebo or therapeutic gel group in single-center, double-blind study. Placebo or therapeutic gel applied 1 cm proximal to the radial styloid process. Radial artery size was measured by ultrasound. Radial pain was reported by the visual analog scale (VAS) and the sympathetic response was assessed by changes in systolic (SBP) and diastolic blood pressure (DBP) and heart rate (HR). The incidence of spasm was defined by the radial artery spasm score. RESULTS: 60 patients (30 patients in each group) participated in this study. A significant increase in the size of the radial artery was observed in the group receiving therapeutic gel compared to the placebo group (mean diameter, mm: 2.95 ± 0.48 vs. 2.54 ± 0.43, p = 0.001; area, cm2: 0.07 vs. 0.05, p = 0.001). During radial puncture, the radial pain intensity was significantly decreased in patients receiving therapeutic gel (4 (1-5) vs. 2 (1-2), p = 0.003). Radial artery spasm didn't happen in any group. CONCLUSION: Based on our results, Pre-procedural administration of combined topical gel of verapamil-nitroglycerin-lidocaine significantly increases the size of the radial artery and effectively reduces the radial pain during radial puncture in patients undergoing trans-radial angioplasty.

Topical Nifedipine for the Treatment of Pressure Ulcer: A Randomized, Placebo-Controlled Clinical Trial.

BACKGROUND: Effect of nifedipine on pressure ulcer (PU) healing has not been evaluated in the human subjects yet. STUDY QUESTION: In this study, the effect of topical application of nifedipine 3% ointment on PU healing in critically ill patients was investigated. STUDY DESIGN: This was a randomized, double-blind, placebo-controlled clinical. MEASURES AND OUTCOMES: In this study, 200 patients with stage I or II PU according to 2-digit Stirling Pressure Ulcer Severity Scale were randomized to receive topical nifedipine 3% ointment or placebo twice daily for 14 days. Changes in the size and stage of the ulcers were considered as primary outcome of the study. The stage of the ulcers at baseline and on day 7 and day 14 of study was determined by using 2-digit stirling scale. In addition, the surface area of the wounds was estimated by multiplying width by length. RESULTS: In total, 83 patients in each group completed the study. The groups were matched for the baseline stage and size of PUs. Mean decrease in the stage of PU in the nifedipine group was significantly higher than the placebo group on day 7 (-1.71 vs. -0.16, respectively, P < 0.001) and day 14 (-0.78 vs. -0.09, respectively, P < 0.001). Furthermore, the mean decrease in the surface area of PU was significantly higher in the nifedipine group compared with the placebo group on day 7 (-1.44 vs. -0.32, respectively, P < 0.001) and day 14 (-2.51 vs. -0.24, respectively, P < 0.001) of study. CONCLUSIONS: Topical application of nifedipine 3% ointment for 14 days significantly improved the healing process of stage I or II PUs in critically ill patients.

Hydroxypropyl beta cyclodextrin: a water-replacement agent or a surfactant upon spray freeze-drying of IgG with enhanced stability and aerosolization.

The great potential of hydroxypropyl beta-cyclodextrin (HPßCD), as a dried-protein stabilizer, has been attributed to various mechanisms namely water-replacement, vitrification and surfactant-like effects. Highlighting the best result in our previous study (weight ratio IgG: HPßCD of 1:0.4), herein we designed to evaluate the efficacy of upper (1:2) and lower (1:0.05) ratios of HPßCD in stabilization and aerosol properties of spray freeze-dried IgG. The protective effect of HPßCD, as measured by size exclusion chromatography (SEC-HPLC) was most pronounced at C3' and C3″, IgG:trehalose:HPßCD ratios of 1:2:0.25 and 1:2:0.05 with aggregation rate constants of 0.46 ± 0.02 and 0.58 ± 0.01 (1/month), respectively. The secondary conformations were analyzed through Fourier transform infrared spectroscopy (FTIR) and all powders well-preserved with the lack of any visible fragments qualified through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PPAGE). Scanning electron microscopy (SEM) and twin stage impinger (TSI) were employed to characterize the suitability of particles for further inhalation therapy of antibodies and the highest values of fine particle fraction (FPF) were achieved by C3' and C3″, 56.43 and 48.12%. The powders produced at the current ratio 1:2:0.25 and 1:2:0.05 are superior to our previous examination with regards to manifesting lower aggregation and comparable FPF values.

Human Serum Albumin, a Suitable Candidate to Stabilize Freeze-Dried IgG in Combination with Trehalose: Central Composite Design.

