Selective electrodialysis for nutrient recovery and pharmaceutical removal from liquid digestate: Pilot-scale investigation and potential fertilizer production.

The present research employs a pilot-scale selective electrodialysis system to treat liquid digestate, fractionating nutrient ions and exploring fertilizer creation via ammonia stripping and phosphorus precipitation, while studying pharmaceutical transport behavior and examining membrane fouling. The influence of diverse potentials was studied in simulated and real digestate, with 30 V application proven more efficient overall. Applying consecutive runs resulted in products that were 7.9, 7.4, 1.7, 5.3, and 6 times more concentrated compared to the feed solution for NH4+, K+, PO43-, Ca2+, and Mg2+, respectively. Pharmaceuticals analysis showed that ciprofloxacin was completely retained in the liquid digestate, while ibuprofen was detected in the anionic product. Diclofenac was initially present in the digestate but was undetectable in the final products, suggesting it adhered to the membrane. Membranes showed inorganic and organic fouling. The monovalent cation exchange membrane had severe salt scaling, showing calcium and magnesium deposits, and fewer functional groups.

Inkjet-Printed LSM-YSZ Thin Films for Enhanced Oxygen Electrodes in Solid Oxide Fuel Cells.

In the present work, symmetrical oxide ion conducting solid oxide single cells with inkjet-printed composite LSM-YSZ electrodes, onto commercially available YSZ dense substrates using GDC as buffer interlayer, were fabricated and characterized. Stable inkjet-printable LSM-YSZ nanoparticle inks were developed based on water solvent, after processing with high intensity ball milling. The deposition of LSM-YSZ electrodes was performed by inkjet printing, as well as a conventional additive manufacturing technique, screen printing, in order to compare the electrochemical performance of the produced cells for the reversible charge transfer reaction (O2 + 4 e- ↔ 2 O2-). The physicochemical properties of the LSM-YSZ nanoparticle ink was investigated to determine ink printability. The electrochemical performance of fabricated inkjet-printed and screen printed symmetrical cells (LSM-YSZ | GDC | YSZ | GDC | LSM-YSZ) exposed under a synthetic air atmosphere was evaluated in a single chamber cell reactor, employing the AC impedance spectroscopy and linear scan voltammetry techniques, at the temperature range of 700-850 °C. The inkjet-printed electrodes exhibited highly homogeneous and porous morphologies with the corresponding cell achieving current densities almost five times higher, up to 1 A/cm2 at 2 V cell potential and 850 °C, than those of the equivalent screen-printed one. To the best of our knowledge, this is the first successful implementation of water-based inks of LSM-YSZ electrodes in the fabrication of inkjet-printed solid oxide cells.

Treatment of anaerobically digested pig manure by applying membrane processes for nutrient recovery and antibiotics removal.

A combination of membrane processes was applied to treat the digestate produced after the anaerobic treatment of pig manure in a biogas plant, aiming towards the recovery of nutrients and effective water treatment for potential reuse. Initially, coarse filtration (sieving and microfiltration) was used to remove particles larger than 1 µm, followed by ultrafiltration, to reduce the suspended solids concentrations below 1 g/L. Subsequently, selective electrodialysis is employed to recover the main nutrient ions, primarily ammonium and potassium. The ion-depleted digestate is then fed to a reverse osmosis unit, where clean water was recovered, yielding a by-product (concentrate) stream enriched in phosphates and organics content. The presence of antibiotics and the concentrations of heavy metals were monitored during all treatment stages to assess their behavior/removal in the various membrane processes. The results indicate that almost 51% of the digestate could be recovered as water free from ions and antibiotics, suitable for reuse in the biogas plant for process needs and irrigation purposes. The selective electrodialysis process can recover 51% of initial NH4+ content (corresponding to 96% of the electrodialysis feed), while the remainder largely ended up in the ultrafiltration concentrate. A similar behavior was observed for the case of K+, while approximately 68% of the phosphates content was retained by the coarse filtration process, with another 24% remaining in the ultrafiltration concentrate and the remaining 8% in the reverse osmosis concentrate. Most of the antibiotics and heavy metals were retained by the coarse and ultrafiltration steps, with smaller amounts detected in the reverse osmosis concentrate.

Nutrient recovery from digestate: Pilot test experiments.

A series of technologies have been employed in pilot-scale to process digestate, i.e. the byproduct remaining after the anaerobic digestion of agricultural and other wastes, with the aim of recovering nutrients and reducing the load of solids and organics from it, hence improving the quality of digestate for potential subsequent reuse. In this case the digestate originated from a mixture of dairy and animal wastes and a small amount of agricultural wastes. It was processed by the application of several treatments, applied in series, i.e. microfiltration, ultrafiltration, reverse osmosis, selective electrodialysis and combined UV/ozonation. The initially applied membrane filtration methods (micro- and ultra-filtration) removed most of the suspended solids and macromolecules with a combined efficiency of more than 80%, while the reverse osmosis (at the end) removed almost all the remaining solutes (85-100%), producing sufficiently clarified water, appropriate for potential reuse. In the selective electrodialysis unit over 95% of ammonium and potassium were recovered from the feed, along with 55% of the phosphates. Of the latter, 75% was retrieved in the form of struvite.

Electrochemical Synthesis of Ammonia: Recent Efforts and Future Outlook.

Ammonia is a key chemical produced in huge quantities worldwide. Its primary industrial production is via the Haber-Bosch method; a process requiring high temperatures and pressures, and consuming large amounts of energy. In the past two decades, several alternatives to the existing process have been proposed, including the electrochemical synthesis. The present paper reviews literature concerning this approach and the experimental research carried out in aqueous, molten salt, or solid electrolyte cells, over the past three years. The electrochemical systems are grouped, described, and discussed according to the operating temperature, which is determined by the electrolyte used, and their performance is valuated. The problems which need to be addressed further in order to scale-up the electrochemical synthesis of ammonia to the industrial level are examined.