RESUMO
OBJECTIVE: When implanting the Zero-P device, the screws of Zero-P form a bone wedge with a 40 ± 5° cranial and caudal angle (CCA). However, no study has been performed in the optimal CCA of the Zero-P implant. To investigate whether the cranial/caudal angles (CCA) of the screws affect the clinical and radiological outcomes in patients undergoing ACDF with the Zero-P implant. METHODS: From January 2016 to December 2023, we retrospectively analyzed 186 patients who underwent 1-level ACDF with the Zero-P device. The patients were divided into four groups: group A (cranial angle ≤40°, caudal angle ≤40°); group B (cranial angle ≤40°, caudal angle >40°); group C (cranial angle >40°, caudal angle ≤40°); and group D (cranial angle >40°, caudal angle >40°). The clinical outcomes, including Japanese Orthopaedic Association (JOA), neck disability index (NDI), and visual analogue scale (VAS) scores, the radiological parameters, including cervical lordosis (CL), cervical lordosis of operated segments (OPCL), intervertebral space height (ISH) and fusion rate (FR), and the complications, were evaluated and compared. Parametric tests, non-parametric tests, and chi-square tests were conducted to analyze the data. RESULTS: The OPCL of group A was significantly less than that of the other groups at the final follow-up (p < 0.05). The ISH of group D was significantly less than that of group A at the final follow-up (p < 0.05). The subsidence rate of group A was significantly less than that of group D at the final follow-up (p < 0.05). At the final follow-up, the upper adjacent-level degeneration (ASD) of group D was significantly less severe than that of groups A and B (p < 0.05). The clinical outcomes do not differ among groups (p > 0.05). CONCLUSION: A larger CCA of the screws (cranial angle >40°, caudal angle >40°) was better for maintaining OPCL and reducing the incidence of ASD. A smaller CCA of the screws (cranial angle ≤40°, caudal angle ≤40°) was better for maintaining ISH and reducing the rate of subsidence.
RESUMO
OBJECTIVE: To investigate (1) lateral atlantoaxial articulation (LAA) morphology in patients with basilar invagination (BI) with atlantoaxial dislocation (AAD) and healthy individuals and its relationship with the severity of dislocation and (2) the effect of the LAA morphology on reduction degree (RD) after surgery. METHODS: In this retrospective propensity score matching case-control study, imaging and baseline data of 62 patients with BI and AAD from 2011 to 2022 were collected. Six hundred thirteen participants without occipitocervical junctional deformity served as controls. Logistic regression and receiver operating characteristic (ROC) curve were used for analysis. RESULTS: The age, BMI and sex did not differ significantly between the two groups after propensity score matching. Sagittal slope angle (SSA) and coronal slope angle (CSA) was lower and greater, respectively, in the patient group than in the control group. A negative SSA value usually indicates anteverted LAA. Regression analysis revealed a significant negative correlation between SSA and severity of dislocation. However, no relationship was found between CSA and the severity of dislocation. The multivariate logistic regression analysis revealed that minimum-SSA emerged as an independent predictor of satisfactory reduction (RD ≥ 90%). The ROC curve demonstrated an area under the curve of 0.844, with a cut-off value set at -40.2. CONCLUSION: SSA in patients group was significantly smaller and more asymmetric than that in the control group. Dislocation severity was related to SSA but not to CSA. Minimum-SSA can be used as a predictor of horizontal RD after surgery.
Assuntos
Articulação Atlantoaxial , Luxações Articulares , Humanos , Masculino , Feminino , Articulação Atlantoaxial/cirurgia , Articulação Atlantoaxial/diagnóstico por imagem , Luxações Articulares/cirurgia , Luxações Articulares/diagnóstico por imagem , Luxações Articulares/etiologia , Estudos Retrospectivos , Adulto , Pessoa de Meia-Idade , Estudos de Casos e Controles , Índice de Gravidade de Doença , Resultado do Tratamento , Platibasia/diagnóstico por imagem , Platibasia/cirurgia , Pontuação de Propensão , Adulto Jovem , Fusão Vertebral/efeitos adversos , Tomografia Computadorizada por Raios XRESUMO
Background: Anterior bone loss (ABL) is a common phenomenon after cervical disc replacement (CDR), which can also be observed after anterior cervical discectomy and fusion (ACDF). This study aimed to investigate the incidence and severity of ABL in single-level CDR and ACDF and explore the association of cervical sagittal alignment with ABL. Methods: This is a single-center retrospective cohort study. A total of 113 patients treated with CDR and 99 patients treated with ACDF were retrospectively reviewed from January 2014 to December 2018 in West China Hospital. Radiological data were collected at pre-operation, 1 week, 3 months postoperatively, and the last follow-up. The incidence and severity of ABL after both CDR and ACDF were evaluated. Cervical sagittal alignment parameters, including C0-C2 angle, cervical lordosis (CL), C2-C7 sagittal vertical axis (cSVA), T1 slope, functional spinal unit angle, disc angle, and surgical level slope, were evaluated. Results: ABL was identified in 75 (66.4%) patients in the CDR group and 57 (57.6%) patients in the ACDF group. There were no significant differences in the incidence, severity, and location of ABL between the ACDF and CDR groups. For patients who underwent ACDF, the proportion of females was significantly higher in the ABL group (64.9% vs. 33.3%, P=0.002), whereas the body mass index (BMI) was significantly lower in the ABL group compared to the non-ABL group (22.72±3.09 vs. 24.60±3.04, P=0.002). No effect of ABL on the short-term clinical outcomes of ACDF and CDR was observed. In the ACDF group, patients with ABL had significantly smaller postoperative CL (11.83°±8.24° vs. 15.25°±8.32°, P=0.04) and cSVA (17.77±10.08 vs. 23.35±9.86 mm, P=0.007). In the CDR group, no significant differences were found in the cervical sagittal parameters between patients with and without ABL (CL: 12.58±8.70 vs. 15.46±8.50, P=0.10; cSVA: 20.95±8.54 vs. 19.40±9.43, P=0.38). Conclusions: ABL is common after both CDR and ACDF with comparable incidence and severity. Cervical sagittal alignment was closely related to ABL after ACDF yet had less influence on ABL after CDR.
