Selective Synthesis of Tetrasubstituted Olefins by Copper-Mediated Acetoxythiolation of Internal Alkynes: Scope and Mechanistic Studies.

The Cu-mediated synthesis of tetrasubstituted olefins by the addition of an acetate group and a thiolate to an unactivated internal alkyne is described. The reaction is fully stereoselective, because only the E alkene is obtained. If the alkyne is asymmetric, the reaction also shows a very high degree of regioselectivity. The mechanism of the reaction is elucidated by DFT methods, which show that it takes place through Cu-stabilized radical species. Calculations highlight the crucial role of the dimeric copper(II) diacetate in the process, as it generates the active species in which the sulfur center has an incipient thiyl radical character and accepting, through a series of changes in the oxidation states of the two copper centers, the two electrons released in the addition of two nucleophiles to the alkyne.

Ru-Catalyzed Regioselective CH-Hydroarylation of Alkynes with Benzylthioethers Using Sulfur as Directing Group.

Benzylthioethers react with internal alkynes in the presence of catalytic amounts of [Ru(cymene)Cl2]2 to give the corresponding ortho-alkenylated species, using sulfur as the sole directing group. The reaction is regiospecific, tolerates different substituents at both the sulfur and the aryl ring, and proceeds very efficiently with a large variety of electron-rich alkynes.

Ruthenium-Catalyzed Oxidative Coupling of Primary Amines with Internal Alkynes through C-H Bond Activation: Scope and Mechanistic Studies.

The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom-economy methodology with a broad scope of applications in the synthesis of N-heterocycles. Reactions proceed through regioselective C-H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5-substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9-dihydro-benzo[de]quinoline, 5,6,7,8-tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate-assisted C-H bond activation, migratory-insertion, and C-N bond formation steps that involve 28-30 kcal mol(-1) . The computational study is extended to additional substrates, namely, 1-naphthylmethyl-, 2-methylallyl-, and 2-thiophenemethylamines.

Primary amines as directing groups in the Ru-catalyzed synthesis of isoquinolines, benzoisoquinolines, and thienopyridines.

Isoquinolines, benzoisoquinolines, thieno[3,2-c]pyridines and fused heteroaryl[2,3-c] pyridines, with a wide variety of substituents at different positions of the aromatic or heteroaromatic rings, have been synthesized by Ru-catalyzed oxidative coupling of a broad range of benzylamines or heterocycles with internal alkynes. All benzylamines and heterocycles have unprotected primary amines as efficient directing groups.

Influence of temperature and pressure on cyclic carbonate synthesis catalyzed by bimetallic aluminum complexes and application to overall syn-bis-hydroxylation of alkenes.

The effect of moderate temperatures (22-100 °C) and pressures (1-10 bar) on the synthesis of cyclic carbonates from epoxides and carbon dioxide catalyzed by a combination of bimetallic aluminum complexes and tetrabutylammonium bromide is investigated. The combined bimetallic complex and tetrabutylammonium bromide catalyst system is shown to be an order of magnitude more active than the use of tetrabutylammonium bromide alone at all temperatures and pressures studied. At the higher temperatures and pressures used, disubstituted epoxides become substrates for the reaction and it is shown that reactions proceed with retention of the epoxide stereochemistry. This allowed a route for the overall syn-bis-hydroxylation of alkenes to be developed without the use of hazardous metal based reagents. At higher pressures it is also possible to use compressed air as the carbon dioxide source.

Proline-catalysed amination reactions in cyclic carbonate solvents.

Propylene carbonate is shown to be an environmentally friendly and sustainable replacement for dichloromethane and acetonitrile in proline-catalysed a-hydrazinations of aldehydes and ketones. Enantioselectivities comparable to those obtained in conventional solvents or ionic liquids can be obtained, even when using a lower catalyst loading.

One-component bimetallic aluminium(salen)-based catalysts for cyclic carbonate synthesis and their immobilization.

