Impacts on product quality attributes of monoclonal antibodies produced in CHO cell bioreactor cultures during intentional mycoplasma contamination events.

A mycoplasma contamination event in a biomanufacturing facility can result in costly cleanups and potential drug shortages. Mycoplasma may survive in mammalian cell cultures with only subtle changes to the culture and penetrate the standard 0.2-µm filters used in the clarification of harvested cell culture fluid. Previously, we reported a study regarding the ability of Mycoplasma arginini to persist in a single-use, perfusion rocking bioreactor system containing a Chinese hamster ovary (CHO) DG44 cell line expressing a model monoclonal immunoglobulin G 1 (IgG1) antibody. Our previous work showed that M. arginini affects CHO cell growth profile, viability, nutrient consumption, oxygen use, and waste production at varying timepoints after M. arginini introduction to the culture. Careful evaluation of certain identified process parameters over time may be used to indicate mycoplasma contamination in CHO cell cultures in a bioreactor before detection from a traditional method. In this report, we studied the changes in the IgG1 product quality produced by CHO cells considered to be induced by the M. arginini contamination events. We observed changes in critical quality attributes correlated with the duration of contamination, including increased acidic charge variants and high mannose species, which were further modeled using principal component analysis to explore the relationships among M. arginini contamination, CHO cell growth and metabolites, and IgG1 product quality attributes. Finally, partial least square models using NIR spectral data were used to establish predictions of high levels (≥104 colony-forming unit [CFU/ml]) of M. arginini contamination, but prediction of levels below 104 CFU/ml were not reliable. Contamination of CHO cells with M. arginini resulted in significant reduction of antibody product quality, highlighting the importance of rapid microbiological testing and mycoplasma testing during particularly long upstream bioprocesses to ensure product safety and quality.

Bioprocess: Robustness with Respect to Mycoplasma Species.

Capture bioprocessing unit operations were previously shown to clear or kill several log10 of a model mycoplasma Acholeplasma laidlawii in lab-scale spike/removal studies. Here, we confirm this observation with two additional mollicute species relevant to biotechnology products for human use: Mycoplasma orale and Mycoplasma arginini Clearance of M. orale and M. arginini from protein A column purification was similar to that seen with A. laidlawii, though some between cycle carryover was evident, especially for M. orale However, on-resin growth studies for all three species revealed that residual mycoplasma in a column slowly die off over time rather than expanding further. Solvent/detergent exposure completely inactivated M. arginini though detectable levels of M. orale remained. A small-scale model of a commercial low-pH hold step did inactivate live M. orale, but this inactivation required a lower pH set point and occurred with slower kinetics than previously seen with A. laidlawii Additionally, ultraviolet-C irradiation was shown to be effective for A. laidlawii and M. orale inactivation whereas virus-retentive filters for upstream and downstream processes, as expected, cleared A. laidlawii These data argue that M. orale and M. arginini overall would be largely cleared by early bioprocessing steps as shown previously for A. laidlawii, and that barrier technologies can effectively reduce the risk from media components. For some unit operations, M. orale and M. arginini may be hardier, and require more stringent processing or equipment cleaning conditions to assure effective mycoplasma reduction. By exploring how some of the failure modes in commercial antibody manufacturing processes can still eliminate mycoplasma burden, we demonstrate that required best practices assure biotechnology products will be safe for patients.

Impacts of intentional mycoplasma contamination on CHO cell bioreactor cultures.

