Effect of "black carbon" on antimony accumulation in traffic-loaded topsoil.

Traffic-loaded areas have been of increasing concern due to the potential risk of carcinogenic pollutants, including antimony (Sb), which accumulates mostly in atmospheric particles (PM) and can interact with soil organic matter (Corg). The stability of Sb in topsoils was studied via the adsorption mechanism using standard soils and Corg-reach vehicle-produced particles as the unique source of "traffic" Sb. The mixed adsorbents were prepared from loamy sand and clay standard soils, and braking abrasion dust and diesel engine soot as Sb sources in atmospheric PM. Whereas the black carbon (BC), as part of Corg, disposes of exceptional adsorption properties compared to the other Corg, all adsorption experiments were performed identically on the adsorbents prepared from the original standard soils and Sb source materials and on the adsorbents prepared from the same materials annealed at 375 °C to ensure only BC participation in adsorption processes. The concentration of the Sb model solution corresponded to the average Sb content in rainwater from traffic-loaded localities. In addition to Sb, the Corg and iron (Fe) were monitored. The sorbability of Sb on the loamy sand soil mixtures increased up to 90% compared with the pure soil due to new active surface sites for Sb binding created due to the Corg added with the source material. The clay soil mixture containing 10 times more Corg compared with the loamy sand soil accumulated the Corg from the source material, which resulted in blocking active sites and a decline in Sb sorbability by up to 20%. The processes performed identically with original and annealed materials showed the same trends and confirmed the key role of BC and soil quality in the accumulation and stability of Sb in traffic-loaded topsoils. The participation of Fe in Sb surface interactions was not observed.

Particle lung deposited surface area (LDSAal) size distributions in different urban environments and geographical regions: Towards understanding of the PM2.5 dose-response.

Recent studies indicate that monitoring only fine particulate matter (PM2.5) may not be enough to understand and tackle the health risk caused by particulate pollution. Health effects per unit PM2.5 seem to increase in countries with low PM2.5, but also near local pollution sources (e.g., traffic) within cities. The aim of this study is to understand the differences in the characteristics of lung-depositing particles in different geographical regions and urban environments. Particle lung deposited surface area (LDSAal) concentrations and size distributions, along with PM2.5, were compared with ambient measurement data from Finland, Germany, Czechia, Chile, and India, covering traffic sites, residential areas, airports, shipping, and industrial sites. In Finland (low PM2.5), LDSAal size distributions depended significantly on the urban environment and were mainly attributable to ultrafine particles (<100 nm). In Central Europe (moderate PM2.5), LDSAal was also dependent on the urban environment, but furthermore heavily influenced by the regional aerosol. In Chile and India (high PM2.5), LDSAal was mostly contributed by the regional aerosol despite that the measurements were done at busy traffic sites. The results indicate that the characteristics of lung-depositing particles vary significantly both within cities and between geographical regions. In addition, ratio between LDSAal and PM2.5 depended notably on the environment and the country, suggesting that LDSAal exposure per unit PM2.5 may be multiple times higher in areas having low PM2.5 compared to areas with continuously high PM2.5. These findings may partly explain why PM2.5 seems more toxic near local pollution sources and in areas with low PM2.5. Furthermore, performance of a typical sensor based LDSAal measurement is discussed and a new LDSAal2.5 notation indicating deposition region and particle size range is introduced. Overall, the study emphasizes the need for country-specific emission mitigation strategies, and the potential of LDSAal concentration as a health-relevant pollution metric.

The Genotoxicity of Organic Extracts from Particulate Emissions Produced by Neat Gasoline (E0) and a Gasoline-Ethanol Blend (E15) in BEAS-2B Cells.

Emissions from modern gasoline engines represent an environmental and health risk. In this study, we aimed to compare the toxicity of organic compound mixtures extracted from particulate matter (PM extracts) produced by neat gasoline (E0) and a blend containing 15% ethanol (E15), which is offered as an alternative to non-renewable fossil fuels. Human lung BEAS-2B cells were exposed to PM extracts, and biomarkers of genotoxicity, such as DNA damage evaluated by comet assay, micronuclei formation, levels of phosphorylated histone H2AX, the expression of genes relevant to the DNA damage response, and exposure to polycyclic aromatic hydrocarbons (PAHs), were determined. Results showed that both PM extracts significantly increased the level of oxidized DNA lesions. The E0 extract exhibited a more pronounced effect, possibly due to the higher content of nitrated PAHs. Other endpoints were not substantially affected by any of the PM extracts. Gene expression analysis revealed mild but coordinated induction of genes related to DNA damage response, and a strong induction of PAH-inducible genes, indicating activation of the aryl hydrocarbon receptor (AhR). Our data suggest that the addition of ethanol into the gasoline diminished the oxidative DNA damage, but no effect on other genotoxicity biomarkers was observed. Activated AhR may play an important role in the toxicity of gasoline PM emissions.

