Cotton fabrics decorated with nanostructured Ag/AgX (X:Cl,Br) as reusable solar light-mediated bactericides: A comparative study.

In this study, cotton fabrics decorated with Ag/AgCl and Ag/AgBr NPs were produced by a simple hydrothermal treatment using AgCl and AgBr as precursors. Their morphological features as well as, chemical composition and structural and luminescence properties were compared. Their water disinfection aptitude against E. coli and S. aureus was also investigated under solar illumination in batch as well asin dynamic conditions. The highest activity was observed for Cot-Ag/AgCl with a quasi-complete inactivation of E. coli and S. aureus(1.5 × 107cfu mL-1) within 15 min illumination. Disinfection efficiency under continuous flow was also tested using a home-made photoreactor and the cotton fabrics with the most efficient photocatalyst (Ag/AgCl). It has shown to be efficient at least for 10 cycles revealing the robustness of the functionalization. The mechanism of photocatalytic disinfection was explained in terms of the surface plasmon resonance (SPR) induced by the presence of Ag NPs, the resulting holes, h+, being one of the most intervenient species in the disinfection mechanism. The difference in the photocatalytic efficiency between AgCl and AgBr functionalized cotton was attributed to differences in the carriers (h+and e-) lifetime. This work provides a proof of concept for the potential applicability of Cot-Ag/AgCl or Cot-Ag/AgBr for in-flow potabilization of water under solar illumination.

Functionalization of cotton fabrics with plasmonic photo-active nanostructured Au-TiO2 layer.

A simple approach to functionalize cotton fabrics with Au and TiO2 nanostructured layer is presented. Hybrid fabrics (Cot-Au-TiO2) are prepared through reduction of AuCl4- on cotton, followed by a non-aqueous sol-gel procedure using tetrabutyltitanate and a hydrothermal treatment at 110°C. The generation of crystalline TiO2 is confirmed by Raman spectroscopy. The fibres morphology and their roughness are characterized by AFM and FE-SEM. XPS shows how the concentration of the NPs precursors (Au and TiO2) affects the layer composition. GSDR (Ground State Diffuse Reflectance Absorption Spectroscopy) and LIL (Laser induced luminescence) reveal a strong quenching effect induced by Au NPs. Photocatalytic activity measured through the Remazol Blue (RB) degradation reveals an enhancement under visible light, which increases with Au loading. This strong enhancement is explained through the surface plasmon resonance brought by Au NPs.

Porphyrin dye into biopolymeric chitosan films for localized photodynamic therapy of cancer.

Porphyrins and some of its derivatives are well known and widely used as photosensitizers (PSs) for Photodynamic Therapy of Cancer (PDT). The present study regards the characterization and evaluation of a synthesized asymmetric porphyrin dye in solution to be used as PS for PDT. This molecule was also incorporated into biopolymeric films composed by chitosan, polyethylene glycol (PEG) and gelatin in order to overtake some of the disadvantages inherent to the PS, but more important, to evaluate the potential of a system composed by the porphyrin/biopolymer to be applied as localized therapeutic agents. FTIR spectroscopy showed a strong interaction between the polymers involved in the preparation of the films under study: film 1: chitosan, film 2: chitosan/PEG and film 3: chitosan/gelatin. Photochemical studies were performed for the dye in solution and into the three different biopolymeric films. Ground state absorption showed the characteristic bands of these kinds of dyes in solution and also incorporated into the films. The films composed by porphyrin/chitosan and porphyrin into chitosan/gelatin, revealed the presence of non-emissive aggregates exhibiting a strong quenching effect in the fluorescence intensity, quantum yields and lifetimes. In this way, the system composed by the porphyrin incorporated into the chitosan/PEG film presents the best fluorescence quantum yield and lifetime. The transient absorption spectra were obtained for all the systems indicating the formation of an excited triplet state of the porphyrins following excitation, which takes special importance in the generation of phototoxic species namely singlet oxygen. Singlet oxygen quantum yields were also determined and the results obtained were very promising for the dye in solution but also for the dye into the different substrates. The release of the dye from the three different films onto a buffer solution was evaluated and we conclude that after a few days the dye was completely released by the substrates in acidic conditions. Confocal microscopy was used for the determination of the intracellular localization of the compound under study onto HeLa cells (human cervical cancer cells line). The evaluation of the PSs anticancer activity assumes special importance for PDT studies. The system should be less toxic in the dark and more active when irradiated, therefore, toxicity in the dark and phototoxicity studies onto HeLa cells were performed.

