A multi-edge study: investigating Co oxidation states of pristine LiNixMnyCo1-x-yO2 cathode materials by high energy-resolution X-ray spectrometry.

The investigation of Co oxidation states in pristine LiNixMnyCo1-x-yO2 (NMC) cathodes (NMC111, NMC622, NMC811) has been a subject of ongoing debate, with conflicting findings in the literature. In this study, we present a novel and comprehensive approach to address and clarify this issue using a variety of high energy-resolution X-ray spectroscopy techniques. To shed light on the Co oxidation states in NMC cathodes, we employed independent measurements including X-ray absorption spectrometry in both soft and hard X-ray ranges, as well as resonant X-ray emission spectrometry in the soft X-ray range. The investigation centered on the transition metal (TM) K and L edges, providing a thorough exploration of the electronic structure transitions. The study identified minor shifts in Co oxidation states, and theoretical calculations quantified the ratio of Co atoms undergoing oxidation state changes, which were approximately 2.05% (NMC111 to NMC622) and 3.75% (NMC111 to NMC811). Independent measurements that targeted electronic structure transitions using K-edge and L-edge absorption and emission spectrometry were strategically combined to enhance the reliability of the results. The diverse methodological approach aimed to contribute to a comprehensive understanding of Co oxidation states in NMC cathodes. This study highlights the importance of combining complementary techniques to address intricate scientific debates effectively.

SHINERS Study of Chloride Order-Disorder Phase Transition and Solvation of Cu(100).

Shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS) and density functional theory (DFT) are used to probe Cl- adsorption and the order-disorder phase transition associated with the c(2 × 2) Cl- adlayer on Cu(100) in acid media. A two-component ν(Cu-Cl) vibrational band centered near 260 ± 1 cm-1 is used to track the potential dependence of Cl- adsorption. The potential dependence of the dominant 260 cm-1 component tracks the coverage of the fluctional c(2 × 2) Cl- phase on terraces in good agreement with the normalized intensity of the c(2 × 2) superstructure rods in prior surface X-ray diffraction (SXRD) studies. As the c(2 × 2) Cl- coverage approaches saturation, a second ν(Cu-Cl) component mode emerges between 290 and 300 cm-1 that coincides with the onset and stiffening of step faceting where Cl- occupies the threefold hollow sites to stabilize the metal kink saturated Cu <100> step edge. The formation of the c(2 × 2) Cl- adlayer is accompanied by the strengthening of ν(O-H) stretching modes in the adjacent non-hydrogen-bonded water at 3600 cm-1 and an increase in hydronium concentration evident in the flanking H2O modes at 3100 cm-1. The polarization of the water molecules and enrichment of hydronium arise from the combination of Cl- anionic character and lateral templating provided by the c(2 × 2) adlayer, consistent with SXRD studies. At negative potentials, Cl- desorption occurs followed by development of a sulfate νs(S═O) band. Below -1.1 V vs Hg/HgSO4, a new 200 cm-1 mode emerges congruent with hydride formation and surface reconstruction reported in electrochemical scanning tunneling microscopy studies.

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy.

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C3H8, 15 kPa O2, 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. This work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

Investigating the electronic structure of high explosives with X-ray Raman spectroscopy.

We investigate the sensitivity and potential of a synergistic experiment-theory X-ray Raman spectroscopy (XRS) methodology on revealing and following the static and dynamic electronic structure of high explosive molecular materials. We show that advanced ab-initio theoretical calculations accounting for the core-hole effect based on the Bethe-Salpeter Equation (BSE) approximation are critical for accurately predicting the shape and the energy position of the spectral features of C and N core-level spectra. Moreover, the incident X-ray dose typical XRS experiments require can induce, in certain unstable structures, a prominent radiation damage at room temperature. Upon developing a compatible cryostat module for enabling cryogenic temperatures ([Formula: see text] 10 K) we suppress the radiation damage and enable the acquisition of reliable experimental spectra in excellent agreement with the theory. Overall, we demonstrate the high sensitivity of the recently available state-of-the-art X-ray Raman spectroscopy capabilities in characterizing the electronic structure of high explosives. At the same time, the high accuracy of the theoretical approach may enable reliable identification of intermediate structures upon rapid chemical decomposition during detonation. Considering the increasing availability of X-ray free-electron lasers, such a combined experiment-theory approach paves the way for time-resolved dynamic studies of high explosives under detonation conditions.

