Direct Electrodeposition of Electrically Conducting Ni3(HITP)2 MOF Nanostructures for Micro-Supercapacitor Integration.

Micro-supercapacitors emerge as an important electrical energy storage technology expected to play a critical role in the large-scale deployment of autonomous microdevices for health, sensing, monitoring, and other IoT applications. Electrochemical double-layer capacitive storage requires a combination of high surface area and high electronic conductivity, with these being attained only in porous or nanostructured carbons, and recently found also in conducting metal-organic frameworks (MOFs). However, techniques for conformal deposition at micro- and nanoscale of these materials are complex, costly, and hard to upscale. Herein, the study reports direct, one step non-sacrificial anodic electrochemical deposition of Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 - Ni3(HITP)2, a porous and electrically conducting MOF. Employing this strategy enables the growth of Ni3(HITP)2 films on a variety of 2D substrates as well as on 3D nanostructured substrates to form Ni3(HITP)2 nanotubes and Pt@ Ni3(HITP)2 core-shell nanowires. Based on the optimal electrodeposition protocols, Ni3(HITP)2 films interdigitated micro-supercapacitors are fabricated and tested as a proof of concept.

Emulsion Liquid Membranes Based on Os-NP/n-Decanol or n-Dodecanol Nanodispersions for p-Nitrophenol Reduction.

Membrane materials with osmium nanoparticles have been recently reported for bulk membranes and supported composite membrane systems. In the present paper, a catalytic material based on osmium dispersed in n-decanol (nD) or n-dodecanol (nDD) is presented, which also works as an emulsion membrane. The hydrogenation of p-nitrophenol (PNP) is carried out in a reaction and separation column in which an emulsion in the acid-receiving phase is dispersed in an osmium nanodispersion in n-alcohols. The variables of the PNP conversion process and p-aminophenol (PAP) transport are as follows: the nature of the membrane alcohol, the flow regime, the pH difference between the source and receiving phases and the number of operating cycles. The conversion results are in all cases better for nD than nDD. The counter-current flow regime is superior to the co-current flow. Increasing the pH difference between the source and receiving phases amplifies the process. The number of operating cycles is limited to five, after which the regeneration of the membrane dispersion is required. The apparent catalytic rate constant (kapp) of the new catalytic material based on the emulsion membrane with the nanodispersion of osmium nanoparticles (0.1 × 10-3 s-1 for n-dodecanol and 0.9 × 10-3 s-1 for n-decanol) is lower by an order of magnitude compared to those based on adsorption on catalysts from the platinum metal group. The advantage of the tested membrane catalytic material is that it extracts p-aminophenol in the acid-receiving phase.

Laser Therapy Effects on Periodontal Status: A Randomized Study Using Gaussian Network Analysis and Structural Equation Modeling Approach.

Background and Objectives: This paper aims to assess the role of laser therapy in periodontitis through an innovative approach involving computational prediction and advanced modeling performed through network analysis (Gaussian graphical models-GGMs) and structural equations (SEM). Materials and Methods: Forty patients, exhibiting periodontal pockets with a minimum depth of 5 mm, were randomly divided into two groups: a control group and a laser group. Four specific indicators were measured for each tooth, namely periodontal pocket depth (PPD), clinical attachment level (CAL), bleeding on probing (BOP), and plaque index (PI), and the mean of six measured values was recorded at five time markers (baseline, 6 months, 1 year, 2 years, and 4 years). The assessment algorithm included enrollment, measurements, and differential non-surgical periodontal treatment, according to the group allocation. Scaling, root planing, and chlorhexidine 1% were conducted for the control group, and scaling, root planing and erbium, chromium:yttrium-scandium-gallium-garnet (Er,CR:YSGG) laser therapy were conducted for the laser group. Results: The main results highlight that the addition of laser treatment to scaling and root planing led to notable clinical improvements, decreasing the PPD values, reducing the BOP scores, and increasing the CAL. Conclusions: Notable relationships between the specific indicators considered were highlighted by both the GGMs and by SEM, thus confirming their suitability as proxies for the success of periodontal treatment.

