Total Knee Arthroplasty Kinematics Predict Patient-Reported Outcome Measures: Implications for Clinical Kinematic Examinations.

BACKGROUND: A core tenet of total knee arthroplasty (TKA) is that achieving more natural kinematics will lead to superior patient outcomes. Yet this relationship has not been proven for large representative cohorts of TKA patients because accurately measuring 3-dimensional TKA kinematics is time-consuming and expensive. But advanced imaging systems and machine learning-enhanced analysis software will soon make it practical to measure knee kinematics preoperatively and postoperatively in the clinic using radiographic methods. The purpose of this study was to assess the reported relationships between TKA kinematics and outcomes and distill those findings into a proposal for a clinically practical protocol for a clinical kinematic exam. METHODS: This study reviewed the recent literature relating TKA kinematics to patient outcomes. There were 10 studies that reported statistical associations between TKA kinematics and patient outcome scores utilizing a range of functional activities. We stratified these activities by the complexity of the radiographic examination to create a proposed examination protocol, and we generated a list of requirements and characteristics for a practical TKA clinical kinematic examination. RESULTS: Given considerations for a clinically practical kinematic exam, including equipment, time and other resources, we propose 3 exam levels. With basic radiographs, we suggest studying single-leg stance in extension, lunge or squat, and kneeling. For fluoroscopic systems with X-ray pulses up to 20 ms, we propose chair-rise or stair ascent to provide additional dynamic information. For fluoroscopic systems with X-ray pulses of less than 10 ms, we propose rapid open-chain knee flexion-extension to simulate the highly dynamic swing phase of gait. CONCLUSIONS: It is our hope that this proposed examination protocol spurs discussion and debate so that there can be a consensus approach to clinical examination of knee and TKA kinematics when the rapidly advancing hardware and software capabilities are in place to do so.

The use of virtual reality to assess the bony landmarks at the knee joint - The role of imaging modality and the assessor's experience.

BACKGROUND: At present, extended reality technologies such as virtual reality (VR) have gained popularity in orthopedic surgery. The first aim of this study was to assess the precision of VR and other imaging modalities - computed tomography (CT), magnetic resonance imaging (MRI) - to localize bony landmarks near the knee joint. Secondly, the impact of the educational level of the assessor - medical master students, orthopedic residents, and orthopedic surgeons - on the precision with which landmarks near the knee joint could be localized was analyzed. METHODS: We included a total of 77 participants: 62 medical master students, 10 orthopedic residents, and 5 orthopedic surgeons to analyze three cadaver legs. Every participant localized a series of sixteen bony landmarks on six different imaging modalities (CT, MRI, 3D-CT, 3D-MRI, VR-CT, VR-MRI). RESULTS: Concerning the imaging modality, the inter- and intra-observer variability were lowest for 3D and VR, higher for MRI (respectively 7.6 mm and 6.9 mm), and highest for CT (respectively 9 mm and 8.7 m).Concerning the educational level of the assessor, inter- and intra-observer variability in VR were lowest for surgeons, (respectively 3.2 mm and 3.6 mm), higher for residents (respectively 5.9 mm and 6.5 mm) and medical students (respectively 5.9 mm and 5.8 mm). CONCLUSIONS: VR can be considered a reliable imaging technique. Localization of landmarks tends to be more precise in VR and on 3D than on conventional CT and MRI images. Furthermore, orthopedic surgeons localize landmarks more precisely than orthopedic residents and medical students in VR.

Osteotomies around the knee alter alignment of the ankle and hindfoot: a systematic review of biomechanical and clinical studies.