RESUMO
OBJECTIVE: Cable-dragged reduction and cantilever beam internal fixation can provide promising results in the treatment of atlantoaxial dislocation or instability. However, bilateral atlantoaxial joints bone autografting has not been conducted in this technique. We aim to evaluate the safety and effectiveness of bilateral atlantoaxial joints bone autografting in posterior cable-dragged reduction and cantilever-beam internal fixation. METHODS: In this retrospective study, we included 14 patients with a minimum 24-month follow-up from December 2019 to September 2020. The granular bone harvested from the iliac crest was packed into the bilateral atlantoaxial joints of 14 patients in posterior cable-dragged reduction and cantilever-beam internal fixation. X-ray imaging and cervical computed tomography (CT) were performed during follow-up. The time required for bone fusion was recorded. The clinical outcomes were evaluated using the JOA scores, NDI, and VAS scores. Mann-Whitney U test, the chi-squared test, or the Fisher exact test were used to compare the two groups regarding patient characteristics, clinical outcomes, bone fusion rates, and cervical sagittal alignment. RESULTS: The operations were successfully performed in all patients without any intraoperative complications. The mean operation time was (169.64 ± 20.91) minutes, and the intraoperative blood loss was (130.71 ± 33.62) mL. All patients received satisfactory reductions and firm bony fusion at the final follow-up. The fusion rates were 64.29% in the atlantoaxial joints and 21.43% in post bone graft area at 3 months postoperatively, and a significant difference was observed (p = 0.022). Besides, the cervical sagittal alignment in all patients was well maintained in the last follow-up compared to preoperatively. Importantly, a complete bony fusion in the atlantoaxial joints was observed in all patients. Moreover, the JOA, NDI, and VAS scores had improved significantly at the last follow-up. CONCLUSION: Bone autografting of the bilateral atlantoaxial joints is a safe and effective technique to increase bone fusion rates, shorten bone fusion time, and reduce complication rates when the cable-dragged reduction and cantilever beam internal fixation approach is used. Therefore, it is a cost-effective surgical procedure for treating patients with atlantoaxial dislocation or instability.
Assuntos
Articulação Atlantoaxial , Luxações Articulares , Fusão Vertebral , Traumatismos da Coluna Vertebral , Humanos , Estudos Retrospectivos , Articulação Atlantoaxial/diagnóstico por imagem , Articulação Atlantoaxial/cirurgia , Transplante Autólogo , Resultado do Tratamento , Luxações Articulares/cirurgia , Fusão Vertebral/métodosRESUMO
BACKGROUND: For the treatment of distal clavicle fractures, each treatment method has its own advantages and disadvantages, and there is no optimal surgical solution. CASE SUMMARY: Based on this, we report 2 cases of distal clavicle fractures treated utilizing an anterior inferior plate with a single screw placed in the distal, in anticipation of providing a better surgical approach to distal clavicle fracture treatment. Two patients were admitted to the hospital after trauma with a diagnosis of distal clavicle fracture, and were admitted to the hospital for internal fixation of clavicle fracture by incision and reduction, with good postoperative functional recovery. CONCLUSION: With solid postoperative fixation and satisfactory prognostic functional recovery, this technique has been shown to be simple, easy to perform and effective.