Electrochemical Capacitance Traces with Interlayer Spacing in Two-dimensional Conductive Metal-Organic Frameworks.

Electrically conductive metal-organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double-layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure-function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene-based 2D layered conductive MOFs with variable alkyl functional groups, Ni3(HIR3-TAT)2 (TAT=triazatruxene; R=H, Et, n-Bu, n-Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in-plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double-layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni3(HIH3-TAT)2 to Ni3(HIBu3-TAT)2. Partial exfoliation of Ni3(HIBu3-TAT)2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox-active sites may motivate further design and engineering of electrode materials for EC.

Targeting of M2 macrophages with IL-13-functionalized liposomal prednisolone inhibits melanoma angiogenesis in vivo.

The intricate cooperation between cancer cells and nontumor stromal cells within melanoma microenvironment (MME) enables tumor progression and metastasis. We previously demonstrated that the interplay between tumor-associated macrophages (TAMs) and melanoma cells can be disrupted by using long-circulating liposomes (LCLs) encapsulating prednisolone phosphate (PLP) (LCL-PLP) that inhibited tumor angiogenesis coordinated by TAMs. In this study, our goal was to improve LCL specificity for protumor macrophages (M2-like (i.e., TAMs) macrophages) and to induce a more precise accumulation at tumor site by loading PLP into IL-13-conjugated liposomes (IL-13-LCL-PLP), since IL-13 receptor is overexpressed in this type of macrophages. The IL-13-LCL-PLP liposomal formulation was obtained by covalent attachment of thiolated IL-13 to maleimide-functionalized LCL-PLP. C57BL/6 mice bearing B16.F10 s.c melanoma tumors were used to investigate the antitumor action of LCL-PLP and IL-13-LCL-PLP. Our results showed that IL-13-LCL-PLP formulation remained stable in biological fluids after 24h and it was preferentially taken up by M2 polarized macrophages. IL-13-LCL-PLP induced strong tumor growth inhibition compared to nonfunctionalized LCL-PLP at the same dose, by altering TAMs-mediated angiogenesis and oxidative stress, limiting resistance to apoptosis and invasive features in MME. These findings suggest IL-13-LCL-PLP might become a promising delivery platform for chemotherapeutic agents in melanoma.

Water Quality and Associated Human Health Risk Assessment Related to Some Ions and Trace Elements in a Series of Rural Roma Communities in Transylvania, Romania.

This research aims to assess the content of some ions and trace elements in water sources in 24 rural Roma communities in Transylvania in order to assess the human health risk associated with exposure to such elements and ions. To this end, eight ions (F-, Cl-, Br-, NO2-, NO3-, SO42-, PO43-, NH4+) and ten trace elements (Cr, Ni, As, Pb, Cd, Mn, Cu, Zn, Fe, and Hg) were determined in 71 water samples by ion chromatography coupled with a conductivity detector for ions and atomic absorption spectrophotometry for all trace elements. General parameters were also determined. Non-conformity (as number of samples), according to the EU Drinking Water Directive, was observed as follows: pH (7), EC (7), hardness (1), oxidizability (15), Cl- (4), NO3- (30), SO42- (6), Fe (16), Mn (14), As (3), and Ni (1 sample). The incidence of ions was Cl- (71), SO42- (70), F- (67), NO3- (65), NH4+ (21), Br- (10), PO43-, and NO2- (1 sample) and for trace elements, Mn (59), Fe (50), As (38), Ni (32), Cu (29), Zn (28), Cd (12), Cr (11), and Pb (3 samples). Hg was not detected. Non-carcinogenic (HI) values exceeded one for As in 13 Roma communities, with higher values for children than for adults. For NO3-, the HI values were >1 in 12 for adults and 14 communities for children. The carcinogenic risk (CR) for As through ingestion ranged from 0.795 to 3.50 × 10-4 for adults and from 1.215 to 5.30 × 10-4 for children. CR by dermal contact was in the range of ×10-6 both for adults and children.