Purpose: Emerging reports suggest an important involvement of the ankle/hindfoot alignment in the outcome of knee osteotomy; however, a comprehensive overview is currently not available. Therefore, we systematically reviewed all studies investigating biomechanical and clinical outcomes related to the ankle/hindfoot following knee osteotomies. Methods: A systematic literature search was conducted on PubMed, Web of Science, EMBASE and Cochrane Library according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and registered on international prospective register of systematic reviews (PROSPERO) (CRD42021277189). Combining knee osteotomy and ankle/hindfoot alignment, all biomechanical and clinical studies were included. Studies investigating knee osteotomy in conjunction with total knee arthroplasty and case reports were excluded. The QUality Appraisal for Cadaveric Studies (QUACS) scale and Methodological Index for Non-Randomized Studies (MINORS) scores were used for quality assessment. Results: Out of 3554 hits, 18 studies were confirmed eligible, including 770 subjects. The minority of studies (n = 3) assessed both high tibial- and distal femoral osteotomy. Following knee osteotomy, the mean tibiotalar contact pressure decreased (n = 4) except in the presence of a rigid subtalar joint (n = 1) or a talar tilt deformity (n = 1). Patient symptoms and/or radiographic alignment at the level of the ankle/hindfoot improved after knee osteotomy (n = 13). However, factors interfering with an optimal outcome were a small preoperative lateral distal tibia angle, a small hip-knee-ankle axis (HKA) angle, a large HKA correction (>14.5°) and a preexistent hindfoot deformity (>15.9°). Conclusions: Osteotomies to correct knee deformity alter biomechanical and clinical outcomes at the level of the ankle/hindfoot. In general, these changes were beneficial, but several parameters were identified in association with deterioration of ankle/hindfoot symptoms following knee osteotomy.

Condylar constrained and rotating hinged implants in revision knee arthroplasty show similar survivorship and clinical outcome: a systematic review and meta-analysis.

PURPOSE: In revision total knee arthroplasty (TKA) ligament instability and bone defects might require more constraint implants such as a condylar constrained knee (CCK) or rotating hinged knee (RHK). When both implants are suitable, the choice remains controversial. The purpose of this systematic review and meta-analysis was to compare the survivorship and clinical outcome between CCK and RHK in revision TKA. METHODS: Systematic literature research was performed. Studies analysing the clinical outcome and/or survivorship of CCK and/or RHK in revision TKA were included. Clinical outcomes included the Knee Society Score, both clinical (KSCS) and functional (KSFS), range of motion (ROM) and reoperations. Survival was defined as the time free from removal or revision of the femoral and/or tibial component. RESULTS: A total of 40 articles analysing 4.555 knees were included. Survival did not differ between RHK and CCK implants (p = 0.6058), with, respectively, 91.6% and 89.8% survival after 5 years. Postoperative KSCS and KSFS were, respectively, 79.2 (SD 10.7) and 61.1 (SD 21.8) for the CCK group. Similar scores were noted for the RHK group with a KSCS of 80.2 (SD 14.1) and KSFS of 58.5 (SD 17.3). Postoperative ROM was similar for CCK (105.3°, SD 17.1°) and RHK patients (104.1°, SD 16.9°). CONCLUSION: This meta-analysis revealed that both survivorship and clinical outcome are similar for CCK and RHK patients for whom both designs are technically suitable and indicated. LEVEL OF EVIDENCE: IV.

Implementing automated 3D measurements to quantify reference values and side-to-side differences in the ankle syndesmosis.

Detection of syndesmotic ankle instability remains challenging in clinical practice due to the limitations of two-dimensional (2D) measurements. The transition to automated three-dimensional (3D) measurement techniques is on the verge of a breakthrough but normative and side-to-side comparative data are missing. Therefore, our study aim was two-fold: (1) to establish 3D anatomical reference values of the ankle syndesmosis based on automated measurements and (2) to determine to what extent the ankle syndesmosis is symmetric across all 3D measurements. Patients without syndesmotic pathology with a non-weight-bearing CT scan (NWBCT; N = 38; Age = 51.6 ± 17.43 years) and weight-bearing CT scan (WBCT; N = 43; Age = 48.9 ± 14.3 years) were retrospectively included. After training and validation of a neural network to automate the segmentation of 3D ankle models, an iterative closest point registration was performed to superimpose the left on the right ankle. Subsequently, 3D measurements were manually and automatically computed using a custom-made algorithm and side-to-side comparison of these landmarks allowed one to investigate symmetry. Intra-observer analysis showed excellent agreements for all manual measurements (ICC range 0.85-0.99) and good (i.e. < 2.7° for the angles and < 0.5 mm for the distances) accuracy was found between the automated and manual measurements. A mean Dice coefficient of 0.99 was found for the automated segmentation framework. The established mean, standard deviation and range were provided for each 3D measurement. From these data, reference values were derived to differ physiological from pathological syndesmotic alignment. Furthermore, side-to-side symmetry was revealed when comparing left to right measurements (P > 0.05). In clinical practice, our novel algorithm could surmount the current limitations of manual 2D measurements and distinguish patients with a syndesmotic ankle lesion from normal variance.

Knee kinematics during staircase descent.

