Ascorbic acid and ascorbyl palmitate-loaded liposomes: Development, characterization, stability evaluation, in vitro security profile, antimicrobial and antioxidant activities.

The objective of this work was to prepare and characterize liposomes containing co-encapsulated ascorbic acid (AA) and ascorbyl palmitate (AP), as well as to evaluate their stability, cytotoxicity, antioxidant, and antimicrobial activity. Through the pre-formulation studies, it was possible to improve the formulation, as leaving it more stable and with a greater antioxidant activity, resulting in a formulation designated LIP-AAP, with 161 nm vesicle size, 0.215 polydispersity index, -31.7 mV zeta potential, and pH of 3.34. Encapsulation efficiencies were 37% for AA and 79% for AP, and the content was 1 mg/mL for each compound. The optimized liposomes demonstrated stability under refrigeration for 60 days, significant antioxidant activity (31.4 µMol of TE/mL), and non-toxicity, but no antimicrobial effects against bacteria and fungi were observed. These findings confirm that the co-encapsulated liposomes are potent, stable antioxidants that maintain their physical and chemical properties under optimal storage conditions.

A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples.

In this study, 3D-printing based on fused-deposition modeling (FDM) was employed as simple and cost-effective strategy to fabricate a novel format of rotating-disk sorptive devices. As proof-of-concept, twenty organochlorine and organophosphorus pesticides were determined in water samples through rotating-disk sorptive extraction (RDSE) using honeycomb-like 3D-printed disks followed by gas chromatography coupled to mass spectrometry (GC-MS). The devices that exhibited the best performance were comprised of polyamide + 15 % carbon fiber (PA + 15 % C) with the morphology being evaluated through X-ray microtomography. The optimized extraction conditions consisted of 120 min of extraction using 20 mL of sample at stirring speed of 1100 rpm. Additionally, liquid desorption using 800 µL of acetonitrile for 25 min at stirring speed of 1100 rpm provided the best response. Importantly, the methodology also exhibited high throughput since an extraction/desorption platform that permitted up to fifteen simultaneous extractions was employed. The method was validated, providing coefficients of determination higher than 0.9706 for all analytes; limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.15 to 3.03 µg L-1 and from 0.5 to 10.0 µg L-1, respectively. Intraday precision ranged from 4.01 to 18.73 %, and interday precision varied from 4.83 to 20.00 %. Accuracy was examined through relative recoveries and ranged from 73.29 to 121.51 %. This method was successfully applied to analyze nine groundwater samples from monitoring wells of gas stations in São Paulo. Moreover, the greenness was assessed through AGREEprep metrics, and an overall score of 0.69 was obtained indicating that the method proposed can be considered sustainable.

Ivermectin-Loaded Mesoporous Silica and Polymeric Nanocapsules: Impact on Drug Loading, In Vitro Solubility Enhancement, and Release Performance.

Ivermectin (IVM), a widely used drug for parasitic infections, faces formulation and application challenges due to its poor water solubility and limited bioavailability. Pondering the impact of IVM's high partition coefficient value (log P) on its drug release performance, it is relevant to explore whether IVM nanoencapsulation in organic or inorganic nanoparticles would afford comparable enhanced aqueous solubility. To date, the use of inorganic nanoparticles remains an unexplored approach for delivering IVM. Therefore, here we loaded IVM in mesoporous silica particles (IVM-MCM), as inorganic nanomaterial, and in well-known poly(ε-caprolactone) nanocapsules (IVM-NC). IVM-MCM had a well-organized hexagonal mesoporous structure, reduced surface area, and high drug loading of 10% w/w. IVM-NC had a nanometric mean size (196 nm), high encapsulation efficiency (100%), physicochemical stability as an aqueous dispersion, and drug loading of 0.1% w/w. Despite differing characteristics, both nanoencapsulated forms enhance IVM's aqueous intrinsic solubility compared to a crystalline IVM: after 72 h, IVM-MCM and IVM-NC achieve 72% and 78% releases through a dialysis bag, whereas crystalline IVM dispersion achieves only 40% drug diffusion. These results show distinct controlled release profiles, where IVM-NC provides a deeper sustained controlled release over the whole experiment compared to the inorganic nanomaterial (IVM-MCM). Discussing differences, including drug loading and release kinetics, is crucial for optimizing IVM's therapeutic performance. The study design, combined with administration route plans and safety considerations for humans and animals, may expedite the rational optimization of IVM nanoformulations for swift clinical translation.

Ivermectin: recent approaches in the design of novel veterinary and human medicines.

