RESUMO
Electroplating can induce nickel release even from 316L stainless steel, typically considered safe. In this work, the influence of different electroplating processes and surface treatments on nickel release was evaluated. The nickel release was tested according to the EN 1811 standard. The impact of surface roughness on nickel release was assessed by comparing polished and unpolished samples. Results indicate that internal stresses can worsen nickel release, while increasing the thickness of the precious metal layer is beneficial. To corroborate our hypothesis, it was verified that coatings obtained through physical vapor deposition (PVD), without removing the passivation layer of the steel, did not release nickel. For these reasons, we identified the main cause of nickel release as the combined effect of the removal of the passivation layer of stainless steel and the microporosity of the electroplating process.
RESUMO
A water-soluble ruthenium(II) complex (L), capable of producing singlet oxygen (1O2) when irradiated with visible light, was used to modify the surface of an indium-tin oxide (ITO) electrode decorated with a nanostructured layer of TiO2 (TiO2/ITO). Singlet oxygen triggers the appearance of a cathodic photocurrent when the electrode is illuminated and biased at a proper reduction potential value. The L/TiO2/ITO electrode was first characterized with cyclic voltammetry, impedance spectroscopy, NMR, and Raman spectroscopy. The rate constant of singlet oxygen production was evaluated by spectrophotometric measurements. Taking advantage of the oxidative process initiated by 1O2, the analysis of phenolic compounds was accomplished. Particularly, the 1O2-driven oxidation of hydroquinone (HQ) produced quinone moieties, which could be reduced back at the electrode surface, biased at -0.3 V vs Ag/AgCl. Such a light-actuated redox cycle produced a photocurrent dependent on the concentration of HQ in solution, exhibiting a limit of detection (LOD) of 0.3 µmol dm-3. The L/TiO2/ITO platform was also evaluated for the analysis of p-aminophenol, a commonly used reagent in affinity sensing based on alkaline phosphatase.