Chemical fractionation of particulate-bound metal(loid)s to evaluate their bioavailability, sources and associated cancer risk in India.

Eleven potentially toxic metal(loid)s (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn), proven source markers of mineral based coal-fired industrial emissions and vehicular exhausts, were analysed using the four steps sequential extraction method to evaluate metal(loid)s concentration, in total and fractions of bioavailable and non-bioavailable for fine (PM2.5) and coarse (PM10-2.5) particulate modes. A total of 26-day-wise samples with three replications (total number of samples = 78) were collected in January-December 2019 for each PM10 and PM2.5 at an urban-residential site in India. In both the coarse and fine particulate modes, Pb and Cr have respectively shown the highest and lowest total concentrations of the measured metal(loid)s, indicating the presence of coal-fired power plants and heavy vehicular activities near to study area. In addition, Mn has shown highest bioavailable fraction for both coarse and fine particulate modes. More than 50 % of metal(loid)s concentration, in total to a bioavailable fraction (BAF) were observed in case of As, Cd, Cr, Co, Mn, Ni, and Pb of PM2.5. Mn and Zn have shown similar behaviour in the case of coarse particulate mode. Source apportionment of metal(loid)s bioavailable fractions using positive matrix factorization (PMF 5.0) has found three significant sources: crustal and natural dust (30.04 and 39 %), road traffic (49.57 and 20 %), and industrial emission (20.39 and 41 %) for coarse and fine particulate mode, respectively. Cancer risk through the inhalation pathway was high in total concentration but lower in BAF concentration in both age groups (children and adults).

Household solid fuel burning emission characterization and activity levels in India.

Emission factors (EFs) of PM2.5, carbon fractions, major ionic (K+, Ca2+, NH4+, SO42-, NO3- and Cl-) and elemental (Al, Cr, Cu and Fe) species from combustion of commonly used household solid fuel were determined in 10 different states in India during cooking practices. The study involved sampling during actual household cooking involving use of a variety of fuels including coal balls (CB), fuel wood (FW), dung cakes (DC), crop residues (CR), mixed fuels (MF: dung cakes + fuel woods). Species-wise highest EFs (g·kg-1) were: 34.16 ±â€¯10.1 for PM2.5 (CB), 14.18 ±â€¯5.8 for OC (CB), 2.33 ±â€¯1.4 for EC (DC), 1.03 ±â€¯0.2 for K+ (CR), 2.21 ±â€¯0.6 NH4+ (DC), 0.61 ±â€¯0.2 for NO3- (CB), 0.59 ±â€¯0.1 for SO42- (CB), 0.69 ±â€¯0.1 for Cl- (CR) among the fuels. Higher OC EFs for CB could be attributed to higher moisture content (>13%) in coal-powder that is used to handmade coal balls. It is observed that, in general, OC3 and EC1 were the dominant thermally evolved carbon mass fractions. The study averaged MCE values were in the range 0.93-0.98, which could be attributed to higher variability in flaming and smoldering episodes during the combustion of selected fuels. Sum of ionic EFs for emissions from DC, CR and MF were found to be higher than those observed for FW and CB. The K+/EC and Cl-/EC (~1) ratios could be better indicators of CR fuels to differentiate it from FW, whereas NH4+/EC (~1) is suitable to indicate DC. Average annual emission estimates of PM2.5 (2.00 ±â€¯0.53 Tg·yr-1), OC (0.86 ±â€¯0.23 Tg·yr-1) and EC (0.11 ±â€¯0.02 Tg·yr-1) for tested fuels are evaluated to be contributing 27, 15 and 4% of total PM2.5, OC and EC, respectively, toward annual emission budget from different anthropogenic activities in India.