RESUMO
OBJECTIVE: The long-term results of cervical disc arthroplasty (CDA) for noncontiguous cervical degenerative disc disease (CDDD) are still uncertain. Moreover, it is unclear whether CDA delays or avoids the degeneration of the intermediate segment (IS), leading to controversy in the field. Therefore, this study aimed to investigate the mid- to long-term clinical and radiographic outcomes of CDA in treating noncontiguous CDDD and to explore whether the IS degenerated faster after CDA than other non-surgically treated adjacent segments. METHODS: We retrospectively analyzed patients with noncontiguous CDDD who underwent CDA in our department between January 2008 and July 2018. The patients were divided into the CDA and hybrid surgery (HS) groups, and clinical and radiographic outcomes were evaluated at routine postoperative intervals. Clinical outcomes were assessed using the Japanese Orthopaedic Association (JOA), neck disability index (NDI), and visual analogue scale (VAS), while radiographic outcomes included cervical lordosis (CL), C2-C7 range of motion (ROM), segmental ROM, and disc angle (DA) at the arthroplasty level. Complications were also evaluated.Pre- and postoperative values were compared using paired t-tests or Wilcoxon rank-sum tests. Independent Student t-tests or Mann-Whitney U tests analyzed continuous data between CDA and HS groups, while chi-square or Fisher exact tests assessed categorical data. RESULTS: Sixty-four patients with noncontiguous CDDD, with 31 in the CDA group and 33 in the HS group, were evaluated. The mean follow-up time was over 70 months. The most frequently involved levels were C4/5 and C5/6. Both groups showed significant improvements in JOA, NDI, and VAS values after surgery. Although CL was maintained, the CL in the CDA group was consistently lower than that in the HS group (p < 0.05). There was a significant decrease in C2-C7 ROM (p < 0.05), but at the last follow-up, the C2-C7 ROM in the CDA group was greater than that in the HS group (p < 0.05). At the last follow-up, 44.3% of arthroplasty levels had developed heterotopic ossification (HO), and 48.45% had developed anterior bone loss (ABL). In addition, adjacent segment degeneration (ASDeg) was observed in the IS (22.7%), superior adjacent segment (20.6%)and inferior adjacent segment (21.9%). CONCLUSION: CDA or CDA combined with fusion are viable treatments for noncontiguous CDDD, with satisfactory outcomes after mid-to-long-term follow-up. ASDeg is similar in non-surgical segments after 70 months of follow-up. ROM of the IS issimilar to preoperative levels, indicating CDA does not increase the risk of IS degeneration.
Assuntos
Degeneração do Disco Intervertebral , Lordose , Fusão Vertebral , Substituição Total de Disco , Humanos , Degeneração do Disco Intervertebral/cirurgia , Seguimentos , Estudos Retrospectivos , Resultado do Tratamento , Artroplastia/métodos , Vértebras Cervicais/cirurgia , Amplitude de Movimento Articular , Lordose/cirurgia , Fusão Vertebral/métodosRESUMO
BACKGROUND: The uncovertebral joint is a potential region for anterior cervical fusion. Currently, we are aware of no clinical trials on human uncovertebral joint fusion (UJF). The purpose of this study was to compare the time it took to achieve osseous union/fusion and the clinical efficacy of UJF to end plate space fusion (ESF)-i.e., traditional anterior cervical discectomy and fusion (ACDF)-in anterior cervical surgery. METHODS: Patients with single-level cervical spondylosis were recruited from April 2021 through October 2022 and randomly divided into the UJF and ESF groups, with 40 patients in each group. Autologous iliac bone was used for bone grafting in both groups. The primary outcome was the early fusion rate at 3 months postoperatively. Secondary outcomes included the prevalence of complications and patient-reported outcome measures (PROMs), including the Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), and visual analog scale (VAS) scores for arm and neck pain. RESULTS: A total of 74 patients (92.5%) with an average age of 49.8 years (range, 26 to 65 years) completed the trial and were included in the analysis. There was no significant difference between the 2 groups at baseline. The operative duration and intraoperative blood loss were also comparable between the 2 groups. The fusion rate in the UJF group was significantly higher than that in the ESF group at 3 months (66.7% compared with 13.2%, p < 0.0001) and 6 months (94.1% compared with 66.7%, p = 0.006) after the operation. No significant difference was found in the fusion rate between the 2 groups 12 months postoperatively. Overall, the PROMs significantly improved after surgery in both groups and did not differ significantly between the groups at any follow-up time point. The prevalence of complications was not significantly different between the 2 groups. CONCLUSIONS: In our study of anterior cervical fusion surgery, we found that the early fusion rate after UJF was significantly higher than that after ESF. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Vértebras Cervicais , Fusão Vertebral , Humanos , Pessoa de Meia-Idade , Estudos Prospectivos , Vértebras Cervicais/cirurgia , Discotomia , Resultado do Tratamento , Estudos Retrospectivos , SeguimentosRESUMO