The impact of extractable organic matter from gasoline and alternative fuel emissions on bronchial cell models (BEAS-2B, MucilAir™).

Air pollution caused by road traffic has an unfavorable impact on the environment and also on human health. It has previously been shown, that complete gasoline emissions lead to toxic effects in cell models originating from human airways. Here we focused on extractable organic matter (EOM) from particulate matter, collected from gasoline emissions from fuels with different ethanol content. We performed cytotoxicity evaluation, quantification of mucin and extracellular reactive oxygen species (ROS) production, DNA breaks detection, and selected gene deregulation analysis, after one and five days of exposure of human bronchial epithelial model (BEAS-2B) and a 3D model of the human airway (MucilAir™). Our data suggest that the longer exposure had more pronounced effects on the parameters of cytotoxicity and mucin production, while the impacts on ROS generation and DNA integrity were limited. In both cell models the expression of CYP1A1 was induced, regardless of the exposure period or EOM tested. Several other genes, including FMO2, IL1A, or TNF, were deregulated depending on the exposure time. In conclusion, ethanol content in the fuels did not significantly impact the toxicity of EOM. Biological effects were mostly linked to xenobiotics metabolism and inflammatory response. BEAS-2B cells were more sensitive to the treatment.

Transcription profiles in BEAS-2B cells exposed to organic extracts from particulate emissions produced by a port-fuel injection vehicle, fueled with conventional fossil gasoline and gasoline-ethanol blend.

Emissions from road traffic are among the major contributors to air pollution worldwide and represent a serious environmental health risk. Although traffic-related pollution has been most commonly associated with diesel engines, increasing evidence suggests that gasoline engines also produce a considerable amount of potentially hazardous particulate matter (PM). The primary objective of this study was to compare the intrinsic toxic properties of the organic components of PM, generated by a conventional gasoline engine fueled with neat gasoline (E0), or gasoline-ethanol blend (15 % ethanol, v/v, E15). Our results showed that while E15 has produced, compared to gasoline and per kg of fuel, comparable particle mass (µg PM/kg fuel) and slightly more particles by number, the organic extract from the particulate matter produced by E15 contained a larger amount of harmful polycyclic aromatic hydrocarbons (PAHs), as determined by the chemical analysis. To examine the toxicity, we monitored genome-wide gene expression changes in human lung BEAS-2B cells, exposed for 4 h and 24 h to a subtoxic dose of each PM extract. After 4 h exposure, numerous dysregulated genes and processes such as oxidative stress, lipid and steroid metabolism, PPARα signaling and immune response, were found to be common for both extract treatments. On the other hand, 24 h exposure resulted in more distinctive gene expression patterns. Although we identified several common modulated processes indicating the metabolism of PAHs and activation of aryl hydrocarbon receptor (AhR), E15 specifically dysregulated a variety of other genes and pathways related to cancer promotion and progression. Overall, our findings suggest that the ethanol addition to gasoline changed the intrinsic properties of PM emissions and increased the PAH content in PM organic extract, thus contributing to a more extensive toxic response particularly after 24 h exposure in BEAS-2B cells.

In vitro exposure to complete engine emissions - a mini-review.

Outdoor air pollution is classified as carcinogenic to humans and exposure to it contributes to increased incidence of various diseases, including cardiovascular, neurological or pulmonary disorders. Vehicle engine emissions represent a significant part of outdoor air pollutants, particularly in large cities with high population density. Considering the potentially negative health impacts of engine emissions exposure, the application of reliable test systems allowing assessment of the biological effects of these pollutants is crucial. The exposure systems should use relevant, preferably multicellular, cell models that are treated with the complete engine exhaust (i.e. a realistic mixture of particles, chemical compounds bound to them and gaseous phase) at the air-liquid interface. The controlled delivery and characterization of chemical and/or particle composition of the exhaust should be possible. In this mini-review we report on such exposure systems that have been developed to date. We focus on a brief description and technical characterization of the systems, and discuss the biological parameters detected following exposure to a gasoline/diesel exhaust. Finally, we summarize and compare findings from the individual systems, including their advantages/limitations.

