Characterization and Performance Analysis of Hydrolyzed versus Non-Hydrolyzed Poly(NVF-co-HEA) Hydrogels for Cosmetic Applications.

This study explores the synthesis and modification of poly(N-vinylformamide-co-N-hydroxyethyl acrylamide) (poly(NVF-co-HEA)) hydrogels for cosmetic applications. Poly(NVF-co-HEA) hydrogels were produced followed by an acid hydrolysis reaction to produce poly(NVF-co-VAm-co-HEA) hydrogels, introducing poly(vinyl amine) (PVAm) into the structure. This modification considerably alters the hydrogels' properties, yielding materials with over 96% water content, predominantly in the form of non-freezing or free water, which is beneficial in the uptake and release of hydrophilic species. The primary amine groups from inclusion of VAm also improved the mechanical properties, as evidenced by an 8-fold increase in Young's modulus. The hydrogels also possessed pH-responsive behavior, which was particularly noticeable under acidic and basic conditions, where a large decrease in water content was observed (40% to 75% reduction). Characterizing the hydrogels' release capabilities involved using organic dyes of different functional groups and sizes to examine the pH impact on release. The results indicated that hydrolyzed hydrogels interacted more effectively with charged species, highlighting their suitability for pH-responsive delivery. The release of cosmetic active ingredients was also demonstrated through the controlled release of Liquid Azelaic™, specifically potassium azeloyl diglycinate (PAD). Our findings reveal that the hydrolyzed hydrogels exhibit superior burst release, especially under alkaline conditions, suggesting their suitability for cosmetic applications where controlled, pH-responsive delivery of active ingredients is desired. Overall, this investigation highlights the potential of hydrolyzed poly(NVF-co-HEA) hydrogels in cosmetic applications. Their ability to combine high water content with mechanical integrity, along with their pH-responsive release ability, allows for use in cosmetic formulations.

In Vitro Wound Healing Potential of a Fibroin Film Incorporating a Cannabidiol/2-Hydroxypropyl-ß-cyclodextrin Complex.

This study aimed to develop a film dressing prepared by incorporating a complex of cannabidiol and 2-hydroxypropyl-ß-cyclodextrin (CBD/HP-ß-CD) into a fibroin-based film and to investigate its wound healing capabilities. The fibroin from silkworm cocoons exhibited a total protein content of 96.34 ± 0.14% w/w and a molecular weight range of 25 to 245 kDa. Fourier-transform infrared spectroscopy (FTIR) revealed the presence of characteristic amide peaks (I, II, and III) in the isolated fibroin. The CBD/HP-ß-CD complex, prepared with a molar ratio of 1:2 (CBD to HP-ß-CD), had 81.5 ± 1.2% w/w CBD content, as determined by high-performance liquid chromatography (HPLC). X-ray diffraction (XRD) and FTIR analyses demonstrated successful encapsulation of CBD's hydrophobic aromatic rings by HP-ß-CD. Blending the fibroin solution with the CBD/HP-ß-CD complex produced a transparent, slightly yellowish film. Mechanical testing revealed a tensile strength of 48.67 ± 2.57 MPa and a % elongation at a break of 1.71 ± 0.21%. XRD and FTIR analyses showed distinctive crystalline and chemical structures of the film. In subsequent in vitro experiments with normal human dermal fibroblasts, the film demonstrated potential for wound healing. An increase in cell division (G2/M phase) was observed compared to the fibroin film without the CBD/HP-ß-CD complex. Additionally, fibroblasts treated with the film exhibited enhanced cell migration in a scratch assay and increased expression of vascular endothelial growth factor protein compared to the control group. Overall, these findings underscore the film's potential for enhancing wound healing outcomes.

Porous Poly(2-hydroxyethyl methacrylate) Hydrogel Scaffolds for Tissue Engineering: Influence of Crosslinking Systems and Silk Sericin Concentration on Scaffold Properties.