The development of one-component, bimetallic µ-oxoaluminium(salen) complexes as highly active catalysts for the synthesis of cyclic carbonates from terminal epoxides is described. The resulting homogeneous catalysts are used in batch reactions at room temperature and one atmosphere pressure. The catalysts have also been immobilized onto various support materials and used in either batch reactions or gas-phase flow reactions with ethylene and propylene oxides. Catalyst lifetime, deactivation and reactivation have been studied in both batch and flow reactions, and it has been shown that of the impurities present in power station flue gas, only sulfur trioxide deactivates the catalyst and at the concentrations of sulfur trioxide present in flue gas, this deactivation would require more than one years exposure of the catalyst to flue gas.

A bimetallic aluminum(salen) complex for the synthesis of 1,3-oxathiolane-2-thiones and 1,3-dithiolane-2-thiones.

The combined use of the bimetallic aluminum(salen) complex [Al(salen)](2)O and tetrabutylammonium bromide (or tributylamine) is found to catalyze the reaction between epoxides and carbon disulfide. In most cases, at 50 °C, the reaction produces 1,3-oxathiolane-2-thiones, while at 90 °C, 1,3-dithiolane-2-thiones are the main product. The structure and stereochemistry of three of the 1,3-dithiolane-2-thiones is unambiguously determined by X-ray crystallographic analysis, and this is used to correct errors in the literature concerning the synthesis of cyclic di- and trithiocarbonates. The kinetics of 1,3-oxathiolane-2-thione synthesis are determined, and the resulting rate equation, along with a stereochemical analysis of the reaction and catalyst modification studies, is used to determine a mechanism for the synthesis of 1,3-oxathiolane-2-thiones which contrasts with the mechanism previously determined for cyclic carbonate synthesis using the same bimetallic aluminum(salen) complex.

A chiral solvent effect in asymmetric organocatalysis.

Proline-catalyzed aldol reactions between enolizable ketones and aromatic aldehydes can be carried out in propylene carbonate. When enantiomerically pure propylene carbonate is used, the combination of (R)-proline and (R)-propylene carbonate constitutes a matched pair, while (S)-proline and (R)-propylene carbonate constitutes a mismatched pair.

One-component catalysts for cyclic carbonate synthesis.

Homogeneous and immobilized one-component catalysts for the conversion of epoxides and carbon dioxide into cyclic carbonates at atmospheric pressure and room temperature have been developed.

Fluorocarbon soluble copper(II) carboxylate complexes with nonfluoroponytailed nitrogen ligands as precatalysts for the oxidation of alkenols and alcohols under fluorous biphasic or thermomorphic modes: structural and mechanistic aspects.

This fluorous biphasic catalysis (FBC) contribution was focused on the synthesis and characterization of new fluorous soluble R(f)-Cu(II) carboxylate complexes containing nonfluoroponytailed ligands and defines their role as precatalysts for the FBC oxidation of alkenols and alcohols in the presence of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/O(2). In this FBC approach, we have utilized the phase-switching technique of Vincent et al. (J. Am. Chem. Soc. 2002, 124, 12942) to solubilize the nonfluoroponytailed ligands, N-1,4,7-Me(3)TACN, 2, and N-1,4,7-pentamethyldiethylenetriamine (PMDETA), 3, by reaction with a fluorous solvent-soluble copper (II) dimeric complex, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)](2), 1. Moreover, the reaction of nonfluoroponytailed ligands 2 and 3 with 1 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)(2)], 4, and [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2) (3)], 5, respectively. The known Cu(II) complex, 1, was further characterized by electron paramagnetic resonance (EPR) spectroscopy confirming its dimeric structure, while 4 and 5 were characterized by elemental analysis, IR, diffuse reflectance UV-vis, and EPR spectroscopy. Furthermore, 1, 4, and 5 were evaluated as precatalysts for alkenol and alcohol oxidation. The oxidation reactions of alkenols and alcohols in the presence of TEMPO/O(2) proceeded under FBC conditions for 1, 4, and 5, but 1-octanol was unreactive under single-phase FBC conditions at 90 degrees C with TEMPO/O(2). The thermomorphic property of 5, soluble in chlorobenzene/toluene at 90 degrees C but insoluble at room temperature, was also evaluated in the selective oxidation of p-nitrobenzyl alcohol to p-nitrobenzaldehyde. Plausible mechanisms concerning these FBC/thermomorphic oxidation reactions will be discussed.

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons, olefins, and alcohols, including mechanistic implications.

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.