RESUMO
Geometrically necessary dislocations (GNDs) play a key role in accommodating strain incompatibility between neighboring grains in polycrystalline materials. One critical step toward accurately capturing GNDs in deformation models involves studying the microstructural features that promote GND accumulation and the resulting character of GND fields. This study utilizes high-resolution electron backscatter diffraction to map GND populations in a large polycrystalline sample of pure tantalum, under simple tension. A total of 1,989 grains, 3,518 grain boundaries (GBs), and 3,207 triple junctions (TJs) were examined in a subsurface region of the sample. Correlations between GND density and GB character, and to some extent, TJ character, are investigated. Statistical geometrical relationships between these entities are quantified, and also visualized, using a novel application of two-point statistics. The nature of GNDs across the sample is also visualized and assessed using a recently developed method of mapping the local net Burgers vectors. The different approaches to characterizing GND distribution are compared in terms of how they quantify the size of near boundary gradient zones.
RESUMO
Twin detection via EBSD can be particularly challenging due to the fine scale of certain twin types - for example, compression and double twins in Mg. Even when a grid of sufficient resolution is chosen to ensure scan points within the twins, the interaction volume of the electron beam often encapsulates a region that contains both the parent grain and the twin, confusing the twin identification process. The degradation of the EBSD pattern results in a lower image quality metric, which has long been used to imply potential twins. However, not all bands within the pattern are degraded equally. This paper exploits the fact that parent and twin lattices share common planes that lead to the quality of the associated bands not degrading; i.e. common planes that exist in both grains lead to bands of consistent intensity for scan points adjacent to twin boundaries. Hence, twin boundaries in a microstructure can be recognized, even when they are associated with thin twins. Proof of concept was performed on known twins in Inconel 600, Tantalum, and Magnesium AZ31. This method was then used to search for undetected twins in a Mg AZ31 structure, revealing nearly double the number of twins compared with those initially detected by standard procedures.
RESUMO
BACKGROUND: Teamwork is critical for patient and provider safety in high-stakes environments, including the setting of prehospital emergency medical services (EMS). OBJECTIVE: We sought to describe the components of team leadership and team membership on a single patient call where multiple EMS providers are present. METHODS: We conducted a two-day focus group with nine subject matter experts in crew resource management (CRM) and EMS using a structured nominal group technique (NGT). The specific question posed to the group was, "What are the specific components of team leadership and team membership on a single patient call where multiple EMS providers are present?" After round-robin submission of ideas and in-depth discussion of the meaning of each component, participants voted on the most important components of team leadership and team membership. RESULTS: Through the NGT process, we identified eight components of team leadership: a) creates an action plan; b) communicates; c) receives, processes, verifies, and prioritizes information; d) reconciles incongruent information; e) demonstrates confidence, compassion, maturity, command presence, and trustworthiness; f) takes charge; g) is accountable for team actions and outcomes; and h) assesses the situation and resources and modifies the plan. The eight essential components of team membership identified included: a) demonstrates followership, b) maintains situational awareness, c) demonstrates appreciative inquiry, d) does not freelance, e) is an active listener, f) accurately performs tasks in a timely manner, g) is safety conscious and advocates for safety at all times, and h) leaves ego and rank at the door. CONCLUSIONS: This study used a highly structured qualitative technique and subject matter experts to identify components of teamwork essential for prehospital EMS providers. These findings and may be used to help inform the development of future EMS training and assessment initiatives.