Freeze-dried immunoglobulin G (IgG) incorporating trehalose and human serum albumin (HSA) was statistically evaluated regarding the existence of synergism between additives on the stability profile. The levels of HSA (X1) and trehalose (X2) were independent variables. Aggregation following the process (Y1), after 2 and 3 months at 40°C (Y2) and (Y3), respectively, along with the rate constant of aggregation (Y4) were dependent variables. Aggregation and beta-sheet conformation were quantified through size-exclusion chromatography (SEC-HPLC) and Fourier transform infrared spectroscopy (FTIR). Central composite design (CCD) suggested the best formulation. The integrity and thermodynamic stability of optimized formulation were investigated through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and differential scanning calorimetry (DSC). The calculated responses were Y1, 0-0.90%; Y2, 0.4-4.3%; Y3, 2.10-13.46%; and Y4, 0.16-0.69 1/month. The optimized formulation had 10 mg IgG, 86 mg trehalose, and 1 mg HSA with observed responses of Y1, 0.01%; Y2, 0.51%; Y3, 3.08%; and Y4, 0.33 1/month. The models were statistically well-fitted. The optimized formulation was amorphous during freeze-drying (FD), and no fragmentation was observed. Trehalose and HSA demonstrated statistical synergism. CCD was successfully employed to recommend the best ratio of stabilizers and achieve the maximum stabilization of IgG as a model freeze-dried antibody.

Improvement of memory deficits in the rat model of Alzheimer's disease by erythropoietin-loaded solid lipid nanoparticles.

Erythropoietin (EPO), a hematopoietic factor, is one of the promising neuroprotective candidates in neurodegenerative disorders such as Alzheimer's disease (AD). Due to the high molecular weight, hydrophilicity and rapid clearance from circulation, EPO could not completely pass the blood-brain barrier in the case of systemic administration. To overcome this limitation, EPO-loaded Solid Lipid Nanoparticle (EPO-SLN) was developed in this study using a double emulsion solvent evaporation method (W1/O/W2). Glycerin monostearate (GMS), span®80/span®60, Dichloromethane (DCM) and tween®80 were chosen as lipid, internal phase surfactants, solvent, and external aqueous phase surfactant, respectively. After physicochemical evaluations, the effect of EPO-SLN on the beta-amyloid-induced AD-like animal model was investigated. In vivo evaluations, it was demonstrated that the memory was significantly restored in cognitive deficit rats treated with EPO-SLN compared to the rats treated with native drug using the Morris water maze test. In addition, EPO-SLN reduced the oxidative stress, ADP/ATP ratio, and beta-amyloid plaque deposition in the hippocampus more effectively than the free EPO. Hence, the designed SLN can be regarded as a promising system for safe and effective delivery of EPO in the AD.

Tadalafil nanocomposites as a dry powder formulation for inhalation, a new strategy for pulmonary arterial hypertension treatment.

Tadalafil (a phosphodiesterase-5 inhibitor) is a choice for treatment of pulmonary arterial hypertension (PAH) that is known as an increase in mean pulmonary arterial pressure ≥25 mmHg at rest and ≥30 mmHg during exercise with reduced cardiac output. The aim of this study was to prepare inhalable tadalafil nanocomposites as a dry powder formulation by spray drying technique for increasing bioavailability and treatment efficacy, as well as decreasing systemic side effects. The D-optimal design was used for optimization of formulation parameters. Microparticle size, morphology, crystallinity, density, solubility, redispersion (%), and in-vitro inhalation performance of tadalafil nanocomposites were investigated as physicochemical characteristics. Pharmacokinetic parameters were also evaluated in plasma and lung tissue of Wistar rats after intratracheal insufflation and compared with a control group receiving an oral tadalafil marketed product (dose = 10 mg/kg). The suggested optimum formulation contained stable amorphous particles with almost rounded shape and corrugated surface that were completely redispersed in the lung simulated medium with the mass median geometric diameter of 3.2 µm, density of 1.4 g/cm3, fine particle fraction based on emitted dose (%) of 57.2 ±â€¯6.5%, and 13.7-fold enhancement in dissolution rate. In-vivo studies showed that the ratio of AUC0-24h lung/AUC0-24h plasma, achieved in the treated group after intratracheal insufflation, was significantly higher than the control group that means high local drug concentration and more efficacy. Besides, plasma data analysis indicated high value of MRT (2.3-fold) and tmax (3.7-fold) after intratracheal insufflation of tadalafil nanocomposites in comparison with the conventional oral route, indicating longer retention of tadalafil molecules in the lungs and their slower entry to the systemic blood circulation. In conclusion, it seems that inhalable tadalafil nanocomposites can be introduced as an alternative to oral tadalafil in the treatment of PAH.

Optimization of Stable IgG Formulation Containing Amino Acids and Trehalose During Freeze-Drying and After Storage: a Central Composite Design.

