Electron-beam lithography of cinnamate polythiophene films: conductive nanorods for electronic applications.

We report the electron-beam induced crosslinking of cinnamate-substituted polythiophene proceeding via excited state [2+2]-cycloaddition. Network formation in thin films is evidenced by infrared spectroscopy and film retention experiments. For the polymer studied herin, the electron-stimulated process appears to be superior to photo (UV)-induced crosslinking as it leads to less degradation. Electron beam lithography (EBL) patterns cinnamate-substituted polythiophene thin films on the nanoscale with a resolution of around 100 nm. As a proof of concept, we fabricated nanoscale organic transistors using doped and cross-linked P3ZT as contact fingers in thin film transistors.

Iron Deficiency in Inflammatory Bowel Disease Is Associated With Low Levels of Vitamin D Modulating Serum Hepcidin and Intestinal Ceruloplasmin Expression.

INTRODUCTION: Iron deficiency and vitamin D deficiency are common comorbidities in inflammatory bowel disease (IBD). Accumulating evidence indicates that active 1,25-dihydroxyvitamin D (1,25(OH)D) may enhance iron absorption by suppressing hepcidin. We investigated the influence of vitamin D on iron metabolism in patients with IBD and on the expression of genes facilitating intestinal epithelial iron absorption. METHODS: Iron parameters and serum levels of 25-hydroxyvitamin D (25(OH)D), 1,25(OH)D, and hepcidin were measured in 104 adult patients with IBD (67 with Crohn's disease and 37 with ulcerative colitis). Genes involved in iron absorption were tested for induction by 1,25(OH)D in Caco-2 cells, which resemble the small intestinal epithelium. RESULTS: In multiple regression models controlling for age, sex, body mass index, smoking status, disease activity, and C-reactive protein levels, low 25(OH)D levels were associated with iron deficiency in patients with IBD (ß [SE] = -0.064 [0.030], P = 0.029). Vitamin D sufficiency was associated with increased levels of ferritin (ß [SE] = 0.25 [0.11], P = 0.024) and transferrin saturation (ß [SE] = 8.41 [4.07], P = 0.044). Higher 1,25(OH)D:25(OH)D ratios were associated with lower hepcidin levels (ß [SE] = -4.31 [1.67], P = 0.012). Especially in Crohn's disease, increased 1,25(OH)D correlated with higher transferrin saturation (ß [SE] = 0.43 [0.18], P = 0.027). Furthermore, 1,25(OH)D strongly induced the expression of the ferroxidase ceruloplasmin in Caco-2 cells. DISCUSSION: Low vitamin D levels in IBD correlate with iron deficiency. Vitamin D may ameliorate iron deficiency, potentially by downregulating hepcidin and upregulating ceruloplasmin, enhancing intestinal iron absorption.

Printing Poly( p-phenyleneethynylene) PLEDs.

Gravure printing of functional thin-film layers of side-chain-substituted poly( para-phenyleneethynylene)s (PPEs) is reported. Rheological properties of PPEs in combination with the Hansen solubility model allowed the formulation of enhanced single-component inks. Layer evaluation is performed with reflectometric thin-film recordings in an optical setup for laterally resolved large-area investigation using imaging color reflectometry. An organic light-emitting diode in a simple glass/indium tin oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/PPE/LiF-Al stack was gravure-printed from the improved ink showing excellent luminance (542 cd m-2, U = 11.5 V) for this polymer class.

Multimodal Hierarchical Imaging of Serial Sections for Finding Specific Cellular Targets within Large Volumes.

Targeting specific cells at ultrastructural resolution within a mixed cell population or a tissue can be achieved by hierarchical imaging using a combination of light and electron microscopy. Samples embedded in resin are sectioned into arrays consisting of ribbons of hundreds of ultrathin sections and deposited on pieces of silicon wafer or conductively coated coverslips. Arrays are imaged at low resolution using a digital consumer like smartphone camera or light microscope (LM) for a rapid large area overview, or a wide field fluorescence microscope (fluorescence light microscopy (FLM)) after labeling with fluorophores. After post-staining with heavy metals, arrays are imaged in a scanning electron microscope (SEM). Selection of targets is possible from 3D reconstructions generated by FLM or from 3D reconstructions made from the SEM image stacks at intermediate resolution if no fluorescent markers are available. For ultrastructural analysis, selected targets are finally recorded in the SEM at high-resolution (a few nanometer image pixels). A ribbon-handling tool that can be retrofitted to any ultramicrotome is demonstrated. It helps with array production and substrate removal from the sectioning knife boat. A software platform that allows automated imaging of arrays in the SEM is discussed. Compared to other methods generating large volume EM data, such as serial block-face SEM (SBF-SEM) or focused ion beam SEM (FIB-SEM), this approach has two major advantages: (1) The resin-embedded sample is conserved, albeit in a sliced-up version. It can be stained in different ways and imaged with different resolutions. (2) As the sections can be post-stained, it is not necessary to use samples strongly block-stained with heavy metals to introduce contrast for SEM imaging or render the tissue blocks conductive. This makes the method applicable to a wide variety of materials and biological questions. Particularly prefixed materials e.g., from biopsy banks and pathology labs, can directly be embedded and reconstructed in 3D.

Unraveling the nanoscale morphologies of mesoporous perovskite solar cells and their correlation to device performance.

Hybrid solar cells based on organometal halide perovskite absorbers have recently emerged as promising class for cost- and energy-efficient photovoltaics. So far, unraveling the morphology of the different materials within the nanostructured absorber layer has not been accomplished. Here, we present the first visualization of the mesoporous absorber layer in a perovskite solar cell from analytical transmission electron microscopy studies. Material contrast is achieved by electron spectroscopic imaging. We found that infiltration of the hole transport material into the scaffold is low and inhomogeneous. Furthermore, our data suggest that the device performance is strongly affected by the morphology of the TiO2 scaffold with a fine grained structure being disadvantageous.