Introduction: Anterior cervical discectomy and fusion (ACDF) is widely accepted as the gold standard surgical procedure for treating cervical radiculopathy and myelopathy. However, there is concern about the low fusion rate in the early period after ACDF surgery using the Zero-P fusion cage. We creatively designed an assembled uncoupled joint fusion device to improve the fusion rate and solve the implantation difficulties. This study aimed to assess the biomechanical performance of the assembled uncovertebral joint fusion cage in single-level ACDF and compare it with the Zero-P device. Methods: A three-dimensional finite element (FE) of a healthy cervical spine (C2-C7) was constructed and validated. In the one-level surgery model, either an assembled uncovertebral joint fusion cage or a zero-profile device was implanted at the C5-C6 segment of the model. A pure moment of 1.0 Nm combined with a follower load of 75 N was imposed at C2 to determine flexion, extension, lateral bending, and axial rotation. The segmental range of motion (ROM), facet contact force (FCF), maximum intradiscal pressure (IDP), and screw-bone stress were determined and compared with those of the zero-profile device. Results: The results showed that the ROMs of the fused levels in both models were nearly zero, while the motions of the unfused segments were unevenly increased. The FCF at adjacent segments in the assembled uncovertebral joint fusion cage group was less than that that of the Zero-P group. The IDP at the adjacent segments and screw-bone stress were slightly higher in the assembled uncovertebral joint fusion cage group than in those of the Zero-P group. Stress on the cage was mainly concentrated on both sides of the wings, reaching 13.4-20.4 Mpa in the assembled uncovertebral joint fusion cage group. Conclusion: The assembled uncovertebral joint fusion cage provided strong immobilization, similar to the Zero-P device. When compared with the Zero-P group, the assembled uncovertebral joint fusion cage achieved similar resultant values regarding FCF, IDP, and screw-bone stress. Moreover, the assembled uncovertebral joint fusion cage effectively achieved early bone formation and fusion, probably due to proper stress distributions in the wings of both sides.
RESUMO
Background: More than 70 percent of the world's population is tortured with neck pain more than once in their vast life, of which 50-85% recur within 1-5 years of the initial episode. With medical resources affected by the epidemic, more and more people seek health-related knowledge via YouTube. This article aims to assess the quality and reliability of the medical information shared on YouTube regarding neck pain. Methods: We searched on YouTube using the keyword "neck pain" to include the top 50 videos by relevance, then divided them into five and seven categories based on their content and source. Each video was quantitatively assessed using the Journal of American Medical Association (JAMA), DISCERN, Global Quality Score (GQS), Neck Pain-Specific Score (NPSS), and video power index (VPI). Spearman correlation analysis was used to evaluate the correlation between JAMA, GQS, DISCERN, NPSS and VPI. A multiple linear regression analysis was applied to identify video features affecting JAMA, GQS, DISCERN, and NPSS. Results: The videos had a mean JAMA score of 2.56 (SD = 0.43), DISCERN of 2.55 (SD = 0.44), GQS of 2.86 (SD = 0.72), and NPSS of 2.90 (SD = 2.23). Classification by video upload source, non-physician videos had the greatest share at 38%, and sorted by video content, exercise training comprised 40% of the videos. Significant differences between the uploading sources were observed for VPI (P = 0.012), JAMA (P < 0.001), DISCERN (P < 0.001), GQS (P = 0.001), and NPSS (P = 0.007). Spearman correlation analysis showed that JAMA, DISCERN, GQS, and NPSS significantly correlated with each other (JAMA vs. DISCERN, p < 0.001, JAMA vs. GQS, p < 0.001, JAMA vs. NPSS, p < 0.001, DISCERN vs. GQS, p < 0.001, DISCERN vs. NPSS, p < 0.001, GQS vs. NPSS, p < 0.001). Multiple linear regression analysis suggested that a higher JAMA score, DISCERN, or GQS score were closely related to a higher probability of an academic, physician, non-physician or medical upload source (P < 0.005), and a higher NPSS score was associated with a higher probability of an academic source (P = 0.001) than of an individual upload source. Conclusions: YouTube videos pertaining to neck pain contain low quality, low reliability, and incomplete information. Patients may be put at risk for health complications due to inaccurate, and incomplete information, particularly during the COVID-19 crisis. Academic groups should be committed to high-quality video production and promotion to YouTube users.
Assuntos
COVID-19 , Mídias Sociais , Humanos , Disseminação de Informação , Dor , Educação de Pacientes como Assunto , Reprodutibilidade dos Testes , Estados Unidos , Gravação em VídeoRESUMO
STUDY DESIGN: Retrospective study. OBJECTIVES: To explore preoperative segmental slope as a predictor of fusion rate after single-level anterior cervical discectomy and fusion (ACDF). METHODS: Data of consecutive patients with single-level cervical spondylosis who underwent ACDF between 2011 and January 2019 were retrospectively reviewed. Preoperative parameters including baseline characteristics, segment slope, T1 slope, range of motion, intervertebral disk height, and bone density were evaluated. Data were analyzed using Student's t-test, Mann-Whitney U test, χ2 test, Fisher's exact test, multivariate logistic regression analysis, and receiver operating characteristic curve. RESULTS: In total, 253 patients were selected. The mean follow-up was 32.1 months (range 24-99 months). Male sex, body mass index, preoperative segment slope, T1 slope, operative levels, and osteoporosis or osteopenia were associated with non-fusion at an early stage after surgery. However, no statistically significant difference was observed at the last follow-up. Multivariate logistic regression analysis revealed that the preoperative segment slope was an independent predictor for non-fusion at 3, 6, and 12 months postoperatively. Osteoporosis or osteopenia was an independent predictor of non-fusion at 6 and 12 months postoperatively. The area under the curve was .874 at 3 months (P < .001, cutoff value 10.21°), .888 at 6 months (P < .001, cutoff value 14.56°), and .825 at 12 months (P < .001, cutoff value 21.08°). CONCLUSION: Preoperative segment slope can be used as a predictor of early fusion rate after single-level ACDF. We determined detailed cutoff values. This study may help surgeons take measures to promote early fusion in advance.