Land reversion and zoonotic spillover risk.

Deforestation alters wildlife communities and modifies human-wildlife interactions, often increasing zoonotic spillover potential. When deforested land reverts to forest, species composition differences between primary and regenerating (secondary) forest could alter spillover risk trajectory. We develop a mathematical model of land-use change, where habitats differ in their relative spillover risk, to understand how land reversion influences spillover risk. We apply this framework to scenarios where spillover risk is higher in deforested land than mature forest, reflecting higher relative abundance of highly competent species and/or increased human-wildlife encounters, and where regenerating forest has either very low or high spillover risk. We find the forest regeneration rate, the spillover risk of regenerating forest relative to deforested land, and how rapidly regenerating forest regains attributes of mature forest determine landscape-level spillover risk. When regenerating forest has a much lower spillover risk than deforested land, reversion lowers cumulative spillover risk, but instaneous spillover risk peaks earlier. However, when spillover risk is high in regenerating and cleared habitats, landscape-level spillover risk remains high, especially when cleared land is rapidly abandoned then slowly regenerates to mature forest. These results suggest that proactive wildlife management and awareness of human exposure risk in regenerating forests could be important tools for spillover mitigation.

Advances in the OCEAN-3 spectroscopy package.

The OCEAN code for calculating valence- and core-level spectra using the Bethe-Salpeter equation is briefly reviewed. OCEAN is capable of calculating optical absorption, near-edge X-ray absorption or non-resonant scattering, and resonant inelastic X-ray scattering, requiring only the structure of the material as input. Improved default behavior and reduced input requirements are detailed as well as new capabilities, such as incorporation of final-state-dependent broadening, finite-temperature dependence, and flexibility in the density-functional theory exchange-correlation potentials. OCEAN is built on top of a plane-wave, pseudopotential, density-functional theory foundation, and calculations are shown for systems ranging in size up to 7 nm3.

Local Structure of Sulfur Vacancies on the Basal Plane of Monolayer MoS2.

The nature of the S-vacancy is central to controlling the electronic properties of monolayer MoS2. Understanding the geometric and electronic structures of the S-vacancy on the basal plane of monolayer MoS2 remains elusive. Here, operando S K-edge X-ray absorption spectroscopy shows the formation of clustered S-vacancies on the basal plane of monolayer MoS2 under reaction conditions (H2 atmosphere, 100-600 °C). First-principles calculations predict spectral fingerprints consistent with the experimental results. The Mo K-edge extended X-ray absorption fine structure shows the local structure as coordinatively unsaturated Mo with 4.1 ± 0.4 S atoms as nearest neighbors (above 400 °C in an H2 atmosphere). Conversely, the 6-fold Mo-Mo coordination in the crystal remains unchanged. Electrochemistry confirms similar active sites for hydrogen evolution. The identity of the S-vacancy defect on the basal plane of monolayer MoS2 is herein elucidated for applications in optoelectronics and catalysis.

Method for the definitive detection of orbital angular momentum states in neutrons by spin-polarized 3He.

A standard method to detect thermal neutrons is the nuclear interaction 3He(n,p)3H. The spin dependence of this interaction is also the basis of a neutron spin-polarization filter using nuclear polarized 3He. We consider the corresponding interaction for neutrons placed in an intrinsic orbital angular momentum (OAM) state. We derive the relative polarization-dependent absorption cross sections for neutrons in an L=1 OAM state. The absorption of those neutrons results in compound states Jπ=0-, 1-, and 2-. Varying the three available polarizations tests that an OAM neutron has been absorbed and probes which decay states are physically possible. We describe the energetically likely excited states of 4He after absorption, taking account of the odd parity of the compound state. This provides a definitive method for detecting neutron OAM states and suggests that intrinsic OAM states offer the possibility to observe new physics, including anomalous cross sections and new channels of radioactive decay.

Fast, efficient, and accurate dielectric screening using a local real-space approach.