Mycoplasma contamination events in biomanufacturing facilities can result in loss of production and costly cleanups. Mycoplasma may survive in mammalian cell cultures with only subtle changes to the culture and may penetrate the 0.2 µm filters often used in the primary clarification of harvested cell culture fluid. Culture cell-based and indicator cell-based assays that are used to detect mycoplasma are highly sensitive but can take up to 28 days to complete and cannot be used for real-time decision making during the biomanufacturing process. To support real-time measurements of mycoplasma contamination, there is a push to explore nucleic acid testing. However, cell-based methods measure growth or colony forming units and nucleic acid testing measures genome copy number; this has led to ambiguity regarding how to compare the sensitivity of the methods. In addition, the high risk of conducting experiments wherein one deliberately spikes mycoplasma into bioreactors has dissuaded commercial groups from performing studies to explore the multiple variables associated with the upstream effects of a mycoplasma contamination in a manufacturing setting. Here we studied the ability of Mycoplasma arginini to persist in a single-use, perfusion rocking bioreactor system containing a Chinese hamster ovary (CHO) DG44 cell line expressing a model monoclonal immunoglobulin G1 (IgG1) antibody. We examined M. arginini growth and detection by culture methods, as well as the effects of M. arginini on mammalian cell health, metabolism, and productivity. We compared process parameters and controls normally measured in bioreactors including dissolved oxygen, gas mix, and base addition to maintain pH, to examine parameter changes as potential indicators of contamination. Our work showed that M. arginini affects CHO cell growth profile, viability, nutrient consumption, oxygen use, and waste production at varying timepoints after M. arginini introduction to the culture. Importantly, how the M. arginini contamination impacts the CHO cells is influenced by the concentration of CHO cells and rate of perfusion at the time of M. arginini spike. Careful evaluation of dissolved oxygen, pH control parameters, ammonia, and arginine over time may be used to indicate mycoplasma contamination in CHO cell cultures in a bioreactor before a read-out from a traditional method.

Real-time quantification and supplementation of bioreactor amino acids to prolong culture time and maintain antibody product quality.

Real-time monitoring of cell cultures in bioreactors can enable expedited responses necessary to correct potential batch failure perturbations which may normally go undiscovered until the completion of the batch and result in failure. Currently, analytical technologies are dedicated to real-time monitoring of bioreactor parameters such as pH, dissolved oxygen, and temperature, nutrients such as glucose and glutamine, or metabolites such as lactate. Despite the importance of amino acids as the building blocks of therapeutic protein products, other than glutamine their concentrations are not commonly measured. Here, we present a study into amino acid monitoring, supplementation strategies, and how these techniques may impact the cell growth profiles and product quality. We used preliminary bioreactor runs to establish baselines by determining initial amino acid consumption patterns, the results of which were used to select a pool of amino acids which gets depleted in the bioreactor. These amino acids were combined into blends which were supplemented into bioreactors during a subsequent run, the concentrations of which were monitored using a mass spectrometry based at-line method we developed to quickly assess amino acid concentrations from crude bioreactor media. We found that these blends could prolong culture life, reversing a viable cell density decrease that was leading to batch death. Additionally, we assessed how these strategies might impact protein product quality, such as the glycan profile. The amino acid consumption data were aligned with the final glycan profiles in principal component analysis to identify which amino acids are most closely associated with glycan outcomes.

Purification and Analytics of a Monoclonal Antibody from Chinese Hamster Ovary Cells Using an Automated Microbioreactor System.

Monoclonal antibodies (mAbs) are one of the most popular and well-characterized biological products manufactured today. Most commonly produced using Chinese hamster ovary (CHO) cells, culture and process conditions must be optimized to maximize antibody titers and achieve target quality profiles. Typically, this optimization uses automated microscale bioreactors (15 mL) to screen multiple process conditions in parallel. Optimization criteria include culture performance and the critical quality attributes (CQAs) of the monoclonal antibody (mAb) product, which may impact its efficacy and safety. Culture performance metrics include cell growth and nutrient consumption, while the CQAs include the mAb's N-glycosylation and aggregation profiles, charge variants, and molecular weight. This detailed protocol describes how to purify and subsequently analyze HCCF samples produced by an automated microbioreactor system to gain valuable performance metrics and outputs. First, an automated protein A fast protein liquid chromatography (FPLC) method is used to purify the mAb from harvested cell culture samples. Once concentrated, the glycan profiles are analyzed by mass spectrometry using a specific platform (refer to the Table of Materials). Antibody molecular weights and aggregation profiles are determined using size exclusion chromatography-multiple angle light scattering (SEC-MALS), while charge variants are analyzed using microchip capillary zone electrophoresis (mCZE). In addition to the culture performance metrics captured during the bioreactor process (i.e., culture viability, cell counts, and common metabolites including glutamine, glucose, lactate, and ammonia), spent media is analyzed to identify limiting nutrients to improve the feeding strategies and overall process design. Therefore, a detailed protocol for the absolute quantification of amino acids by liquid chromatography-mass spectrometry (LC-MS) of spent media is also described. The methods used in this protocol take advantage of high-throughput platforms that are compatible for large numbers of small-volume samples.

