Feasibility of single-use 3D-printed instruments for total knee arthroplasty.

AIMS: This aim of this study was to assess the feasibility of designing and introducing generic 3D-printed instrumentation for routine use in total knee arthroplasty. MATERIALS AND METHODS: Instruments were designed to take advantage of 3D-printing technology, particularly ensuring that all parts were pre-assembled, to theoretically reduce the time and skill required during surgery. Concerning functionality, ranges of resection angle and distance were restricted within a safe zone, while accommodating either mechanical or anatomical alignment goals. To identify the most suitable biocompatible materials, typical instrument shapes and mating parts, such as dovetails and screws, were designed and produced. RESULTS: Before and after steam sterilization, dimensional analysis showed that acrylonitrile butadiene styrene could not withstand the temperatures without dimensional changes. Oscillating saw tests with slotted cutting blocks produced debris, fractures, or further dimensional changes in the shape of Nylon-12 and polymethylmethacrylate (MED610), but polyetherimide ULTEM 1010 was least affected. CONCLUSION: The study showed that 3D-printed instrumentation was technically feasible and had some advantages. However, other factors, such as whether all procedural steps can be accomplished with a set of 3D-printed instruments, the logistics of delivery, and the economic aspects, require further study. Cite this article: Bone Joint J 2019;101-B(7 Supple C):115-120.

Analysis of an early intervention tibial component for medial osteoarthritis.

Tibial component loosening is an important failure mode in unicompartmental knee arthroplasty (UKA) which may be due to the 6-8 mm of bone resection required. To address component loosening and fixation, a new early intervention (EI) design is proposed which reverses the traditional material scheme between femoral and tibial components. The EI design consists of a plastic inlay for the distal femur and a thin metal plate for the proximal tibia. With this reversed materials scheme, the EI design requires minimal tibial bone resection compared with traditional UKA. This study investigated, by means of finite element (FE) simulations, the advantages of a thin metal tibial component compared with traditional UKA tibial components, such as an all-plastic inlay or a metal-backed onlay. We hypothesized that an EI tibial component would produce comparable stress, strain, and strain energy density (SED) characteristics to an intact knee and more favorable values than UKA components, due primarily to the preservation of dense cancellous bone near the surface. Indeed, FE results showed that stresses in the supporting bone for an EI design were close to intact, while stresses, strains, and strain energy densities were reduced compared with an all-plastic UKA component. Analyzed parameters were similar for an EI and a metal-backed onlay, but the EI component had the advantage of minimal resection of the stiffest bone.

Reference axes for comparing the motion of knee replacements with the anatomic knee.

In the literature, different methods have been used to describe the motion of the anatomic knee and total knee replacements (TKR). The major goal of this study was to identify the most suitable methods for comparing TKR motion with that of the anatomic knee, whether for the purpose of developing new TKR designs, or evaluating existing ones. A further goal was to specify a testing methodology which would apply the methodology and represent a wide range of activities. Six knee specimens were tested in a Desktop Knee Machine, where different sequences of compressive, shear, and torque loads were applied at a full range of flexion angles. Data from a typical total knee was obtained by analysis. The motion results were displayed using different reference axes, specifically the circular axis, the epicondylar axis, the line joining the contact points, and the line joining the lowest lateral and medial femoral condylar points. It was concluded that the circular axis was the most generally applicable choice of a key femoral axis, for comparing the rigid body motion of a total knee with anatomic data, but that the actual contact points had important significance in full extension and in high flexion.

The Gerbich blood group system: a review.

Antigens in the Gebrich blood group system are expressed on glycophorin C (GPC) and glycophorin D (GPD), which are both encoded by a single gene, GYPC. The GYPC gene is located on the long arm of chromosome 2, and Gebrich antigens are inherited as autosomal dominant traits. There are 11 antigens in the Gebrich blood group system, six of high prevalence (Ge2, Ge3, Ge4, GEPL [Ge10*], GEAT [Ge11*], GETI [Ge12*]) and five of low prevalence (Wb [Ge5], Ls(a) [Ge6], An(a) [Ge7], Dh(a) [Ge8], GEIS [Ge9]). GPC and GPD interact with protein 4.1R, contributing stability to RBC membrane. Reduced levels of GPC and GPD are associated with hereditary elliptocytosis, and Gebrich antigens act as receptors for the malarial parasite Plasmodium falciparum. Anti-Ge2 and anti-Ge3 have caused hemolytic transfusion reactions, and anti-Ge3 has produced hemolytic disease of the fetus and newborn (HDFN).