Tailored porous structures of poly(2-hydroxyethyl methacrylate) (PHEMA) and silk sericin (SS) were used to create porous hydrogel scaffolds using two distinct crosslinking systems. These structures were designed to closely mimic the porous nature of the native extracellular matrix. Conventional free radical polymerization of 2-hydroxyethyl methacrylate (HEMA) was performed in the presence of different concentrations of SS (1.25, 2.50, 5.00% w/v) with two crosslinking systems. A chemical crosslinking system with N'N-methylene bisacrylamide (MBAAm) and a physical crosslinking system with dimethylurea (DMU) were used: C-PHEMA/SS (crosslinked using MBAAm) and C-PHEMA/pC-SS (crosslinked using MBAAm and DMU). The focus of this study was on investigating the impact of these crosslinking methods on various properties of the scaffolds, including pore size, pore characteristics, polymerization time, morphology, molecular interaction, in vitro degradation, thermal properties, and in vitro cytotoxicity. The various crosslinked networks were found to appreciably influence the properties of the scaffolds, especially the pore sizes, in which smaller sizes and higher numbers of pores with high regularity were seen in C-PHEMA/1.25 pC-SS (17 ± 2 µm) than in C-PHEMA/1.25 SS (34 ± 3 µm). Semi-interpenetrating networks were created by crosslinking PHEMA-MBAAm-PHEMA while incorporating free protein molecules of SS within the networks. The additional crosslinking step involving DMU occurred through hydrogen bonding of the -C=O and -N-H groups with the SS, resulting in the simultaneous incorporation of DMU and SS within the PHEMA networks. As a consequence of this process, the scaffold C-PHEMA/pC-SS exhibited smaller pore sizes compared to scaffolds without DMU crosslinking. Moreover, the incorporation of higher loadings of SS led to even smaller pore sizes. Additionally, the gelation time of C-PHEMA/pC-SS was delayed due to the presence of DMU in the crosslinking system. Both porous hydrogel scaffolds, C-PHEMA/pC-SS and PHEMA, were found to be non-cytotoxic to the normal human skin dermal fibroblast cell line (NHDF cells). This promising result indicates that these hydrogel scaffolds have potential for use in tissue engineering applications.

Hydroquinine Inhibits the Growth of Multidrug-Resistant Pseudomonas aeruginosa via the Suppression of the Arginine Deiminase Pathway Genes.

Hydroquinine has antimicrobial potential with demonstrated activity against several bacteria, including multidrug-resistant (MDR) P. aeruginosa reference strains. Despite this, there is limited evidence confirming the antibacterial activity of hydroquinine against clinical isolates and the underlying mechanism of action. Here, we aimed to investigate the antibacterial effect of hydroquinine in clinical P. aeruginosa strains using phenotypic antimicrobial susceptibility testing and synergistic testing. In addition, we examined the potential inhibitory mechanisms against MDR P. aeruginosa isolates using informatic-driven molecular docking analysis in combination with RT-qPCR. We uncovered that hydroquinine inhibits and kills clinical P. aeruginosa at 2.50 mg/mL (MIC) and 5.00 mg/mL (MBC), respectively. Hydroquinine also showed partial synergistic effects with ceftazidime against clinical MDR P. aeruginosa strains. Using SwissDock, we identified potential interactions between arginine deiminase (ADI)-pathway-related proteins and hydroquinine. Furthermore, using RT-qPCR, we found that hydroquinine directly affects the mRNA expression of arc operon. We demonstrated that the ADI-related genes, including the arginine/ornithine antiporter (arcD) and the three enzymes (arginine deiminase (arcA), ornithine transcarbamylase (arcB), and carbamate kinase (arcC)), were significantly downregulated at a half MIC of hydroquinine. This study is the first report that the ADI-related proteins are potential molecular targets for the inhibitory effect of hydroquinine against clinically isolated MDR P. aeruginosa strains.

Development of Natural Active Agent-Containing Porous Hydrogel Sheets with High Water Content for Wound Dressings.

