RESUMO
Extensive research has already provided reliable methods for the inâ silico prediction of pKa, while a trustworthy strategy for pKb determination is still being sought. Indeed, the approaches previously exploited for computing pKa have shown their weakness in predicting pKb. In the light of the exceptional reliability demonstrated in the pKa calculation of a wide panel of organic acids, in this work, we exploited our "easy to use methodology", based on the direct approach, to predict the pKb of primary amines. Herein, CAM-B3LYP was compared to WB97XD and B3PW91, exploring the solvation model based on density (SMD) and the polarizable continuum model (PCM), in the presence of two explicit water molecules. Noteworthy, CAM-B3LYP and WB97XD returned completely different solvent accessible surfaces (SAS) and electron potential maps (EPM) for the bases and the conjugated acids, independently from the nature of the substituents. Once again, CAM-B3LYP/SMD/2H2O method confirmed its remarkable reliability, leading to a minimum average error (MAE) lower than 0.3. This outstanding result strengthens the trustworthiness of our method, already successfully applied to predict the pKa of different substituted phenols and carboxylic acids. Thus, our "easy-to-use" process can predict also the pKb of primary ammines and anilines, always ensuring consistent outputs.
RESUMO
The selection of a "perfect tool" for the theoretical determination of acid-base dissociation constants (Ka) is still puzzling. Recently, we developed a user-friendly model exploiting CAM-B3LYP for determining pKa with impressive reliability. Herein, a new challenge is faced, examining a panel of functionals belonging to different rungs of the "Jacob's ladder" organization, which classifies functionals according to their level of theory. Specifically, meta-generalized gradient approximations (GGAs), hybrid-GGAs, and the more complex range-separated hybrid (RSH)-GGAs were investigated in predicting the pKa of differently substituted carboxylic acids. Therefore, CAM-B3LYP, WB97XD, B3PW91, PBE1PBE, PBEPBE and TPSSTPSS were used, with 6-311G+(d,p) as the basis set and the solvation model based on density (SMD). CAM-B3LYP showed the lowest mean absolute error value (MAE = 0.23) with relatively high processing time. PBE1PBE and B3PW91 provided satisfactory predictions (MAE = 0.34 and 0.38, respectively) with moderate computational time cost, while PBEPBE, TPSSTPSS and WB97XD led to unreliable results (MAE > 1). These findings validate the reliability of our model in predicting carboxylic acids pKa, with MAE well below 0.5 units, using a simplistic theoretical level and a low-cost computational approach.
RESUMO
In pKa computational determination, the challenge in exploring and fostering new methodologies and approaches goes in parallel with the amelioration of computational performances. In this paper a "ready to use methodology" has been compared to other strategies, such as the re-shaping in solvation cavity (Bondi radius re-shaping), wanting to assess its reliability in predicting the pKa of a broad list of carboxylic acids. Thus, the functionals B3LYP and CAM-B3LYP have been selected, using SMD as continuum solvation model. Exploiting our previous results, two water molecules were made explicit on the reaction centre. Data show that our model (CAM-B3LYP/2H2 O) is capable to accurately predict pKa, leading to mean absolute error (MAE) values lower than 0.5. Noteworthy, good results were achieved in computing the pKa of substituents bearing nitro and cyano groups. Focusing on B3LYP, eventually remarkable outputs were obtained only when Bondi correction was applied to the complex with two water molecules. Hence, massive outcomes were obtained in foreseeing the trichloro and trifluoro acetic acid pKa. These findings demonstrated that no complex level of theory nor external factor is required to accurately predict carboxylic acids pKa, with MAE well below 0.5â units.
RESUMO
The pharmacokinetics of peptide drugs are strongly affected by their aggregation properties and the morphology of the nanostructures they form in their native state as well as in their therapeutic formulation. In this contribution, we analyze the aggregation properties of a Liraglutide analogue (LG18), a leading drug against diabetes type 2. LG18 is a lipopeptide characterized by the functionalization of a lysine residue (K26) with an 18C lipid chain. To this end, spectroscopic experiments, dynamic light scattering measurements, and molecular dynamics simulations were carried out, following the evolution of the aggregation process from the small LG18 clusters formed at sub-micromolar concentrations to the mesoscopic aggregates formed by aged micromolar solutions. The critical aggregation concentration of LG18 in water (pH = 8) was found to amount to 4.3 µM, as assessed by the pyrene fluorescence assay. MD simulations showed that the LG18 nanostructures are formed by tetramer building blocks that, at longer times, self-assemble to form micrometric supramolecular architectures.