Experimental and simulation data for point-by-point wire arc additively manufactured carbon steel bars loaded in uniaxial tension.

Wire arc additive manufacturing is considered to allow a reduced material consumption for structural steel components by efficiently distributing the material only where necessary. Parts produced with this technology exhibit an irregular, imperfect geometry, which influences their structural behaviour. This paper describes a dataset, which includes geometry information for point-by-point wire arc additively manufactured steel bars, force and displacement measurements from performed uniaxial tensile tests on such bars, and force and displacement values from geometrically and materially non-linear simulations of the bars with imperfect geometry. The geometry data was obtained by 3D scanning the steel bars. Moreover, a script is provided that allows processing the scanned geometry data such that it can be used to generate suitable finite element meshes for geometrically and materially non-linear analyses. The force and displacement data from the uniaxial tensile tests were collected through measurements with a load cell for the force and with the help of digital image correlation measurements for the displacements. The non-linear simulations of the experiments were conducted with the computer aided engineering software Abaqus on processed approximations of the irregular scanned geometry. The described dataset can be used for better understanding the influence of the irregular geometry on the structural behaviour of wire arc additively manufactured parts. Moreover, researchers can apply the data to validate finite element simulation models and approaches for predicting the structural behaviour of different wire arc additively manufactured parts.

Simultaneously Recovery of Thorium and Tungsten through Hybrid Electrolysis-Nanofiltration Processes.

The recovery and recycling of metals that generate toxic ions in the environment is of particular importance, especially when these are tungsten and, in particular, thorium. The radioactive element thorium has unexpectedly accessible domestic applications (filaments of light bulbs and electronic tubes, welding electrodes, and working alloys containing aluminum and magnesium), which lead to its appearance in electrical and electronic waste from municipal waste management platforms. The current paper proposes the simultaneous recovery of waste containing tungsten and thorium from welding electrodes. Simultaneous recovery is achieved by applying a hybrid membrane electrolysis technology coupled with nanofiltration. An electrolysis cell with sulphonated polyether-ether-ketone membranes (sPEEK) and a nanofiltration module with chitosan-polypropylene membranes (C-PHF-M) are used to carry out the hybrid process. The analysis of welding electrodes led to a composition of W (tungsten) 89.4%; Th 7.1%; O2 2.5%; and Al 1.1%. Thus, the parameters of the electrolysis process were chosen according to the speciation of the three metals suggested by the superimposed Pourbaix diagrams. At a constant potential of 20.0 V and an electrolysis current of 1.0 A, the pH is varied and the possible composition of the solution in the anodic workspace is analyzed. Favorable conditions for both electrolysis and nanofiltration were obtained at pH from 6 to 9, when the soluble tungstate ion, the aluminum hydroxide, and solid thorium dioxide were formed. Through the first nanofiltration, the tungstate ion is obtained in the permeate, and thorium dioxide and aluminum hydroxide in the concentrate. By adding a pH 13 solution over the two precipitates, the aluminum is solubilized as sodium aluminate, which will be found after the second nanofiltration in the permeate, with the thorium dioxide remaining integrally (within an error of ±0.1 ppm) on the C-PHF-M membrane.

Towards the 4 V-class n-type organic lithium-ion positive electrode materials: the case of conjugated triflimides and cyanamides.

Organic electrode materials have garnered a great deal of interest owing to their sustainability, cost-efficiency, and design flexibility metrics. Despite numerous endeavors to fine-tune their redox potential, the pool of organic positive electrode materials with a redox potential above 3 V versus Li+/Li0, and maintaining air stability in the Li-reservoir configuration remains limited. This study expands the chemical landscape of organic Li-ion positive electrode chemistries towards the 4 V-class through molecular design based on electron density depletion within the redox center via the mesomeric effect of electron-withdrawing groups (EWGs). This results in the development of novel families of conjugated triflimides and cyanamides as high-voltage electrode materials for organic lithium-ion batteries. These are found to exhibit ambient air stability and demonstrate reversible electrochemistry with redox potentials spanning the range of 3.1 V to 3.8 V (versus Li+/Li0), marking the highest reported values so far within the realm of n-type organic chemistries. Through comprehensive structural analysis and extensive electrochemical studies, we elucidate the relationship between the molecular structure and the ability to fine-tune the redox potential. These findings offer promising opportunities to customize the redox properties of organic electrodes, bridging the gap with their inorganic counterparts for application in sustainable and eco-friendly electrochemical energy storage devices.