This work was concerned with the fabrication of a porous hydrogel system suitable for medium to heavy-exudating wounds where traditional hydrogels cannot be used. The hydrogels were based on 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPs). In order to produce the porous structure, additional components were added (acid, blowing agent, foam stabilizer). Manuka honey (MH) was also incorporated at concentrations of 1 and 10% w/w. The hydrogel samples were characterized for morphology via scanning electron microscopy, mechanical rheology, swelling using a gravimetric method, surface absorption, and cell cytotoxicity. The results confirmed the formation of porous hydrogels (PH) with pore sizes ranging from ~50-110 µm. The swelling performance showed that the non-porous hydrogel (NPH) swelled to ~2000%, while PH weight increased ~5000%. Additionally, the use of a surface absorption technique showed that the PH absorbed 10 µL in <3000 ms, and NPH absorbed <1 µL over the same time. Incorporating MH the enhanced gel appearance and mechanical properties, including smaller pores and linear swelling. In summary, the PH produced in this study had excellent swelling performance with rapid absorption of surface liquid. Therefore, these materials have the potential to expand the applicability of hydrogels to a range of wound types, as they can both donate and absorb fluid.

Development of Biocellulose Sheet Incorporating Aloe vera Gel Extract for Diabetic Wound Healing.

In this study, a biocellulose (BC) sheet containing Aloe vera gel extract (AE) was developed for application in healing chronic wounds, such as diabetic wounds. The BC sheet was produced by Acetobacter xylinum and then lyophilized to obtain dried sheets. A. vera gel was extracted by precipitation in 35% ammonium sulfate, lyophilized, dried, and incorporated into the BC sheet. The protein content of the AE was 12.32 ± 3.4% w/w, with a molecular weight of ∼20 kDa. The release of TNF-α from lipopolysaccharide-induced RAW264.7 cells was reduced by treatment with AE in a dose-dependent manner. The physicochemical and biological properties of the developed sheet were investigated. Morphological examination of the BC/AE sheet using scanning electron microscopy revealed the 3D construction of nanofibrils, which showed high porosity. The BC/AE sheet exhibited water absorption at 74%, and the release of proteins in the AE reached 97.23% at 4 h. The BC sheet incorporated with proteins in the AE at 283.78 ± 7.7 µg/cm2 can promote the wound healing in streptozotocin-induced diabetic rats. The recovering skin in diabetic wounds treated with the BC/AE sheet exhibited a normal cell arrangement without fibrosis, as revealed by histological staining. The research findings indicate that the BC/AE sheet has potential for applications in wound dressings.

Homo- and Copolymer Hydrogels Based on N-Vinylformamide: An Investigation of the Impact of Water Structure on Controlled Release.

This study investigated the performance of novel hydrogels based on poly (N-vinylformamide) (PNVF), copolymers of NVF with N-hydroxyethyl acrylamide (HEA) (P(NVF-co-HEA)), and 2-carboxyethyl acrylate (CEA) (P(NVF-co-CEA)), which were synthesized by photopolymerization using a UVLED light source. The hydrogels were analyzed for important properties such as equilibrium water content (%EWC), contact angle, freezing and non-freezing water, and diffusion-based in vitro release. The results showed that PNVF had an extremely high %EWC of 94.57%, while a decreasing NVF content in the copolymer hydrogels led to a decrease in water content with a linear relationship with HEA or CEA content. Water structuring in the hydrogels showed appreciably more variance, with ratios of free to bound water differing from 16.7:1 (NVF) to 1.3:1 (CEA), corresponding to PNVF having ~67 water molecules per repeat unit. The release studies of different dye molecules followed Higuchi's model, with the amount of dye released from the hydrogels depending on the amount of free water and the structural interactions between the polymer and the molecule being released. The results suggest that PNVF copolymer hydrogels have potential for controlled drug delivery by altering the polymer composition to govern the amount and ratio of free to bound water contained in the hydrogels.

Beneficial Effects of a Blended Fibroin/Aloe Gel Extract Film on the Biomolecular Mechanism(s) via the MAPK/ERK Pathway Relating to Diabetic Wound Healing.