Assuntos
Diabetes Mellitus Tipo 2 , Simulação de Dinâmica Molecular , Humanos , Idoso , Lipopeptídeos/farmacologia , Liraglutida/farmacologia , Espectrometria de Fluorescência , Diabetes Mellitus Tipo 2/tratamento farmacológicoRESUMO
The quest for biocompatible drug-delivery devices that could be able to open new administration routes is at the frontier of biomedical research. In this contribution, porous polysaccharide-based microsponges based on crosslinked alginate polymers were developed and characterized by optical spectroscopy and nanoscopic microscopy techniques. We show that macropores with a size distribution ranging from 50 to 120 nm enabled efficient loading and delivery of a therapeutic peptide (CIGB814), presently under a phase 3 clinical trial for the treatment of rheumatoid arthritis. Alginate microsponges showed 80% loading capacity and sustained peptide release over a few hours through a diffusional mechanism favored by partial erosion of the polymer scaffold. The edible and biocompatible nature of alginate polymers open promising perspectives for developing a new generation of polysaccharide-based carriers for the controlled delivery of peptide drugs, exploiting alternative routes with respect to intravenous administration.
RESUMO
Structures composed of alternating α and ß amino acids can give rise to peculiar secondary structural motifs, which could self-assemble into complex structures of controlled geometries. This work describes the self-assembly properties of an α,ß-peptide, containing three units of syn H2-(2-F-Phe)-h-PheGly-OH, able to self-organize on surfaces into a fascinating supramolecular rope. This material was characterized by AFM, electronic conduction and fluorescence measurements. Molecular dynamics simulations showed that this hexapeptide can self-assemble into an antiparallel ß-sheet layer, stabilized by intermolecular H-bonds, which, in turn, can self-assemble into many side-by-side layers, due to π-π interactions. As a matter of fact, we demonstrated that in this system, the presence of aromatic residues at the intramolecular interface promoted by the alternation of α,ß-amino-acids in the primary sequence, endorses the formation of a super-secondary structure where the aromatic groups are close to each other, conferring to the system good electron conduction properties. This work demonstrates the capability and future potential of designing and fabricating distinctive nanostructures and efficient bioelectronic interfaces based on an α,ß-peptide, by controlling structure and interaction processes beyond those obtained with α- or ß-peptides alone.
RESUMO
Computational chemistry is a valuable tool, as it allows for in silico prediction of key parameters of novel compounds, such as pKa. In the framework of computational pKa determination, the literature offers several approaches based on different level of theories, functionals and continuum solvation models. However, correction factors are often used to provide reliable models that adequately predict pKa. In this work, an accurate protocol based on a direct approach is proposed for computing phenols pKa. Importantly, this methodology does not require the use of correction factors or mathematical fitting, making it highly practical, easy to use and fast. Above all, DFT calculations performed in the presence two explicit water molecules using CAM-B3LYP functional with 6-311G+dp basis set and a solvation model based on density (SMD) led to accurate pKa values. In particular, calculations performed on a series of 13 differently substituted phenols provided reliable results, with a mean absolute error of 0.3. Furthermore, the model achieves accurate results with -CN and -NO2 substituents, which are usually excluded from computational pKa studies, enabling easy and reliable pKa determination in a wide range of phenols.
Assuntos
Fenóis , Água , Termodinâmica , Água/química , Fenóis/química , Teoria da Densidade FuncionalRESUMO
It is beyond doubt that short peptides hold significant promise in bio-medicine, as the most versatile molecules, both structurally and functionally [...].
Assuntos
Medicina , Peptídeos , Peptídeos/químicaRESUMO
Self-assembly is the most suitable approach to obtaining peptide-based materials on the nano- and mesoscopic scales. Applications span from peptide drugs for personalized therapy to light harvesting and electron conductive media for solar energy production and bioelectronics, respectively. In this study, we will discuss the self-assembly of selected model and bioactive peptides, in particular reviewing our recent work on the formation of peptide architectures of nano- and mesoscopic size in solution and on solid substrates. The hierarchical and cooperative characters of peptide self-assembly will be highlighted, focusing on the structural and dynamical properties of the peptide building blocks and on the nature of the intermolecular interactions driving the aggregation phenomena in a given environment. These results will pave the way for the understanding of the still-debated mechanism of action of an antimicrobial peptide (trichogin GA IV) and the pharmacokinetic properties of a peptide drug (semaglutide) currently in use for the therapy of type-II diabetes.