Assuntos
Gestão de Recursos da Equipe de Assistência à Saúde/métodos , Serviços Médicos de Emergência/métodos , Liderança , Equipe de Assistência ao Paciente , Adulto , Feminino , Grupos Focais , Humanos , Masculino , Pessoa de Meia-Idade , Pesquisa QualitativaRESUMO
Studies of dislocation density evolution are fundamental to improved understanding in various areas of deformation mechanics. Recent advances in cross-correlation techniques, applied to electron backscatter diffraction (EBSD) data have particularly shed light on geometrically necessary dislocation (GND) behavior. However, the framework is relatively computationally expensive-patterns are typically saved from the EBSD scan and analyzed offline. A better understanding of the impact of EBSD pattern degradation, such as binning, compression, and various forms of noise, is vital to enable optimization of rapid and low-cost GND analysis. This paper tackles the problem by setting up a set of simulated patterns that mimic real patterns corresponding to a known GND field. The patterns are subsequently degraded in terms of resolution and noise, and the GND densities calculated from the degraded patterns using cross-correlation ESBD are compared with the known values. Some confirmation of validity of the computational degradation of patterns by considering real pattern degradation is also undertaken. The results demonstrate that the EBSD technique is not particularly sensitive to lower levels of binning and image compression, but the precision is sensitive to Poisson-type noise. Some insight is also gained concerning effects of mixed patterns at a grain boundary on measured GND content.
RESUMO
High-resolution (or "cross-correlation") electron backscatter diffraction analysis (HR-EBSD) utilizes cross-correlation techniques to determine relative orientation and distortion of an experimental electron backscatter diffraction pattern with respect to a reference pattern. The integrity of absolute strain and tetragonality measurements of a standard Si/SiGe material have previously been analyzed using reference patterns produced by kinematical simulation. Although the results were promising, the noise levels were significantly higher for kinematically produced patterns, compared with real patterns taken from the Si region of the sample. This paper applies HR-EBSD techniques to analyze lattice distortion in an Si/SiGe sample, using recently developed dynamically simulated patterns. The results are compared with those from experimental and kinematically simulated patterns. Dynamical patterns provide significantly more precision than kinematical patterns. Dynamical patterns also provide better estimates of tetragonality at low levels of distortion relative to the reference pattern; kinematical patterns can perform better at large values of relative tetragonality due to the ability to rapidly generate patterns relating to a distorted lattice. A library of dynamically generated patterns with different lattice parameters might be used to achieve a similar advantage. The convergence of the cross-correlation approach is also assessed for the different reference pattern types.
RESUMO
INTRODUCTION: Since the inception of emergency medical services (EMS), individuals have assumed the role of "training officer" without a clear and concise description of the responsibilities inherent in this position. Furthermore, EMS system leaders rely heavily on these individuals to implement changes within an EMS system and to ensure the competency of practicing out-of-hospital professionals. The limited understanding of and research in training officer roles highlight the need for study in this area. OBJECTIVES: Specific objectives of our study were to describe demographic and work-life characteristics of training officers, estimate the number of hours spent on specific training officer tasks in a typical week, and determine methods of training officer appointment and education received after appointment. METHODS: This was a questionnaire-based cross-sectional census analysis of all training officers in the National Registry of Emergency Medical Technicians (NREMT) database. This questionnaire contained items related to demographics, work-life characteristics, and specific roles and responsibilities of training officers. Descriptive statistics, chi-square, and Mann-Whitney U tests were utilized to assess specific differences among training officers. RESULTS: Over 2,500 individuals responded to this questionnaire (2,528/4,956). The majority of the respondents were male (79.0%), held a full-time salaried position (64.9%), and were of nonminority status (93.4%). Individuals reported an overall median number of years worked in EMS of 19.0 (standard deviation [SD] = 8.7, range = 0-45) and a median of 4.0 years of serving as a training officer (SD = 5.1, range = 0-33), and planned to serve as a training officer for a median of 10.0 years (SD = 7.6, range = 0-50). The highest median numbers of hours spent on specific training officer tasks in a typical week were for providing patient care (median = 8.0, SD = 18.1); developing, delivering, and accounting for continuing education (median = 5.0, SD = 9.8); department administration (median = 5.0, SD = 12.8); and performing run reviews (median = 3.0, SD = 6.4). CONCLUSION: The role of the training officer in ensuring the continued competence of the EMS professional has not been delineated in this paper, and future efforts should seek to answer this research question. Key words: emergency medical services; training officers; system administration.