In diabetic patients, the process of wound healing is usually delayed or impaired. A diabetic environment could be associated with dermal fibroblast dysfunction, reduced angiogenesis, the release of excessive proinflammatory cytokines, and senescence features. Alternative therapeutic treatments using natural products are highly demanded for their high potential of bioactive activity in skin repair. Two natural extracts were combined to develop fibroin/aloe gel wound dressing. Our previous studies revealed that the prepared film enhances the healing rate of diabetic foot ulcers (DFUs). Moreover, we aimed to explore its biological effects and underlying biomolecular mechanisms on normal dermal, diabetic dermal, and diabetic wound fibroblasts. Cell culture experiments showed that the γ-irradiated blended fibroin/aloe gel extract film promotes skin wound healing by enhancing cell proliferation and migration, vascular epidermal growth factor (VEGF) secretion, and cell senescence prevention. Its action was mainly linked to the activation of the mitogen-activated protein kinases/extracellular signal-regulated kinase (MAPK/ERK) signaling pathway known to regulate various cellular activities, including proliferation. Therefore, the findings of this study confirm and support our previous data. The blended fibroin/aloe gel extract film displays a biological behavior with favorable properties for delayed wound healing and can be considered as a promising therapeutic approach in the treatment of diabetic nonhealing ulcers.

In Situ Compatibilized Blends of PLA/PCL/CAB Melt-Blown Films with High Elongation: Investigation of Miscibility, Morphology, Crystallinity and Modelling.

Ternary-blended, melt-blown films of polylactide (PLA), polycaprolactone (PCL) and cellulose acetate butyrate (CAB) were prepared from preliminary miscibility data using a rapid screening method and optical ternary phase diagram (presented as clear, translucent, and opaque regions) as a guide for the composition selection. The compositions that provided optically clear regions were selected for melt blending. The ternary (PLA/PCL/CAB) blends were first melt-extruded and then melt-blown to form films and characterized for their tensile properties, tensile fractured-surface morphology, miscibility, crystallinity, molecular weight and chemical structure. The results showed that the tensile elongation at the break (%elongation) of the ternary-blended, melt-blown films (85/5/10, 75/10/15, 60/15/25 of PLA/PCL/CAB) was substantially higher (>350%) than pure PLA (ca. 20%). The range of compositions in which a significant increase in %elongation was observed at 55−85% w/w PLA, 5−20% w/w PCL and 10−25% w/w CAB. Films with high %elongation all showed good interfacial interactions between the dispersed phase (PCL and CAB) and matrix (PLA) in FE-SEM and showed improvements in miscibility (higher intermolecular interaction and mixing) and a decrease in the glass transition temperature, when compared to the low %elongation films. The decrease in Mw and Mn and the formation of the new NMR peaks (1H NMR at 3.68−3.73 ppm and 13C NMR at 58.54 ppm) were observed in only the high %elongation films. These are expected to be in situ compatibilizers that are generated during the melt processing, mostly by chain scission. In addition, mathematical modelling was used to study the optimal ratio and cost-effectiveness of blends with optimised mechanical properties. These ternary-blended, melt-blown films have the potential for use in both packaging and medical devices with excellent mechanical performance as well as inherent economic and environmental capabilities.

Anti-Melanogenesis Activity of Crocodile (Crocodylus siamensis) White Blood Cell Extract on Ultraviolet B-Irradiated Melanocytes.

Ultraviolet (UV) radiation generates a range of biological effects in the skin, which includes premature skin aging, hyperpigmentation, and cancer. Therefore, the development of new effective agents for UV-related skin damage remains a challenge in the pharmaceutical industry. This study aims to test the inhibitory effect of crocodile white blood cell (cWBC) extract, a rich source of bioactive peptides, on ultraviolet B (UVB)-induced melanocyte pigmentation. The results showed that cWBC (6.25-400 µg/mL) could inhibit tyrosinase without adduct formation by 12.97 ± 4.20% on average. cWBC pretreatment (25-100 µg/mL) had no cytotoxicity and reduced intracellular melanin to 111.17 ± 5.20% compared with 124.87 ± 7.43 for UVB condition. The protective role of cWBC pretreatment against UVB was exhibited by the promotion of cell proliferation and the prevention of UVB-induced morphological change as observed from F actin staining. The decrease of microphthalmia-associated transcription factor expression levels after cWBC pretreatment might be a mechanism by which cWBC suppresses UVB-induced pigmentation. These results suggest that cWBC could be beneficial for the prevention of UVB-induced skin pigmentation.