RESUMO
Synthetic therapeutic peptides (STP) are intensively studied as new-generation drugs, characterized by high purity, biocompatibility, selectivity and stereochemical control. However, most of the studies are focussed on the bioactivity of STP without considering how the formulation actually used for therapy administration could alter the physico-chemical properties of the active principle. The aggregation properties of a 20-mer STP (Ac-His-Ala-Arg-Ile-Lys-D-Pro-Thr-Phe-Arg-Arg-D-Leu-Lys-Trp-Lys-Tyr-Lys-Gly-Lys-Phe-Trp-NH2 ), showing antitumor activity, were investigated by optical spectroscopy and atomic force microscopy imaging, as itself (CIGB552) and in its therapeutic formulation (CIGB552TF). It has found that the therapeutic formulation deeply affects the aggregation properties of the investigated peptide and the morphology of the aggregates formed on mica by deposition of CIGB552 and CIGB552TF millimolar solutions. Molecular dynamics simulations studied the first steps of CIGB552 aggregation under physiological ionic strength conditions (NaCl 150 mM), showing that peptide oligomers, from dimers to tetramers, are preferentially formed in this environment. Interestingly, cell viability assays performed on H-460 cell lines indicate a major antiproliferative activity of the peptide in its therapeutic formulation with respect to the peptide aqueous solution.
Assuntos
Simulação de Dinâmica Molecular , Fragmentos de Peptídeos , Sequência de Aminoácidos , Peptídeos , Análise EspectralRESUMO
An easy and fast method to achieve chiral porphyrin films on glass is herein reported. The on-surface formation of organized supramolecular architectures with distinctive and remarkable chiroptical features strictly depends on the macrocycles used, the solvent chosen for the casting deposition, and most importantly, on the roughness of the glass slide. Dynamic light scattering studies performed on 10-4-10-6 M porphyrin solutions revealed the presence of small porphyrin aggregates, whose size and number increase depending on the initial concentration. Once transferred on surface, these protoaggregates act as nucleation seeds for the following, self-assembling into larger structures upon solvent evaporation, with a process driven by a fine balance between intermolecular and molecule-substrate interactions. The described method represents a straightforward way to fabricate porphyrin-based chiral surfaces onto a transparent and economic substrate in few minutes. The results obtained can be particularly promising for the development of sensors based on stereoselective optical active films, targeting the detection of chiral analytes of practical relevance, such as the so-called emerging pollutants released in the environment from agrochemical, food, and pharmaceutical manufacturing.
RESUMO
External stimuli are potent tools that Nature uses to control protein function and activity. For instance, during viral entry and exit, pH variations are known to trigger large protein conformational changes. In Nature, also the electron transfer (ET) properties of ET proteins are influenced by pH-induced conformational changes. In this work, a pH-controlled, reversible 310 -helix to α-helix conversion (from acidic to highly basic pH values and vice versa) of a peptide supramolecular system built on a gold surface is described. The effect of pH on the ability of the peptide SAM to generate a photocurrent was investigated, with particular focus on the effect of the pH-induced conformational change on photocurrent efficiency. The films were characterized by electrochemical and spectroscopic techniques, and were found to be very stable over time, also in contact with a solution. They were also able to generate current under illumination, with an efficiency that is the highest recorded so far with biomolecular systems.