RESUMO
STUDY DESIGN: Retrospective cohort study. OBJECTIVE: To explore the association between craniocervical sagittal balance and clinical and radiological outcomes of cervical disc replacement (CDR). METHODS: Patients who underwent 1-level and 2-level CDR were retrospectively analyzed. Clinical outcomes were evaluated using scores on the Japanese Orthopaedic Association (JOA), Visual Analogue Scale (VAS), and Neck Disability Index (NDI). The craniocervical sagittal alignment parameters, including the C0-C2 Cobb angle, C2-C7 Cobb angle, C2 slope, T1 slope, C2-C7 sagittal vertical axis (SVA), C1-C7 SVA, the center of gravity of the head (CGH)-C7 SVA, and range of motion (ROM) at the surgical segments were measured. RESULTS: A total of 169 patients were involved. Significantly lower pre- and postoperative C2 slope and CGH-C7 SVA were found in arthroplasty levels with better ROMs. Patients with a higher preoperative C2 slope and CGH-C7 SVA had lower cervical lordosis and ROM after surgery. There were no significant differences in the clinical outcomes between patients with different sagittal balance statuses. C2-C7 SVA and CGH-C7 SVA were significantly associated with radiographic adjacent segment pathology (rASP). CONCLUSION: Craniocervical sagittal balance is associated with cervical lordosis and ROM at the index level after CDR. A higher preoperative SVA is related to the presence and progression of rASP. A relationship between sagittal alignment and clinical outcomes was not observed.
RESUMO
PURPOSE: The pathological changes of basilar invagination (BI) and atlantoaxial dislocation (AAD) include vertical and horizontal dislocations. Current surgical techniques have difficulty in accurately controlling the degree of reduction in these two directions and often require preoperative traction, which increases patients' pain, hospital stay, and medical cost. This study aimed to introduce a novel technique for accurately reducing horizontal and vertical dislocation without preoperative traction and report the radiological and clinical outcomes. METHODS: From 2010 to 2020, patients with BI and AAD underwent posterior two-step distraction and reduction (TSDR) and occipitocervical fixation. Radiological examination was used to evaluate the reduction degree (RD) and compression. Japanese Orthopedic Association (JOA) score was used to evaluate clinical outcome. RESULTS: A total of 55 patients with BI and AAD underwent TSDR and occipitocervical fusion. The clinical symptoms of 98.2% of them improved. JOA score increased significantly after the operation. Appropriate (50% ≤ RD < 80%) or satisfactory (RD ≥ 80%) horizontal reduction was achieved in 92.7% of patients, and 90.9% obtained appropriate or satisfactory vertical reduction. Thirty-one patients did not undergo preoperative skull traction. There was no significant difference in radiological outcomes or JOA scores between the traction and non-traction groups. However, the length of hospital stay in the traction group was longer than that in the non-traction group. CONCLUSION: TSDR enables horizontal and vertical reduction. It is a safe, simple, and effective technique for patients with BI and AAD. Despite the absence of preoperative skull traction, the degree of reduction and clinical outcomes were satisfactory.