The physical and structural stability of freeze-dried immunoglobulin G (IgG) were examined by applying trehalose and amino acids (glycine, phenylalanine, and serine). The efficacy of amino acids was statistically compared considering their side-chain characteristics. The amount of amino acids (X1) and trehalose (X2) was considered as independent variables. Size exclusion chromatography (SEC-HPLC) was utilized to calculate the soluble aggregates, as dependent variables. The amounts of excipients were optimized through the central composite design (CCD). The beta-sheet conformation of IgG was quantified by Fourier transform infrared spectroscopy (FTIR). Thermal behavior and molecular integrity of IgG were evaluated by differential scanning calorimetry (DSC) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Optimized formulations of powders were as follows: 24.5 mg serine-139.5 mg trehalose, 14 mg glycine-118 mg Trehalose, and 25 mg phenylalanine-139.5 mg trehalose. The amounts of soluble aggregates after processing were 0, 4.50, and 2.20%, respectively. The corresponding induced aggregates following storage conditions were 1.02, 7.0, and 3.70%. In all preparations, there were no detectable fragments. The native conformation of IgG was well preserved in the presence of amino acids. Excluding the glycine-based sample with minor endotherm at about 45°C, serine and phenylalanine incorporating powders were fully amorphous at examination temperatures. Trehalose was more potent than the amino acids in the stabilization of IgG. Serine was the most effective amino acid; phenylalanine and glycine were the next ones, respectively. Glycine crystallization was assumed to have accounted for low stabilization capability. The statistically synergistic phenomenon was only observed in the co-application of trehalose and phenylalanine. Graphical abstract.

Erythropoietin-loaded solid lipid nanoparticles: Preparation, optimization, and in vivo evaluation.

Solid lipid nanoparticle (SLN) is a promising approach for delivery of various drugs including proteins and peptides. However, the loading of hydrophilic drugs into the lipoid matrix of SLNs is challenging. The statistical design is a potential method facilitating the optimization of nanoparticles characteristics. In this study, the Box-Behnken design was conducted to optimize the preparation of Erythropoietin (EPO) loaded SLNs. Circular dichroism, size exclusion chromatography, SDS-PAGE, and ELISA tests were used to prove the compatibility of the process with the stability of EPO. In the controlled situation, EPO preserved its conformation and activity during the SLN preparation. Regarding the particle size, entrapment efficiency, and polydispersity index, an optimum formulation was obtained with 130 mg Span®80, 152.5 µl EPO, and 1.9 min high-shear homogenization. Using the optimum condition, 280 nm sized SLNs with the narrow size distribution of 0.282 and entrapment efficiency of 43.4% were acquired. The in vitro cytotoxicity of optimum SLN formulation was conducted using MTT assay to show its safety on the evaluated cell line. The in vivo studies demonstrated that 2500 U EPO loaded SLN has similar or even better effects on elevating the RBC, hemoglobin, and hematocrit level compared to the 5000 U EPO solution. Generally, this study proposed a suitable EPO-loaded SLN preparation method as a potential drug delivery system for proteins.

Respiratory Administration of Infliximab Dry Powder for Local Suppression of Inflammation.

The airways are verified as a relevant route to improve antibody therapeutic index with superior lung concentration but limited passage into systemic blood stream. The current research aimed to process spray-dried (SD) powder of Infliximab to assess the feasibility of respiratory delivery of antibody for local suppression of lung-secreted tumor necrosis factor α (TNFα). Molecular and structural stability of powders were determined through size exclusion chromatography (SEC-HPLC) and Fourier transform infrared (FTIR) spectroscopy. Particle properties were characterized by laser light scattering, twin stage impinger (TSI), and scanning electron microscopy (SEM). In vitro biological activity was quantified applying L-929 cell line. Ovalbumin (OVA)-challenged balb/c mice were employed to evaluate the anti-TNFα activity of antibody formulation as in vivo experimental model. SD sample consisting of 36 mg trehalose, 12 mg cysteine, and 0.05% of Tween 20 was selected with minimum aggregation/fragmentation rate constants of 0.07 and 0.05 (1/month) based on 1 and 2 months of storage at 40°C and relative humidity of 75%. Fine particle fraction (FPF) value of this formulation was 67.75% with desired particle size and surface morphology for respiratory delivery. EC50 was 8.176 and 6.733 ng/ml for SD Infliximab and Remicade®, respectively. SD antibody reduced TNFα (26.56 pg/ml) secretion in mouse lung tissue, more than 2 orders of magnitudes comparing positive control group (TNFα, 68.34 pg/ml). The success of antibody inhalation mainly depended on the spray drying condition, formulation components, and stability of antibody within aerosolization. Inhaled Infliximab could be a potential drug for local inhibition of lung inflammation.

