Pillared Carbon Membranes Derived from Cardo Polymers.

Carbon molecular sieve membranes (CMSMs) were prepared by carbonizing the high free volume polyimide BTDA-BAF that is obtained from the reaction of benzophenone-3,3',4,4'-tetracarboxylic dianhydride (BTDA) and 9,9-bis(4-aminophenyl) fluorene (BAF). The bulky cardo groups prevented a tight packing and rotation of the chains that leads to high permeabilities of their CMSMs. The incorporation of metal-organic polyhedra 18 (MOP-18, a copper-based MOP) in the BTDA-BAF polymer before pyrolysis at 550 °C prevented the collapse of the pores and the aging of the CMSMs. It was found that upon decomposition of MOP-18, a distribution of copper nanoparticles minimized the collapse of the graphitic sheets that formed the micropores and mesopores in the CMSM. The pillared CMSMs displayed CO2 and CH4 permeabilities of 12,729 and 659 Barrer, respectively, with a CO2/CH4 selectivity of 19.3 after 3 weeks of aging. The permselectivity properties of these membranes was determined to be at the 2019 Robeson upper bound. In contrast, the CMSMs from pure BTDA-BAF aged three times faster than the CMSMs from MOP-18/BTDA-BAF and exhibited lower CO2 and CH4 permeabilities of 5337 and 573 Barrer, respectively, with a CO2/CH4 selectivity of 9.3. The non-pillared CMSMs performed below the upper bound.

Carrier gas triggered controlled biolistic delivery of DNA and protein therapeutics from metal-organic frameworks.

The efficacy and specificity of protein, DNA, and RNA-based drugs make them popular in the clinic; however, these drugs are often delivered via injection, requiring skilled medical personnel, and producing biohazardous waste. Here, we report an approach that allows for their controlled delivery, affording either a burst or slow release without altering the formulation. We show that when encapsulated within zeolitic-imidazolate framework eight (ZIF-8), the biomolecules are stable in powder formulations and can be inoculated with a low-cost, gas-powered "MOF-Jet" into living animal and plant tissues. Additionally, their release profiles can be modulated through judicious selection of the carrier gas used in the MOF-Jet. Our in vitro and in vivo studies reveal that when CO2 is used, it creates a transient and weakly acidic local environment that causes a near-instantaneous release of the biomolecules through an immediate dissolution of ZIF-8. Conversely, when air is used, ZIF-8 biodegrades slowly, releasing the biomolecules over a week. This is the first example of controlled-biolistic delivery of biomolecules using ZIF-8, which provides a powerful tool for fundamental and applied science research.

Graphene-like Carbon from Calcium Hydroxide.

The development of inexpensive and environmentally friendly graphene-like carbon is critical for its integration into industrial products. This work highlights the production of graphene-like carbon structures from calcium hydroxide. The chemical vapor deposition conditions to grow graphitic carbon on a calcium hydroxide catalyst are reported. Acetylene, steam, and calcium hydroxide are used to grow a crumpled carbon morphology. The crumpled carbon resulted in a high surface area of 1276 m2/g and high electrical conductivity (>105 S/m). Additionally, the significance and origin of the C 1s X-ray photoelectron spectroscopy (XPS) π-π* plasmon loss peak as it is related to high electrical conductivity is reported. A unique mechanism for the catalytic process involving calcium acetylide is proposed. Several deposition times, steam concentration, and catalyst morphology were tested to synthesize a variety of carbon morphologies from calcium-based materials. Crumpled carbon, hollow nanospheres, bamboo-like carbon nanotubes, multi-walled carbon nanotubes, and graphene fiber morphologies were all formed using calcium-based catalysts. Multiple reaction conditions, a scaled reaction (300 g), and catalyst recyclability were investigated. Calcium-based materials were then used as catalysts for the growth of other graphene-like carbons.

Fluoro-Bridged Clusters in Rare-Earth Metal-Organic Frameworks.

The modulator 2-fluorobenzoic acid (2-fba) is widely used to prepare RE clusters in metal-organic frameworks (MOFs). In contrast to known RE MOF structures containing hydroxide bridging groups, we report for the first time the possible presence of fluoro bridging groups in RE MOFs. In this report we discuss the synthesis of a holmium-UiO-66 analogue as well as a novel holmium MOF, where evidence of fluorinated clusters is observed. The mechanism of fluorine extraction from 2-fba is discussed as well as the implications that these results have for previously reported RE MOF structures.

Characterization of a Holmium 4,4'-Biphenyldicarboxylate Metal-Organic Framework and Its Potential as a Holmium Carrier System.

There is growing interest in Holmium carriers for radiotherapeutic applications. In this work, a holmium-based metal-organic framework (MOF) using the 4,4'-biphenyldicarboxylic acid (H2BPDC) linker was synthesized and characterized to explore its potential as a radiotherapeutic carrier. The 3D MOF [Ho(BPDC)2]·(CH3)2NH2 was characterized by single crystal X-ray diffraction, FTIR, TGA and PXRD. A challenge to overcome in lanthanide-based MOFs is the deformation or collapse of the framework that can occur after evacuation of the pores. This structure displays high thermal stability and no collapse was observed when the molecules confined in the pores were removed. The coordination around the holmium center (CN = 8) is the key to this stability since only the organic linker and no solvent molecules coordinate to the metallic center. The porosity of the material was confirmed by high-pressure carbon dioxide (CO2) adsorption-desorption analysis. The stability of the MOF, its holmium content (28 wt%) and its porosity are features that make this material a potential holmium carrier for radiotherapeutic applications.

Transition from a 1D Coordination Polymer to a Mixed-Linker Layered MOF.

A novel copper(II) metal-organic framework (MOF) has been synthesized by modifying the reaction conditions of a 1D coordination polymer. The 1D polymer is built by the coordination between copper and 2,2'-(1 H-imidazole-4,5-diyl)di-1,4,5,6-tetrahydropyrimidine (H-L1). The geometry of H-L1 precludes its ability to form extended 3D framework structures. By adding 1,4-benzenedicarboxylic acid (H2BDC), a well-studied linker in MOF synthesis, we achieved the transition from a 1D polymer chain into porous 2D layered structures. Hydrogen bonding between L1 and BDC directs the parallel stacking of these layers, resulting in a 3D structure with one-dimensional channels accessible by two different pore windows. The preferred growth orientation of the crystal produces prolonged channels and a disparity in pore size distribution. This in turn results in slow diffusion processes in the material. Furthermore, an isoreticular MOF was prepared by substituting the BDC linker by 2,6-naphthalenedicarboxylic acid (H2NDC).