Studying Gastric Lipase Adsorption Onto Phospholipid Monolayers by Surface Tensiometry, Ellipsometry, and Atomic Force Microscopy.

The access to kinetic parameters of lipolytic enzyme adsorption onto lipids is essential for a better understanding of the overall catalytic process carried out by these interfacial enzymes. Gastric lipase, for instance, shows an apparent optimum activity on triglycerides (TAG) at acidic pH, which is controlled by its pH-dependent adsorption at lipid-water interfaces. Since gastric lipase acts on TAG droplets covered by phospholipids, but does not hydrolyze these lipids, phospholipid monolayers spread at the air-water interfaces can be used as biomimetic interfaces to study lipase adsorption and penetration through the phospholipid layer, independently from the catalytic activity. The adsorption of recombinant dog gastric lipase (rDGL) onto 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) monolayers can be monitored by surface tensiometry at various enzyme concentrations, pHs, and surface pressures (Π). These experimental data and the use of Langmuir adsorption isotherm and Verger-de Haas' lipase kinetics models further allow estimating various parameters including the adsorption equilibrium constant (KAds), the interfacial concentration [Formula: see text] , the molar fraction [Formula: see text] (ΦE*(%), mol%), and the molecular area [Formula: see text] of rDGL adsorbed onto the DLPC monolayer under various conditions. Additional insight into rDGL adsorption/insertion on phospholipid monolayers can be obtained by combining ellipsometry, Langmuir-Blodgett film transfer, and atomic force microscopy. When using multicomponent phospholipid monolayers with phase separation, these techniques allow to visualizing how rDGL preferentially partitions toward liquid expanded phase and at phase boundaries, gets adsorbed at various levels of insertion and impacts on the lateral organization of lipids.

Specific anchoring modes of two distinct dystrophin rod sub-domains interacting in phospholipid Langmuir films studied by atomic force microscopy and PM-IRRAS.

Dystrophin rod repeats 1-3 sub-domain binds to acidic phosphatidylserine in a small vesicle binding assay, while the repeats 20-24 sub-domain does not. In the present work, we studied the adsorption behaviour of both sub-domains at the air/liquid interface and at the air/lipid interface in a Langmuir trough in order to highlight differences in interfacial properties. The adsorption behaviour of the two proteins at the air/liquid interface shows that they display surface activity while maintaining their alpha-helical secondary structure as shown by PM-IRRAS. Strikingly, R20-24 needs to be highly hydrated even at the interface, while this is not the case for R1-3, indicating that the surface activity is dramatically higher for R1-3 than R20-24. Surface-pressure measurements, atomic force microscopy and PM-IRRAS are used in a Langmuir experiment with DOPC-DOPS monolayers at two different surface pressures, 20 mN/m and 30 mN/m. At the lower surface pressure, the proteins are adsorbed at the lipid film interface while maintaining its alpha-helical structure. After an increase of the surface pressure, R1-3 subsequently produces a stable film, while R20-24 induces a reorganization of the lipid film with a subsequent decrease of the surface pressure close to the initial value. AFM and PM-IRRAS show that R1-3 is present in high amounts at the interface, being arranged in clusters representing 3.3% of the surface at low pressure. By contrast, R20-24 is present at the interface in small amounts bound only by a few electrostatic residues to the lipid film while the major part of the molecule remains floating in the sub-phase. Then for R1-3, the electrostatic interaction between the proteins and the film is enhanced by hydrophobic interactions. At higher surface pressure, the number of protein clusters increases and becomes closer in both cases implying the electrostatic character of the binding. These results indicate that even if the repeats exhibit large structural similarities, their interfacial properties are highly contrasted by their differential anchor mode in the membrane. Our work provides strong support for distinct physiological roles for the spectrin-like repeats and may partly explain the effects of therapeutic replacement of dystrophin deficiency by minidystrophins.