The Development of a Physiologically Based Pharmacokinetic (PBPK) Model of Andrographolide in Mice and Scaling it up to Rats, Dogs, and Humans.

BACKGROUND: Andrographolide has a potent antiviral effect in the treatment of coronavirus disease (COVID-19). However, there are no in vivo studies of andrographolide as an anti-COVID-19 treatment. OBJECTIVE: The study aims to develop a physiologically based pharmacokinetic (PBPK) animal model and scale it up to a human model to predict andrographolide concentrations in the lungs. METHODS: ADAPT5 (version 5.0.58) was used to establish the PBPK model based on 24 enrolled pharmacokinetic studies. RESULTS: The perfusion-limited PBPK model was developed in mice and extrapolated to rats, dogs, and humans. The metabolism of andrographolide in humans was described by the Michaelis-Menten equation. The saturation of the metabolism occurred at a high dose (12 g), which could not be used therapeutically. The optimized oral bioavailability in humans was 6.3%. Due to the limit of solubility, the dose-dependent absorption between 20-1000 mg was predicted by GastroPlus®. Using the extrapolated human PBPK model together with the predicted dose-dependent fraction of the dose absorbed that enters the enterocytes by GastroPlus®, the oral dosage of 200 mg q8h of andrographolide would provide a trough level of free andrographolide at a steady state over the reported IC50 value against SARS-CoV-2 in the lungs for the majority of healthy humans. Based on the reported CC50 value, toxicity might not occur at the therapeutic dosage. CONCLUSION: The PBPK model of andrographolide in animals and humans was successfully constructed. Once additional data is available, the model would be needed to recalibrate to gain an understanding of a dose-response relationship and optimization of dosage regimens of andrographolide.

Evaluation of the safety and healing potential of a fibroin-aloe gel film for the treatment of diabetic foot ulcers.

OBJECTIVE: This study aimed to develop a wound dressing prepared from the blending of silkworm fibroin and aloe gel extract for use in the treatment of diabetic foot ulcers (DFUs). METHODS: Fibroin extracted from silkworm cocoons and aloe gel extract were dissolved in deionised water. pH levels were then adjusted with lactic acid solution. A simple casting technique was used to obtain the fibroin-aloe gel film. The surface morphology, hardness, flexibility and infrared spectrum of the sterilised film were tested. Swelling ratio was measured from changes in weight. The cytocompatibility of the film to human dermal fibroblast was determined using XTT assay. Hard-to-heal DFUs (grade I Wagner score) were treated with the film for four weeks. The application site was assessed for allergic reactions and/or sensitisation. Wound size was measured using standardised digital photography. RESULTS: A total of five hard-to-heal DFUs were treated. The obtained film sterilised with ozonation showed a non-porous structure. The elongation at break and tensile strength of the wet film were 9.00±0.95% and 6.89±1.21N, respectively. Fourier-transform infrared spectroscopy data indicated the presence of amides I, II and III, of peptide linkage, which are the chemical characteristics of the fibroin. Functional groups relating to healing activity of the aloe gel extract were also found. The swelling ratio of the film immersed in water for 24 hours was 0.8±0.01. In three DFUs (40-50mm2 in size), a wound area reduction of 0.4-0.8mm2/day was observed and were healed in 2-3 weeks. The remaining two SFUs (500mm2 in size) showed a wound area reduction of 4mm2/day and were almost closed at four weeks. No allergic reaction or infection was observed in any of the wounds. CONCLUSION: The obtained film showed a non-porous structure, and its strength and flexibility were adequate for storage and handling. The film tended to increase the proliferation of fibroblasts. The wound dressing showed potential for accelerating the healing rate of DFUs.

