Development of a Cloud-Based Image Processing Health Checkup System for Multi-Item Urine Analysis.

With the busy pace of modern life, an increasing number of people are afflicted by lifestyle diseases. Going directly to the hospital for medical checks is not only time-consuming but also costly. Fortunately, the emergence of rapid tests has alleviated this burden. Accurately interpreting test results is extremely important; misinterpreting the results of rapid tests could lead to delayed medical treatment. Given that URS-10 serve as a rapid test capable of detecting 10 distinct parameters in urine samples, the results of assessing these parameters can offer insights into the subject's physiological condition. These parameters encompass aspects such as metabolism, renal function, diabetes, urinary tract disorders, hemolytic diseases, and acid-base balance, among others. Although the operational procedure is straightforward, the variegated color changes exhibited in the outcomes of individual parameters render it challenging for lay users to deduce causal factors solely from color variations. Moreover, potential misinterpretations could arise due to visual discrepancies. In this study, we successfully developed a cloud-based health checkup system that can be used in an indoor environment. The system is used by placing a URS-10 test strip on a colorimetric board developed for this study, then using a smartphone application to take images which are uploaded to a server for cloud computing. Finally, the interpretation results are stored in the cloud and sent back to the smartphone to be checked by the user. Furthermore, to confirm whether the color calibration technology can eliminate color differences between different cameras, and also whether the colorimetric board and the urine test strips can perform color comparisons correctly in different light intensity environments, indoor environments that could simulate a specific light intensity were established for testing purposes. When comparing the experimental results to real test strips, only two groups failed to reach an identification success rate of 100%, and in both of these cases the success rate reached 95%. The experimental results confirmed that the system developed in this study was able to eliminate color differences between camera devices and could be used without special technical requirements or training.

Biomechanical analysis of tibial plateau posterolateral fracture fragment fixation and introduction of a lateral tibia plateau hook plate system.

BACKGROUND: Fixing the posterolateral fragments of tibial plateau fractures has been challenging owing to potential neurovascular injuries and fibular head blocks. Several surgical approaches and fixation techniques have been reported, with distinct limitations. We propose a novel lateral tibia plateau hook plate system and compare its biomechanical stability with other fixation methods. METHODS: Twenty-four synthetic tibia models were simulated to present posterolateral tibial plateau fractures. These models were randomly assigned to three groups. Group A models were fixed with the lateral tibia plateau hook plate system, Group B with variable-angle anterolateral locking compression plates, and Group C with direct posterior buttress plates. The models' biomechanical stability was evaluated using static (gradually increased axial compressive loads) and fatigue (cyclically loaded from 100 to 600 N for 2000 cycles each) tests. RESULTS: Groups A and C models exhibited comparable axial stiffness, subsidence load, failure load, and displacement in the static test. Group A model exhibited higher subsidence and failure loads than Group B model. Groups A and C models exhibited comparable displacement at 100 N cyclic loading in the fatigue test. Group C model was more stable at higher loads. Group C model endured the highest subsidence cycle numbers, followed by Groups A and B models. CONCLUSIONS: The lateral tibia plateau hook plate system provided similar static biomechanical stability as the direct posterior buttress plates and comparable dynamic stability under limited axial loading. This system is a potential posterolateral treatment choice owing to its convenience and safety, in treating tibia plateau fractures.

Trimalleolar Fractures Treated by Open Reduction Internal Fixation Compared With Arthroscopically Assisted Reduction and Minimally Invasive Surgery.