Galactosyl headgroup interactions control the molecular packing of wheat lipids in Langmuir films and in hydrated liquid-crystalline mesophases.

The behavior of the two major galactolipids of wheat endosperm, mono- (MGDG) and di-galactosyldiacylglycerol (DGDG) was studied in aqueous dispersion and at the air/liquid interface. The acyl chains of the pure galactolipids and their binary equimolar mixture are in the fluid or liquid expanded phase. SAXS measurements on liquid-crystalline mesophases associated with the electron density reconstructions show that the DGDG adopts a lamellar phase L(alpha) with parallel orientation of the headgroups with respect to the plane of the bilayer, whereas MGDG forms an inverse hexagonal phase H(II) with a specific organization of galactosyl headgroups. The equimolar mixture shows a different behavior from those previously described with formation of an Im3m cubic phase. In comparing monolayers composed of the pure galactolipids and their equimolar mixtures, PM-IRRAS spectra show significant differences in the optical properties and orientation of galactosyl groups with respect to the interface. Furthermore, Raman and FTIR spectroscopies show that the acyl chains of the galactolipid mixture are more ordered compared to those of the pure components. These results suggest strong interactions between MGDG and DGDG galactosyl headgroups and these specific physical properties of galactolipids are discussed in relation to their biological interest in wheat seed.

Organization and orientation of amphiphilic push-pull chromophores deposited in Langmuir-Blodgett monolayers studied by second harmonic generation and atomic force microscopy.

Orientation and organization of two amphiphilic push-pull chromophores mixed with two phospholipids (dipalmitoylphosphatidylcholine and dioleoylphosphatidylcholine) in Langmuir-Blodgett (LB) monolayers are investigated by second harmonic generation. The LB monolayers have also been characterized by atomic force microscopy and UV-vis spectroscopy. The effective molecular orientations and hyperpolarizabilities of the chromophores are studied as a function of the phospholipid concentrations. The experimental results are discussed within the frame of a model of orientational distribution of the chromophores which gives the orientational mean angle and bounds on the orientational disorder. The mean orientation of the chromophores is found to be within 45-55 degrees whereas their hyperpolarizability coefficients, measured with respect to quartz, are estimated to be in the range (0.3-0.7) x 10(-27) esu taking account of the maximal orientational disorder.

Aggregation of puroindoline in phospholipid monolayers spread at the air-liquid interface.

Puroindolines, cationic and cystine-rich low molecular weight lipid binding proteins from wheat seeds, display unique foaming properties and antimicrobial activity. To unravel the mechanism involved in these properties, the interaction of puroindoline-a (PIN-a) with dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) monolayers was studied by coupling Langmuir-Blodgett and imaging techniques. Compression isotherms of PIN-a/phospholipid monolayers and adsorption of PIN-a to lipid monolayers showed that the protein interacted strongly with phospholipids, especially with the anionic DPPG. The electrostatic contribution led to the formation of a highly stable lipoprotein monolayer. Confocal laser scanning microscopy and atomic force microscopy showed that PIN-a was mainly inserted in the liquid-expanded phase of the DPPC, where it formed an aggregated protein network and induced the fusion of liquid-condensed domains. For DPPG, the protein partitioned in both the liquid-expanded and liquid-condensed phases, where it was aggregated. The extent of protein aggregation was related both to the physical state of phospholipids, i.e., condensed or expanded, and to the electrostatic interactions between lipids and PIN-a. Aggregation of PIN-a at air-liquid and lipid interfaces could account for the biological and technological properties of this wheat lipid binding protein.

Lipid-induced pore formation of the Bacillus thuringiensis Cry1Aa insecticidal toxin.