Safety assessment on comedogenicity of dermatological products containing d-alpha tocopheryl acetate in Asian subjects: A double-blind randomized controlled trial.

A double-blind randomized controlled trial was used to assess the comedogenic potential of the dermatological products containing d-Alpha tocopheryl acetate. A total of 15 healthy males (20-45 years old) with prominent follicular orifices and the ability to form comedones on the upper aspect of the back were enrolled. Each participant was given pads containing 4 test products. The positive control arm received a pad containing octyl palmitate which is a reported comedogenic material. The negative control arm received a pad without any test material. Participants were randomized to apply either the positive, negative or the active test cream to the application area for 4 weeks. Comedones were identified using epidermal biopsy under a stereomicroscope. The average number of microcomedone before exposure (baseline) with octyl palmitate was 6.1 ± 0.6 (mean ± SEM), and changed to 27.3 ± 4.7 which was more than 50% increase in comedone formation in every subject with the average change from base line was 365.4 ± 87.6%. In the negative control arm the average number of microcomedone at baseline was 6.4 ± 1.1 and at 4 week-application was 3.4 ± 0.6 (-43.0 ± 9.5% increased). All tested products produced less than a 50% increase in the number of microcomedones. Analyzed data from 12 subjects indicated non-comedogenic potential of the tested products containing-alpha tocopheryl acetate and other ingredients including lanolin, kernel oil and avocado oil and sunflower oil, etc. The octyl palmitate produced more than 50% increase in comedone formation in every analyzed subject.

Prevention by the Natural Artocarpin of Morphological and Biochemical Alterations on UVB-Induced HaCaT Cells.

Natural substances have gained considerable attention for skin protection against UV light reactions. Artocarpus altilis plant's heartwood extract is comprised of artocarpin as a major substance, already known for its interesting biological attributes as an antimicrobial, an anti-inflammatory, an antioxidant, and a melanogenesis inhibitor. The present work clarified the mechanism of natural artocarpin (NAR) with a purity of approximately 99% against the effects of UVB-induced HaCaT keratinocyte apoptosis. The indicated results showed that NAR suppresses free radical production (ROS and nitrite) and apoptosis-related molecule activation (caspase-3, p-p53, p-p38, and NF-κB p65) and secretion (TNF-α). Additionally, NAR prevented structural damages (nuclei condensation and fragmentation, apoptotic body formation, impaired cell adherence and round cell shape, disruption of F-actin filament, and clustering of cell death receptor CD95/Fas) and biophysical changes (plasma membrane rigidification). Thus, NAR acts directly from scavenging free radicals generated by UV and indirectly by suppressing morphological and biochemical UV-induced cell damages. Its biological effects are mainly attributed to antioxidant and antiapoptotic properties. Taken together, NAR could be considered as an effective natural product for photoprotective formulations.

Photoprotective Potential of the Natural Artocarpin against In Vitro UVB-Induced Apoptosis.

Apoptosis, a well-known pattern of programmed cell death, occurs in multicellular organisms not only for controlling tissue homeostasis but also for getting rid of severely damaged cells in order to protect the redundant growth of abnormal cells undergoing cancerous cells. The epidermis of the human skin, composed largely of keratinocytes (KCs), is renewed continuously. Therefore, KCs apoptosis plays a critical role in the maintenance of epidermis structure and function. However, regulated cell death can be disturbed by environmental factors especially ultraviolet radiation (UV) B, leading to the formation of sunburn cells (KCs undergoing UVB-induced apoptosis) and impairing the skin integrity. In the present study, we firstly reported the potential of the natural artocarpin (NAR) to regulate UVB-induced human KCs apoptosis. The NAR showed antilipid peroxidation with an IC50 value of 18.2 ± 1.6 µg/mL, according to TBARS assay while the IC50 value of trolox, a well-known antioxidant, was 7.3 ± 0.8 µg/mL. For cell-based studies, KCs were pretreated with 3.1 µg/mL of the NAR for 24 hr and then exposed to UVB at 55 mJ/cm2. Our data indicated that the NAR pretreatment reduces UVB-induced oxidative stress by scavenging free radicals and nitric oxide and therefore prevents reactive oxygen species (ROS) and reactive nitrogen species- (RNS-) mediated apoptosis. The NAR pretreatment has been shown also to reduce the UVB-induced cyclobutane pyrimidine dimer (CPD) lesions by absorbing UVB radiation and regulating the cell cycle phase. Additionally, the NAR pretreatment was found to modulate the expression of cleaved caspases-3 and 8 that trigger different signalling cascades leading to apoptosis. Thus, these results provide a basis for the investigation of the photoprotective effect of the NAR isolated from A. altilis heartwood and suggest that it can be potentially used as an agent against UVB-induced skin damages.

