Graphite Carbon Nitride and Its Composites for Medicine and Health Applications.

With the progress of science and technology and the improvement of people's living standards, the performance of traditional materials can no longer fully meet the needs of social development. Graphitic phase carbon nitride (g-C3 N4 ), as a new type of nanomaterial, has good properties. Its unique graphite like structure and stable thermodynamic characteristics have led an increasing number of researchers to explore its diverse functions and use this as a basis to develop related energy and products for applications in various fields. Among them, applications in the field of medicine health have become popular in recent years. Therefore, this review summarizes the synthesis methods of g-C3 N4 and its composites, as well as their applications in food, medicine, environmental monitoring and disease treatment, in the hope of providing references and basis for further expanding the applications of g-C3 N4 in large health areas.

Langmuir-Blodgett Thin Films of Diketopyrrolopyrrole-Based Amphiphiles.

We report on two π-conjugated donor-acceptor-donor (D-A-D) molecules of amphiphilic nature, aiming to promote intermolecular ordering and carrier mobility in organic electronic devices. Diketopyrrolopyrrole was selected as the acceptor moiety that was disubstituted with nonpolar and polar functional groups, thereby providing the amphiphilic structures. This structural design resulted in materials with a strong intermolecular order in the solid state, which was confirmed by differential scanning calorimetry and polarized optical microscopy. Langmuir-Blodgett (LB) films of ordered mono- and multilayers were transferred onto glass and silicon substrates, with layer quality, coverage, and intermolecular order controlled by layer compression pressure on the LB trough. Organic field-effect transistors and organic photovoltaics devices with active layers consisting of the amphiphilic conjugated D-A-D-type molecules were constructed to demonstrate that the LB technique is an effective layer-by-layer deposition approach to fabricate self-assembled, ordered thin films.

Stable organic thin-film transistors.

Organic thin-film transistors (OTFTs) can be fabricated at moderate temperatures and through cost-effective solution-based processes on a wide range of low-cost flexible and deformable substrates. Although the charge mobility of state-of-the-art OTFTs is superior to that of amorphous silicon and approaches that of amorphous oxide thin-film transistors (TFTs), their operational stability generally remains inferior and a point of concern for their commercial deployment. We report on an exhaustive characterization of OTFTs with an ultrathin bilayer gate dielectric comprising the amorphous fluoropolymer CYTOP and an Al2O3:HfO2 nanolaminate. Threshold voltage shifts measured at room temperature over time periods up to 5.9 × 105 s do not vary monotonically and remain below 0.2 V in microcrystalline OTFTs (µc-OTFTs) with field-effect carrier mobility values up to 1.6 cm2 V-1 s-1. Modeling of these shifts as a function of time with a double stretched-exponential (DSE) function suggests that two compensating aging mechanisms are at play and responsible for this high stability. The measured threshold voltage shifts at temperatures up to 75°C represent at least a one-order-of-magnitude improvement in the operational stability over previous reports, bringing OTFT technologies to a performance level comparable to that reported in the scientific literature for other commercial TFTs technologies.

Organic Field-Effect Transistors with a Bilayer Gate Dielectric Comprising an Oxide Nanolaminate Grown by Atomic Layer Deposition.

We report on top-gate OFETs with a bilayer gate dielectric comprising an Al2O3 /HfO2 nanolaminate layer grown by atomic layer deposition and an amorphous fluoro-polymer layer (CYTOP). Top-gate OFETs display average carrier mobility values of 0.9 ± 0.2 cm2/(V s) and threshold voltage values of -1.9 ± 0.5 V and high operational and environmental stability under different environmental conditions such as damp air at 50 °C (80% relative humidity) and prolonged immersion in water at a temperature up to 95 °C.

A Study on Reducing Contact Resistance in Solution-Processed Organic Field-Effect Transistors.