Ivermectin (IVM) is a drug widely used in veterinary and human medicine for the management of parasitic diseases. Its repositioning potential has been recently considered for the treatment of different diseases, such as cancer and viral infections. However, IVM faces some limitations to its formulations due to its low water solubility and bioavailability, along with reports of drug resistance. In this sense, novel technological approaches have been explored to optimize its formulations and/or to develop innovative medicines. Therefore, this review discusses the strategies proposed in the last decade to improve the safety and efficacy of IVM and to explore its novel therapeutic applications. Among these technologies, the use of micro/nano-drug delivery systems is the most used approach, followed by long-acting formulations. In general, the development of these novel formulations seems to run side by side in veterinary and human health, showing a shared interface between the two areas. Although the technologies proposed indicate a promising future in the development of innovative dosage forms containing IVM, its safety and therapeutic targets must be further evaluated. Overall, these approaches comprise tailoring drug delivery profiles, decreasing the risks of developing drug resistance, and supporting the application of IVM for reaching different therapeutic targets.

Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics.

Eudragit® polymers are polymethacrylates highly used in pharmaceutics for the development of modified drug delivery systems. They are widely known due to their versatility with regards to chemical composition, solubility, and swelling properties. Moreover, Eudragit polymers are thermoplastic, and their use has been boosted in some production processes, such as hot melt extrusion (HME) and fused deposition modelling 3D printing, among other 3D printing techniques. Therefore, this review covers the studies using Eudragit polymers in the development of drug delivery systems produced by HME and 3D printing techniques over the last 10 years. Eudragit E has been the most used among them, mostly to formulate immediate release systems or as a taste-masker agent. On the other hand, Eudragit RS and Eudragit L100-55 have mainly been used to produce controlled and delayed release systems, respectively. The use of Eudragit polymers in these processes has frequently been devoted to producing solid dispersions and/or to prepare filaments to be 3D printed in different dosage forms. In this review, we highlight the countless possibilities offered by Eudragit polymers in HME and 3D printing, whether alone or in blends, discussing their prominence in the development of innovative modified drug release systems.

Nanobiopesticides: development and inseticidal activity of nanoemulsions containing lemongrass or eucalyptus oils.

The bioinsecticides, like essential oils, are a promising alternative in pest control. However, these oils have some limitations, such as instability and low solubility. These limitations can be circumvented through nanotechnology, with the nanoemulsification of these compounds. Therefore, the objective of this study was to prepare, characterize and explore the insecticidal activity against adult flies of nanoemulsions containing essential oil of lemongrass or eucalyptus. The nanoemulsions were prepared by the high-energy method and presented droplet size smaller than 125 nm, with polydispersity index of 0.2, pH acid and spherical morphology. The insecticidal activity was evaluated by the Topical Application Method and Exposure Impregnated Paper Exposure, where it was possible to demonstrate a potential insecticidal effect of lemongrass oil in the concentrations of 10, 30 and 50 µL/mL against Musca domestica and Lucilia cuprina and the potentiation of this effect when nanoemulsified this oil against L. cuprina.

Hydrogel containing silibinin nanocapsules presents effective anti-inflammatory action in a model of irritant contact dermatitis in mice.

The current study developed an innovative Pemulen® TR2 hydrogel containing silibinin-loaded pomegranate oil-based nanocapsules (HP-NC SB) intending cutaneous application. The formulation anti-inflammatory activity in an in vivo model and biometric studies on the skin of healthy volunteers were also performed. The nanocapsules were prepared using the interfacial deposition of preformed polymer technique and the hydrogels were obtained by thickening of nanocapsules suspension with Pemulen® TR2. Formulations with free compound, vehicle and blank nanocapsules were also produced. The hydrogels were evaluated concerning pH, silibinin content, particle size, spreadability profile, rheology, in vitro drug release, cutaneous permeation, bioadhesive potential and cutaneous biometry evaluation. Furthermore, a model of contact dermatitis croton oil-induced in mice was performed to evaluate the hydrogels anti-inflammatory potential. The formulations presented adequate characteristics for skin administration: particle within nanometric size, pH values in the acid range, silibinin content close theoretical values (1 mg/g) and non-Newtonian pseudoplastic behavior. Nano-based hydrogels showed high bioadhesive properties, increased silibinin in vitro release profile and its retention in the stratum corneum. The best anti-inflammatory effect was exhibited by HP-NC SB, which reduced both ear edema and inflammatory cells infiltration in comparison to the induced group. Furthermore, cutaneous biometric evaluation showed that formulations containing free or nanoencapsulated silibinin caused no modification in normal skin conditions (pH, tissue hydration, transepidermal water loss and erythema). In summary, the results demonstrated that the Pemulen® TR2 hydrogel containing NC SB was successfully developed, indicating its potential as an alternative treatment for irritant contact dermatitis.