Halogenated indigo dyes: a likely source of 1,3,6,8-tetrabromocarbazole and some other halogenated carbazoles in the environment.

In recent years, a number of halogenated carbazoles have been detected in environmental samples. These emerging contaminants have been shown to be persistent and possess dioxin-like toxicological potential. The goal of this research was to examine the literature to determine likely anthropogenic origin(s) of halogenated carbazoles in the environment. The scientific literature indicated a number of pathways by which 1,3,6,8-tetrabromocarbazole could form in the manufacture of 5,5',7,7'-tetrabromoindigo. The U.S. production history of 5,5',7,7'-tetrabromoindigo correlates well with the concentration rise, decline, and disappearance of 1,3,6,8-tetrabromocarbazole in dated Lake Michigan sediments. Additionally, other halogenated carbazoles that have been found in environmental sediments can be explained by the production of other halogenated indigo dyes. 1,8-dibromo-3,6-dichlorocarbazole can be accounted for by the manufacture of 7,7'-dibromo-5,5'-dichloroindigo, while 1,3,6,8-tetrachlorocarbazole was found at relatively high concentration near the outfall of a U.S. manufacturer of 5,5',7,7'-tetrachloroindigo. Carbazoles containing an iodo-substituent can be explained by the use of iodine as a catalyst in the manufacture of halogenated indigo dyes. 3,6-Dichlorocarbazole measured in soils and dibromocarbazoles measured in more recently deposited sediments are not easily rationalized on the basis of an indigo related source and may be related to other anthropogenic sources or natural origins.

Hydrogen-bonded organic semiconductor micro- and nanocrystals: from colloidal syntheses to (opto-)electronic devices.

Organic pigments such as indigos, quinacridones, and phthalocyanines are widely produced industrially as colorants for everyday products as various as cosmetics and printing inks. Herein we introduce a general procedure to transform commercially available insoluble microcrystalline pigment powders into colloidal solutions of variously sized and shaped semiconductor micro- and nanocrystals. The synthesis is based on the transformation of the pigments into soluble dyes by introducing transient protecting groups on the secondary amine moieties, followed by controlled deprotection in solution. Three deprotection methods are demonstrated: thermal cleavage, acid-catalyzed deprotection, and amine-induced deprotection. During these processes, ligands are introduced to afford colloidal stability and to provide dedicated surface functionality and for size and shape control. The resulting micro- and nanocrystals exhibit a wide range of optical absorption and photoluminescence over spectral regions from the visible to the near-infrared. Due to excellent colloidal solubility offered by the ligands, the achieved organic nanocrystals are suitable for solution processing of (opto)electronic devices. As examples, phthalocyanine nanowire transistors as well as quinacridone nanocrystal photodetectors, with photoresponsivity values by far outperforming those of vacuum deposited reference samples, are demonstrated. The high responsivity is enabled by photoinduced charge transfer between the nanocrystals and the directly attached electron-accepting vitamin B2 ligands. The semiconducting nanocrystals described here offer a cheap, nontoxic, and environmentally friendly alternative to inorganic nanocrystals as well as a new paradigm for obtaining organic semiconductor materials from commercial colorants.

25th anniversary article: progress in chemistry and applications of functional indigos for organic electronics.

Indigo and its derivatives are dyes and pigments with a long and distinguished history in organic chemistry. Recently, applications of this 'old' structure as a functional organic building block for organic electronics applications have renewed interest in these molecules and their remarkable chemical and physical properties. Natural-origin indigos have been processed in fully bio-compatible field effect transistors, operating with ambipolar mobilities up to 0.5 cm(2) /Vs and air-stability. The synthetic derivative isoindigo has emerged as one of the most successful building-blocks for semiconducting polymers for plastic solar cells with efficiencies > 5%. Another isomer of indigo, epindolidione, has also been shown to be one of the best reported organic transistor materials in terms of mobility (∼2 cm(2) /Vs) and stability. This progress report aims to review very recent applications of indigoids in organic electronics, but especially to logically bridge together the hereto independent research directions on indigo, isoindigo, and other materials inspired by historical dye chemistry: a field which was the root of the development of modern chemistry in the first place.

A facile protection-deprotection route for obtaining indigo pigments as thin films and their applications in organic bulk heterojunctions.