Assuntos
Concentração de Íons de Hidrogênio , Conformação Molecular , Peptídeos/química , Ouro/química , Conformação ProteicaRESUMO
Supramolecular chirality is one of the most important issues in different branches of science and technology, as stereoselective molecular recognition, catalysis, and sensors. In this paper, we report on the self-assembly of amphiphilic porphyrin derivatives possessing a chiral information on the periphery of the macrocycle (i.e., D- or L-proline moieties), in the presence of chiral amines as co-solute, such as chiral benzylamine derivatives. The aggregation process, steered by hydrophobic effect, has been studied in aqueous solvent mixtures by combined spectroscopic and topographic techniques. The results obtained pointed out a dramatic effect of these ligands on the morphology and on the supramolecular chirality of the final self-assembled structures. Scanning electron microscopy topography, as well as fluorescence microscopy studies revealed the formation of rod-like structures of micrometric size, different from the fractal structures formerly observed when the self-assembly process is carried out in the absence of chiral amine co-solutes. On the other hand, comparative experiments with an achiral porphyrin analogue strongly suggested that the presence of the prolinate moiety is mandatory for the achievement of the observed highly organized suprastructures. The results obtained would be of importance for unraveling the intimate mechanisms operating in the selection of the homochirality, and for the preparation of sensitive materials for the detection of chiral analytes, with tunable stereoselectivity and morphology.
Assuntos
Porfirinas/química , EstereoisomerismoRESUMO
The solvent driven aggregation of porphyrin derivatives, covalently linked to a L- or D-prolinate enantiomer, results in the stereospecific formation of species featuring remarkable supramolecular chirality, as a consequence of reading and amplification of the stereochemical information stored in the proline-appended group. Spectroscopic, kinetic, and topographic SEM studies gave important information on the aggregation processes, and on the structures of the final chiral architectures. The results obtained may be the seeds for the construction of stereoselective sensors aiming at the detection, for example, of novel emergent pollutants from agrochemical, food, and pharmaceutical industry.
RESUMO
An overview of the solvent-driven aggregation of a series of chiral porphyrin derivatives studied by optical methods (UV/Vis, fluorescence, CD and RLS spectroscopies) is herein reported. The investigated porphyrins are characterized by the presence in the meso-positions of glycol-, steroidal- and glucosteroidal moieties, conferring amphiphilicity and solubility in aqueous media to the primarily hydrophobic porphyrin platform. Aggregation of the macrocycles is driven by a change in bulk solvent composition, forming architectures with supramolecular chirality, steered by the stereogenic centers on the porphyrin peripheral positions. The aggregation behavior and chiroptical properties of the final aggregated species strongly depend on the number and stereogenicity of the ancillary groups that dictate the mutual spatial arrangement of the porphyrin chromophores and their further organization in larger structures, usually detectable by different microscopies, such as AFM and SEM. Kinetic studies are fundamental to understand the aggregation mechanism, which is frequently found to be dependent on the substrate concentration. Additionally, Molecular Mechanics calculations can give insights into the intimate nature of the driving forces governing the self-assembly process. The critical use of these combined methods can shed light on the overall self-assembly process of chirally-functionalized macrocycles, with important implications on the development of chiral porphyrin-based materials.
Assuntos
Simulação de Dinâmica Molecular , Porfirinas/química , Açúcares/química , Cinética , Espectrofotometria Ultravioleta , EstereoisomerismoRESUMO
DNA nanodevices have been developed as platforms for the manipulation of gene expression, delivery of molecular payloads, and detection of various molecular targets within cells and in other complex biological settings. Despite efforts to translate DNA nanodevices from the test tube (in vitro) to living cells, their intracellular trafficking and functionality remain poorly understood. Herein, quantitative and super-resolution microscopy approaches were employed to track and visualise, with nanometric resolution, the molecular interactions between a synthetic DNA nanosensor and transcription factors in intracellular compartments. Specifically, fluorescence resonance energy transfer microscopy, fluorescence correlation spectroscopy, fluorescence lifetime imaging microscopy and multicolour single-molecule localisation microscopy were employed to probe the specific binding of the DNA nanosensor to the nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB). We monitored the mobility, subcellular localisation and degradation of the DNA nanosensor inside living prostate cancer PC3 cells. Super-resolution imaging enabled the direct visualisation of the molecular interactions between the synthetic DNA nanosensors and the NF-κB molecules in cells. This study represents a significant advance in the effective detection as well as understanding of the intracellular dynamics of DNA nanosensors in a complex biological milieu.