We report on the reduction of contact resistance in solution-processed TIPS-pentacene (6,13-bis(triisopropylsilylethynyl)pentacene) and PTAA (poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine]) top-gate bottom-contact organic field-effect transistors (OFETs) by using different contact-modification strategies. The study compares the contact resistance values in devices that comprise Au source/drain electrodes either treated with 2,3,4,5,6-pentafluorothiophenol (PFBT), or modified with an evaporated thin layer of the metal-organic molecular dopant molybdenum tris-[1,2-bis(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd)3), or modified with a thin layer of the oxide MoO3. An improved performance is observed in devices modified with Mo(tfd)3 or MoO3 as compared to devices in which Au electrodes are modified with PFBT. We discuss the origin of the decrease in contact resistance in terms of increase of the work function of the modified Au electrodes, Fermi-level pinning effects, and decrease of bulk resistance by electrically doping the organic semiconductor films in the vicinity of the source/drain electrodes.

Experimental investigation of defect-assisted and intrinsic water vapor permeation through ultrabarrier films.

In the development of ultrabarrier films for packaging electronics, the effective water vapor transmission rate is a combination of permeation through pinhole defects and the intrinsic permeation through the actual barrier film. While it is possible to measure the effective permeation rate through barriers, it is important to develop a better understanding of the contribution from defects to the overall effective barrier performance. Here, we demonstrate a method to investigate independently defect-assisted permeation and intrinsic permeation rates by observing the degradation of a calcium layer encapsulated with a hybrid barrier film, that is, prepared using atomic layer deposition (ALD) and plasma enhanced deposition (PECVD). The results are rationalized using an analytical diffusion model to calculate the permeation rate as a function of spatial position within the barrier. It was observed that a barrier film consisting of a PECVD SiN(x) layer combined with an ALD Al2O3/HfO(x) nanolaminate resulted in a defect-assisted water vapor transmission rate (WVTR) of 4.84 × 10(-5) g/m(2) day and intrinsic WVTR of 1.41 × 10(-4) g/m(2) day at 50 °C/85% RH. Due to the low defect density of the tested barrier film, the defect-assisted WVTR was found to be three times lower than the intrinsic WVTR, and an effective (or total) WVTR value was 1.89 × 10(-4) g/m(2) day. Thus, improvements of the barrier performance should focus on reducing the number of defects while also improving the intrinsic barrier performance of the hybrid layer.

[Effect of epigallocatechin gallate against exercise-induced fatigue in mice].

OBJECTIVE: To investigate the effects of epigallocatechin gallate (EGCG)against exercise-induced fatigue in mice. METHODS: Total 120 mice were randomly divided into three groups and tested separately. For each test, there were 30 mice subdivided into high dose (50 mg/kg . d EGCG) and low dose (10 mg/kg . d EGCG) groups as well as saline control group(1 ml/kg . d) with 10 in each. Burden swimming, running wheel endurance, stick climbing and hypoxia tolerance exercise were used to establish fatigue mice training model in three groups. And intraperitoneal injection with different doses of EGCG per day for consecutively 28 days and the mice in the control group were treated with normal saline. After the last each test, the blood lactic acid (BLA), blood urea nitrogen (BUN), blood lactate dehydrogenase (LDH), muscle glycogen (MG) and liver glycogen (LG) of each group of mice were determined. RESULTS: EGCG treatment groups(B and C)revealed a prolonged the mice survival time of burden swimming test, hypoxia tolerance, running wheel time and the ability of stick climbing(P < 0.05 or P <0.01), and increased LDH activity and MG and LG contents, reduced contents of BLA and BUN. High dose group had an obviously increase effect than lower dose group(P <0.05). CONCLUSION: EGCG has significant effects against exercise-induced fatigue in mice.

Stable low-voltage operation top-gate organic field-effect transistors on cellulose nanocrystal substrates.

We report on the performance and the characterization of top-gate organic field-effect transistors (OFETs), comprising a bilayer gate dielectric of CYTOP/Al2O3 and a solution-processed semiconductor layer made of a blend of TIPS-pentacene:PTAA, fabricated on recyclable cellulose nanocrystal-glycerol (CNC/glycerol) substrates. These OFETs exhibit low operating voltage, low threshold voltage, an average field-effect mobility of 0.11 cm(2)/(V s), and good shelf and operational stability in ambient conditions. To improve the operational stability in ambient a passivation layer of Al2O3 is grown by atomic layer deposition (ALD) directly onto the CNC/glycerol substrates. This layer protects the organic semiconductor layer from moisture and other chemicals that can either permeate through or diffuse out of the substrate.