Effects of braking conditions on nanoparticle emissions from passenger car friction brakes.

Automobile friction brakes generate, in addition to coarse particles generated by mechanical processes, highly variable amount of nanoparticles from high temperature processes. The effects of braking conditions - speed, deceleration rate, brake rotor temperatures - on nanoparticle production were investigated here, aiming to provide practical guidance for reducing emissions through driving style and traffic management. Typical brake pads and a rotor from a common passenger car were subjected, on a brake dynamometer, to three runs of the WLTP brake cycle developed for brake wear particle measurements. Additionally, four sets of common brake pads were subjected to those parts of standardized brake performance tests believed to be reasonably realistic for common driving. Particle size distributions (5.6-560 nm electric mobility diameter, without removal of volatiles) show a dominant peak at 10 nm commensurate to the severity of braking and a non-linear increase of the total particle number at higher braking powers and higher total energy dissipated. The average emissions for three runs of the WLTP brake cycle were 3.3 × 1010 particles/km, while the harshest deceleration, 175-100 km/h at 5.28 m·s-2, has produced 8.4 to 38 × 1013 particles, corresponding to 2.5-11.5 thousands of km of WLTP-like driving. While previous studies have correlated higher PN production with higher average brake rotor temperature, a more complex relationship between nanoparticle emissions and a combination of initial rotor temperature, total energy dissipated and braking power has been observed here. From a driver behavior and regulatory perspective, it appears limiting harsh braking and braking from high speeds, possibly through improved driving practices, road design and traffic management, may potentially reduce brake wear nanoparticles. From the measurement perspective, it appears that "off-cycle" braking, even if relatively infrequent, may be associated with exponentially higher emissions and non-negligible share of the total emissions, and therefore should not be neglected.

Markers of lipid oxidation and inflammation in bronchial cells exposed to complete gasoline emissions and their organic extracts.

Road traffic emissions consist of gaseous components, particles of various sizes, and chemical compounds that are bound to them. Exposure to vehicle emissions is implicated in the etiology of inflammatory respiratory disorders. We investigated the inflammation-related markers in human bronchial epithelial cells (BEAS-2B) and a 3D model of the human airways (MucilAir™), after exposure to complete emissions and extractable organic matter (EOM) from particles generated by ordinary gasoline (E5), and a gasoline-ethanol blend (E20; ethanol content 20% v/v). The production of 22 lipid oxidation products (derivatives of linoleic and arachidonic acid, AA) and 45 inflammatory molecules (cytokines, chemokines, growth factors) was assessed after days 1 and 5 of exposure, using LC-MS/MS and a multiplex immunoassay, respectively. The response observed in MucilAir™ exposed to E5 gasoline emissions, characterized by elevated levels of pro-inflammatory AA metabolites (prostaglandins) and inflammatory markers, was the most pronounced. E20 EOM exposure was associated with increased levels of AA metabolites with anti-inflammatory effects in this cell model. The exposure of BEAS-2B cells to complete emissions reduced lipid oxidation, while E20 EOM tended to increase concentrations of AA metabolite and chemokine production; the impacts on other inflammatory markers were limited. In summary, complete E5 emission exposure of MucilAir™ induces the processes associated with the pro-inflammatory response. This observation highlights the potential negative health impacts of ordinary gasoline, while the effects of alternative fuel are relatively weak.

Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface.

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.

On-road detection of trucks with high NOx emissions from a patrol vehicle with on-board FTIR analyzer.