Characterization of a Squaraine/Chitosan System for Photodynamic Therapy of Cancer.

In this work, a squaraine dye CS5 was characterized and evaluated for its potential in photodynamic therapy. The studies were performed in ethanol and also in a powdered biopolymer, in this case chitosan. Ground state absorption, absolute fluorescence quantum yields, fluorescence lifetimes, and transient absorption were determined in order to evaluate the advantage of adsorbing the dye onto a biopolymer. Several concentrations of the dye, adsorbed onto chitosan, were prepared in order to evaluate the concentration effect on the photophysical parameters under study. A remarkable increase in the fluorescence quantum yield and lifetimes was detected when compared with the dye in solution. Also, a very clear dependence of the fluorescence quantum yield on the concentration range was found. A lifetime distribution analysis of these systems fluorescence evidenced the entrapment of the dye onto the chitosan environment with a monoexponential decay which corresponds to the monomer emission in slightly different environments. The transient absorption spectrum was obtained without sensitization indicating the existence of a triplet state which takes special importance in the generation of phototoxic species namely singlet oxygen. The subcellular localization of a photosensitizer is critical for efficient photoinduced cell death, in this way, colocalization studies were performed within HeLa cell line (human cervical carcinoma) through confocal microscopy. Toxicity in the dark and phototoxicity of CS5 were also evaluated for the same cellular model.

Controlled growth of Cu2O nanoparticles bound to cotton fibres.

A green, safe and fast procedure is presented for in situ generation of nanoparticles (NPs) of cuprous oxide (Cu2O) onto cotton fibres at room temperature using water as a solvent. The method is based on a mild surface oxidation of cellulose fibres to generate in a controlled way carboxylic groups acting as a binding site for the adsorption of Cu(2+) via electrostatic coordination. Then, the adsorbed Cu(2+) ions were readly converted into Cu2O by dipping the treated cotton fibres into a aqueous solution of a reducing agent. Field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), as well as UV-vis absorption and emission spectroscopic methods were used to analyse the size, morphology, chemical composition and the crystalline structure of the generated nanoparticles on the fabrics. The morphology of the ensuing Cu2O nanoparticles was shown to be dependent on the reduycing agent used. Antibacterial properties of the modified fibres were also investigated.

Portuguese tin-glazed earthenware from the 17th century. Part 2: A spectroscopic characterization of pigments, glazes and pastes of the three main production centers.

Sherds representative of the three Portuguese faience production centers of the 17th century - Lisbon, Coimbra and Vila Nova were studied with the use of mostly non-invasive spectroscopies, namely: ground state diffuse reflectance absorption (GSDR), micro-Raman, Fourier-transform infrared (FT-IR) and proton induced X-ray (PIXE) or X-ray fluorescence emission (XRF). X-ray diffraction (XRD) experiments were also performed. The obtained results evidence a clear similarity in the pastes of the pottery produced Vila Nova and some of the ceramic pastes from Lisbon, in accordance with documental sources that described the use of Lisbon clays by Vila Nova potters, at least since mid 17th century. Quartz and Gehlenite are the main components of the Lisbon's pastes, but differences between the ceramic pastes were detected pointing out to the use of several clay sources. The spectroscopic trend exhibited Coimbra's pottery is remarkably different, Quartz and Diopside being the major components of these pastes, enabling one to well define a pattern for these ceramic bodies. The blue pigment from the Lisbon samples is a cobalt oxide that exists in the silicate glassy matrix, which enables the formation of detectable cobalt silicate microcrystals in most productions of the second half of the 17th century. No micro-Raman cobalt blue signature could be detected in the Vila Nova and Coimbra blue glazes. This is in accordance with the lower kiln temperatures in these two production centers and with Co(2+) ions dispersed in the silicate matrix. In all cases the white glaze is obtained with the use of tin oxide. Hausmannite was detected as the manganese oxide mineral used to produce the purple glaze (wine color "vinoso") in Lisbon.