Tetracyano isoindigo small molecules and their use in n-channel organic field-effect transistors.

N,N'-Dihexyl-6,6'-dicyanoisoindigo, N,N'-didecyl-5,5',6,6'-tetracyanoisoindigo, N,N'-dihexyl-5,5',6,6'-tetracyanoisoindigo, and N,N'-dihexyl-5,5',6,6'-tetracyanothienoisoindigo have been synthesised in moderate yields by the reaction of corresponding di and tetrabromo species with CuCN, with microwave heating leading to higher yields and fewer side products for the tetrasubstituted species. Di- and tetracyano substitution anodically shifts the molecular reduction potential relative to the unsubstituted cores by ca. 0.4 and 0.8 V, respectively, with the resultant values for the tetracyano derivatives (-0.58 to -0.67 V vs. FeCp2(+/0)) suggesting the possibility of air-stable electron transport. All the synthesised cyano derivatives operate in n-channel OFETs, while the tetrabromothienoisoindigo derivative functions in a p-channel transistor. The tetracyanothienoisoindigo derivative exhibits the highest field-effect electron mobility values - up to 0.04 and 0.09 cm(2) V(-1) s(-1) in spin-coated and inkjet-printed devices respectively - and OFETs incorporating this compound have been shown to operate in air without significant degradation of their mobility values in the saturation regime.

Enhanced light collection of GaN light emitting devices by redirecting the lateral emission using nanorod reflectors.

We demonstrate a method of utilizing self-assembled nanorod array reflectors to collect the laterally propagating guided modes from a light emitting diode (LED). We measure an enhancement factor of 12.2% and 18.4%, respectively, from the sidewall emission of GaN-based LEDs encompassed with 10 and 20 microm thick nanorod array reflectors. Such enhancement is found to be omnidirectional due to a broken symmetry from a randomized distribution of the nanorod array placed along the periphery of the LED's mesa. These observations indicate that the use of nanorod reflectors can efficiently redirect the propagation of the laterally guided modes to the surface normal direction.

Monolithic silica xerogel capillary column for separations in capillary LC and pressurized CEC.

Monolithic capillary columns were prepared by the reaction of a mixture of potassium silicate solution and formamide. The surface of the monolith was coated with a thin film formed by a sol-gel method to increase the surface area of the monolith and simultaneously covered with C8 as stationary phase for reversed-phase separation. The morphology of the monolithic column was investigated by SEM. Monolithic columns prepared in this manner showed high permeability and can be operated in capillary LC (CLC) mode at a pressure of 20 psi. PAHs were used to evaluate the separation performance of the stationary phase using CLC and pressurized CEC (pCEC). Efficiencies of 20 000 and 28 000 plates per meter for naphthalene were obtained in CLC and pCEC modes, respectively. Improvement in column efficiency and reduction in analysis time over CLC and improvement in operation facility and separation selectivity over CLC were found using pCEC mode.

GaN nanorod light emitting diode arrays with a nearly constant electroluminescent peak wavelength.

A practical process to fabricate InGaN/GaN multiple quantum well light emitting diodes (LEDs) with a self-organized nanorod structure is demonstrated. The nanorod array is realized by using nature lithography of surface patterned silica spheres followed by dry etching. A layer of spin-on-glass (SOG), which intervening the rod spacing, serves the purpose of electric isolation to each of the parallel nanorod LED units. The electroluminescence peak wavelengths of the nanorod LEDs nearly remain as constant for an injection current level between 25mA and 100mA, which indicates that the quantum confined stark effect is suppressed in the nanorod devices. Furthermore, from the Raman light scattering analysis we identify a strain relaxation mechanism for lattice mismatch layers in the nanostructure.

Open-tubular gas chromatography using capillary coated with octadecylamine-capped gold nanoparticles.