Assuntos
Articulação Atlantoaxial , Luxações Articulares , Lesões do Pescoço , Platibasia , Fusão Vertebral , Articulação Atlantoaxial/diagnóstico por imagem , Articulação Atlantoaxial/cirurgia , Humanos , Luxações Articulares/diagnóstico por imagem , Luxações Articulares/cirurgia , Lesões do Pescoço/cirurgia , Fusão Vertebral/métodos , Tração/métodosRESUMO
Background: The traditional titanium mesh cage (TTMC) has become common as a classical instrument for Anterior Cervical Corpectomy and Fusion (ACCF), but a series of complications such as cage subsidence, adjacent segment degeneration (ASD), and implant-related complications by using the TTMC have often been reported in the previous literature. The aim of this study was to assess whether a novel anatomic titanium mesh cage (NTMC) could improve the biomechanical condition after surgery. Methods: The NTMC model consists of two spacers located on both sides of the TTMC which match the anatomic structure between the endplates by measuring patient preoperative cervical computed tomography (CT) data. The ranges of motion (ROMs) of the surgical segments and the stress peaks in the C6 superior endplates, titanium mesh cage (TMC), screw-bone interface, anterior titanium plate, and adjacent intervertebral disc were compared. Results: Compared with the TTMC, the NTMC reduced the surgical segmental ROMs by 89.4% postoperatively. The C6 superior endplate stress peaks were higher in the TTMC (4.473-23.890 MPa), followed by the NTMC (1.923-5.035 MPa). The stress peaks on the TMC were higher in the TTMC (47.896-349.525 MPa), and the stress peaks on the TMC were lower in the NTMC (17.907-92.799 MPa). TTMC induced higher stress peaks in the screw-bone interface (40.0-153.2 MPa), followed by the NTMC (14.8-67.8 MPa). About the stress peaks on the anterior titanium plate, the stress of TTMC is from 16.499 to 58.432 MPa, and that of the NTMC is from 12.456 to 34.607 MPa. Moreover, the TTMC induced higher stress peaks in the C3/4 and C6/7 intervertebral disc (0.201-6.691 MPa and 0.248-4.735 MPa, respectively), followed by the NTMC (0.227-3.690 MPa and 0.174-3.521 MPa, respectively). Conclusion: First, the application of the NTMC can effectively decrease the risks of TMC subsidence after surgery. Second, in the NTMC, the stresses at the anterior screw-plate, bone-screw, and TMC interface are much less than in the TTMC, which decreased the risks of instrument-related complications after surgery. Finally, increases in IDP at adjacent levels are associated with the internal stresses of adjacent discs which may lead to ASD; therefore, the NTMC can effectively decrease the risks of ASD.
RESUMO
OBJECTIVES: To systematically quantify the diagnostic accuracy and identify potential covariates affecting the performance of artificial intelligence (AI) in diagnosing orthopedic fractures. METHODS: PubMed, Embase, Web of Science, and Cochrane Library were systematically searched for studies on AI applications in diagnosing orthopedic fractures from inception to September 29, 2021. Pooled sensitivity and specificity and the area under the receiver operating characteristic curves (AUC) were obtained. This study was registered in the PROSPERO database prior to initiation (CRD 42021254618). RESULTS: Thirty-nine were eligible for quantitative analysis. The overall pooled AUC, sensitivity, and specificity were 0.96 (95% CI 0.94-0.98), 90% (95% CI 87-92%), and 92% (95% CI 90-94%), respectively. In subgroup analyses, multicenter designed studies yielded higher sensitivity (92% vs. 88%) and specificity (94% vs. 91%) than single-center studies. AI demonstrated higher sensitivity with transfer learning (with vs. without: 92% vs. 87%) or data augmentation (with vs. without: 92% vs. 87%), compared to those without. Utilizing plain X-rays as input images for AI achieved results comparable to CT (AUC 0.96 vs. 0.96). Moreover, AI achieved comparable results to humans (AUC 0.97 vs. 0.97) and better results than non-expert human readers (AUC 0.98 vs. 0.96; sensitivity 95% vs. 88%). CONCLUSIONS: AI demonstrated high accuracy in diagnosing orthopedic fractures from medical images. Larger-scale studies with higher design quality are needed to validate our findings. KEY POINTS: ⢠Multicenter study design, application of transfer learning, and data augmentation are closely related to improving the performance of artificial intelligence models in diagnosing orthopedic fractures. ⢠Utilizing plain X-rays as input images for AI to diagnose fractures achieved results comparable to CT (AUC 0.96 vs. 0.96). ⢠AI achieved comparable results to humans (AUC 0.97 vs. 0.97) but was superior to non-expert human readers (AUC 0.98 vs. 0.96, sensitivity 95% vs. 88%) in diagnosing fractures.
Assuntos
Fraturas Ósseas , Ortopedia , Inteligência Artificial , Fraturas Ósseas/diagnóstico por imagem , Humanos , Estudos Multicêntricos como Assunto , Curva ROC , Sensibilidade e EspecificidadeRESUMO
OBJECTIVES: The aim of the study is to investigate the clinical and radiologic factors represented by the increasing of spinal cord area associated with the prognosis of the patients at long-term follow-up by multivariate analysis after single-door cervical laminoplasty (SDCL). METHODS: A total of 115 patients who underwent cervical laminoplasty with miniplate fixation were included from November 2008 to June 2018. The average postoperative follow-up period was 17.3 months (range, 12-105 months). The prognosis of the patients following cervical laminoplasty was evaluated by the recovery rate of Japanese Orthopedic Association (JOA) at the final follow-up. The recovery rate of JOA ≤ 50% were classified as poor prognosis group (PP group) whose prognosis is relatively poor, and those> 50% were classified as good prognosis group (GP group) whose have a better prognosis. The clinical factors including gender, age, duration of symptoms, diagnosis type, blood loss, operative time, pre- and post-JOA score, etc. were recorded. The radiologic factors including sagittal canal diameter (SCD), the cervical curvature index (CCI), the range of motion (ROM), the spinal canal area and the increasing of cervical spinal cord area, etc. were collected before and after operation and measured by X-ray plain and computed tomography (CT) scan images. The univariate analysis and multivariate logistic regression analysis were performed. RESULTS: There were 62 patients in PP group and 53 patients in GP group. The multivariate analysis showed that the preoperative (OR=6.875, P = 0.001) and postoperative JOA scores (OR=24.000, P = 0.001), preoperative spinal canal area (OR=2.464, P = 0.023) and the increasing of cervical spinal cord area (OR=5.438, P = 0.001) maybe related factors to the recovery rate of JOA at the final follow-up. CONCLUSIONS: The preoperative spinal canal area, the increasing of cervical spinal cord area, preoperative and postoperative JOA scores play important roles in long-term prognosis after SDCL.