BACKGROUND: Currently, the standard of treatment for trimalleolar (TM) fracture is osteosynthesis through open reduction and internal fixation (ORIF). This study assessed whether arthroscopically assisted reduction and minimally invasive surgery (AARMIS) can be an alternative surgical method for TM fractures. METHODS: This retrospective cohort study included 49 patients with TM that were surgically treated. 27 patients received ORIF and 22 patients underwent AARMIS . At baseline, we recorded the patient's demographic features, fracture pattern (AO-OTA and Haraguchi classification), and surgical method. For postoperative results, we examined the patient's radiographic outcome, including time to union, quality of fracture reduction, as well as functional outcomes (American Orthopaedic Foot & Ankle Society ankle hindfoot score, ankle range of motion, and visual analog scale of pain) and perioperative complications. RESULTS: At mean follow-up of 46.6±24.6 (ORIF) and 36.4±18.5 months (AARMIS), both groups had comparable radiographic outcomes. No significant difference in rates of early ankle OA were detected. In terms of functional outcome, VAS pain and AOFAS score at postoperative day 3, postoperative month 3, and at final follow-up were not different. In terms of range of motion, we did not find a significant difference in mean range of motion. CONCLUSION: Patients with TM fractures treated with AARMIS achieved satisfactory results and was not significantly different in radiographic and functional performance compared with ORIF. LEVEL OF EVIDENCE: Level III, retrospective cohort study.

Biomechanical Analysis of the FlatFoot with Different 3D-Printed Insoles on the Lower Extremities.

Insoles play an important role in the conservative treatment of functional flat foot. The features of 3D-printed insoles are high customizability, low cost, and rapid prototyping. However, different designed insoles tend to have different effects. The study aimed to use 3D printing technology to fabricate three different kinds of designed insoles in order to compare the biomechanical effects on the lower extremities in flat foot participants. Ten participants with functional flat foot were recruited for this study. Data were recorded via a Vicon motion capture system and force plates during walking under four conditions: without insoles (shoe condition), with auto-scan insoles (scan condition), with total contact insoles (total condition), and with 5-mm wedge added total contact insoles (wedge condition). The navicular height, eversion and dorsiflexion angles of the ankle joint, eversion moment of the ankle joint, and adduction moment of the knee joint were analyzed, and comfort scales were recorded after finishing the analysis. Compared to the shoe condition, all three 3D printed insoles could increase the navicular height and ankle dorsiflexion angle and improve comfort. Among the three insoles, the wedge condition was the most efficient in navicular height support and increasing the ankle dorsiflexion angle.

First-Ray Radiographic Changes After Flexible Adult Acquired Flatfoot Deformity Correction.

BACKGROUND: Adult acquired flatfoot deformity (AAFD) and hallux valgus (HV) are common foot and ankle deformities. Few studies have reported the changes in radiographic parameters of HV after reconstructive surgery for AAFD. This study aimed to evaluate the changes in radiographic parameters of HV and analyze the risk factors for increased HV after correction of AAFD. METHODS: Adult patients with flexible AAFD who underwent similar bony procedures including medializing calcaneal osteotomy and Cotton osteotomy were included. Radiographic parameters were measured on weightbearing radiographs preoperatively, postoperatively, and at the final follow-up. Patients were divided into hallux valgus angle (HVA) increased and HVA nonincreased groups; logistic regression analysis was performed to identify risk factors affecting increased HV. RESULTS: Forty-six feet of 43 patients were included. After AAFD reconstructive surgery, the tibial sesamoid position improved by 1 grade, but the HVA increased 4 degrees in average. Further, 21 of 46 feet (46%) showed an HVA increase ≥5 degrees immediately after AAFD correction surgery. Preoperative talonavicular coverage angle <21.6 degrees was a risk factor associated with HV increase immediately after the surgery. CONCLUSION: In this case series, using plain radiographs to measure standard parameters of foot alignment, we found the association between AAFD correction and HV deformity measures somewhat paradoxical. Correction of overpronation of the hindfoot and midfoot appears to improve the first metatarsal rotational deformity but may also increase HVA. A lower preoperative talonavicular coverage angle was associated with an increase of the HVA after surgery. LEVEL OF EVIDENCE: Level IV, case series study.

The influence of proximal femur canal size on reduction of intertrochanteric fracture with cephalomedullary nail.