Evaluation of tyrosinase inhibitory activity and mechanism of Leucrocin I and its modified peptides.

This research first reports the tyrosinase inhibition and mechanism of Leucrocin I and its modified peptides (TILI-1 and TILI-2). Docking simulation showed that these peptides were predicted to bind and interact to active site of tyrosinase and exhibited the possibility to promote tyrosinase inhibition. Therefore, these peptides were synthesized, and their inhibitory activity was investigated. The results showed that the highest tyrosinase inhibition was achieved by TILI-2 followed by TILI-1 and Leucrocin I. A Lineweaver-Burk plot indicated that Leucrocin I exhibited mixed type characteristics, while its modified peptides exhibited competitive inhibition. Based on the greatest tyrosinase inhibition, TILI-2 was selected for further study. TILI-2 showed irreversible inhibition with two-step inactivation. Additionally, Leucrocin I and its modified peptides showed no toxicity toward B16F1 and HaCaT cells and decreased melanin and tyrosinase content in B16F1 cells. These results suggest that these peptides are promising peptides for the treatment of hyperpigmentation.

Evaluation of moisturizing and irritation potential of sacha inchi oil.

OBJECTIVE: The moisturizing and irritation effects of sacha inchi oil were evaluated. STUDY DESIGN: The moisturizing effect on the skin was clinically assessed using a regression study design. Sacha inchi oil or olive oil (benchmark) was applied on the left or right lower leg of the subjects for 14 days followed by application discontinuation for 2 days. The TEWL, skin moisture content and dryness appearance were observed. METHODS: The fatty acid composition and characteristics of cold-pressed sacha inchi seed oil were determined. Skin tissues cultured ex vivo were used to assess primary irritation induced by the oil by examining keratin 1 expression and TNF-α and IL-1α release from the oil-applied tissues. RESULTS: The sacha inchi oil contained 42.3% linolenic acid and 39.5% linoleic acid. This oil's saponification, iodine, acid and peroxide values were 168.58 ± 1.55 mg KOH/g, 203.00 ± 0.04 g I2 /100 g, 1.68 ± 0.03 mg KOH/g, and 1.95 ± 0.26 mEq peroxide/kg, respectively. Compared with nontreated skin tissues, induced secretion of TNF-α and IL-1α and disruption of keratin 1 integrity in the stratum corneum layer were not found in the sacha inchi oil-treated tissues. In a clinical study with 13 volunteers, the improvement in moisture content and skin dryness appearance at the sacha inchi oil-applied site was comparable with that observed at the olive oil-applied site. CONCLUSIONS: The sacha inchi oil was mild to the skin and benefited dry skin.

Antiacne and antiblotch activities of a formulated combination of Aloe barbadensis leaf powder, Garcinia mangostana peel extract, and Camellia sinensis leaf extract.