Assuntos
Medula Cervical , Laminoplastia , Medula Cervical/diagnóstico por imagem , Medula Cervical/cirurgia , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/cirurgia , Humanos , Laminectomia/métodos , Laminoplastia/métodos , Estudos Retrospectivos , Medula Espinal/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: Heterotopic ossification (HO) is a common complication after cervical disc replacement (CDR). Biomechanical factors including endplate coverage and intervertebral disc height change may be related to HO formation. However, there is a dearth of quantitative analysis for endplate coverage, intervertebral height change and their combined effects on HO. METHODS: Patients who underwent single-level or two-level CDR with Prestige-LP were retrospectively reviewed. Clinical outcomes were evaluated through Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI) score, and visual analogue scale (VAS) score. Radiological data, including the prosthesis-endplate depth ratio, intervertebral height change, posterior heterotopic ossification (PHO) and angular parameters, were collected. Logistic regression analysis was used to identify the potential risk factors. Receiver operating characteristic curves were plotted and the cut-off values of each potential factors were calculated. RESULTS: A total of 138 patients with 174 surgical segments were evaluated. Both the prosthesis-endplate depth ratio (P < 0.001) and post-operative disc height change (P < 0.001) were predictive factors for PHO formation. The area under the curve (AUC) of the prosthesis-endplate depth ratio, disc height change and their combined effects represented by the combined parameter (CP) were 0.728, 0.712 and 0.793, respectively. The risk of PHO significantly increased when the prosthesis-endplate depth ratio < 93.77% (P < 0.001, OR = 6.909, 95% CI 3.521-13.557), the intervertebral height change ≥ 1.8 mm (P < 0.001, OR = 5.303, 95% CI 2.592-10.849), or the CP representing the combined effect < 84.88 (P < 0.001, OR = 10.879, 95% CI 5.142-23.019). CONCLUSIONS: Inadequate endplate coverage and excessive change of intervertebral height are both potential risk factors for the PHO after CDR. Endplate coverage less than 93.8% or intervertebral height change more than 1.8 mm would increase the risk of PHO. The combination of these two factors may exacerbate the non-uniform distribution of stress in the bone-implant interface and promote HO development.
Assuntos
Membros Artificiais , Vértebras Cervicais/cirurgia , Degeneração do Disco Intervertebral/cirurgia , Disco Intervertebral , Ossificação Heterotópica , Substituição Total de Disco , Adulto , Idoso , Vértebras Cervicais/diagnóstico por imagem , Feminino , Seguimentos , Humanos , Disco Intervertebral/diagnóstico por imagem , Disco Intervertebral/cirurgia , Degeneração do Disco Intervertebral/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Ossificação Heterotópica/diagnóstico por imagem , Ossificação Heterotópica/etiologia , Estudos Retrospectivos , Substituição Total de Disco/efeitos adversos , Resultado do TratamentoRESUMO
OBJECTIVES: To explore the factors associated with the increased spinal cord area in single-door cervical laminoplasty (SDCL) with miniplate fixation. METHODS: A retrospective study enrolled 83 patients underwent SDCL with miniplate fixation and the patient characteristics such as age, gender, tobacco use, alcohol use, diabetes mellitus, hypertension, diagnosis, operative level, etc., were obtained. The opening angle, door shaft position and spinal canal area of the patients were measured after surgery. The sagittal canal diameter (SCD), the C2-7 Cobb angle, the cervical curvature index (CCI), the range of motion (ROM) and the spinal canal area were measured before and after operation. The increased cervical spinal cord area was also measured before and after surgery, and the correlation between the above indicators and the increased cervical spinal cord area was studied through Pearson's correlation analysis and multivariate logistic regression analysis. RESULTS: There were 34 patients in small spinal cord area increment group (SAI group), 29 patients in middle spinal cord area increment group (MAI group) and 20 patients in large spinal cord area increment group (LAI group). The preoperative diagnosis(P = 0.001), door shaft position (P = 0.008), preoperative spinal canal area (P = 0.004) and postoperative spinal canal area (P = 0.015) were significant different among the 3 groups. The multivariate analysis showed that the preoperative diagnosis (OR = 2.076, P = 0.035), door shaft position (OR = 3.425, P = 0.020) and preoperative spinal canal area (OR = 10.217, P = 0.009) were related to increased spinal cord area. CONCLUSIONS: The preoperative diagnosis, door shaft position and preoperative spinal canal area might be associated with increased spinal cord area after cervical laminoplasty with miniplate fixation. Preoperative symptoms are mostly caused by compression of the spinal cord, so spinal cord area enlargement can bring a better recovery in patients alongside long-term. Spine surgeons should pay more attention to the accuracy of the preoperative diagnosis, the preoperative measurement of spinal canal area and the door shaft position during the operation.
