Converse magneto-electric effects in a core-shell multiferroic nanofiber by electric field tuning of ferromagnetic resonance.

This report is on studies directed at the nature of magneto-electric (ME) coupling by ferromagnetic resonance (FMR) under an electric field in a coaxial nanofiber of nickel ferrite (NFO) and lead zirconate titanate (PZT). Fibers with ferrite cores and PZT shells were prepared by electrospinning. The core-shell structure of annealed fibers was confirmed by electron- and scanning probe microscopy. For studies on converse ME effects, i.e., the magnetic response of the fibers to an applied electric field, FMR measurements were done on a single fiber with a near-field scanning microwave microscope (NSMM) at 5-10 GHz by obtaining profiles of both amplitude and phase of the complex scattering parameter S11 as a function of bias magnetic field. The strength of the voltage-ME coupling Av was determined from the shift in the resonance field Hr for bias voltage of V = 0-7 V applied to the fiber. The coefficient Av for the NFO core/PZT shell structure was estimated to be - 1.92 kA/Vm (- 24 Oe/V). A model was developed for the converse ME effects in the fibers and the theoretical estimates are in good agreement with the data.

Disentangling topographic contributions to near-field scanning microwave microscopy images.

We develop empirical models to predict the contribution of topographic variations in a sample to near-field scanning probe microwave microscopy (NSMM) images. In particular, we focus on |S11| images of a thin Perovskite photovoltaic material and a GaN nanowire. The difference between the measured NSMM image and this prediction is our estimate of the contribution of material property variations to the measured image. Prediction model parameters are determined from either a reference sample that is nearly free of material property variations or directly from the sample of interest. The parameters of the prediction model are determined by robust linear regression so as to minimize the effect of material property variations on results. For the case where the parameters are determined from the reference sample, the prediction is adjusted to account for instrument drift effects. Our statistical approach black is fully empirical black and thus complementary to current approaches based on physical models that are often overly simplistic.

Single Molecule Vibrational Spectroscopy: CO Bonding to Edge and Terrace Positions on Ag, Au, and Pd Islands on NiAl(110).

The vibrational properties of single CO molecules adsorbed on nanosized Ag, Au, and Pd islands on a NiAl(110) surface were studied with a scanning tunneling microscope. The sensitivity of single molecule vibrational spectroscopy to aspects of the local environment is demonstrated by comparative studies of CO-metal bond vibrations at island terrace and island edge sites. Vibrational spectra of single CO molecules adsorbed on Ag, Au, and Pd island terraces showed peaks at 27, 32, and 44 meV, respectively, which are assigned to the hindered rotational mode. CO molecules on Au and Pd island edges, on the other hand, showed blue-shifted hindered rotational modes at 34 and 46 meV, respectively. On Au islands, CO molecules showed a strong preference for adsorption on edges, while no such preference was observed on Pd.

Adaptive and robust statistical methods for processing near-field scanning microwave microscopy images.

Near-field scanning microwave microscopy offers great potential to facilitate characterization, development and modeling of materials. By acquiring microwave images at multiple frequencies and amplitudes (along with the other modalities) one can study material and device physics at different lateral and depth scales. Images are typically noisy and contaminated by artifacts that can vary from scan line to scan line and planar-like trends due to sample tilt errors. Here, we level images based on an estimate of a smooth 2-d trend determined with a robust implementation of a local regression method. In this robust approach, features and outliers which are not due to the trend are automatically downweighted. We denoise images with the Adaptive Weights Smoothing method. This method smooths out additive noise while preserving edge-like features in images. We demonstrate the feasibility of our methods on topography images and microwave |S11| images. For one challenging test case, we demonstrate that our method outperforms alternative methods from the scanning probe microscopy data analysis software package Gwyddion. Our methods should be useful for massive image data sets where manual selection of landmarks or image subsets by a user is impractical.

A near-field scanning microwave microscope for characterization of inhomogeneous photovoltaics.

We present a near-field scanning microwave microscope (NSMM) that has been configured for imaging photovoltaic samples. Our system incorporates a Pt-Ir tip inserted into an open-ended coaxial cable to form a weakly coupled resonator, allowing the microwave reflection S(11) signal to be measured across a sample over a frequency range of 1 GHz - 5 GHz. A phase-tuning circuit increased impedance-measurement sensitivity by allowing for tuning of the S(11) minimum down to -78 dBm. A bias-T and preamplifier enabled simultaneous, non-contact measurement of the DC tip-sample current, and a tuning fork feedback system provided simultaneous topographic data. Light-free tuning fork feedback provided characterization of photovoltaic samples both in the dark and under illumination at 405 nm. NSMM measurements were obtained on an inhomogeneous, third-generation Cu(In,Ga)Se(2) (CIGS) sample. The S(11) and DC current features were found to spatially broaden around grain boundaries with the sample under illumination. The broadening is attributed to optically generated charge that becomes trapped and changes the local depletion of the grain boundaries, thereby modifying the local capacitance. Imaging provided by the NSMM offers a new RF methodology to resolve and characterize nanoscale electrical features in photovoltaic materials and devices.

Calibrated nanoscale capacitance measurements using a scanning microwave microscope.