The goal was to evaluate tibiofemoral knee joint kinematics during stair descent, by simulating the full stair descent motion in vitro. The knee joint kinematics were evaluated for two types of knee implants: bi-cruciate retaining and bi-cruciate stabilized. It was hypothesized that the bi-cruciate retaining implant better approximates native kinematics. The in vitro study included 20 specimens which were tested during a full stair descent with physiological muscle forces in a dynamic knee rig. Laxity envelopes were measured by applying external loading conditions in varus/valgus and internal/external direction. The laxity results show that both implants are capable of mimicking the native internal/external-laxity during the controlled lowering phase. The kinematic results show that the bi-cruciate retaining implant tends to approximate the native condition better compared to bi-cruciate stabilized implant. This is valid for the internal/external rotation and the anteroposterior translation during all phases of the stair descent, and for the compression-distraction of the knee joint during swing and controlled lowering phase. The results show a better approximation of the native kinematics by the bi-cruciate retaining knee implant compared to the bi-cruciate stabilized knee implant for internal/external rotation and anteroposterior translation. Whether this will result in better patient outcomes remains to be investigated.

Implantable Shock Absorber Provides Superior Pain Relief and Functional Improvement Compared With High Tibial Osteotomy in Patients with Mild-to-Moderate Medial Knee Osteoarthritis: A 2-Year Report.

OBJECTIVE: Up to 10 million Americans below the age of 65 years have symptomatic knee osteoarthritis (OA) and may not yet be candidates for arthroplasty. In response, a subcutaneous implantable shock absorber (ISA) that unloads the knee has been developed. The safety and effectiveness of ISA treatment were compared against a surgical unloading control, high tibial osteotomy (HTO). DESIGN: This was a prospective open-label cohort study with a historical control arm. Subjects underwent ISA placement or HTO. The primary endpoint was a composite variable combining pain, function, specific adverse events, integrity of implant or hardware, and conversion to subsequent surgery. Pain and function outcomes (Western Ontario and McMaster Universities Arthritis Index scores) were assessed through 24 months. Adverse events were tracked. RESULTS: The primary endpoint demonstrated superiority of the ISA arm versus the HTO arm, with 85.6% of ISA subjects meeting all criteria compared with 65.5% of HTO subjects. In addition, all 5 secondary endpoints showed superiority of ISA over HTO. At 24 months, the proportions of subjects considered responders were 95.8% (ISA) versus 87.9% (HTO) for pain and 91.7% (ISA) versus 81.3% (HTO) for function. The ISA procedure was well tolerated, with 13.4 days to full weightbearing status versus 58.0 days for the HTO arm. CONCLUSIONS: Treatment with an ISA demonstrated noninferiority and superiority versus treatment with HTO in subjects aged 25-65 years who had OA of the medial knee. Treatment with ISA has high clinical benefit and is durable through at least 24 months.

The language of knee alignment : updated definitions and considerations for reporting outcomes in total knee arthroplasty.

Orthopaedic surgeons are currently faced with an overwhelming number of choices surrounding total knee arthroplasty (TKA), not only with the latest technologies and prostheses, but also fundamental decisions on alignment philosophies. From 'mechanical' to 'adjusted mechanical' to 'restricted kinematic' to 'unrestricted kinematic' - and how constitutional alignment relates to these - there is potential for ambiguity when thinking about and discussing such concepts. This annotation summarizes the various alignment strategies currently employed in TKA. It provides a clear framework and consistent language that will assist surgeons to compare confidently and contrast the concepts, while also discussing the latest opinions about alignment in TKA. Finally, it provides suggestions for applying consistent nomenclature to future research, especially as we explore the implications of 3D alignment patterns on patient outcomes.Cite this article: Bone Joint J 2023;105-B(2):102-108.

Balancing the flexion gap first in total knee arthroplasty leads to better preservation of posterior condylar offset resulting in better knee flexion.