Use of High-Throughput Automated Microbioreactor System for Production of Model IgG1 in CHO Cells.

Automated microscale bioreactors (15 mL) can be a useful tool for cell culture engineers. They facilitate the simultaneous execution of a wide variety of experimental conditions while minimizing potential process variability. Applications of this approach include: clone screening, temperature and pH shifts, media and supplement optimization. Furthermore, the small reactor volumes are conducive to large Design of Experiments that investigate a wide range of conditions. This allows upstream processes to be significantly optimized before scale-up where experimentation is more limited in scope due to time and economic constraints. Automated microscale bioreactor systems offer various advantages over traditional small scale cell culture units, such as shake flasks or spinner flasks. However, during pilot scale process development significant care must be taken to ensure that these advantages are realized. When run with care, the system can enable high level automation, can be programmed to run DOE's with a higher number of variables and can reduce sampling time when integrated with a nutrient analyzer or cell counter. Integration of the expert-derived heuristics presented here, with current automated microscale bioreactor experiments can minimize common pitfalls that hinder meaningful results. In the extreme, failure to adhere to the principles laid out here can lead to equipment damage that requires expensive repairs. Furthermore, the microbioreactor systems have small culture volumes making characterization of cell culture conditions difficult. The number and amount of samples taken in-process in batch mode culture is limited as operating volumes cannot fall below 10 mL. This method will discuss the benefits and drawbacks of microscale bioreactor systems.

Impact of media and antifoam selection on monoclonal antibody production and quality using a high throughput micro-bioreactor system.

Monoclonal antibody production in commercial scale cell culture bioprocessing requires a thorough understanding of the engineering process and components used throughout manufacturing. It is important to identify high impact components early on during the lifecycle of a biotechnology-derived product. While cell culture media selection is of obvious importance to the health and productivity of mammalian bioreactor operations, other components such as antifoam selection can also play an important role in bioreactor cell culture. Silicone polymer-based antifoams were known to have negative impacts on cell health, production, and downstream filtration and purification operations. High throughput screening in micro-scale bioreactors provides an efficient strategy to identify initial operating parameters. Here, we utilized a micro-scale parallel bioreactor system to study an IgG1 producing CHO cell line, to screen Dynamis, ProCHO5, PowerCHO2, EX-Cell Advanced, and OptiCHO media, and 204, C, EX-Cell, SE-15, and Y-30 antifoams and their impacts on IgG1 production, cell growth, aggregation, and process control. This study found ProCHO5, EX-Cell Advanced, and PowerCHO2 media supported strong cellular growth profiles, with an IVCD of 25-35 × 106 cells-d/mL, while maintaining specific antibody production (Qp > 2 pg/cell-d) for our model cell line and a monomer percentage above 94%. Antifoams C, EX-Cell, and SE-15 were capable of providing adequate control of foaming while antifoam 204 and Y-30 noticeably stunted cellular growth. This work highlights the utility of high throughput micro bioreactors and the importance of identifying both positive and negative impacts of media and antifoam selection on a model IgG1 producing CHO cell line. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 34:262-270, 2018.