A dicarbonate solvent electrolyte for high performance 5 V-Class Lithium-based batteries.

Rechargeable lithium batteries using 5 V positive electrode materials can deliver considerably higher energy density as compared to state-of-the-art lithium-ion batteries. However, their development remains plagued by the lack of electrolytes with concurrent anodic stability and Li metal compatibility. Here we report a new electrolyte based on dimethyl 2,5-dioxahexanedioate solvent for 5 V-class batteries. Benefiting from the particular chemical structure, weak interaction with lithium cation and resultant peculiar solvation structure, the resulting electrolyte not only enables stable, dendrite-free lithium plating-stripping, but also displays anodic stability up to 5.2 V (vs. Li/Li+), in additive or co-solvent-free formulation, and at low salt concentration of 1 M. Consequently, the Li | |LiNi0.5Mn1.5O4 cells using the 1 M LiPF6 in 2,5-dioxahexanedioate based electrolyte retain >97% of the initial capacity after 250 cycles, outperforming the conventional carbonate-based electrolyte formulations, making this, and potentially other dicarbonate solvents promising for future Lithium-based battery practical explorations.

Investigation of Epilobium hirsutum L. Optimized Extract's Anti-Inflammatory and Antitumor Potential.

Epilobium hirsutum L., commonly known as hairy willowherb, is a perennial herbaceous plant native to Europe and Asia. In Romania, the Epilobium genus includes 17 species that are used in folk medicine for various purposes. This study aimed to investigate the anti-inflammatory and antitumor potential of the optimized extract of Epilobium hirsutum (EH) in animal models. The first study investigated the anti-inflammatory properties of EH optimized extract and the model used was carrageenan-induced paw inflammation. Wistar rats were divided into three groups: negative control, positive control treated with indomethacin, and a group treated with the extract. Oxidative stress markers, cytokine levels, and protein expressions were assessed. The extract demonstrated anti-inflammatory properties comparable to those of the control group. In the second study, the antitumor effects of the extract were assessed using the tumor model of Ehrlich ascites carcinoma. Swiss albino mice with Ehrlich ascites were divided into four groups: negative, positive treated with cyclophosphamide (Cph), Group 3 treated with Cph and EH optimized extract, and Group 4 treated with extract alone. Samples from the ascites fluid, liver, and heart were analyzed to evaluate oxidative stress, inflammation, and cancer markers. The extract showed a reduction in tumor-associated inflammation and oxidative stress. Overall, the EH optimized extract exhibited promising anti-inflammatory and antitumor effects in the animal models studied. These findings suggest its potential as a natural adjuvant therapeutic agent for addressing inflammation and oxidative stress induced by different pathologies.

Lactobacillus rhamnosus probiotic treatment modulates gut and liver inflammatory pathways in a hepatocellular carcinoma murine model. A preliminary study.

BACKGROUND AND AIMS: Hepatocellular carcinoma (HCC) is a growing global concern with an increasing incidence rate. The intestinal microbiota has been identified as a potential culprit in modulating the effects of antitumoral drugs. We aimed to assess the impact of adding Lactobacillus rhamnosus probiotic to regorafenib in mice with HCC. METHODS: Cirrhosis and HCCs were induced in 56 male Swiss mice via diethylnitrosamine injection and carbon tetrachloride administration. Mice were divided into four groups: treated with vehicle (VC), regorafenib (Rego), L. rhamnosus probiotic, and a combination of regorafenib and probiotic (Rego-Pro). After 3 weeks of treatment, liver and intestinal fragments were collected for analysis. RESULTS: Regorafenib elevated gut permeability, an effect mitigated by probiotic intervention, which exhibited a notable correlation with reduced inflammation (p < 0.01). iNOS levels were also reduced by adding the probiotic with respect to the mice treated with regorafenib only (p < 0.001). Notably, regorafenib substantially increased IL-6, TNF-a and TLR4 in intestinal fragments (p < 0.01). The administration of the probiotic effectively restored IL-6 to its initial levels (p < 0.001). CONCLUSION: Reducing systemic and intestinal inflammation by administering L. rhamnosus probiotic may alleviate tumoral resistance and systemic adverse effects.