Uncemented computer-assisted design-computer-assisted manufacture femoral components in revision total hip replacement: a minimum follow-up of ten years.

We prospectively evaluated the long-term outcome of 158 consecutive patients who underwent revision total hip replacement using uncemented computer-assisted design-computer-assisted manufacture femoral components. There were 97 men and 61 women. Their mean age was 63.1 years (34.6 to 85.9). The mean follow-up was 10.8 years (10 to 12). The mean Oxford, Harris and Western Ontario and McMaster hip scores improved from 41.1, 44.2 and 52.4 pre-operatively to 18.2, 89.3 and 12.3, respectively (p < 0.0001, for each). Six patients required further surgery. The overall survival of the femoral component was 97% (95% confidence interval 94.5 to 99.7). These results are comparable to those of previously published reports for revision total hip replacement using either cemented or uncemented components.

Uncemented custom computer-assisted design and manufacture of hydroxyapatite-coated femoral components: survival at 10 to 17 years.

We present the 10- to 17-year results of 112 computer-assisted design computer-assisted manufacture femoral components. The total hip replacements were performed between 1992 and 1998 in 111 patients, comprising 53 men and 58 women. Their mean age was 46.2 years (24.6 to 62.2) with a mean follow-up of 13 years (10 to 17). The mean Harris Hip Score improved from 42.4 (7 to 99) to 90.3 (38 to 100), the mean Oxford Hip Score from 43.1 (12 to 59) to 18.2 (12 to 51) and the mean Western Ontario MacMasters University Osteoarthritis Index score from 57.0 (7 to 96) to 11.9 (0 to 85). There was one revision due to failure of the acetabular component but no failures of the femoral component. There were no revisions for aseptic loosening. The worst-case survival in this cohort of custom femoral components at 13.2 years follow-up was 98.2% (95% confidence interval 95 to 99). Overall survival of this series of total hip replacements was 97.3% (95% confidence interval 95 to 99). These results are comparable with the best medium- to long-term results for femoral components used in primary total hip replacement with any means of fixation.

Future directions in knee replacement.

The use of artificial joints for the treatment of osteoarthritis is expected to expand considerably over the next decade. While newer technologies can offer yet further improvements in total knee systems, implementation will be strongly affected by the need to satisfy apparently competing requirements. Patients expect quicker rehabilitation, improved performance, and lifelong durability; on the other hand, economic constraints require a reduction in cost for each procedure, as well as early intervention and preventative measures, while there is increased pressure from health care systems to use evidence-based medicine as the standard of choice for implants and techniques. The success of a knee replacement depends on the design itself, the surgical technique, the rehabilitation, and, not least, the patient. The major goal of the implant design can be redefined as a restoration of normal knee mechanics, whether by maximum preservation of tissues, or by guiding surfaces that replace their function. Surgical technique needs to be less invasive but achieve optimal patient-specific alignment and soft tissue balancing. Rehabilitation procedures must achieve the expectations of realistic patients. Testing and evaluation methods need to be upgraded for enhanced predictability. This paper discusses current trends and future possibilities to address this expansive scope of design criteria.

Alloanti-c in a c-positive, JAL-positive patient.

BACKGROUND AND OBJECTIVES: In the Rh blood group system, partial D, C, and e antigens are well-known, but a partial c antigen resulting in the production of alloanti-c in a c+ individual is rare. One example of an alloanti-c in a c+ person was an anti-Rh26, which can appear as anti-c, and another was an alloanti-c in a c+ person with a presumed R(1)r phenotype. The finding of an apparent alloanti-c in a transfused c+ patient initiated this investigation. MATERIALS AND METHODS: Haemagglutination tests, DNA extraction, polymerase chain reaction (PCR)-based assays (PCR-restriction fragment length polymorphism, allele-specific PCR), reticulocyte mRNA extraction, reverse transcriptase (RT)-PCR and sequencing were performed by standard procedures. RESULTS: Plasma from a 64-year-old African American woman with a wound infection following a mastectomy contained anti-E, anti-S, anti-K, anti-Fy(a) and anti-Jk(b), reacting by the indirect antiglobulin test. In addition, the patient's plasma gave reactions that were consistent with an anti-c, while her pre-transfusion red blood cells typed c+ with some anti-c reagents. These results are consistent with a partial c antigen. The patient's red blood cells also typed V+(W)VS- and JAL+. Analyses of DNA and Rh-transcripts from this patient showed the presence of the following genes: RHD*D, RHD*DAU0, RHCE*Ce and RHCE*ce(S)(340). CONCLUSION: The nucleotide 340C>T change in RHCE exon 3 (predicted to encode 114Trp) of the RHCE*ce(S)(340) allele is associated with a JAL+ phenotype and the altered expression of the c, V and VS antigens. This alteration in the c antigen allowed the patient to make an alloanti-c. This case reveals that the RHCE*ce(S)(340) allele encodes a partial c antigen.