Technological advances in heavy-duty vehicle engines, allowing them to reach NOx emissions comparable to European diesel passenger cars per km driven, are being compromised by aftermarket defeat devices such as selective catalytic reduction (SCR) emulators, many of which can be quickly deactivated by the driver. In a pilot study, the prevalence of trucks with excess NOx emissions on Czech motorways was evaluated using an ordinary Customs Administration patrol vehicle temporarily fitted with a portable fast-response Fourier Transform Infra Red (FTIR) analyzer, acting as an impromptu chase vehicle. The Euro emissions category of the truck was provided from the motorway toll collection transponders. A total of 222 unique trucks were measured during a one-week pilot project. Of these, 66% were Euro VI, 25% were Euro V, and 9% were older categories. NO/CO2 ratios were calculated as a ratio of numerical integrals of the peaks of measured concentrations, as a ratio of maximum measured concentrations, and by linear regression, with the regression approach yielding most realistic results and mean calculated error of 0.2 g/kWh NO. At assumed 85% NO in NOx and 634 g/kWh mean CO2 emissions, the mean emissions of the cleanest 83% of Euro V and cleanest 63% of Euro VI trucks were within the corresponding NOx limit (2 g/kWh for Euro V, 0.46 g/kWh for Euro VI) multiplied by a factor of 1.5. Providing for some allowance for legitimate occurrences of high NOx emissions, about 10-15% of Euro V and about 10-25% of Euro VI trucks are believed to be excess emitters, with no SCR functionality on about 10-15% of Euro VI trucks. The portable FTIR, temporarily mounted on a law enforcement vehicle, can be readily used as a screening tool, identifying vehicles to be stopped for additional inspection, but also during roadside emissions inspections.

The Biological Effects of Complete Gasoline Engine Emissions Exposure in a 3D Human Airway Model (MucilAirTM) and in Human Bronchial Epithelial Cells (BEAS-2B).

The biological effects induced by complete engine emissions in a 3D model of the human airway (MucilAirTM) and in human bronchial epithelial cells (BEAS-2B) grown at the air-liquid interface were compared. The cells were exposed for one or five days to emissions generated by a Euro 5 direct injection spark ignition engine. The general condition of the cells was assessed by the measurement of transepithelial electrical resistance and mucin production. The cytotoxic effects were evaluated by adenylate kinase (AK) and lactate dehydrogenase (LDH) activity. Phosphorylation of histone H2AX was used to detect double-stranded DNA breaks. The expression of the selected 370 relevant genes was analyzed using next-generation sequencing. The exposure had minimal effects on integrity and AK leakage in both cell models. LDH activity and mucin production in BEAS-2B cells significantly increased after longer exposures; DNA breaks were also detected. The exposure affected CYP1A1 and HSPA5 expression in MucilAirTM. There were no effects of this kind observed in BEAS-2B cells; in this system gene expression was rather affected by the time of treatment. The type of cell model was the most important factor modulating gene expression. In summary, the biological effects of complete emissions exposure were weak. In the specific conditions used in this study, the effects observed in BEAS-2B cells were induced by the exposure protocol rather than by emissions and thus this cell line seems to be less suitable for analyses of longer treatment than the 3D model.

The genotoxicity of organic extracts from particulate truck emissions produced at various engine operating modes using diesel or biodiesel (B100) fuel: A pilot study.

An analysis of the toxic effects of emissions should reflect real traffic conditions. The exhaust emissions of particulate matter from diesel engines strongly depend on their operating conditions, with low-speed, low-load "urban creep" conditions, common for truck traffic in heavily congested urban areas, being one of the worst. We aimed to detect the genotoxicity of organic extracts from particulate matter in the exhaust of the diesel engine Zetor 1505 running on diesel and biodiesel (B100) fuels at characteristic modes of extended "urban creep", typical for transit truck traffic in Prague, comparing the first 5 min of idling with extended (20-80 min) idling, full load after idle, "stabilized" full load, and 30% load. The diluted exhaust was sampled with high volume samplers on glass fiber fluorocarbon coated filters. The filters were extracted with dichloromethane and DNA damage was analyzed in A549 cells using comet assay, with the inclusion of formamidopyrimidine DNA glycosylase (FPG) and endonuclease III (ENDOIII) to recognize oxidized DNA bases. The cells were exposed to extractable organic matter (EOM) for 4 and 24 h at non-cytotoxic dose corresponding to 0.001 m3 of undiluted exhaust gas per ml cell media. At the 4 h exposure interval, all samples from B100 and diesel emissions induced DNA damage. EOM from the extended idle engine mode exerted the strongest genotoxic effect for both fuels. Twenty hours later, the cells exposed to diesel EOM exhibited a further increase of DNA strand breaks compared to the preceding interval. In contrast, DNA damage seemed to be fully repaired in cells treated with EOM derived from biodiesel B100. The preliminary results suggest that (i) diesel emissions are more genotoxic than the emissions from B100, (ii) biodiesel induced DNA lesions are repaired within 24 h.

Comparison of hydrogenated vegetable oil and biodiesel effects on combustion, unregulated and regulated gaseous pollutants and DPF regeneration procedure in a Euro6 car.