Evaluation of Total Hip Arthroplasty Performed from a Lateral Approach as Optimal Treatment for Femoral Neck Fractures in Elderly, Active Patients.

BACKGROUND: The aim of the study was to evaluate total hip arthroplasty in terms of clinical and functional outcomes, rate of complications and hospitalization, as a treatment of choice for displaced femoral neck fractures. MATERIALS AND METHODS: We retrospectively reviewed the data of 526 patients with THA operated on in our department between January 2017 and December 2021. Clinical examinations, functional outcome assessment and radiographic evaluation were performed during follow-up. Patients were evaluated at the following time points: postoperatively at 3 days, 6 weeks, 12 weeks and 1 year, and we recorded surgery related data, complications, Visual Analogue Scale pain score, Harris Hip Score, the Western Ontario McMaster Osteoarthritis Index, and range of motion. RESULTS: Low intraoperative blood loss, short surgical time, short hospitalization, early mobilization of the patient and a good range of motion testify that the modified direct lateral approach is a valuable procedure for the patients with THA. A VAS score evaluated at 3 days and 6 weeks indicated a very good overall postoperative experience. The HHS and Womac scores were evaluated at 6 weeks, 12 weeks and 1 year and showed excellent results. CONCLUSION: THA for active patients with a displaced fracture of the femoral neck is an excellent treatment option which provides lasting pain relief, a high level of function and very low rates of reoperation.

Betula pendula Leaf Extract Targets the Interplay between Brain Oxidative Stress, Inflammation, and NFkB Pathways in Amyloid Aß1-42-Treated Rats.

Alzheimer's disease (AD) is known as the primary and most common cause of dementia in the middle-aged and elderly population worldwide. Chemical analyses of B. pendula leaf extract (BPE), performed using spectrophotometric and chromatographic methods (LC/MS), revealed high amounts of polyphenol carboxylic acids (gallic, chlorogenic, caffeic, trans-p-coumaric, ferulic, and salicylic acids), as well as flavonoids (apigenin, luteolin, luteolin-7-O-glucoside, naringenin, hyperoside, quercetin, and quercitrin). Four groups of Wistar rats were used in this experiment (n = 7/group): control (untreated), Aß1-42 (2 µg/rat intracerebroventricular (i.c.v.), Aß1-42 + BPE (200 mg/Kg b.w.), and DMSO (10 µL/rat). On the first day, one dose of Aß1-42 was intracerebroventricularly administered to animals in groups 2 and 3. Subsequently, BPE was orally administered for the next 15 days to group 3. On the 16th day, behavioral tests were performed. Biomarkers of brain oxidative stress Malondialdehyde (MDA), (Peroxidase (PRx), Catalase (CAT), and Superoxid dismutase (SOD) and inflammation (cytokines: tumor necrosis factor -α (TNF-α), Interleukin 1ß (IL-1ß), and cyclooxygenase-2 (COX 2)) in plasma and hippocampus homogenates were assessed. Various protein expressions (Phospho-Tau (Ser404) (pTau Ser 404), Phospho-Tau (Ser396) (pTau Ser 396), synaptophysin, and the Nuclear factor kappa B (NFkB) signaling pathway) were analyzed using Western blot and immunohistochemistry in the hippocampus. The results show that BPE diminished lipid peroxidation and neuroinflammation, modulated specific protein expression, enhanced the antioxidant capacity, and improved spontaneous alternation behavior, suggesting that it has beneficial effects in AD.

Survival Analysis and Failure Modes of Total Hip Arthroplasty Using a Cemented Semi-Retentive Acetabular Cup.