PURPOSE: The purpose of this study is to determine whether the flexion first balancing technique, developed in an attempt to solve the dissatisfaction due to instability in total knee arthroplasties, leads to better restoration of joint line height and medial posterior condylar offset. This might result in better knee flexion, compared to the classic extension first gap balancing technique. The secondary objective is to show non-inferiority of the flexion first balancing technique in terms of clinical outcomes as measured by the Patient Reported Outcome Measurements. METHODS: A cohort of 40 patients (46 knee replacements) operated using the flexion first balancing technique was retrospectively analyzed and compared with a cohort of 51 patients (52 knee replacements) operated using the classic gap balancing technique. Radiographic analysis of the coronal alignment, joint line height and posterior condylar offset was performed. Clinical and functional outcome data were analyzed pre- and postoperatively and compared between both groups. The two sample t test, Mann-Whitney U test, Chi-square test and a linear mixed model were used for performing statistical analyses, after normality analyses were executed. RESULTS: Radiologic evaluation showed a decrease in posterior condylar offset using the classic gap balancing technique (p = 0.040) versus no change using the flexion first balancing technique (p = n.s.). No statistically significant differences were noted for joint line height and coronal alignment. Using the flexion first balancer technique leads to a greater postoperative range of motion with deeper flexion (p = 0.002) and a better Knee injury and Osteoarthritis Outcome Score (KOOS) (p = 0.025). CONCLUSION: The Flexion First Balancing technique is a valid and safe technique for TKA, resulting in better preservation of PCO with consequently greater postoperative flexion and better KOOS scores. LEVEL OF EVIDENCE: III.

The Definition of the Tibial Sagittal Plane and the Paradox of Imageless Navigation and Robotics: A Cadaveric Study.

BACKGROUND: The accuracy, precision, and repeatability by which the tibial sagittal plane can be found with imageless technology is currently unknown. The purpose of this study was to identify any differences between imageless and image-based technology to define the sagittal plane of the tibia. METHODS: A computed tomography (CT) was obtained of 18 cadavers with the knee fully extended. The surgical trans-epicondylar axis and several tibial rotation references were acquired on the CT scan. After a medial parapatellar approach, the same anatomical landmarks were acquired in vivo. In the horizontal plane, the angle between the surgical trans-epicondylar axis and the tibial rotational axes was assessed. RESULTS: Highest accuracy was found for posterior cruciate ligament (PCL)-anterior cruciate ligament (ACL, -1.48°, standard deviation [SD] 13.64; imageless), tibial medial condyle (TMC)-tibial lateral condyle (TLC, 1.72°, SD 4.24; image-based), the ACL-medial border of tibial tuberosity (MTT, -2.89°, SD 18.86; image-based). Highest precision was acquired with image-based technology: TMC-TLC (SD 4.24), PCL-ACL (SD 5.86), and PCL-medial third of tibial tuberosity (M3TT, SD 7.10). Excellent intraobserver and interobserver correlation coefficients were observed with image-based technology: PCL-MTT, anterior medial condyle (AMC)-anterior lateral condyle (ALC), and TMC-TLC (Intraobserver and interobserver correlation coefficients 0.90-0.98). CONCLUSION: The tibial sagittal plane could be defined with highest accuracy, precision, and repeatability on a preoperative CT. Imageless methodology lacked the precision and repeatability of image-based technology. With the current pursuit of high accuracy and precision in total knee arthroplasty, the reference frame used to quantify implant position should be highly accurate and precise as well. LEVEL OF EVIDENCE: IV, Case Series.

Intratendinous pressure changes in the Achilles tendon during stretching and eccentric loading: Implications for Achilles tendinopathy.

Mechanical overload is considered the main cause of Achilles tendinopathy. In addition to tensile loads, it is believed that the Achilles tendon may also be exposed to compressive loads. However, data on intratendinous pressures are lacking, and consequently, their role in the pathophysiology of tendinopathy is still under debate. Therefore, we aimed to evaluate the intratendinous pressure changes in the Achilles tendon during stretching and eccentric loading. Twelve pairs of human cadaveric legs were mounted in a testing rig, and a miniature pressure catheter was placed through ultrasound-guided insertion in four different regions of the Achilles tendon: the insertion (superficial and deep layers), mid-portion, and proximal portion. Intratendinous pressure was measured during three simulated loading conditions: a bent-knee calf stretch, a straight-knee calf stretch, and an eccentric heel-drop. It was found that the intratendinous pressure increased exponentially in both the insertion and mid-portion regions of the Achilles tendon during each loading condition (p < 0.001). The highest pressures were consistently found in the deep insertion region (p < 0.001) and during the eccentric heel-drop (p < 0.001). Pressures in the mid-portion were also significantly higher than in the proximal portion (p < 0.001). These observations offer novel insights and support a role for compression in the pathophysiology of Achilles tendinopathy by demonstrating high intratendinous pressures at regions where Achilles tendinopathy typically occurs. To what extent managing intratendinous pressure might be successful in patients with Achilles tendinopathy by, for example, avoiding excessive stretching, modifying exercise therapy, and offering heel lifts requires further investigation.