Various many-body perturbation theory techniques for calculating electron behavior rely on W, the screened Coulomb interaction. Computing W requires complete knowledge of the dielectric response of the electronic system, and the fidelity of the calculated dielectric response limits the reliability of predicted electronic and structural properties. As a simplification, calculations often begin with the random-phase approximation (RPA). However, even RPA calculations are costly and scale poorly, typically as N 4 (N representing the system size). A local approach has been shown to be efficient while maintaining accuracy for screening core-level excitations [Ultramicroscopy 106, 986 (2006)]. We extend this method to valence-level excitations. We present improvements to the accuracy and execution of this scheme, including reconstruction of the all-electron character of the pseudopotential-based wave functions, improved N 2 log N scaling, and a parallelized implementation. We discuss applications to Bethe-Salpeter equation calculations of core and valence spectroscopies.

Compressive Stress and Charge Redistribution during CO Adsorption onto Pt.

The change in surface stress associated with the adsorption and oxidative stripping of carbon monoxide (CO) on (111)-textured Pt is examined using the wafer curvature method in 0.1 mol/L KHCO3 electrolyte. The curvature of the Pt cantilever electrode was monitored as a function of potential in both CO-free and CO-saturated electrolytes. Although CO adsorbs as a neutral molecule, significant compressive stress, up to -1.3 N/m, is induced in the Pt. The magnitude of the stress change correlates directly with the CO coverage and, within the detection limits of the stress measurement, is elastically reversible. Density functional theory calculations of a CO-bound Pt surface indicate that charge redistribution from the first atomic layer of Pt to subsurface layers accounts for the observed compressive stress induced by the charge neutral adsorption of CO. A better understanding of adsorbate-induced surface stress is critical for the development of material platforms for sensing and catalysis.

Origin of enhanced water oxidation activity in an iridium single atom anchored on NiFe oxyhydroxide catalyst.

The efficiency of the synthesis of renewable fuels and feedstocks from electrical sources is limited, at present, by the sluggish water oxidation reaction. Single-atom catalysts (SACs) with a controllable coordination environment and exceptional atom utilization efficiency open new paradigms toward designing high-performance water oxidation catalysts. Here, using operando X-ray absorption spectroscopy measurements with calculations of spectra and electrochemical activity, we demonstrate that the origin of water oxidation activity of IrNiFe SACs is the presence of highly oxidized Ir single atom (Ir5.3+) in the NiFe oxyhydroxide under operating conditions. We show that the optimal water oxidation catalyst could be achieved by systematically increasing the oxidation state and modulating the coordination environment of the Ir active sites anchored atop the NiFe oxyhydroxide layers. Based on the proposed mechanism, we have successfully anchored Ir single-atom sites on NiFe oxyhydroxides (Ir0.1/Ni9Fe SAC) via a unique in situ cryogenic-photochemical reduction method that delivers an overpotential of 183 mV at 10 mA ⋅ cm-2 and retains its performance following 100 h of operation in 1 M KOH electrolyte, outperforming the reported catalysts and the commercial IrO2 catalysts. These findings open the avenue toward an atomic-level understanding of the oxygen evolution of catalytic centers under in operando conditions.

Alternative transmission pathways for guinea worm in dogs: implications for outbreak risk and control.

Guinea worm (Dracunculus medinensis) has exerted a high human health burden in parts of Africa. Complete eradication of Guinea worm disease (dracunculiasis) may be delayed by the circulation of the parasite in domestic dogs. As with humans, dogs acquire the parasite by directly ingesting infected copepods, and recent evidence suggests that consuming frogs that ingested infected copepods as tadpoles may be a viable transmission route (paratenic route). To understand the relative contributions of direct and paratenic transmission routes, we developed a mathematical model that describes transmission of Guinea worm between dogs, copepods and frogs. We explored how the parasite basic reproductive number (R0) depends on parameters amenable to actionable interventions under three scenarios: frogs/tadpoles do not consume copepods; tadpoles consume copepods but frogs do not contribute to transmission; and frogs are paratenic hosts. We found a non-monotonic relationship between the number of dogs and R0. Generally, frogs can contribute to disease control by removing infected copepods from the waterbody even when paratenic transmission can occur. However, paratenic transmission could play an important role in maintaining the parasite when direct transmission is reduced by interventions focused on reducing copepod ingestion by dogs. Together, these suggest that the most effective intervention strategies may be those which focus on the reduction of copepods, as this reduces outbreak potential irrespective of the importance of the paratenic route.

Database of ab initio L-edge X-ray absorption near edge structure.