The octadecylamine-capped gold nanoparticles (ODA-Au-NPs) were prepared and directly used to coat the capillary wall. The hydrophobic coating acted as the stationary phase for open-tubular gas chromatography (OTGC). The ODA-Au-NPs can be adsorbed tightly onto the inner surface of fused silica capillary column via electrostatic interaction and enhanced interaction of van der Waals between gold nanoparticles and the capillary wall. Thus, the modification of the inner surface of capillary column by ODA-Au-NPs can be achieved simply by flushing the capillary with a solution of ODA-Au-NPs and the resulted ODA-Au-NPs coating is very stable. No perceptible degradation in the ODA-Au-NPs-based separation was observed after approximately 1900 sample runs. This type of columns also provided excellent chromatographic performances: high number of theoretical plates, outstanding run-to-run and column-to-column reproducibility, and high selectivity for a wide range of test mixtures. An efficiency of 2474 theoretical plates per meter for chlorobenzene was obtained on an ODA-Au-NPs-modified 1.6 m x 100 microm i.d. fused silica capillary column.

The simultaneous separation and determination of six flavonoids and troxerutin in rat urine and chicken plasma by reversed-phase high-performance liquid chromatography with ultraviolet-visible detection.

The method of high-performance liquid chromatography (HPLC) with UV-vis detection was used and validated for the simultaneous determination of six flavonoids (puerarin, rutin, morin, luteolin, quercetin, kaempferol) and troxerutin in rat urine and chicken plasma. Chromatographic separation was performed using a VP-ODS column (150 mm x 4.6 mm, 5.0 microm) maintained at 35.0 degrees C. The mobile phase was a mixture of water, methanol and acetic acid (57:43:1, v/v/v, pH 3.0) at the flow rate of 0.8 mL/min. Six flavonoids and troxerutin were analyzed simultaneously with good separation. On optimum conditions, calibration curves were found to be linear with the ranges of 0.10-70.00 microg/mL (puerarin, rutin, morin, luteolin, quercetin, kaempferol) and 0.50-350.00 microg/mL (troxerutin). The detection limits were 0.010-0.050 microg/mL. The method was validated for accuracy and precision, and it was successfully applied to determine drug concentrations in rat urine and chicken plasma samples from rat and chicken that had been orally administered with six flavonoids and troxerutin.

Determination of benorilate in pharmaceutical formulations and its metabolite in urine at carbon paste electrode modified by silver nanoparticles.

Benorilate was determined by the differential pulse voltammetry (DPV) using a carbon paste electrode modified by silver nanoparticles in 1.25x10(-3)moll(-1) KH(2)PO(4) and Na(2)HPO(4) buffer solution (pH=6.88, 25 degrees C) .The anodic peak potential was +0.970V (versus SCE). A good linear relationship was realized between the anodic peak currents and benorilate concentrations in the range of 1.0x10(-7) to 2.5x10(-4)moll(-1) with the detection limit of 1.0x10(-8)moll(-1). The recovery was 95.2-103.6% with the relative standard deviation of 3.6% (n=9). The pharmaceutical preparations, benorilate tablets samples and its metabolite (salicylic acid) in urine were determined with the desirable results.

Differential pulse adsorption voltammetry for determination of procaine hydrochloride at a pumice modified carbon paste electrode in pharmaceutical preparations and urine.

Procaine hydrochloride was determined by the differential pulse voltammetry (DPV) using a 6% (m/m) pumice modified carbon paste electrode in 1.25 x 10(-3) mol x l(-1) KH(2)PO(4) and Na(2)HPO(4) buffer solution (pH 6.88, 25 degrees C). The anodic peak potential used was +0.980 V (vs. SCE). A good linear relationship was realized between the anodic peak current and procaine concentration in the range of 9.0 x 10(-7)-2.6 x 10(-5) mol x l(-1) with the detection limit of 5.0 x 10(-8) mol x l(-1). The recovery was 95.2-104.8% with the relative standard deviation of 3.2% (n=10). The pharmaceutical preparations, procaine hydrochloride injection and the urine samples were determined with the desirable results.