Effect of iliotibial band and gastrocnemius activation on knee kinematics.

BACKGROUND: This paper aimed to evaluate the effects of iliotibial band (ITB) activation and gastrocnemius activation on knee kinematics and stability. A quantitative analysis needs to determine the effect of ITB and gastrocnemius activation in each of the six degrees of freedom of the knee joint. METHODS: Four cadaveric knee specimens were tested during squat motions with physiological loads. The quadriceps and hamstring muscles were activated in each situation. The ITB was intermittently activated using an actuator and a cable pulley system. The gastrocnemius was activated anatomically as part of the triceps surae complex together with the soleus and the plantaris muscle. During the squat motion, the Achilles tendon has increased tension which induced muscle activation in the calf muscles thus creating the activated situation. RESULTS: Introduction of the ITB resulted in a reduced laxity width during extension and an external tibial rotation (2.4°). The femur shifted less posterior in the lateral compartment when the ITB was activated. Activation of gastrocnemius as part of the calf muscles led to an increased laxity width. CONCLUSIONS: Knee stability and knee joint kinematics are affected significantly by the activation of the ITB and the gastrocnemius as part of the triceps surae complex. This points to the importance of muscles and stabilizing tissue structures such as the ITB in the evaluation of knee joint kinematics both in vitro and in vivo.

The learning curve of imageless robot-assisted total knee arthroplasty with standardised laxity testing requires the completion of nine cases, but does not reach time neutrality compared to conventional surgery.

PURPOSE: The assistance of robot technology is introduced into the operating theatre to improve the precision of a total knee arthroplasty. However, as with all new technology, new technology requires a learning curve to reach adequate proficiency. The primary aim of this study was to identify the learning curve of an imageless robotic system with standardised laxity testing. The secondary aim of this study was to evaluate the accuracy of the intra-operative coronal alignment during the learning curve. METHODS: A prospective study was performed on 30 patients undergoing robot-assisted total knee arthroplasty with an imageless robotic system (Corin, Massachusetts, USA) associated with a dedicated standardised laxity testing device. The learning curve of all surgical steps was assessed with intra-operative video monitoring. As comparison, the total surgical time of the last 30 patients receiving conventional total knee arthroplasty by the same surgeon and with the same implant was retrospectively assessed. Coronal lower limb alignment was evaluated pre- and post-operatively on standing full-leg radiographs. RESULTS: CUSUM (cumulative summation) analysis has shown inflexion points in multiple steps associated with robot-assisted surgery between one and 16 cases, which indicates the progression from the learning phase to the proficiency phase. The inflexion point for total operative time occurred after nine cases. Robot-assisted total knee surgery required significantly longer operative times than the conventional counterpart, with an average increase of 22 min. Post-operative limb and implant alignment was not influenced by a learning curve. CONCLUSION: The introduction of an imageless robotic system with standardised laxity assessment for total knee arthroplasty results in a learning curve of nine cases based on operative time. Compared to conventional surgery, the surgeon is not able to reach time neutrality with the robotic platform. There is no learning curve associated with coronal limb or implant alignment. This study enables orthopaedic surgeons to understand the implementation of this surgical system and its specific workflow into clinical practice.

Accuracy of intraoperative bone registration and stereotactic boundary reconstruction during total knee arthroplasty surgery.

BACKGROUND: The intraoperative registration of the bones play a crucial role in image-based computer-assisted knee arthroplasty to achieve accurate implant placement and to create reliable stereotactic bone boundaries for robot-assisted surgical systems. METHOD: This study assessed the intraoperative registration accuracy on six intact fresh frozen cadavers. RESULTS: Rotational errors around the mechanical axis were the largest, with a standard deviation of 1.2° and outliers up to 3.7°. The mean translational errors were lower than 1 mm, with outliers up to 1.5 mm. These errors were amplified to 2 mm for the registration-based reconstruction of the posterior bone surface at the resection levels. CONCLUSION: Given the cumulative behaviour of surgical errors, registration errors can affect the final implant positioning. Furthermore, inaccuracies in the reconstructed bone boundary directly affect the virtual stereotactic boundaries used in robotic-assisted surgery and can result in an incomplete resection or inadvertent soft tissue damage.