The L-edge X-ray Absorption Near Edge Structure (XANES) is widely used in the characterization of transition metal compounds. Here, we report the development of a database of computed L-edge XANES using the multiple scattering theory-based FEFF9 code. The initial release of the database contains more than 140,000 L-edge spectra for more than 22,000 structures generated using a high-throughput computational workflow. The data is disseminated through the Materials Project and addresses a critical need for L-edge XANES spectra among the research community.

Operando Study of Thermal Oxidation of Monolayer MoS2.

Monolayer MoS2 is a promising semiconductor to overcome the physical dimension limits of microelectronic devices. Understanding the thermochemical stability of MoS2 is essential since these devices generate heat and are susceptible to oxidative environments. Herein, the promoting effect of molybdenum oxides (MoO x ) particles on the thermal oxidation of MoS2 monolayers is shown by employing operando X-ray absorption spectroscopy, ex situ scanning electron microscopy and X-ray photoelectron spectroscopy. The study demonstrates that chemical vapor deposition-grown MoS2 monolayers contain intrinsic MoO x and are quickly oxidized at 100 °C (3 vol% O2/He), in contrast to previously reported oxidation thresholds (e.g., 250 °C, t ≤ 1 h in the air). Otherwise, removing MoO x increases the thermal oxidation onset temperature of monolayer MoS2 to 300 °C. These results indicate that MoO x promote oxidation. An oxide-free lattice is critical to the long-term stability of monolayer MoS2 in state-of-the-art 2D electronic, optical, and catalytic applications.

Coulombically-stabilized oxygen hole polarons enable fully reversible oxygen redox.

Stabilizing high-valent redox couples and exotic electronic states necessitate an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while such reorganization partially stabilizes oxygen redox, it also gives rise to substantial hysteresis. In this work, we investigate oxygen redox in layered Na2-XMn3O7, a positive electrode material with ordered Mn vacancies. We prove that coulombic interactions between oxidized oxideanions and the interlayer Na vacancies can disfavor rehybridization and stabilize hole polarons on oxygen (O-) at 4.2 V vs. Na/Na+. These coulombic interactions provide thermodynamic energy saving as large as O-O covalent bonding and enable ~ 40 mV voltage hysteresis over multiple electrochemical cycles with negligible voltage fade. Our results establish a complete picture of redox energetics by highlighting the role of coulombic interactions across several atomic distances and suggest avenues to stabilize highly oxidized oxygen for applications in energy storage and beyond.

Resolving the Geometry/Charge Puzzle of the c(2 × 2)-Cl Cu(100) Electrode.

Potential-induced changes in charge and surface structure are significant drivers of the reactivity of electrochemical interfaces but are frequently difficult to decouple from the effects of surface solvation. Here, we consider the Cu(100) surface with a c(2 × 2)-Cl adlayer, a model surface with multiple geometry measurements under both ultrahigh vacuum and electrochemical conditions. Under aqueous electrochemical conditions, the measured Cu-Cl interplanar separation (dCu-Cl) increases by at least 0.3 Å relative to that under ultrahigh vacuum conditions. This large geometry change is unexpected for a hydrophobic surface, and it requires invoking a negative charge on the Cl-covered surface which is much greater than expected from the work function and our capacitance measurements. To resolve this inconsistency we employ ab initio calculations and find that the Cu-Cl separation increases with charging at a rate of 0.7 Å/e- per Cl atom. The larger Cu-Cl bond distance increases the surface dipole and, therefore, the work function of the interface, contributing to the negative charge under fixed potential electrochemical conditions. Interactions with water are not needed to explain either the large charge or large Cu-Cl interplanar spacing of this surface under electrochemical conditions.

Faster exact exchange in periodic systems using single-precision arithmetic.

Density-functional theory simplifies many-electron calculations by approximating the exchange and correlation interactions with a one-electron operator that is a functional of the density. Hybrid functionals incorporate some amount of exact exchange, improving agreement with measured electronic and structural properties. However, calculations with hybrid functionals require substantial computational resources, limiting their use. By calculating the exchange interaction of periodic systems with single-precision arithmetic, the computation time is cut nearly in half with a negligible loss in accuracy. This improvement makes exact exchange calculations quicker and more feasible, especially for high-throughput calculations. Example hybrid density-functional theory calculations of band energies, forces, and x-ray absorption spectra show that this single-precision implementation maintains accuracy with significantly reduced runtime and memory requirements.