Assuntos
Laminoplastia , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/cirurgia , Humanos , Laminectomia , Laminoplastia/efeitos adversos , Análise Multivariada , Estudos Retrospectivos , Medula Espinal , Resultado do TratamentoRESUMO
BACKGROUND: The surgical outcomes of anterior cervical discectomy and fusion (ACDF) in female patients according to menopausal status remain unclear. The objective of this study was to investigate the differences in these outcomes among female patients with different menopausal statuses. METHODS: Ninety-one patients undergoing single-level or consecutive two-level ACDF with a minimum 12-month postoperative follow-up were included in this study. There were 38 patients in the premenopausal group, 28 patients in the early postmenopausal group, and 25 patients in the late postmenopausal group. The clinical outcomes were evaluated by means of the neck disability index (NDI) scores, Japanese Orthopedic Association (JOA) scores, and visual analog scale (VAS) scores. Radiological parameters included cervical lordosis (CL), the functional spinal unit (FSU) angle, range of motion (ROM) of the total cervical spine, ROM of the FSU, anterior and posterior FSU height, implant subsidence, adjacent segment degeneration (ASD), and Hounsfield unit (HU) values. RESULTS: All groups showed significant improvements in their JOA, VAS, and NDI scores (P < 0.05). The differences in preoperative and final follow-up CL, ROM of C2-7, FSU angle, and ROM of FSU were not statistically significant among the three groups (P > 0.05). The anterior FSU height loss rate showed a significant difference (P = 0.043), while there was no difference in the posterior FSU height loss rate (P = 0.072). The fusion rates in the early and late postmenopausal groups were consistently lower than those in the premenopausal group during the follow-up period. All patients had satisfactory outcomes at the final follow-up. CONCLUSION: There were no significant differences in clinical or other related outcomes of single-level or consecutive two-level ACDF in the long term among female patients with different menopausal statuses. However, the early bony fusion rates and anterior FSU height loss rates were poorer in late postmenopausal patients than in premenopausal or early postmenopausal patients. Hence, importance should be attached to the protection of late postmenopausal patients in the early postoperative period to guarantee solid bony fusion.
Assuntos
Degeneração do Disco Intervertebral , Lordose , Fusão Vertebral , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/cirurgia , Discotomia/efeitos adversos , Feminino , Seguimentos , Humanos , Degeneração do Disco Intervertebral/cirurgia , Menopausa , Estudos Retrospectivos , Fusão Vertebral/efeitos adversos , Resultado do TratamentoRESUMO
STUDY DESIGN: Retrospective study. OBJECTIVE: This study aimed to compare the fusion order between the cranial and caudal levels in two-level anterior cervical discectomy and fusion (ACDF) with a zero-profile device in the treatment of cervical spondylopathy. Fusion is the standard used to judge the success of ACDF. However, the fusion order in two-level ACDF remains uncertain. The mechanical environment of different levels is different, which may affect the fusion rate or fusion order. METHODS: From 2014 to January 2019, data of consecutive patients with two-level cervical disk degenerative disease who underwent ACDF were retrospectively reviewed. Radiological assessments were based on the range of motion of the fusion level, segment slope, and disk height, and complications were assessed. Data were analyzed using the paired t, Mann-Whitney U, χ2, Fisher exact, and rank-sum tests and logistic regression analysis. RESULTS: In total, 118 patients were ultimately enrolled for analysis in the study. The respective fusion rates of the cranial and caudal levels were 26.27% and 10.17% (p < 0.05) at 3 months, 58.47% and 42.37% (p < 0.05) at 6 months, 86.44% and 82.20% (1 0.05) at 1 year, and 92.37% and 89.83% (p > 0.05) at the last follow-up. Multivariate logistic regression analysis indicated that the preoperative segmental slope and cranial level were independent risk factors for non-fusion. The adjacent segment degeneration (ASD) and subsidence rates were comparable between the two levels. CONCLUSION: The caudal level had a slower fusion process than the cranial level. A higher preoperative segment slope was a risk factor for fusion. However, the subsidence and ASD rate were comparable between the caudal and cranial levels in the two-level ACDF.