Does the Foot and Ankle Alignment Impact the Patellofemoral Pain Syndrome? A Systematic Review and Meta-Analysis.

BACKGROUND: A convincing association between the foot and ankle alignment (FAA) and patellofemoral pain syndrome (PFPS) remains debatable in the literature. Therefore, all studies investigating the role of FAA in patients with PFPS were systematically reviewed. METHODS: A systematic literature search was performed on the databases PubMed, Embase, Cochrane Library, and Web of Science. Inclusion criteria were all studies investigating static and/or dynamic FAA factors and PFPS. Studies with less than 20 patients or with patellofemoral osteoarthritis were excluded. The quality assessment was based on Cochrane study criteria, and the maximum score was set at eight. RESULTS: Of 2246 articles, only 13 case-control studies were eligible. Considering static FAA factors, two studies found an association with rearfoot eversion and one with rearfoot inversion. While examining dynamic FAA characteristics, one study found an association with rearfoot eversion range of motion and three with gait kinematics. No further associations were reported. The quality assessment mean score was 5.5 (SD = 0.97) corresponding to moderate quality. CONCLUSIONS: In contrast to our expectations, a limited number of studies were founded supporting an association between FAA and PFPS. At present, the quality of the literature is still poor and conflicting, thus the need for further studies to determine any association between FAA and PFPS.

Comparison of Different Strategies in Revision Arthroplasty of the Knee with Severe Bone Loss: A Systematic Review and Meta-Analysis of Clinical Outcomes.

BACKGROUND: In revision total knee arthroplasty large bone lesions can jeopardize correct implant orientation and fixation. Different strategies have been proposed to tackle this issue. The purpose of this review and meta-analysis is to evaluate the midterm clinical and survivorship results of porous cones and porous-coated sleeves compared to morselized and structural grafts. METHODS: We performed a systematic review of the literature on the different strategies targeting moderate to large metaphyseal bone defects. The literature was evaluated for methodological quality. We analyzed results on survivorship using logistic regression correcting for follow-up time and number of knees. We compared these results using forest plots for early and midterm follow-up. Clinical outcome was evaluated by comparing standardized mean difference of patient-related outcome measures. RESULTS: A total of 77 articles analyzing 4,391 knees were included. The logistic regression curve showed a nonsignificant odds ratio (OR) at 10 years of 0.91 (95% confidence interval [CI] 0.699-1.192, P = .49) for failure comparing all porous implants with all grafting procedures. The available clinical reports show a bigger standardized mean difference increase for tantalum cones (OR 3.04, 95% CI 1.71-4.37) than for porous sleeves (OR 1.72, 95% CI 0.88-2.57). CONCLUSION: Our analysis shows that the size and quality of the literature on metaphyseal bone defects is progressively improving. Porous implants are effective in tackling metaphyseal bone defects showing good survivorship outcome at midterm follow-up. In younger patients with less constrained prosthetic implants, surgeons might still consider the use of grafts without risking worse outcomes.

Statistical shape model-based tibiofibular assessment of syndesmotic ankle lesions using weight-bearing CT.

Forced external rotation is hypothesized as the key mechanism of syndesmotic ankle injuries, inducing a three-dimensional deviation from the normal distal tibiofibular joint (DTFJ) alignment. However, current diagnostic imaging modalities are impeded by a two-dimensional assessment, without considering ligamentous stabilizers. Therefore, our aim is threefold: (1) to construct an articulated statistical shape model of the normal DTFJ with the inclusion of ligamentous morphometry, (2) to investigate the effect of weight-bearing on the DTFJ alignment, and (3) to detect differences in predicted syndesmotic ligament length of patients with syndesmotic lesions with respect to normative data. Training data comprised non-weight-bearing CT scans from asymptomatic controls (N = 76), weight-bearing CT scans from patients with syndesmotic ankle injury (N = 13), and their weight-bearing healthy contralateral side (N = 13). Path and length of the syndesmotic ligaments were predicted using a discrete element model, wrapped around bony contours. Statistical shape model evaluation was based on accuracy, generalization, and compactness. The predicted ligament length in patients with syndesmotic lesions was compared with healthy controls. With respect to the first aim, our presented skeletal shape model described the training data with an accuracy of 0.23 ± 0.028 mm. Mean prediction accuracy of ligament insertions was 0.53 ± 0.12 mm. In accordance with the second aim, our results showed an increased tibiofibular diastasis in healthy ankles after weight-bearing. Concerning our third aim, a statistically significant difference in anterior syndesmotic ligament length was found between ankles with syndesmotic lesions and healthy controls (p = 0.017). There was a significant correlation between the presence of syndesmotic injury and the positional alignment between the distal tibia and fibula (r = 0.873, p < 0,001). Clinical Significance: Statistical shape modeling combined with patient-specific ligament wrapping techniques can facilitate the diagnostic workup of syndesmosic ankle lesions under weight-bearing conditions. In doing so, an increased anterior tibiofibular distance was detected, corresponding to an "anterior open-book injury" of the ankle syndesmosis as a result of anterior inferior tibiofibular ligament elongation/rupture.