BACKGROUND: Malalignment is the most important risk factor for fixation failure after intertrochanteric fracture treated with a cephalomedullay nail (CMN). Malalignment continues to occur despite advances in surgical techniques. HYPOTHESIS: We hypothesized that small femur canal size causes intra-operative reduction loss during cephalomedullary nail insertion. METHODS: A retrospective study was performed from 2014 to 2017. Patients with acute intertrochanteric fracture implanted with the same sized CMN (Stryker, Mahwah, NJ, USA, diameter: 10mm, length: 170mm, degree 130) were included. Evaluated radiographic parameters included femoral canal size, corrected neck-shaft angle, and calcar reduction. RESULTS: The study totally included and analyzed the data from 108 patients. Patients with smaller femoral canal size tended to have increased calcar distance according to Pearson's correlation coefficient analysis (r(106)=-0.805, p<0.001). Patients with calcar mal-reduction had higher corrected neck-shaft angle post-operatively. This observed correction tended to be lost during follow up. CONCLUSIONS: Small femoral canal size resulted in poorer reduction quality. Reduction loss during nail insertion may be due to the whole proximal fragment instead of the superolateral femoral neck. Reaming the isthmus before nail insertion or choosing a smaller sized CMN is indicated in this patient population to prevent intra- or post-operative loss of reduction. LEVEL OF EVIDENCE: III; retrospective study.

Radiographic and clinical results of modified 2-incision sinus tarsi approach for treatment of calcaneus fracture.

BACKGROUND: Sinus tarsi approach (STA) is the most commonly used minimally invasive surgery (MIS) in the treatment of displaced intra-articular calcaneal fracture (DIACF). However, there are some limitations related to its limited access. The goal of the present study is to describe a modified 2-incision STA and to evaluate the radiographic and clinical outcomes in the treatment of DIACF. MATERIALS AND METHODS: Patients had a Arbeitsgemeinschaft fur Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) classification 82-C, Sanders type II, III calcaneal fracture, and underwent modified 2-incision STA and internal fixation were included in this retrospective study. Serial radiographic measurements and clinical assessment were taken to evaluate the effectiveness of this technique. RESULTS: Thirty-four feet of 33 patients treated between 2014 and 2019 were included with an average follow-up of 28.5 (range, 12-65) months. Mean preoperative Böhler's angle was 1.5 ± 10.0 (range, -26.0-16.9) degrees and mean final Böhler's angle was 29.8 ± 4.9 (range, 19.3-39.3) degrees with significant difference (P < .001). The average American Orthopaedic Foot and Ankle Society (AOFAS) score and visual analogue scale (VAS) pain score at last follow-up were 86.2 ± 5.0 (range, 76-97) and 1.6 ± 1.1 (range, 0-4), respectively. Major complications included 2 (5.9%) wound infections and 1 (2.9%) incomplete separation of the lateral wall prior to plate insertion. DISCUSSION AND CONCLUSIONS: This modified 2-incision STA is a safe and effective procedure. It allows access to the posterior facet and posterior calcaneal tuberosity, appropriate restoration of blowout lateral wall, and easy placement of a standard calcaneal plate.

Initial femoral stem position in cementless bipolar hemiarthroplasty for femoral neck fracture in elderly patients is associated with early implant subsidence: A radiographic analysis.

BACKGROUND: Bipolar hemiarthroplasty is a well-established treatment for displaced femoral neck fracture in elderly patients. Implant subsidence is a potential complication with cementless femoral stems, and smaller canal fill ratio has been reported as a radiographic risk factor. We aimed to determine the risk factors for subsidence, particularly the initial implant position relative to the resected medial calcar of proximal femur. METHODS: We retrospectively reviewed all cementless bipolar hemiarthroplasties performed using a single proximally hydroxyapatite-coated femoral stem in patients with a minimum radiographic follow-up of 12 weeks between January 2017 and December 2018. The amount of subsidence (significant subsidence defined as ≥ 5 mm), canal fill ratio, and implant position relative to the point of resected medial calcar (position A: medial and superior to calcar; position B: lateral and superior to calcar; position C: lateral and inferior to calcar) were measured and analyzed. RESULTS: One-hundred eighty patients were identified (mean age: 80.9 years). Significant subsidence was observed in 52 patients (28.9%). On multivariate analysis, older age, lower canal fill ratio, implant position B, C, and less medial overhang of stem were independent risk factors for early implant subsidence. The risk ratio of position B and C to position A was 5.13 (95% confidence interval, 2.23-11.80). CONCLUSION: In our analysis, older age and lower canal fill ratio were associated with increased risk of subsidence, whereas implant with position A and more medial overhang were less prone to subsidence with the tapered proximally hydroxyapatite-coated implant.