Photochemical properties of squarylium cyanine dyes.

This study presents several new squarylium dyes derived from benzothiazole and benzoselenazole with several structural variations, namely the nature of the heteroaromatic ring and the length of the N,N'-dialkyl groups. Before being investigated in connection with their effect on living cells and/or tissues, these novel compounds were characterized, namely with respect to the determination of their main photophysical parameters. Therefore, a study of the ground state absorption, fluorescence emission (quantum yields and lifetimes) and singlet oxygen generation quantum yields was performed for all the compounds synthesized in order to evaluate their efficiency as photosensitizers. An increase of the alkyl chain length from ethyl to hexyl did not produce a clear change in the fluorescence quantum yields, showing no influence on the photoisomerization process. Heavy atom inclusion (Se instead of S) enhanced the singlet oxygen generation efficiency and decreased the intensity of the fluorescence emission. The external heavy atom effect (I(-) as a counterion instead of CF3SO3(-)) produced a significant increase in the singlet oxygen formation quantum yield (about 20%). Transient absorption studies in aerated and oxygen free samples revealed that the photoisomerization process, which could compete with the triplet state formation for all dyes in solution, is a negligible pathway for the excited state deactivation, in accordance with the rigidity introduced by the squaric ring into the polymethine chain of the dye, both in chloroform and ethanol. However, in the case of the chloroform solution a new transient was detected in air equilibrated solutions, resulting from a reaction of the excited squarylium dye in the singlet state with CHCl3˙, and assigned to the radical cation (SQ(+)˙) of the dye.

Portuguese tin-glazed earthenware from the 17th century. Part 1: pigments and glazes characterization.

Two sherds representative of the Portuguese faience production of the first and second halves of the 17th century were studied carefully with the use of non-invasive spectroscopies, namely: Ground State Diffuse Reflectance Absorption (GSDR), micro-Raman, Fourier-Transform Infrared (FT-IR), Laser Induced Luminescence (LIL) and Proton Induced X-ray (PIXE). These results were compared with the ones obtained for a Chinese Ming porcelain, Wanli period (16th/beginning of the 17th centuries), which served as an influence for the initial Lisbon's faience production. By combining information of the different non-destructive spectroscopic techniques used in this work, it was possible to conclude that: Co(3)O(4) (Co II and Co III) can be found in the silicate matrix and is the blue pigment in the "Especieiro" sample (1st half of the 17th C.). Cobalt olivine silicate (Co(2)SiO(4), Co II only) was clearly identified as the blue pigment in "Aranhões" sample (2nd half of the 17th C.) - 824 cm(-1) band in the micro-Raman-spectrum. Cobalt aluminate (CoAl(2)O(4), Co II only) is the blue pigment in the Wanli plate - 203 and 512 cm(-1) bands in the micro-Raman spectrum. The blue pigment in the 1st half 17th century of Lisbon's production was obtained by addition of a cobalt ore in low concentrations, which gives no specific Raman signature, because of complete dissolution in the glass. However, in most cases of the 2nd half 17th century, the Raman signature was quite evident, from a cobalt silicate. These findings point to the use of higher temperature kilns in the second case.

Pyrene-p-tert-butylcalixarenes inclusion complexes formation: a surface photochemistry study.