The effects of traditional biodiesel (fatty acid methyl-esters, FAME) and a hydrotreated vegetable oil (HVO) were comprehensively investigated on a production Euro 6 diesel car, including fuel injection rate and timing, combustion analysis, emissions of regulated and unregulated pollutants, and regeneration of the diesel particle filter. The use of both biofuels is a part of the efforts to reduce emissions of greenhouse gases and health-relevant pollutants and to improve energy security and sustainability. HVO, albeit more expensive, offers benefits relative to FAME in terms of oxidation stability, injector fouling, energy content and cetane number. The car was fitted with an on-board instrumentation and subjected to a range of driving cycles on a chassis dynamometer. The fuel consumption calculated from instantaneous emissions data based on exhaust gas composition measured by an on-board FTIR and calculated exhaust flow matched directly measured fuel consumption within several percent on all fuels; differences in the consumption among the fuels correspond to different heating values. The combustion onset and maximum heat release rate were comparable for diesel and FAME but were advanced on HVO due to its higher cetane number, causing, at times, multiple distinct heat release peaks, suggesting that optimization of fuel injection timing for HVO might be beneficial. Emissions of methane and ammonia were negligible, of N2O were measurable and slightly lower for HVO than for other fuels, of formaldehyde were limited to cold engine accelerations and highest for FAME and negligible for HVO, of NO and NO2 were high on all fuels during all operating conditions except for the type approval test. The results confirm several relative advantages of HVO over RME, with penetration into engine lubricating oil during particle filter regeneration to be further investigated. The effects of HVO lubricity and other long-term effects were not evaluated here.

Content of metals in emissions from gasoline, diesel, and alternative mixed biofuels.

The use of alternative fuels or biofuel blends could be a way to reduce the environmental burden of increasing traffic. The aim of this study was to compare emissions from conventional fuels and alternative biofuels for diesel and spark-ignition engines under comparable conditions, i.e., using the World Harmonized Transient Cycle for a heavy-duty diesel engine and the Artemis CADC driving cycle for automobiles powered by gasoline and alternative fuels. Total contents of Ba, Ce, Cd, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn were determined in emissions, fuels, and lubricating oils. In addition, the bioaccessibility of metals in emissions was also assessed by extraction in water and in simulated lung fluid (Gamble's solution). Total particulate mass emissions, expressed per kilogram of fuel, and total contents of metals were higher for the diesel engine than for spark-ignition engines. The highest metal contents in emissions from diesel and gasoline fuels were found for Fe, Zn, and Cu. Fe and Cu in emissions from diesel and spark-ignition engines declined with the addition of bio-components in fuels. However, there was no significant decrease in the contents of other metals in emissions from biofuels. The highest degrees of bioaccessibility were observed for Ba, Zn, Cd, and V in emissions from diesel and biodiesel (according to their solubility in water). On the basis of this study, the use of biodiesel (especially methylesters of rapeseed oil) can be recommended to reduce the total mass of particulate and metal emissions from diesel engines.

Transcriptional response to organic compounds from diverse gasoline and biogasoline fuel emissions in human lung cells.

Modern vehicles equipped with Gasoline Direct Injection (GDI) engine have emerged as an important source of particulate emissions potentially harmful to human health. We collected and characterized gasoline exhaust particles (GEPs) produced by neat gasoline fuel (E0) and its blends with 15% ethanol (E15), 25% n-butanol (n-But25) and 25% isobutanol (i-But25). To study the toxic effects of organic compounds extracted from GEPs, we analyzed gene expression profiles in human lung BEAS-2B cells. Despite the lowest GEP mass, n-But25 extract contained the highest concentration of polycyclic aromatic hydrocarbons (PAHs), while i-But25 extract the lowest. Gene expression analysis identified activation of the DNA damage response and other subsequent events (cell cycle arrest, modulation of extracellular matrix, cell adhesion, inhibition of cholesterol biosynthesis) following 4 h exposure to all GEP extracts. The i-But25 extract induced the most distinctive gene expression pattern particularly after 24 h exposure. Whereas E0, E15 and n-But25 extract treatments resulted in persistent stress signaling including DNA damage response, MAPK signaling, oxidative stress, metabolism of PAHs or pro-inflammatory response, i-But25 induced changes related to the metabolism of the cellular nutrients required for cell recovery. Our results indicate that i-But25 extract possessed the weakest genotoxic potency possibly due to the low PAH content.