After activation, Bacillus thuringiensis (Bt) insecticidal toxin forms pores in larval midgut epithelial cell membranes, leading to host death. Although the crystal structure of the soluble form of Cry1Aa has been determined, the conformation of the pores and the mechanism of toxin interaction with and insertion into membranes are still not clear. Here we show that Cry1Aa spontaneously inserts into lipid mono- and bilayer membranes of appropriate compositions. Fourier Transform InfraRed spectroscopy (FTIR) indicates that insertion is accompanied by conformational changes characterized mainly by an unfolding of the beta-sheet domains. Moreover, Atomic Force Microscopy (AFM) imaging strongly suggests that the pores are composed of four subunits surrounding a 1.5 nm diameter central depression.

In situ imaging of detergent-resistant membranes by atomic force microscopy.

Purified detergent-resistant membranes (DRMs) are powerful tools for the biochemical study of plasma membrane domains. To what extent these isolated DRMs correspond to native membrane domains remains, however, a matter of debate. The most immediate question to be answered concerns the in situ size range of DRMs, a determination that escapes classical microscopy techniques. In this study we show that in situ three-dimensional images of a material as fragile as Triton X-100-treated cells can be obtained, in buffer, by tapping mode atomic force microscopy. These images establish that, prior to the isolation procedure, the detergent plasma membrane fragments form domains whose size frequently exceeds 15-20 microm(2). This DRMs size range is about 1 order of magnitude higher than that estimated for the larger microdomains of living cells, which strongly suggests that membrane microdomains rearrange into larger DRMs during Triton X-100 treatment. Concomitantly, the images also reveal the presence of the cytoskeleton, which is resistant to detergent extraction, and suggest that, in situ, DRMs are associated with the membrane cytoskeleton.

Tapping-mode atomic force microscopy on intact cells: optimal adjustment of tapping conditions by using the deflection signal.

Difficulties in the proper adjustment of the scanning parameters are often encountered when using tapping-mode atomic force microscopy (TMAFM) for imaging thick and soft material, and particularly living cells, in aqueous buffer. A simple procedure that drastically enhances the successful imaging of the surface of intact cells by TMAFM is described. It is based on the observation, in liquid, of a deflection signal, concomitant with the damping of the amplitude that can be followed by amplitude-distance curves. For intact cells, the evolution of the deflection signal, steeper than the amplitude damping allows a precise adjustment of the feedback value. Besides its use in finding the appropriate tapping conditions, the deflection signal provides images of living cells that essentially reveal the organization of the membrane cytoskeleton. This allows to show that changes in the membrane surface topography are associated with a reorganization of the membrane skeleton. Studies on the relationships between the cell surface topography and membrane skeleton organization in living cells open a new field of applications for the atomic force microscope.

Detection of peptide-lipid interactions in mixed monolayers, using isotherms, atomic force microscopy, and fourier transform infrared analyses.

To improve the understanding of the membrane uptake of an amphipathic and positively charged vector peptide, we studied the interactions of this peptide with different phospholipids, the nature of whose polar headgroups and physical states were varied. Three lipids were considered: dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG), and dioleoylphosphatidylglycerol (DOPG). The approach was carried out by three complementary methods: compression isotherms of monolayers and atomic force microscopy observations associated with Fourier transform infrared investigations. From analysis of the compression isotherms, it was concluded that the peptide interacts with all lipids and with an expansion of the mean molecular area, implying that both components form nonideal mixtures. The expansion was larger in the case of DOPG than for DPPC and DPPG because of an alpha to beta conformational transition with an increase in the peptide molar fraction. Atomic force microscopy observations showed that the presence of small amounts of peptide led to the appearance of bowl-like particles and that an increase in the peptide amounts generated the formation of filaments. In the case of DOPG, filaments were found at higher peptide molar fractions than already observed for DOPC because of the presence of negatively charged lipid headgroups.

Lipid-induced organization of a primary amphipathic peptide: a coupled AFM-monolayer study.