Indigo and its derivatives are industrially-important dyes known for centuries. The low solubility of these compounds limits their applications and hinders potential synthetic chemistry using indigo as a building-block. Herein we report attachment of the tert-butoxy carbonyl (tBOC) thermolabile protecting group to indigos, allowing their processing into neat thin films as well as mixed films with a semiconducting polymer. Photoinduced charge transfer is observed to and from these pigments and the polymer.

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors.

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C60 as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm2/Vs. Devices with pentacene showed a mobility of 0.16 cm2/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ∼0.3 cm2/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.

Characterization of the excited states of indigo derivatives in their reduced forms.

A comprehensive characterization of the electronic spectral and photophysical properties of the leuco (reduced) form of several indigo derivatives, including indigo and Tyrian Purple, with di-, tetra-, and hexa-substitution, was obtained in solution. The characterization involves absorption, fluorescence, and triplet-triplet absorption spectra, together with quantitative measurements of quantum yields of fluorescence, phi(F) (0.46-0.04), intersystem crossing, phi(Tau) (0.013-0.034), internal conversion, phi(IC), and the corresponding lifetimes. The position and degree of substitution promote differences in the spectral and photophysical properties displayed by the investigated leuco derivatives. The phi(F) values are about two orders of magnitude higher than those previously obtained for the corresponding keto forms. Also in contrast with the behavior found for the keto forms, the S(1) approximately approximately -->T(1) intersystem crossing is an efficient route for the excited-state deactivation channel. These findings strengthen the fact that, in contrast to keto indigo where the internal conversion dominates the deactivation of the excited-state, with leuco indigo (and derivatives), the excited state deactivation involves competition between internal conversion, triplet state formation, and fluorescence. A time-resolved investigation of one of the compounds in glycerol showed the presence of a photoisomerization process.

Spectral and photophysical studies of substituted indigo derivatives in their keto forms.

The spectral and photophysical properties of indigo derivatives with di-, tetra-, and hexa-substitution in their neutral (keto) form are investigated in solution. The study comprises absorption and emission spectra, together with quantitative measurements of quantum yields of fluorescence (phi(F)) and singlet oxygen formation (phi(Delta)) and fluorescence lifetimes. The energy difference between the HOMO and LUMO orbitals is dependent on the degree (number of groups) and relative position of substitution. The phi(F) and phi(Delta) values were found to be very low S(0) internal conversion yields and thus, with the other data, to determine the rate constants for all decay processes. From these, several conclusions are drawn. Firstly, the radiationless rate constants, k(NR) , clearly dominate over the radiative rate constants, k(F) , (and processes). Secondly, the main deactivation channel for the compounds in their keto form is the radiationless S(1) approximately approximately -->S(0) internal conversion process. Finally, although the changes are relatively small, internal conversion yield seems to be independent of the overall pattern of substitution. A more detailed investigation of the decay profiles with collection at the blue and red emission of the fluorescence band of indigo and one di-substituted indigo reveals the decays to be bi-exponential and that at longer emission wavelengths these appear to be associated with both rise and decay times indicating that two excited species exist, which is consistent with a keto-excited form giving rise (by fast proton transfer) to the enol-form of indigo. Evidence is presented which supports the idea that intramolecular (and possibly some intermolecular) proton transfer can explain the high efficiency of internal conversion in indigo.

Optochemical sensor for determining ozone based on novel soluble indigo dyes immobilised in a highly permeable polymeric film.

An optochemical ozone sensor is described that has been manufactured by immobilisation of novel soluble indigo derivatives in permeable transparent polymeric films of polydimethylsiloxane-polycarbonate copolymer. From a number of investigated indigo derivatives, 4,4',7,7'-tetraalkoxyindigo 9 has been selected for optimal sensitivity and specificity of ozone detection. A linear calibration for ozone can be obtained in the range between 0.01 and 0.5 ppm. The limit of quantitation is 0.03 ppm, and the accuracy exceeds 8%. It takes about 134 s to measure the relatively low occupational exposure concentration of 0.1 ppm. A reduction of the sensor response time could be achieved through application of double-sided coated sensors instead of single-sided variants. The stability of the sensors and the effect of external parameters like relative humidity (RH), temperature and gas flow on the sensor response have been investigated. The sensor response is affected by varying the gas flow or temperature; however, humidity in the range between 0 and 90% RH does not affect sensor response. The indigo derivative 9 remained stable inside the polymeric film and no chemical reaction, crystallisation or leaching occurred during 10 months of observation. Proper choice of indicator dye and polymeric material and successful application of kinetic evaluation method for the exposure experiments determine the desired features of the sensor.