On-road and laboratory emissions of NO, NO2, NH3, N2O and CH4 from late-model EU light utility vehicles: Comparison of diesel and CNG.

Exhaust emissions of eight Euro 6 light duty vehicles - two station wagons and six vans - half powered by diesel fuel and half by compressed natural gas (CNG) were examined using both chassis dynamometer and on-road testing. A portable on-board FTIR analyzer was used to measure concentrations of reactive nitrogen compounds - NO, NO2 and ammonia, of CO, formaldehyde, acetaldehyde and greenhouse gases CO2, methane and N2O. Exhaust flow was inferred from engine control unit data. Total emissions per cycle were compared and found to be in good agreement with laboratory measurements of NOX, CO and CO2 during dynamometer tests. On diesel engines, mean NOX emissions were 136-1070mg/km in the laboratory and 537-615mg/km on the road, in many cases nearly an order of magnitude higher compared to the numerical value of the Euro 6 limit. Mean N2O emissions were 3-19mg/km and were equivalent to several g/km CO2. The measurements suggest that NOX and N2O emissions from late-model European light utility vehicles with diesel engines are non-negligible and should be continuously assessed and scrutinized. High variances in NOX emissions among the tested diesel vehicles suggest that large number of vehicles should be tested to offer at least some insights about distribution of fleet emissions among vehicles. CNG engines exhibited relatively low emissions of NOX (12-186mg/km) and NH3 (10-24mg/km), while mean emissions of methane were 18-45mg/km, under 1g/km CO2 equivalent, and N2O, CO, formaldehyde and acetaldehyde were negligible. The combination of a relatively clean-burning fuel, modern engine technology and a three-way catalyst has resulted in relatively low emissions under the wide variety of operating conditions encountered during the tests. The on-board FTIR has proven to be a useful instrument capable of covering, with the exception of total hydrocarbons, essentially all gaseous pollutants of interest.

DNA Damage Potential of Engine Emissions Measured In Vitro by Micronucleus Test in Human Bronchial Epithelial Cells.

Internal combustion engine emissions belong among the major anthropogenic sources of air pollution in urban areas. According to the International Agency for Research on Cancer, there is sufficient evidence of the carcinogenicity of diesel exhaust in human beings. Although alternative fuels, mainly biodiesel, have recently become popular, little is still known about the genotoxicity of emissions from these fuels. We analysed DNA damage expressed as the frequency of micronuclei (MN) in human bronchial epithelial cells (BEAS-2B), induced by extractable organic matter (EOM; tested concentrations: 1, 10 and 25 µg/ml) obtained from particle emissions from various blends of biodiesel with diesel fuels (including neat diesel fuel (B0), a blend of 70% B0 and 30% biodiesel (B30) and neat biodiesel (B100)). We also tested the effect of selected diesel exhaust organic/genotoxic components [benzo[a]pyrene (B[a]P) concentrations: 25, 100 and 200 µM; 1-nitropyrene (1-NP) concentrations: 1, 5 and 10 µM; 3-nitrobenzanthrone (3-NBA) concentrations: 1, 5 and 50 µM]. The cells were treated with the compounds for 28 and 48 hr. Our results showed that most of the tested compounds (except for the 25 µM B[a]P, 28-hr treatment) significantly increased MN frequency. The genotoxicity of EOMs from the engine emissions of diesel and biodiesel engines was comparable. Both nitro-PAH compounds demonstrated higher genotoxic potential in comparison with B[a]P. Considering our results and due to increasing popularity of alternative fuels, it is prudent that the potential genotoxic effects of various fuels are investigated across engine technologies and operating conditions in a relevant model system.

Comparative Analysis of Toxic Responses of Organic Extracts from Diesel and Selected Alternative Fuels Engine Emissions in Human Lung BEAS-2B Cells.

This study used toxicogenomics to identify the complex biological response of human lung BEAS-2B cells treated with organic components of particulate matter in the exhaust of a diesel engine. First, we characterized particles from standard diesel (B0), biodiesel (methylesters of rapeseed oil) in its neat form (B100) and 30% by volume blend with diesel fuel (B30), and neat hydrotreated vegetable oil (NEXBTL100). The concentration of polycyclic aromatic hydrocarbons (PAHs) and their derivatives in organic extracts was the lowest for NEXBTL100 and higher for biodiesel. We further analyzed global gene expression changes in BEAS-2B cells following 4 h and 24 h treatment with extracts. The concentrations of 50 µg extract/mL induced a similar molecular response. The common processes induced after 4 h treatment included antioxidant defense, metabolism of xenobiotics and lipids, suppression of pro-apoptotic stimuli, or induction of plasminogen activating cascade; 24 h treatment affected fewer processes, particularly those involved in detoxification of xenobiotics, including PAHs. The majority of distinctively deregulated genes detected after both 4 h and 24 h treatment were induced by NEXBTL100; the deregulated genes included, e.g., those involved in antioxidant defense and cell cycle regulation and proliferation. B100 extract, with the highest PAH concentrations, additionally affected several cell cycle regulatory genes and p38 signaling.