Assuntos
NF-kappa B , Transdução de Sinais , DNA , Proteínas de Ligação a DNA , Transferência Ressonante de Energia de Fluorescência , Humanos , Masculino , NF-kappa B/genética , NF-kappa B/metabolismoRESUMO
Different polysaccharides-namely dextran, carboxymethyl dextran, alginate, and hyaluronic acid-were compared for the synthesis of nanoporous microsponges particles (NMPs) obtained from a one-pot self-precipitation/cross-linking process. The morphologies and sizes of the NMPs were evaluated comparatively with respect to polymer-to-polymer and cross-linker solvents (water-based vs. DMSO). We found that the radial distribution of the polymer in the near-spherical NMPs was found to peak either at the core or in the corona of the particle, depending both on the specific polymer or the solvent used for the formation of NMPs. The NMP porosity and the swelling capability were evaluated via scanning electron microscopy (SEM). The degradation study indicated that after 10 h incubation with a reducing agent, approximately 80% of the NMPs were disassembled into soluble polysaccharide chains. The adsorption and release capacity of each type of NMP were evaluated using fluorescently labeled bovine serum albumin and lysozyme as model proteins, highlighting a release time typically much longer than the corresponding adsorption time. The dependence of the adsorption-release performance on pH was demonstrated as well. Confocal microscopy images allowed us to probe the different distribution of labeled proteins inside the NMP. The safety and non-cytotoxicity of NMPs were evaluated after incubation with fibroblast 3T3 cells and showed that all types of NMPs did not adversely affect the cell viability for concentrations up to 2.25 µg/mL and an exposure time up to 120 h. Confocal microscopy imaging revealed also the effective interaction between NMPs and fibroblast 3T3 cells. Overall, this study describes a rapid, versatile, and facile approach for preparing a universal non-toxic, nanoporous carrier for protein delivery under physiological conditions.
RESUMO
Three building blocks have been designed to chemically link to a gold surface and vertically self-assemble through thymine-adenine hydrogen bonds. Starting from these building blocks, two different films were engineered on gold surface. Filmâ 1 consists of adenine linked to lipoic acid (Lipo-A) to covalently bind to the gold surface, and ZnTPP linked to a thymine (T-ZnTPP). Filmâ 2 has an additional noncovalently linked layer: a helical undecapeptide analogue of the trichoginâ GAâ IV peptide, in which four glycines were replaced by four lysines to favor a helical conformation and reduce flexibility and the two extremities were functionalized with thymine and adenine to enable Lipo-A and T-ZnTPP binding, respectively. These films were characterized by electrochemical and spectroscopic techniques, and were very stable over time and when in contact with solution. Under illumination, they could generate current with higher efficiency than similar previously described systems.
RESUMO
Recognition of enantiomers is one of the most arduous challenges in chemical sensor development. Although several chiral systems exist, their effective exploitation as the sensitive layer in chemical sensors is hampered by several practical implications that hinder stereoselective recognition in solid state. In this paper, we report a new methodology to efficiently prepare chiral solid films, by using a hybrid material approach where chiral porphyrin derivatives are grafted onto zinc oxide nanoparticles. Circular dichroism (CD) evidences that the solid-state film of the material retains supramolecular chirality due to porphyrin interactions, besides an additional CD feature in correspondence of the absorbance of ZnO (375 nm), suggesting the induction of chirality in the underlying zinc oxide nanoparticles. The capability of hybrid material to detect and recognize vapors of enantiomer pairs was evaluated by fabricating gas sensors based on quartz microbalances. Chiral films of porphyrin on its own were used for comparison. The sensor based on functionalized nanostructures presented a remarkable stereoselectivity in the recognition of limonene enantiomers, whose ability to intercalate in the porphyrin layers makes this terpene an optimal chiral probe. The chiroptical and stereoselective properties of the hybrid material confirm that the use of porphyrin-capped ZnO nanostructures is a viable route for the formation of chiral selective surfaces.
RESUMO
The self-aggregation of inherently chiral, (l)-proline functionalised Cu and Zn porphyrin derivatives has been investigated in different aqueous organic solvent media. The results indicate that the title species form self-assembled structures expressing supramolecular chirality by the amplification of the stereochemical information stored on the l-prolinate functionality. A substantial difference of the aggregation modes, and the chiroptical features of the final supramolecular species for the two investigated complexes, is clearly imputable to the metal ions, having a different coordination ability toward solvent molecules. Detailed kinetic investigation performed by combining different spectroscopy techniques allowed the definition of the reaction mechanisms involved in these processes. The results described are of importance, for example, for the achievement of stereoselective devices and sensors.