Optimizing for head height, head offset, and canal fit in a set of uncemented stemmed femoral components.

When inserting an uncemented hip stem, the objectives are to obtain a close fit of the stem in the canal and anatomic head placement. Our goals were to formulate a set of stems which would satisfy these two objectives, and to test the resulting templates on sequential radiographs of hip replacement patients. Using 98 cases for which a custom primary hip had been designed, thirteen dimensional parameters for a hip stem were defined, most importantly proximal medial width (PMW), proximal lateral width (PLW), head offset (HOF), head height (HHT), mid-stem diameter (BD), and distal diameter (DD). These parameters were analyzed in 155 patients' radiographs, and the resulting data were evaluated to obtain the optimal combinations of parameters. A 14-size stem system was defined and evaluated on the AP radiographs of 103 successive hip replacement patients. For each stem diameter between 11 and 17 mm, two pairs of PMW and PLW values, equivalent to 'varus' and 'valgus' shapes, provided the best fit for the population of radiographs. The template analysis showed that out of 103 cases, 93% of offsets were within 4mm of ideal, while 81% of heights were within 1mm of ideal, and 99% were within 4mm of the ideal. Canal fit was within 1.5mm in the proximal-medial Gruen Zone 7 in 58% of the cases. The dimensional parameters of the 14 size system enabled the close matching of the important dimensional parameters simultaneously. The error that did occur could largely be corrected by modular heads and by minor canal broaching. By providing two stem shape variations for each stem diameter, our system achieved an accurate head center position while simultaneously obtaining a sufficiently close fit in the canal.

A confusion in antibody identification: anti-D production after anti-hrB.

It is well known that certain combinations of alloantibodies are frequently found together. Patients with sickle cell disease (SCD) are mostly ofAfrican ancestry,and they may make anti-hrB. A transfusion of hrB- blood is often achieved by using e- (R2R2) RBCs; it is generally believed that hrB- patients readily make anti-E or a"broad-spectrum" anti-Rh34 (-HrB). We describe two multiply transfused D+ patients with SCD and a history of anti-hrB who subsequently produced anti- D. This raises the question whether anti-hrB together with anti-D is a more common antibody combination than anti-hrB with anti-E or anti-Rh34.

The use of hydroxyapatite-coated CAD-CAM femoral components in adolescents and young adults with inflammatory polyarthropathy: ten-year results.

Between June 1991 and January 1995, 42 hydroxyapatite-coated CAD-CAM femoral components were inserted in 25 patients with inflammatory polyarthropathy, 21 of whom had juvenile idiopathic arthritis. Their mean age was 21 years (11 to 35). All the patients were reviewed clinically and radiologically at one, three and five years. At the final review at a mean of 11.2 years (8 to 13) 37 hips in 23 patients were available for assessment. A total of four femoral components (9.5%) had failed, of which two were radiologically loose and two were revised. The four failed components were in patients aged 16 years or less at the time of surgery. Hydroxyapatite-coated customized femoral components give excellent medium- to long-term results in skeletally-mature young adults with inflammatory polyarthropathy. Patients aged less than 16 years at the time of surgery have a risk of 28.5% of failure of the femoral component at approximately ten years.

Measurements of constraint of total knee replacement.