FTIR analysis of surface functionalities on particulate matter produced by off-road diesel engines operating on diesel and biofuel.

Fourier transform infrared spectroscopy is applied as a powerful analytic technique for the evaluation of the chemical composition of combustion aerosols emitted by off-road engines fuelled by diesel and biofuels. Particles produced by burning diesel, heated rapeseed oil (RO), RO with ethylhexylnitrate, and heated palm oil were sampled from exhausts of representative in-use diesel engines. Multicomponent composition of diesel and biofuel particles reveal the chemistry related to a variety of functional groups containing carbon, hydrogen, oxygen, sulfur, and nitrogen. The most intensive functionalities of diesel particles are saturated C-C-H and unsaturated C=C-H aliphatic groups in alkanes and alkenes, aromatic C=C and C=C-H groups in polyaromatics, as well as sulfates and nitrated ions. The distinguished features of biofuel particles were carbonyl C=O groups in carboxylic acids, ketones, aldehydes, esters, and lactones. NO2, C-N and -NH groups in nitrocompounds and amines are found to dominate biofuel particles. Group identification is confirmed by complementary measurements of organic carbon (OC), elemental carbon, and water-soluble ion species. The relationship between infrared bands of polar oxygenated and non-polar aliphatic functionalities indicates the higher extent of the surface oxidation of biofuel particles. Findings provide functional markers of organic surface structure of off-road diesel emission, allowing for a better evaluation of relation between engine, fuel, operation condition, and particle composition, thus improving the quantification of environmental impacts of alternative energy source emissions.

Genotoxic potential of organic extracts from particle emissions of diesel and rapeseed oil powered engines.

The present study was performed to identify possible genotoxicity induced by organic extracts from particulate matter in the exhaust of two typical diesel engines run on diesel fuel and neat heated fuel-grade rapeseed oil: a Cummins ISBe4 engine tested using the World Harmonized Steady State Test Cycle (WHSC) and modified Engine Steady Cycle (ESC) and a Zetor 1505 engine tested using the Non-Road Steady State Cycle (NRSC). In addition, biodiesel B-100 (neat methylester of rapeseed oil) was tested in the Cummins engine run on the modified ESC. Diluted exhaust was sampled with high-volume samplers on Teflon coated filters. Filters were extracted with dichlormethane (DCM) and DNA adduct levels induced by extractable organic matter (EOM) in an acellular assay of calf thymus DNA coupled with (32)P-postlabeling in the presence and absence of rat liver microsomal S9 fraction were employed. Simultaneously, the chemical analysis of 12 priority PAHs in EOM, including 7 carcinogenic PAHs (c-PAHs) was performed. The results suggest that diesel emissions contain substantially more total PAHs than rapeseed oil emissions (for the ESC) or that these concentrations were comparable (for the WHSC and NRSC), while c-PAHs levels were comparable (for the ESC) or significantly higher (for the WHSC and NRSC) for rapeseed oil emissions. DNA adduct levels induced by diesel and rapeseed oil derived EOM were comparable, but consistently slightly higher for diesel than for rapeseed oil. Highly significant correlations were found between 12 priority PAHs concentrations and DNA adduct levels (0.980; p<0.001) and these correlations were even stronger for c-PAHs (0.990; p<0.001). Metabolic activation by the microsomal S9 fraction resulted in several fold higher genotoxicity, suggesting a major contribution of PAHs to genotoxicity. Directly acting compounds, other than c-PAHs, and not requiring S9 to exhibit DNA reactivity were also significant. Generally, DNA adduct levels were more dependent on the type of engine and the test cycle than on the fuel. Our findings suggest that the genotoxicity of particulate emissions from the combustion of rapeseed oil is significant and is comparable to that from the combustion of diesel fuel. A more detailed study is ongoing to verify and extent these preliminary findings.