To reduce the incidence of total hip revisions, there have been continuous efforts to enhance prosthetic materials and designs to optimize implant survival. A primary implant with a constrained acetabular component is often used to minimize the risk of dislocations even though this approach has some drawbacks as reported in the literature. To address these concerns, this study aimed to assess the survivorship and dislocation rate of a semi-retentive cemented acetabular cup when used as a primary implant. The specific cemented cup that we studied was not present in any study that we consulted, so to fill this gap, we conducted a retrospective examination of 527 cemented hip prostheses that utilized the semi-retentive cup between the years 2005 and 2012. We employed Cox multiple regression models for our statistical analysis. The revision due to dislocation occurred in 12.8% of all cases, with a lower incidence of 5% (14 cases) in age groups >70 years than in age groups <70 years (14%-32 cases) (p < 0.001). The survival rates of the semi-retentive cemented acetabular cup were 98.6% (520 cases) at 5 years and 92.2% (487 cases) at 10 years. The survival rates were significantly lower in women than men, with 1.9% (7 cases) toward 0% at 5 years and 8.1% (30 cases) toward 5% (7 cases) at 10 years (p = 0.002). The difference in failure rates between age groups over 70 years (2.3%-10 cases) and age groups under 70 years (11.5%-34 cases) was also statistically significant (p < 0.001). Our study indicates that the semi-constrained design may cause frequent damage to the polyethylene liner due to impingement and wear, which are the primary factors for failure. Also, this implant has a similar risk of revision due to dislocation as reported in studies and may be beneficial as a primary implant in elderly patients with low-demanding lifestyles, muscular insufficiency, and low compliance regarding hip prosthetic behavior, without a major effect on survivorship.

Controlling Charge Transport in 2D Conductive MOFs─The Role of Nitrogen-Rich Ligands and Chemical Functionality.

Two-dimensional electrically conducting metal-organic frameworks (2D-e-MOFs) have emerged as a class of highly promising functional materials for a wide range of applications. However, despite the significant recent advances in 2D-e-MOFs, developing systems that can be postsynthetically chemically functionalized, while also allowing fine-tuning of the transport properties, remains challenging. Herein, we report two isostructural 2D-e-MOFs: Ni3(HITAT)2 and Ni3(HITBim)2 based on two new 3-fold symmetric ligands: 2,3,7,8,12,13-hexaaminotriazatruxene (HATAT) and 2,3,8,9,14,15-hexaaminotribenzimidazole (HATBim), respectively, with reactive sites for postfunctionalization. Ni3(HITAT)2 and Ni3(HITBim)2 exhibit temperature-activated charge transport, with bulk conductivity values of 44 and 0.5 mS cm-1, respectively. Density functional theory analysis attributes the difference to disparities in the electron density distribution within the parent ligands: nitrogen-rich HATBim exhibits localized electron density and a notably lower lowest unoccupied molecular orbital (LUMO) energy relative to HATAT. Precise amounts of methanesulfonyl groups are covalently bonded to the N-H indole moiety within the Ni3(HITAT)2 framework, modulating the electrical conductivity by a factor of ∼20. These results provide a blueprint for the design of porous functional materials with tunable chemical functionality and electrical response.

Discovery of New Hydrazone-Thiazole Polyphenolic Antioxidants through Computer-Aided Design and In Vitro Experimental Validation.

Oxidative stress is linked to a series of diseases; therefore, the development of efficient antioxidants might be beneficial in preventing or ameliorating these conditions. Based on the structure of a previously reported compound with good antioxidant properties and on computational studies, we designed several catechol derivatives with enhanced antioxidant potential. The compounds were synthesized and physicochemically characterized, and their antioxidant activity was assessed through different antiradical, electron transfer and metal ions chelation assays, their electrochemical behavior and cytotoxicity were studied. The results obtained in the in vitro experiments correlated very well with the in silico studies; all final compounds presented very good antioxidant properties, generally superior to those of the reference compounds used. Similarly, the results obtained from studying the compounds' electrochemical behavior were in good agreement with the results of the antioxidant activity evaluation assays. Regarding the compounds' cytotoxicity, compound 7b had a dose-dependent inhibitory effect against all cell lines. In conclusion, through computer-aided design, we developed several catechol thiazolyl-hydrazones with excellent antioxidant properties, of which compound 7b, with two catechol moieties in its structure, exhibited the best antioxidant activity.