The contralateral limb is no reliable reference to restore coronal alignment in TKA.

PURPOSE: Implementation of morphometric reference data from the contralateral, unaffected lower limb is suggested when reconstructing the coronal plane alignment in TKA. Limited information, however, is available which confirms this left-to-right symmetry in coronal alignment based upon radiographs. The purpose of the study was, therefore, (1) to verify if a left-to-right symmetry is present and (2) to assess whether the contralateral lower limb would be a reliable reference for reconstructing the frontal plane alignment. METHODS: Full-leg standing radiographs of 250 volunteers (male, 125; female,125) were reviewed for three alignment parameters (Hip-Knee-Ankle angle (HKA), Femoral Mechanical Angle (FMA) and Tibial Mechanical Angle (TMA)). Evaluation of assumed left-to-right symmetry was performed according to two coronal alignment classifications (HKA subdivisions (HKA) and limb, femoral and tibial phenotypes (HKA, FMA and TMA)). Inter- and within-subject variability was calculated, along with correlations coefficients (r) and coefficients of determination (r2). Reliability of the contralateral limb as a personalized reference to reconstruct the constitutional alignment was investigated by intervals, expanding by 1° increments (0.5° increment both to varus and valgus) around the right knee alignment parameters. Subsequently, it was verified whether or not the left knee parameters fell within this interval. RESULTS: Symmetrical distribution in coronal alignment was found in 79% (HKA subdivision) and 59% (limb phenotype) of the cohort. Gender differences were present for the most common symmetric limb phenotypes (VARHKA3° (23.2%) in males and NEUHKA0° (38.4%) in females). Inter-subject variability was more prominent than the within-subject side differences for all parameters. Correlations analyses revealed mostly moderate correlations between the alignment measurements. Coefficients of determination showed overall weak left-to-right relationship, except for a moderate predictability for HKA (r2 = 0.538, p < 0.001) and FMA (r2 = 0.618, p < 0.001) in females. FMA and TMA marked weak predictive values for contralateral HKA. Only 60% of left knees were referenced within a 3° interval around the right knee. CONCLUSION: No strict left-to-right symmetry was observed in coronal alignment measurements. There is insufficient left-to-right agreement to consider the concept of the contralateral unaffected limb as an idealized reference for frontal plane alignment reconstruction based upon full-leg standing radiographs. LEVEL OF EVIDENCE: I.

The contralateral knee is a good predictor for determining normal knee stability: a cadaveric study.

PURPOSE: The goal is to evaluate contralateral knee joint laxity and ascertain whether or not contralateral symmetry is observable. Secondary, a validation of a knee laxity testing rig is provided. METHODS: Seven pairs of cadaveric knee specimens have been tested under passive conditions with and without external loads, involving a varus/valgus and an external/internal rotational torque and an anteroposterior shear force. RESULTS: Through the range of motion, the width of the varus/valgus laxity, internal/external laxity and anterior/posterior laxity for the medial and lateral compartment show no significant differences between left and right leg. These findings allow us to validate the setup, especially for relative values of laxity based on anatomical measures and knee joint biomechanics. CONCLUSION: A multidirectional laxity symmetry has been demonstrated for the intact knee and its contralateral knee in passive conditions as in an anesthetized patient. The passive laxity evaluation setup has been validated. Our work furthermore demonstrated a pronounced difference in anteroposterior mobility between the medial and lateral compartment of the knee, with a more stable medial side and more mobile lateral side. CLINICAL RELEVANCE: The contralateral knee can be used as reference for determining optimal knee laxity peri-operatively in total knee replacement and ligament reconstruction. LEVEL OF EVIDENCE: Level IV, Case series.