Measurement of the constraint of total knee components in a test machine provides an objective method of describing the laxity and stability characteristics of the implant itself, independent of the knee joint into which it would be implanted. A special fixture was designed and fitted to a Bionix multi-channel loading machine. The test consisted of applying a compressive load, applying a cyclic AP force or internal-external torque, and measuring all of the displacements and rotations. Three different commonly-used TKR's showed widely different constraint characteristics. In the cyclic AP test, along with the cyclic AP displacement, displacements and rotations occurred in the other directions. This indicated that all degrees of freedom should be free to move, otherwise anomalous results would be obtained. The paper concludes with recommendations for standardized constraint tests.

Histological effects of tazarotene 0.1% cream vs. vehicle on photodamaged skin: a 6-month, multicentre, double-blind, randomized, vehicle-controlled study in patients with photodamaged facial skin.

BACKGROUND: Topical tazarotene has been shown to offer efficacy in ameliorating multiple effects of photodamage. OBJECTIVES: To evaluate the histological effects of tazarotene cream on photodamaged skin. METHODS: In this multicentre, double-blind, randomized, vehicle-controlled study, 50 patients with photodamaged facial skin (at least mild fine wrinkling and mottled hyperpigmentation, with at least one of these being moderate) were randomized to apply tazarotene 0.1% cream or vehicle cream to their face, once daily for 24 weeks. RESULTS: Blinded assessments showed that tazarotene was less likely than vehicle to be associated with an increase in keratinocytic and melanocytic atypia, and more likely than vehicle to be associated with a reduction in atypia. Between-group comparisons in distribution of change from baseline categories of severity were in favour of tazarotene (P = 0.055 for keratinocytic atypia, P = 0.034 for melanocytic atypia, and P < 0.001 for the number of granular cell layers). Compared with vehicle, tazarotene was associated with an increase in epidermal polarity (P = 0.008) and epidermal thickness (P = 0.012), and a tendency for stratum corneum compaction. Tazarotene was also associated with widened intercellular spaces (reported as epidermal oedema) relative to vehicle (P < 0.001). CONCLUSIONS: Treatment of photodamaged skin with tazarotene is associated with an amelioration of keratinocytic and melanocytic atypia, an improvement in epidermal polarity, and an increase in epidermal thickness.

Analysis of glenoid fixation for a reversed anatomy fixed-fulcrum shoulder replacement.

The restoration of pain-free stable function in gleno-humeral arthritic cases in various situations such as rotator cuff deficiency, old trauma and failed total shoulder arthroplasty is a challenging clinical dilemma. The Bayley-Walker shoulder has been designed specifically for very difficult cases where surface replacement devices do not provide sufficient stability. This device is a fixed-fulcrum reverse anatomy implant where the centre of rotation is placed medially and distally with respect to the normal shoulder, to increase the lever arm of the abductor muscles. An important problem in devices of this type is obtaining secure and long-lasting fixation of the glenoid component. In this design, fixation is achieved using a tapered screw for engagement with cortical bone and HA coating for subsequent osseointegration. This study presents the results from a three-dimensional finite element analysis conducted on this component for two load cases at 60 degrees and 90 degrees abduction. The results showed that most of the forces were transmitted from the component to the cortical bone of the scapula, the remaining load being transmitted through cancellous bone. Histology from a retrieved case shows evidence of bone remodelling. The retrieval case obtained some time after implantation showed new bone formation had occurred around the threads onto the HA coating. Fixing the component in this way at multiple locations in cortical bone may overcome the problems of glenoid loosening historically associated with cemented constrained devices.

Polyethylene wear characteristics in vivo and in a knee stimulator.

Validation of a wear simulator requires that the device produce a similar type and amount of wear and particles of a comparable morphology as occurs clinically. Using techniques previously established to compare polyethylene particles from hip simulators to those from retrieved tissues, particles isolated from six revised posterior stabilized knee replacements were characterized and compared to particles generated from the same knee design worn in a knee simulator. The particles produced in the knee simulator were of comparable size but had less variability in their form factor compared to the particles produced in vivo. Comparable wear features were seen on the articulating surfaces in both groups. These results indicate that this knee joint simulator is able to reproduce a baseline type of wear that is similar to that in vivo and should encourage further use of this device to better understand knee component wear and function.

A new concept in guided motion total knee arthroplasty.