Diffuse reflectance and luminescence techniques were used to study the photophysics and photochemistry of pyrene within p-tert-butylcalix[n]arenes with n = 4, 6, and 8, and to study their ability to form inclusion complexes in heterogeneous media. Evidences for inclusion complex formation were found for the three hosts under study. Ground state diffuse reflectance results have shown the formation of ground state dimers of pyrene inside the cavity of calix[6]arene and calix[8]arene, with this feature much more evident for calix[6]arene. For calix[4]arene, only a monomer fits inside the cavity and the presence of pyrene microcrystals outside the cavity was detected. A luminescence lifetime distribution analysis was performed, revealing the presence of prompt emissions from the pyrene microcrystals outside the cavity in the case of calix[4]arene and from the constrained dimers inside the cavities of calix[6]arene and calix[8]arene. Transient absorption results have shown the presence of pyrene radical cation and also of trapped electrons for the three hosts under study. The formation of the phenoxyl radical of the calixarene following the laser pulsed excitation of pyrene at 355 nm is increased for calix[6]arene and calix[8]arene. This feature is particularly relevant for calix[6]arene, suggesting a very favourable situation for the hydrogen atom abstraction to occur. The analysis of the degradation products revealed the presence of hydroxypyrene as a major photodegradation product for the three hosts. Dihydro-hydroxypyrene was also formed in the case of calix[6]arene and calix[8]arene. The formation of the calixarene's phenoxyl radical and subsequent hydrogen abstraction is consistent with the formation of dihydro-dihydroxypyrene.

Surface photochemistry: benzophenone as a probe for the study of silica and reversed-phase silica surfaces.

This work reports the use of benzophenone, a very well characterized probe, to study new hosts: two reversed-phase silicas. Laser-induced room temperature luminescence of argon purged solid powdered samples of benzophenone adsorbed onto the two different reversed-phase silicas, RP-18 and RP-8, revealed the existence of a low energy emission band in contrast with the benzophenone adsorbed on 60 A pore silica, where only triplet benzophenone emits. This low energy emission band was identified as the fluorescence of the ketyl radical of benzophenone, which is formed as the result of a hydrogen atom abstraction reaction of the triplet excited benzophenone from the alkyl groups of the surface of the reversed silicas. Such emission does not exist for benzophenone adsorbed onto 60 A pore silica. Room temperature phosphorescence was obtained in argon purged samples for all the surfaces under use. The decay times of the benzophenone emission vary greatly with the alkylation of the silica surface when compared with "normal" silica surface. A lifetime distributions analysis has shown that the shortest lifetimes for the benzophenone emission exist in the former case. Triplet-triplet absorption of benzophenone was detected in all cases and is the predominant absorption in the case of 60 A pore silica, while benzophenone ketyl radical formation occurs in the case of the reversed silicas. Diffuse reflectance laser flash photolysis and gas chromatography-mass spectrometry techniques provided complementary information, the former about transient species and the latter regarding the final products formed after laser irradiation, both at 266 nm or 355 nm. Product analysis and identification show that the degradation photoproducts are dependent on the excitation wavelength, the photochemistry being much more rich and complex in the 266 nm excitation case, where an alpha-cleavage reaction occurs. A detailed mechanistic analysis is proposed.

Electron-transfer mechanism of the triplet state quenching of aluminium tetrasulfonated phthalocyanine by cytochrome c.

The mechanism of electron-transfer from aluminium tetrasulfonated phthalocyanine triplet state to cytochrome c was investigated in this work. This reaction successfully quenches the dye triplet state due to the formation of complexes between the solute and the protein at the active site. The electron-transfer rate constant is around 3x10(7) s(-1), and is in accordance with previous results for the singlet excited state quenching [C.A.T. Laia, S.M.B. Costa, D. Phillips, A. Beeby. Electron-transfer kinetics in sulfonated aluminum phthalocyanines/cytochrome c complexes, J. Phys. Chem. B 108 (2004) 7506-7514.] in the framework of the Marcus theory, with a reorganization energy equal to 0.94 eV. The complex formation is diffusion controlled, but heterogeneities of the protein surface charge distribution lead to quenching rate constants smaller than predicted on a hard-spheres model with electrostatic interactions. Also the binding equilibrium constant is strongly affected by this phenomenon. Ionic strength plays an important role on the complex formation, but its effect on the unimolecular electron-transfer rate constant is negligible within experimental error.