Speciation of iron sulfide compounds by means of X-ray Emission Spectroscopy using a compact full-cylinder von Hamos spectrometer.

We present experimental and theoretical X-ray emission spectroscopy (XES) data of the Fe Kß line for Iron(II)sulfide (FeS) and Iron(II)disulfide (FeS2). In comparison to X-ray absorption spectroscopy (XAS), XES offers different discrimination capabilities for chemical speciation, depending on the valence states of the compounds probed and, more importantly in view of a a broader, laboratory-based use, a larger flexibility with respect to the excitation source used. The experimental Fe Kß XES data was measured using polychromatic X-ray radiation and a compact full-cylinder von Hamos spectrometer while the calculations were realized using the OCEAN code. The von Hamos spectrometer used is characterized by an energy window of up to 700 eV and a spectral resolving power of E/ΔE = 800. The large energy window at a single position of the spectrometer components is made profit of to circumvent the instrumental sensitivity of wavelength-dispersive spectrometers to sample positioning. This results in a robust energy scale which is used to compare experimental data with ab initio valence-to-core calculations, which are carried out using the ocean package. To validate the reliability of the ocean package for the two sample systems, near edge X-ray absorption fine structure measurements of the Fe K absorption edge are compared to theory using the same input parameters as in the case of the X-ray emission calculations. Based on the example of iron sulfide compounds, the combination of XES experiments and ocean calculations allows unravelling the electronic structure of different transition metal sulfides and qualifying XES investigations for the speciation of different compounds.

Site-Specific Structure at Multiple Length Scales in Kagome Quantum Spin Liquid Candidates.

Realizing a quantum spin liquid (QSL) ground state in a real material is a leading issue in condensed matter physics research. In this pursuit, it is crucial to fully characterize the structure and influence of defects, as these can significantly affect the fragile QSL physics. Here, we perform a variety of cutting-edge synchrotron X-ray scattering and spectroscopy techniques, and we advance new methodologies for site-specific diffraction and L-edge Zn absorption spectroscopy. The experimental results along with our first-principles calculations address outstanding questions about the local and long-range structures of the two leading kagome QSL candidates, Zn-substituted barlowite (Cu3Zn x Cu1-x (OH)6FBr) and herbertsmithite (Cu3Zn(OH)6Cl2). On all length scales probed, there is no evidence that Zn substitutes onto the kagome layers, thereby preserving the QSL physics of the kagome lattice. Our calculations show that antisite disorder is not energetically favorable and is even less favorable in Zn-barlowite compared to herbertsmithite. Site-specific X-ray diffraction measurements of Zn-barlowite reveal that Cu2+ and Zn2+ selectively occupy distinct interlayer sites, in contrast to herbertsmithite. Using the first measured Zn L-edge inelastic X-ray absorption spectra combined with calculations, we discover a systematic correlation between the loss of inversion symmetry from pseudo-octahedral (herbertsmithite) to trigonal prismatic coordination (Zn-barlowite) with the emergence of a new peak. Overall, our measurements suggest that Zn-barlowite has structural advantages over herbertsmithite that make its magnetic properties closer to an ideal QSL candidate: its kagome layers are highly resistant to nonmagnetic defects while the interlayers can accommodate a higher amount of Zn substitution.

Vector-borne parasite invasion in communities across space and time.

While vector-borne parasite transmission often operates via generalist-feeding vectors facilitating cross-species transmission in host communities, theory describing the relationship between host species diversity and parasite invasion in these systems is underdeveloped. Host community composition and abundance vary across space and time, generating opportunities for parasite invasion. To explore how host community variation can modify parasite invasion potential, we develop a model for vector-borne parasite transmission dynamics that includes a host community of arbitrary richness and species' abundance. To compare invasion potential across communities, we calculate the community basic reproductive ratio of the parasite. We compare communities comprising a set of host species to their subsets, which allows for flexible scenario building including the introduction of novel host species and species loss. We allow vector abundance to scale with, or be independent of, community size, capturing regulation by feeding opportunities and non-host effects such as limited oviposition sites. Motivated by equivocal data relating host species competency to abundance, we characterize plausible host communities via phenomenological relationships between host species abundance and competency. We identify an underappreciated mechanism whereby changes to communities simultaneously alter average competency and the vector to host ratio and demonstrate that the interaction can profoundly influence invasion potential.