When the normal knee is flexed from 0 to maximum, the lateral femoral condyle displaces posteriorly, but the medial condyle remains almost in the same position. There is anteroposterior and rotational laxity about this neutral path. The hypothesis of this study was that this motion could be provided in a total knee arthroplasty by specially shaped bearing surfaces, in particular, where the lateral femoral condyle converged inward around the periphery from extension to full flexion. Tibial surfaces were generated with such femoral condyles moving through a neutral motion path. Displacing the femur in anteroposterior or rotation about the neutral position at a given angle of flexion intersected a volume of the tibial surface in both directions, showing that the femur was "at the bottom of the tibial dish." The volumes were comparable with those for conventional condylar replacement total knee arthroplasties. These data supported the general concept of converging femoral condyles, which may be present in the natural knee itself to guide motion.

Tazarotene cream for the treatment of facial photodamage: a multicenter, investigator-masked, randomized, vehicle-controlled, parallel comparison of 0.01%, 0.025%, 0.05%, and 0.1% tazarotene creams with 0.05% tretinoin emollient cream applied once daily for 24 weeks.

OBJECTIVE: To assess the safety and efficacy of 4 concentrations of tazarotene cream in the treatment of facial photodamage. DESIGN: Prospective weekly multicenter, investigator-masked, randomized, parallel-group study. SETTING: University hospitals and clinical research centers. PATIENTS: Three hundred forty-nine subjects with facial photodamage. INTERVENTION: Daily topical application of tazarotene cream (0.01%, 0.025%, 0.05%, and 0.1%) compared with its vehicle and with 0.05% tretinoin emollient cream. RESULTS: Tazarotene cream and tretinoin cream significantly improved mottled hyperpigmentation and fine wrinkles. At week 24, treatment success rates based on global responses were 67% (39 of 58 subjects) with 0.1% tazarotene, 52% (30 of 58 subjects) with 0.05% tazarotene, 36% (21 of 58 subjects) with 0.025% tazarotene, 41% (24 of 59 subjects) with 0.01% tazarotene, 55% (32 of 58 subjects) with 0.05% tretinoin, and 22% (13 of 58 subjects) with vehicle. Local adverse events, although more frequent with tazarotene at higher concentrations, were generally mild to moderate. CONCLUSIONS: Tazarotene in a cream formulation is safe and is associated with positive changes in the treatment of photodamaged facial skin.

Comparison between a Constrained Condylar and a Rotating Hinge in revision knee surgery.

The performance of Constrained Condylar and Rotating Hinge types of total knee replacement was compared by mechanical testing, by using the Knee Society Clinical and Radiographic evaluations, and by a self-assessment questionnaire. In mechanical tests to evaluate varus strength, Constrained Condylars developed at least 6 degrees of varus rotation, but there was minimal varus rotation in the Rotating Hinges. This was reflected in the stability scores in the Knee Society evaluation. The shorter stems used in the Constrained Condylars resulted in a higher variation in femoral-tibial angles, and a smaller than ideal valgus angle. Radiographically, the only radiolucent lines observed were those adjacent to the joint itself, and there was no difference between the two types of total knee replacement. From the questionnaire, there was a high correlation in the performances between the operated and non-operated knees in the Rotating Hinge group. This indicated the Hinges were capable of matching their performance to a required level, thereby producing a better overall clinical result. In summary, the study indicated that a Rotating Hinge type should be given greater consideration, particularly if the disadvantages of larger bone resection and longer stems could be overcome.

Pulmonary clearance rate of two chemically different forms of inhaled pertechnetate.

Attempts to image the pulmonary deposition site of radiolabeled aerosols delivered by dry powder inhalers (DPIs) and pressurized metered-dose inhalers (pMDIs) using single photon emission computed tomography (SPECT) have been limited by the rapid pulmonary clearance of radiolabel. To determine whether aqueous solubility of the radiolabel is a significant factor, the pulmonary clearance rates of two chemically different forms of 99mTc were calculated. A dry powder formulation of terbutaline sulphate was radiolabeled for inhalation by Turbuhaler (AstraZeneca) using the water-soluble salt sodium pertechnetate and the water-insoluble salt tetraphenylarsonium pertechnetate. A pilot study was conducted during which two control subjects each inhaled the two radiolabeled aerosols on separate days. Intrasubject clearance rates for the two species were very similar. It was therefore concluded that water insolubility of the pertechnetate salt alone was not enough to extend the lung residency time of the radiolabel.