Thorium Removal, Recovery and Recycling: A Membrane Challenge for Urban Mining.

Although only a slightly radioactive element, thorium is considered extremely toxic because its various species, which reach the environment, can constitute an important problem for the health of the population. The present paper aims to expand the possibilities of using membrane processes in the removal, recovery and recycling of thorium from industrial residues reaching municipal waste-processing platforms. The paper includes a short introduction on the interest shown in this element, a weak radioactive metal, followed by highlighting some common (domestic) uses. In a distinct but concise section, the bio-medical impact of thorium is presented. The classic technologies for obtaining thorium are concentrated in a single schema, and the speciation of thorium is presented with an emphasis on the formation of hydroxo-complexes and complexes with common organic reagents. The determination of thorium is highlighted on the basis of its radioactivity, but especially through methods that call for extraction followed by an established electrochemical, spectral or chromatographic method. Membrane processes are presented based on the electrochemical potential difference, including barro-membrane processes, electrodialysis, liquid membranes and hybrid processes. A separate sub-chapter is devoted to proposals and recommendations for the use of membranes in order to achieve some progress in urban mining for the valorization of thorium.

Modular metallotecton for engineering permanently porous frameworks: supernumerary role of ancillary ion.

The formation of robust supramolecular frameworks built from hetero-polytopic metal complexes and interacting with different ancillary ions remains a long-standing and underexplored desire. Herein, the secondary sphere interaction chemistry of [Ru(5-oxido-6-hydroxy-1,10-phenanthroline)a(5,6-dihydroxy-1,10-phenanthroline)(3-a)]-(a-2) (1) (a = 1, 3) coordination ion is reported, where the π-conjugated phenanthroline ligands are functionalized with catecholate groups used as H-bond donors and ligands. The deprotonation of the catechols is found to control the overall charge stoichiometry in 1, acting as a metallotecton to interact with anions of different basicity (Cl- in 1.Cl and Br- in 1.Br) as well as with Li+ cations (in 1.Li+). These interactions lead to the formation of 2D porous honeycomb networks without any significant alteration in the molecular packing. This implies that the self-assembly process is controlled by complementary intermolecular non-covalent interactions making the choice of the ancillary ion insignificant. The robust porous structure of the frameworks is established by uptake of D2O and I2 molecules within the microporous channels. This work demonstrates that supramolecular frameworks appear as flexible candidates for applications in gas sorption, separation and chemical sensing.

Colorectal Cancer: From Risk Factors to Oncogenesis.

Colorectal cancer is the second leading cause of cancer-related mortality worldwide. Numerous pathophysiological mechanisms, such as abnormal cell proliferation, cell differentiation, resistance to apoptosis, invasion of structures adjacent to colorectal tumor cells, and distant metastasis, are involved in colorectal carcinogenesis. These processes are initiated by the complex interaction of a number of genetic and environmental factors, including sedentary lifestyle, obesity, alcohol consumption, smoking, or gut microbiota. Despite the significant progress achieved in the diagnostic and therapeutic management of patients with colorectal cancer, there has been recently a noteworthy increase in the incidence of colorectal cancer in individuals below the age of 50 years. Early-onset colorectal cancer has a different frequency of oncogenic mutations, a higher prevalence of mucinous histology, a distinct deoxyribonucleic acid (DNA) methylation profile, a more distal location, and lower survival rates. A significant improvement in the prognosis of these patients can be achieved through the detection and removal of modifiable risk factors, along with the implementation of personalized screening strategies for individuals at high risk for this malignancy. Furthermore, gaining comprehension of the pathophysiological mechanisms by which these risk factors contribute to the process of oncogenesis may facilitate the discovery of novel therapeutic targets.