Infrared spectroscopy across scales in length and time at BESSY†II.

The infrared beamline at BESSY II storage ring was upgraded recently to extend the capabilities of infrared microscopy. The endstations available at the beamline are now facilitating improved characterization of molecules and materials at different length scales and time resolutions. Here, the current outline of the beamline is reported and an overview of the endstations available is given. In particular, the first results obtained by using a new microscope for nano-spectroscopy that was implemented are presented. The capabilities of the scattering-type near-field optical microscope (s-SNOM) are demonstrated by investigating cellulose microfibrils, representing nanoscopic objects of a hierarchical structure. It is shown that the s-SNOM coupled to the beamline allows imaging to be performed with a spatial resolution of less than 30 nm and infrared spectra to be collected from an effective volume of less than 30 nm × 30 nm × 12 nm. Potential steps for further optimization of the beamline performance are discussed.

In situ infrared imaging of the local orientation of cellulose fibrils in plant secondary cell walls.

The mechanical and chemical properties of plant cell walls greatly rely on the supramolecular assembly of cellulose fibrils. To study the local orientation of cellulose in secondary plant cell walls, diffraction limited infrared (IR) micro-spectroscopic mapping experiments were conducted at different orientation of transverse leaf section of the grass Sorghum bicolor with respect to the polarization direction of the IR radiation. Two-dimensional maps, based on polarization-sensitive absorption bands of cellulose were obtained for different polarization angles. They reveal a significant degree of anisotropy of the cellulose macromolecules as well as of other biopolymers in sclerenchyma and xylem regions of the cross section. Quantification of the signals assigned to polarization sensitive vibrational modes allowed to determine the preferential orientation of the sub-micron cellulose fibrils in single cell walls. A sample of crystalline nano-cellulose comprising both a single microcrystal as well as unordered layers of nanocrystals was used for validation of the approach. The results demonstrate that diffraction limited IR micro-spectroscopy can be used to study hierarchically structured materials with complex anisotropic behavior.

Occurrence of polycyclic aromatic hydrocarbons, microplastics and biofilms in Alqueva surface water at touristic spots.

Freshwater pollution is a huge concern. A study aiming to evaluate physico-chemical characteristics, microbiota, occurrence of two groups of persistent environmental pollutants with similar chemical properties (polycyclic aromatic hydrocarbons- PAHs and microplastics - MPs) in Alqueva's surface water was performed during 2021. Water samples were collected at three spots related to touristic activities (two beaches and one marina) during the Winter, Spring, Summer and Autumn seasons. In addition, the presence of biofilms on plastic and natural materials (stone, wood/ vegetal materials) were assessed and compared. Water quality based on physicochemical parameters was acceptable with a low eutrophication level. PAHs concentration levels were lower than the standard limits established for surface waters by international organizations. However, carcinogenic compounds were detected in two sampling locations, which can pose a problem for aquatic ecosystems. PAHs profiles showed significant differences when comparing the dry seasons with the rainy seasons, with a higher number of different compounds detected in Spring. Low molecular weigh compounds, usually associated with the atmospheric deposition and petroleum contamination, were more prevalent. MPs were detected in all samples except one during the Winter season. The polymers detected were poly(methyl-2-methylpropenoate), polystyrene, polyethylene terephthalate, polyamide, polypropylene, styrene butadiene, polyvinyl chloride and low /high density polyethylene with the last being the most frequent. Biofilms were more often detected on plastics than on natural materials. In addition, biofilms detected on plastics were more complex with higher microbial diversity (e.g., bacteria, fungi/yeast and phytoplancton organisms) and richer in extrapolymeric material. Based on morphological analysis a good agreement between microbiota and microorganism present in the biofilms was found. Among microbiota were identified microorganisms previously linked to plastic and PAHs detoxification suggesting the need for further studies to evaluate the viability of using biofilms as part of a green bioremediation strategy to mitigate water pollution.

Coupling Raman, Brillouin and Nd3+ Photo Luminescence Spectroscopy to Distinguish the Effect of Uniaxial Stress from Cooling Rate on Soda-Lime Silicate Glass.

Evolution of spectroscopic properties of a soda-lime silicate glass with different thermal history and under applied uniaxial stress was investigated using Raman and Brillouin spectroscopies as well as Nd3+ photoluminescence techniques. Samples of soda-lime silicate with a cooling rate from 6 × 10-4 to 650 K/min were prepared either by controlled cooling from the melt using a differential scanning calorimeter or by a conventional annealing procedure. Uniaxial stress effects in a range from 0 to -1.3 GPa were investigated in situ by compression of the glass cylinders. The spectroscopic observations of rearrangements in the network structure were related to the set cooling rates or the applied uniaxial stress to calculate an interrelated set of calibrations. Comparing the results from Raman and Brillouin spectroscopy with Nd3+ photoluminescence analysis, we find a linear dependence that can be used to identify uniaxial stress and cooling rate in any given combination concurrently. The interrelated calibrations and linear dependence models are established and evaluated, and equations relating the change of glass network due to effects of cooling rate or uniaxial stress are given.

Radiation-Induced Defects and Effects in Germanate and Tellurite Glasses.

This review focuses on the radiation-induced changes in germanate and tellurite glasses. These glasses have been of great interest due to their remarkable potential for photonics, in terms of extended transmission window in the mid-infrared, ability of rare-earth loading suitable with a laser, and amplification in the near- and mid-infrared or high nonlinear optical properties. Here, we summarize information about possible radiation-induced defects, mechanisms of their formation, and the influence of the glass composition on this process. Special attention is paid to laser-induced structural modification of these glasses, including possible mechanisms of the laser-glass interaction, laser-induced crystallization, and waveguide writing. It is shown that these methods can be used for photostructuring of the glass and have great potential for practical applications.

Impact of ZnO Addition on Er3+ Near-Infrared Emission, the Formation of Ag Nanoparticles, and the Crystallization of Sodium Fluorophosphate Glass.

The impact of the progressive addition of ZnO up to 5 mol% on the thermal, structural, and optical properties of Er3+-doped phosphate glasses within the system NaPO3-NaF-ZnO-Ag2O is discussed. The glass network was found to depolymerize upon the addition of ZnO. This promotes a slight increase in the intensity of the emission at 1.5 µm as well as enhances the silver ions clustering ability under the heat treating. The Ag-nanoparticles formed after moderate heat-treatment can further enhance the emission at 1.5 µm, whereas an excessive amount of the clusters leads to the opposite effect. The addition of ZnO helps to slightly increase the glass ability of the system. The crystallization behavior study revealed that surface crystallization is observed for all the glasses. It is found that even a small ZnO addition changes the crystalline phases formed after devitrification. Moreover, the addition of ZnO decreases the crystallization tendency of the glass.

On the origin of near-IR luminescence in Bi-doped materials (II). Subvalent monocation Bi⁺ and cluster Bi5³âº luminescence in AlCl3/ZnCl2/BiCl3 chloride glass.

Broadband NIR photoluminescence (from 1000 to 2500 nm) was observed from partially reduced AlCl3/ZnCl2/BiCl3 glass, containing subvalent bismuth species. The luminescence consists of three bands, assigned to Bi⁺ , Bi24⁺, and Bi5³âº ions. The physical and optical characteristics of these centers and possible contribution to NIR luminescence from bismuth-doped oxide glasses are discussed.