Performance of Holstein-Friesian calves drinking desalinated water in the preweaning period

Background: High salinity of drinking water can adversely affect health and productive performance of calves during artificial rearing. Objective: To evaluate the effect of drinking water total dissolved salts (TDS) content on productive performance of Holstein-Friesian calves during artificial rearing. Methods: Twenty-nine newborn Holstein-Friesian calves weighing 39±0.94 kg at birth were randomly assigned to two treatment groups for 56 d. Treatment 1 (n=14) consisted of drinking water with 1,469±75 mg L-1 TDS, while treatment 2 (n=15) used drinking water from the same source but filtered by reverse osmosis to contain 107±31 mg L-1 TDS. Results: Water intake was numerically affected by TDS concentration, increasing 13% (p>0.08) when drinking low-TDS water (3,554 versus 3,088 ml d-1). Feed intake (dry basis) decreased 26% (500 versus 676 g d-1; p0.05) by TDS content in the drinking water. Conclusion: Desalinated water improves productive performance of Holstein-Friesian calves during artificial rearing.

Antecedentes: Una alta salinidad del agua de bebida puede afectar negativamente la salud y el comportamiento productivo de los terneros durante la crianza. Objetivo: Evaluar el efecto del contenido de sales disueltas totales (SDT) en el agua de bebida sobre el comportamiento productivo de los terneros durante la crianza artificial. Métodos: Veintinueve terneros Holstein- Friesian recién nacidos, con 39±0,94 kg de peso vivo fueron asignados aleatoriamente a dos tratamientos. El tratamiento 1 consistió de 14 terneros que bebieron agua con 1.469±75 mg L-1 de SDT; mientras que al tratamiento 2 se asignaron 15 terneros que recibieron agua de la misma fuente, pero filtrada mediante el procedimiento de ósmosis inversa y conteniendo 107±31 mg L-1 de SDT. Resultados: La concentración de SDT afectó numéricamente el consumo de agua durante los 56 días de lactancia (p>0,08), incrementándose 13% cuando los terneros bebieron agua con bajo contenido de sales (3.554 vs 3.088 ml d-1). El consumo de alimento (base seca) disminuyó 26% (500 vs 676 g d-1; p0,05). Conclusión: El agua de bebida desalinizada mejora el comportamiento productivo de terneros Holstein durante la crianza artificial.

Antecedentes: Alta salinidade da água potável pode afetar adversamente a saúde e o desempenho produtivo de bezerros durante o acasalamento. Objetivo: Avaliar o efeito do total de sais dissolvidos (TSD) na água potável sobre o comportamento dos bezerros durante a lactação. Métodos: Vinte e nove terneiros Holstein-Friesian recém-nascidos, com 39±0,94 kg de peso vivo, foram designados aleatoriamente a dois tratamentos. O tratamento 1 considerou 14 terneiros os quais beberam água com 1.469±75 mg L-1 do total de sais dissolvidos (TSD); enquanto ao tratamento 2 se designaram 15 terneiros bebendo água da mesma fonte filtrada através do procedimento de osmose inversa e contendo 107±31 mg L-1 de TSD. Resultados: O consumo de água de bezerros durante os 56 dias de lactação artificial foi ligeiramente afetado pela concentração de TDS na água potável (p>0,08) e aumentou em 13% quando os bezerros beberam água com baixo teor de sal (3.554 vs 3.088 ml d-1); o consumo de alimento sólido (base seca) diminuiu em 26% (500 vs 676 g d-1; p0,05) pelo conteúdo de TSD na água de beber. Conclusão: A dessalinização da água de beber melhora o comportamento produtivo de terneiros Holstein durante o período de lactação artificial..

Overview of transparent optical ceramics for high-energy lasers at NRL.

In this review, we present our recent research progress at the Naval Research Laboratory in the development of highly transparent and rugged ceramic window materials such as MgAl2O4 spinel and ß-SiC; high-power solid-state laser gain materials based on sesquioxide such as Yb(3+):Y2O3, Yb(3+):Lu2O3, and Ho(3+):Lu2O3; and composite ceramics in the application for high-energy lasers. Various powder synthesis/purification methods and powder post-process techniques necessary to create high-purity powders are described. Ceramic fabrication processes and chemical, morphological, and optical properties of the ceramics developed at the Naval Research Laboratory (NRL) are highlighted. We also report high-efficiency lasing from a hot-pressed rare-earth sesquioxide single layer and composite ceramics made from coprecipitated powder.

Overview of transparent optical ceramics for high-energy lasers at NRL: publisher's note.

This note amends the author list of a recent publication [Appl. Opt.54, F210 (2015)].

Ceramic Laser Materials.

Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 µm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

10% Yb3+-Lu2O3 ceramic laser with 74% efficiency.

We demonstrate laser oscillation at 1080 nm with more than 16 W of output power and with an optical-to-optical slope efficiency of up to 74% using a 10% Yb3+ doped Lu2O3 ceramic made by hot pressing. This represents the highest output power and efficiency obtained for a Yb3+ doped Lu2O3 ceramic and demonstrates the feasibility for power scaling.