A scanning microwave microscope (SMM) for spatially resolved capacitance measurements in the attofarad-to-femtofarad regime is presented. The system is based on the combination of an atomic force microscope (AFM) and a performance network analyzer (PNA). For the determination of absolute capacitance values from PNA reflection amplitudes, a calibration sample of conductive gold pads of various sizes on a SiO(2) staircase structure was used. The thickness of the dielectric SiO(2) staircase ranged from 10 to 200 nm. The quantitative capacitance values determined from the PNA reflection amplitude were compared to control measurements using an external capacitance bridge. Depending on the area of the gold top electrode and the SiO(2) step height, the corresponding capacitance values, as measured with the SMM, ranged from 0.1 to 22 fF at a noise level of ~2 aF and a relative accuracy of 20%. The sample capacitance could be modeled to a good degree as idealized parallel plates with the SiO(2) dielectric sandwiched in between. The cantilever/sample stray capacitance was measured by lifting the tip away from the surface. By bringing the AFM tip into direct contact with the SiO(2) staircase structure, the electrical footprint of the tip was determined, resulting in an effective tip radius of ~60 nm and a tip-sample capacitance of ~20 aF at the smallest dielectric thickness.

Electronic properties of artificial Au chains with individual Pd impurities.

Artificial Au atomic chains with individual Pd impurities were assembled from single metal atoms with a scanning tunneling microscope on a NiAl(110) surface. Scanning tunneling spectroscopy (STS) revealed an electronic resonance 2.15 eV above the Fermi energy localized within 4 A of single Pd atom impurities and two electronic resonances 2.25 eV and 2.95 eV above the Fermi energy localized within 8 A of Pd dimer impurities. The emergence of these localized resonances was studied by STS at each stage of the atom-by-atom assembly. Additionally, conductance images of the chains revealed delocalized electronic density oscillations in the pure Au segments of the chains.

Realization of a particle-in-a-box: electron in an atomic Pd chain.

Well-defined Pd chains were assembled from single atoms on a NiAl(110) surface with the tip of a scanning tunneling microscope. The electronic properties of the chains were determined by spatially resolved conductance measurements, revealing a series of quantum well states with parabolic dispersion. The particle-in-a-box states in Pd chains show higher onset energy and larger effective mass than those in Au chains investigated before, reflecting the influence of elemental composition on one-dimensional electronic systems. The intrinsic widths and spectral intensities of Pd induced states provide information on lifetime and spatial localization of states in the atomic chain.

Distance dependence of the interaction between single atoms: gold dimers on NiAl(110).

The importance of substrate-mediated adsorbate-adsorbate interactions on electronic states has been demonstrated for Au dimers on NiAl(110) with a scanning tunneling microscope and density functional calculations. An unoccupied resonance observed in single Au atoms splits into a doublet in Au dimers. The energy splitting depends inversely on the distance between the two adatoms, revealing the relative importance of direct and substrate-mediated interactions. Spatially resolved conductance measurements of Au dimers reveal the symmetric and antisymmetric characters of the doublet states.

Localized molecular constraint on electron delocalization in a metallic chain.

An artificial quantum structure consisting of a single CO molecule adsorbed on a Au chain was assembled by manipulating single Au atoms on NiAl(110) at 12 K with a scanning tunneling microscope (STM). The CO disrupts the delocalization of electron density waves in the chain, as it suppresses the coupling between neighboring chain atoms. The possibility to specify the CO position on the chain allows controlled modification of the electronic properties in a quantum system. Inelastic electron tunneling spectroscopy with the STM provides vibrational characterization of the adsorbed CO.

Influence of a heterogeneous Al2O3 surface on the electronic properties of single Pd atoms.

Electronic properties of single Pd atoms, deposited on Al(2)O(3)/NiAl(110), have been characterized by scanning tunneling spectroscopy at 12 K. The spectra reveal distinct conductivity resonances, assigned to discrete electronic levels in the atom. The energy position of the resonances reflects adsorption properties of Pd atoms on different sites of the oxide support. Mapping the spatial extent of conductivity channels in the Pd atoms yields the symmetry of the underlying electronic states. The results demonstrate the effect of a heterogeneous oxide surface on the electronic structure of adsorbed metal atoms.

Electronic density oscillations in gold atomic chains assembled atom by atom.

Linear Au chains two to 20 atoms long were constructed on a NiAl(110) surface via the manipulation of single atoms with a scanning tunneling microscope. Differential conductance (dI/dV) images of these chains reveal one-dimensional electronic density oscillations at energies 1.0 to 2.5 eV above the Fermi energy. The origin of this delocalized electronic structure is traced to the existence of an electronic resonance measured on single, isolated Au atoms. Variations in the wavelength in dI/dV images of an eleven-atom chain taken at different energies revealed an effective electronic mass of 0.4+/-0.1 times the mass of a free-electron.

Development of one-dimensional band structure in artificial gold chains.

The ability of a scanning tunneling microscope to manipulate single atoms is used to build well-defined gold chains on NiAl(110). The electronic properties of the one-dimensional chains are dominated by an unoccupied electron band, gradually developing from a single atomic orbital present in a gold atom. Spatially resolved conductance measurements along a 20-atom chain provide the dispersion relation, effective mass, and density of states of the free electron-like band. These experiments demonstrate a strategy for probing the interrelation between geometric structure, elemental composition, and electronic properties in metallic nanostructures.