Doxorubicin and Anti-PD-L1 Antibody Conjugated Gold Nanoparticles for Colorectal Cancer Photochemotherapy.

Colorectal cancer (CRC) is the third leading cause of cancer-related death worldwide. The prognosis and overall survival of CRC are known to be significantly correlated with the overexpression of PD-L1. Since combination therapies can significantly improve therapeutic efficacy, we constructed doxorubicin (DOX) conjugated and anti-PD-L1 targeting gold nanoparticles (PD-L1-AuNP-DOX) for the targeted chemo-photothermal therapy of CRC. DOX and anti-PD-L1 antibody were conjugated to the α-terminal end group of lipoic acid polyethylene glycol N-hydroxysuccinimide (LA-PEG-NHS) using an amide linkage, and PD-L1-AuNP-DOX was constructed by linking LA-PEG-DOX, LA-PEG-PD-L1, and a short PEG chain on the surface of AuNP using thiol-Au covalent bonds. Physicochemical characterizations and biological studies of PD-L1-AuNP-DOX were performed in the presence of near-infrared (NIR) irradiation (biologic studies were conducted using cellular uptake, apoptosis, and cell cycle assays in CT-26 cells). PD-L1-AuNP-DOX (40.0 ± 3.1 nm) was successfully constructed and facilitated the efficient intracellular uptake of DOX as evidenced by pronounced apoptotic effects (66.0%) in CT-26 cells. PD-L1-AuNP-DOX treatment plus NIR irradiation significantly and synergistically suppressed the in vitro proliferation of CT-26 cells by increasing apoptosis and cell cycle arrest. The study demonstrates that PD-L1-AuNP-DOX in combination with synergistic targeted chemo-photothermal therapy has a considerable potential for the treatment of localized CRC.

Formation of nanosuspensions in bottom-up approach: theories and optimization.

BACKGROUND: Nanosuspensions, liquid dispersions with nanometer size distribution, are becoming trendy in pharmaceutical practice to formulate poorly water-soluble drugs and to enhance their bioavailability. Generally, nanosuspensions are produced in two main approaches; top-down or bottom-up. The former is based on size-reduction of large particles via milling or high pressure homogenization. The latter is focused on the mechanisms of nucleation and particle growth. METHODS: In this review, the critical factors influencing the kinetics or dynamics of nucleation and growth are discussed. Subsequently, the mechanisms of nanosuspension instability as well as strategies for stabilization are elaborated. Furthermore, the effects of stabilizers on key parameters of instability as well as the process of choosing an appropriate stabilizer is discussed. RESULTS: Steric and electrostatic stabilizations or combination of them is essential for nanosuspensions formulation to prevent coagulation. Accordingly, some characteristics of stabilizers play critical role on stability and optimization of nanosuspensions; i.e., HLB and concentration. Nevertheless, after reviewing various articles, it is ascertained that each formulation requires individual selection of surfactants according to the parameters of the particle surface and the medium. CONCLUSIONS: Based on the results, application of excipients such as stabilizers requires proper optimization of type and concentration. This implies that each formulation requires its own optimization process. Graphical Abstract ᅟ.

Application of disaccharides alone and in combination, for the improvement of stability and particle properties of spray-freeze dried IgG.

PURPOSE: Spray-freeze drying (SFD) is a recently applied method to develop pharmaceutical powders. This study aimed to analyze the competence of Trehalose, Mannitol, Lactose, and Sorbitol instability and aerosolization of Immunoglobulin G (IgG) via SFD. METHODS: Induced soluble aggregates were quantified at 0 and 3 months, and 45 °C using size-exclusion chromatography. Conformation and thermogravimetric assessments were done by Fourier transform infrared spectroscopy and differential scanning calorimetry. Laser light scattering was performed to determine the particle sizes. Aerodynamic features were characterized by twin stage impinger and scanning electron microscopy. RESULTS: Although sugars/polyols preferably stabilized IgG following the process, storage stabilization was achieved in Trehalose, Trehalose-Lactose, Lactose, and Trehalose-Mannitol-based powders with soluble aggregates <5%. The conformation of antibody was preserved with ß sheet content from 66.28% to 76.37%. Particle sizes ranged from 5.23 to 8.12 µm. Mannitol exhibited the best aerodynamic behavior, fine particle fraction (FPF: 70%) but high degree of protein aggregation during storage. CONCLUSIONS: SFD could favorably stabilize antibody using Trehalose and its combination with Lactose and Mannitol, and also, Lactose alone. Sorbitol disturbed IgG powder recovery. Incorporation of other types of excipient is required for efficient respiratory delivery of IgG molecules.