Objective: We compared the efficacy of an antiacne hydrogel formulated with a combination of Aloe barbadensis leaf extract, Garcinia mangostana peel extract, and Camellia sinensis leaf extract (AGC) at a ratio of 50:25:1 with a marketed 1% clindamycin gel (CG) formulation on antiacne and antiblotch activities. Methods: A single-center, parallel-arm, randomized controlled trial was performed from November 2017 to April 2018. Sixty subjects with mild-moderate acne severity according to the the American Academy of Dermatology were enrolled for the study. Outcome end points were total acne lesions (TALs) and acne-severity index (ASI) by counting the inflamed lesions and comedones and skin colors using erythema and melanin values. Results: For TALss, a decrease (P<0.0001) in the number of total inflamed lesions from baseline was evidenced in AGC group, but not in the CG group. Higher reduction in mean ASI in the AGC group was seen than in the CG group. However, there was no statistically significant difference regarding reduction in ASI between the AGC and CG groups. For erythema, a remarked reduction in skin redness from baseline was clearly seen at day 3 (P<0.05) in the AGC group. No significant decrease in erythema values from baseline was seen in the CG group. A significant decrease (P=0.037) in mean melanin value from baseline was seen in the AGC group after 14 days of twice-daily use, but not in the CG group. Both products were well tolerated, with no reports of severe adverse events. Conclusion: An anti-acne hydrogel containing a combination of mangosteen rinds, aloe vera gel, and green tea-leaf extracts was superior to 1% clindamycin gel in antiacne and antiblotch activities when measured by TALs and erythema and melanin values.

Effects of Repeated UVA Irradiation on Human Skin Fibroblasts Embedded in 3D Tense Collagen Matrix.

Skin photoaging is caused by cumulative UVA exposure that leads to dermal matrix alterations associated with impaired fibroblast functions. In this study, we evaluated the effects of repeated UVA irradiation on mechanically stressed fibroblasts which were embedded in 3D tense collagen matrix. By comparison to 2D monolayer culture, we investigated the expressions of alpha-smooth muscle actin (α-SMA) cytoskeleton and α2 subunit of integrin receptors, as well as the collagen metabolism, focusing to MMP-1 and collagen type-I expressions. We found that UVA exposure reduces collagen levels in both culture conditions. However, concerning integrin α2 and α-SMA expression, UVA irradiation had no effect on 2D culture, whereas in tense 3D culture, it had an inhibitory effect. In UVA-irradiated 3D culture, fibroblasts acquired elongated shape and lost their dynamic interaction with collagen fibers through a decrease in integrin α2 and α-SMA. Fibroblast responses to UVA irradiation were different in 2D versus 3D environment, highlighting the importance of collagen environment in the regulation of mechanical activities. The behavior of fibroblast upon mechanical stimulation closely mimics stressed extracellular environment. The model of UVA-irradiated fibroblasts cultured in tense 3D collagen gel illustrated the in vivo situation of both mechanically stressed and photoaged human skin.

An In Vitro Model for Fibroblast Photoaging Comparing Single and Repeated UVA Irradiations.

The current method for efficient evaluation of antiphotoaging compounds is an in vitro skin culture model using a single ultraviolet A (UVA) irradiation of fibroblasts. However, skin photoaging is caused by repeated exposure to UVA radiation. The objective of this study was to develop an appropriate model for in vitro skin photoaging by comparing the different effects of single (5 J cm-2 ) and repeated exposures (5 J cm-2 × 3 times) of fibroblasts to UVA irradiation. Our results demonstrated that a single and repeated exposure to UVA irradiation had different effects on fibroblasts. In the single UVA-irradiated group, collagen lattice contraction and the protein levels of type I procollagen and matrix metalloproteinase-1 (MMP-1) increased, while the levels of fibronectin and alpha-smooth muscle actin (α-SMA) were unchanged, compared to levels in the non-UVA-irradiated group (control). In contrast, repeated UVA exposure significantly induced G0/G1 cell cycle arrest, reduced collagen lattice contraction and type I procollagen and fibronectin expression, and increased MMP-1 expression. There was no difference in α-SMA expression when comparing repeatedly irradiated and non-UVA-irradiated fibroblasts. Our findings clearly indicate that repeated UVA irradiation of cells induces malfunctions found in photoaged skin and is an appropriate in vitro skin model of photoaging.