Assessment of Bio-Based Materials as a Sustainable and Scalable Alternative for Detection of Plasmodium spp. (Haemospororida: Plasmodiidae) Sporozoites in Field Deployable Testing.

Malaria is responsible for over 435,000 deaths annually, mostly occurring in sub-Saharan Africa. Detecting Plasmodium spp. sporozoites (spzs) in the salivary glands of Anopheles (Diptera: Culicidae) vectors with circumsporozoite enzyme-linked immunosorbent assay (csELISA) is an important surveillance method. However, current technological advances are intellectual property and often require of distribution and highly trained users. The transition into paper-based rapid plataforms would allow for decentralization of survillance, especially in areas where it was virtually eliminated. The addition of bio-based materials have shown the potential to improve binding of target antigens, while being widely available. Here, we evaluate the use of chitosan and cellulose nanocrystals (CNC) as antibody carriers and substrate coatings on 96-well plates and on wax hydrophobized paper plates for the detection of Plasmodium falciparum (Pf), P. vivax VK210 (Pv210), and P. vivax VK247 (Pv247). To further improve the user-friendliness of the paper plates a quantitative photograph image-based color analysis was done. Interactions between the materials and the assay antibodies were studied by quartz crystal microbalance with dissipation monitoring (QCM-D). Overall, the addition of chitosan increased the interaction with antibodies and enhanced signaling in all tests. This work demonstrated that the adaptation of a PcsELISA shows potential as a cost-effective alternative assay platform easily adaptable in deployable testing sites that also showed reduction in reagent volumes by 80% and assay run time by seventh. While dipstick assays were previously developed, paper-based assays are a cost-effective and field-deployable alternative, reducing volumes of reagents that could be used in malaria control and elimination settings.

Environmentally dependent adsorption of 2,4-dichlorophenol on cellulose-chitosan self-assembled composites.

With the increasing need for bio-based materials developed by environmentally friendly procedures, this work shows a green method to develop shape-controlled structures from cellulose dissolving pulp coated by chitosan. This material was then tested to adsorb a common and widespread pollutant, 2,4-dichlorophenol under different pH conditions (5.5 and 9). Herein it was noticed that the adsorption only occurred in acidic pH (5.5) where electrostatic interaction drove the adsorption, demonstrating the potential to tune the response under desired conditions only. The adsorption was successful in the hydrogel structure with an adsorption capacity of 905 ± 71 mg/g from a solution with 16.6 ppm; furthermore, adsorption was also possible with dried hydrogel structures, presenting a maximum of adsorption of 646 ± 50 mg/g in a similar 16.6 ppm solution. Finally, adsorbent regeneration was successfully tested for both, dry (rewetted) and never-dried states, showing improved adsorption after regeneration in the case of the never dried hydrogel structures.

Cellulose-Cyclodextrin Co-Polymer for the Removal of Cyanotoxins on Water Sources.

With increasing global water temperatures and nutrient runoff in recent decades, the blooming season of algae lasts longer, resulting in toxin concentrations that exceed safe limits for human consumption and for recreational use. From the different toxins, microcystin-LR has been reported as the main cyanotoxin related to liver cancer, and consequently its abundance in water is constantly monitored. In this work, we report a methodology for decorating cellulose nanofibrils with ß-cyclodextrin or with poly(ß-cyclodextrin) which were tested for the recovery of microcystin from synthetic water. The adsorption was followed by Quartz Crystal Microbalance with Dissipation monitoring (QCM-D), allowing for real-time monitoring of the adsorption behavior. A maximum recovery of 196 mg/g was obtained with the modified by cyclodextrin. Characterization of the modified substrate was confirmed with Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA), and Atomic Force Microscopy (AFM).

Advanced Cellulose Fibers for Efficient Immobilization of Enzymes.

Biocatalytic pulp fibers were prepared using surface functionalization of bleached kraft pulp with amino groups (F) and further immobilization of a cross-linked glucose oxidase (G*) from Aspergillus niger. The cross-linked enzymes (G*) were characterized using X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic scanning calorimetry, and dynamic light scattering. According to standard assays, the G* content on the resulting fibers (FG*) was of 11 mg/g of fiber, and enzyme activity was of 215 U/g. The results from confocal- and stimulated emission depletion microscopy techniques demonstrated that glucose oxidase do not penetrate the interlayers of fibers. The benefit of pulp fiber functionalization was evident in the present case, as the introduction of amino groups allowed the immobilization of larger amount of enzymes and rendered more efficient systems. Using the approach described on this paper, several advanced materials from wood pulp fibers and new bioprocesses might be developed by selecting the correct enzyme for the target applications.