To better understand the nature of the mechanism involved in the membrane uptake of a vector peptide, the interactions between dioleoylphosphatidylcholine and a primary amphipathic peptide containing a signal peptide associated with a nuclear localization sequence have been studied by isotherms analysis of mixed monolayers spread at the air-water interface. The peptide and the lipid interact through strong hydrophobic interactions with expansion of the mean molecular area that resulted from a lipid-induced modification of the organization of the peptide at the interface. In addition, a phase separation occurs for peptide molar fraction ranging from about 0.08 to 0.4 Atomic force microscopy observations made on transferred monolayers confirm the existence of phase separation and further reveal that mixed lipid-peptide particles are formed, the size and shape of which depend on the peptide molar fraction. At low peptide contents, round-shaped particles are observed and an increase of the peptide amount, simultaneously to the lipidic phase separation, induces morphological changes from bowls to filamentous particles. Fourier transform infrared spectra (FTIR) obtained on transferred monolayers indicate that the peptide adopts a beta-like structure for high peptide molar fractions. Such an approach involving complementary methods allows us to conclude that the lipid and the peptide have a nonideal miscibility and form mixed particles which phase separate.

Imaging of the surface of living cells by low-force contact-mode atomic force microscopy.

The membrane surface of living CV-1 kidney cells in culture was imaged by contact-mode atomic force microscopy using scanning forces in the piconewton range. A simple procedure was developed for imaging of the cell surface with forces as low as 20-50 pN, i.e., two orders of magnitude below those commonly used for cell imaging. Under these conditions, the indentation of the cells by the tip could be reduced to less than l0 nm, even at the cell center, which gave access to the topographic image of the cell surface. This surface appeared heterogeneous with very few villosities and revealed, only in distinct areas, the submembrane cytoskeleton. At intermediate magnifications, corresponding to 20-5 microm scan sizes, the surface topography likely reflected the organization of submembrane and intracellular structures on which the plasma membrane lay. By decreasing the scan size, a lateral resolution better than 20 nm was routinely obtained for the cell surface, and a lateral resolution better than 10 nm was obtained occasionally. The cell surface appeared granular, with packed particles, likely corresponding to proteins or protein-lipid complexes, between approximately 5 and 30 nm xy size.

Atomic force microscopy of renal cells: limits and prospects.

In this brief review, we present three-dimensional images of living Madin-Darby canine kidney (MDCK) cells and CV-1 cells that illustrate the possibilities and limits in the use of atomic force microscopy (AFM) for studying the topography of the cell surfaces and of isolated biological membranes. We show that microvilli can be imaged at the surface of living epithelial cells. However, when these microvilli are abundant and close to each other, the geometry of the AFM tip only allows an access to the upper part of the structures and precludes nanometer range imaging of the cell surface. Such a nanometer range imaging was obtained with other cell types like CV-1 cells and with isolated biological membranes. It reveals that protruding particles 5 to 60 nm xy size, likely corresponding to membranes proteins, occupy most of the membrane surface. These images indicate that the AFM already gives an access to the cell surface structure at the mesoscopic scale, which constitutes a major step for the understanding of the structure-function relationships in membranes. Perspectives for a further step, the imaging at molecular resolution of membranes, are discussed.

Cell kinetics in the fetal mouse thymus: precursor cell input, proliferation, and emigration.

The entry and differentiation of lymphoid precursor cells (LPC) in grafted mouse fetal thymuses and the emigration of explants thymocytes has been followed in a system in which donor and host lymphocytes could be distinguished on the basis of Thy-1 expression. It appears that LPC that invade the fetal mouse thymus between 10 and 13 days rapidly differentiate into Thy-1 positive thymocytes, giving rise to all of the lymphoid populations of both cortical and medullary locations until approximately the end of the first week after birth. Lymphoid precursor cells that enter the fetal thymus after 13 days of fetal life only differentiate into Thy-1 positive lymphocytes 6 or 7 days after birth, when they give rise to a second generation of thymocytes that grows exponentially and completely replaces the first generation in approximately 8 days. All cells leaving the thymus during the first 2 wk of life appear to be derived from the first wave of precursors.