Loss of radial height in extra-articular distal radial fracture following volar locking plate fixation.

BACKGROUND: Radial height is an important prognostic factor in treating distal radius fracture. However, does further collapse of radial height in distal radius fractures after with volar locking plate fixation have a great impact on the prognosis? The present study aimed to elucidate radial height loss and determine the associated risk factors after open reduction and internal fixation with volar locking plate in patients with extra-articular distal radius fractures. HYPOTHESIS: Patients with radial height collapse after fracture reduction and internal fixation with a volar locking plate may have poor outcomes. METHODS: Data of 87 patients (21 male) undergoing surgery for acute extra-articular distal radius fractures (AO: 23-A2 or 23-A3) between February 2014 and July 2016 were evaluated retrospectively. Patients were divided into two groups by radial height loss. Potential risk factors were tested by Pearson correlation coefficients. Stepwise multiple regression logistic analysis determined significant independent risk factors for extra-articular distal radius fractures. Clinical evaluation was performed by the same surgeon by determining wrist ROM. Grip strength was measured with a Jamar dynamometer and compared with non-affect wrist in percentage. In addition, all the patients were asked to grade modified Mayo wrist score and Visual Analogue Scale (VAS) score. These findings were recorded postoperative 1 year of follow-up. RESULTS: Mean radial height loss was 1.3±0.9mm. Age (ß=0.002, p=0.003), postoperative ulnar-positive deformity (ß=0.107, p<0.001), DEXA (ß=-0.015, p=0.008), and shortest diameter of distal fracture fragment in AP and lateral views (ß=-0.050, p=0.037; ß=-0.080, p=0.043) were significantly associated with radial height loss. As for the outcome of clinical prognosis, though radial height collapse group had poorer wrist range of motion, there was no statistical difference. Besides, there were no significant differences in grips strength and VAS score between these two groups. However, in regards of modified Mayo wrist score, the percentage of patients with poor outcomes is significant higher in radial height collapse group (p=0.039). Moreover, all patients with poor outcomes in radial height collapse groups were older than 65-year-old. DISCUSSION: Radial height loss is noted in patients undergoing open reduction and internal fixation with volar locking plate for extra-articular distal radius fractures. Risk factors for radial height collapse include advanced age, poor bone quality, shortest distance between fracture site and articular surface and postoperative ulnar-positive deformity. LEVEL OF EVIDENCE: IV; non-comparative prospective study.

"Ratio of fracture site diameter to isthmus femoral canal diameter" as a predictor of complication following treatment of infra-isthmal femoral shaft fracture with antegrade intramedullary nailing.

INTRODUCTION: Fixation of infra-isthmus femoral shaft fracture using antegrade intramedullary (IM) nailing is difficult and is associated with a high complication rate. This study aimed to identify risk factors for complications following this procedure. The ratio of the fracture site diameter to the diameter of the femoral intramedullary canal of the isthmus (FI ratio) was evaluated as a novel parameter to predict complication. MATERIALS AND METHODS: Patients who underwent antegrade IM nailing for infra-isthmus femoral shaft fracture between January 2008 and December 2018 and had a minimum of 12 months of follow-up were retrospectively reviewed. The primary outcome was occurrence of complication, including non-union, mal-alignment, fixation failure, or progressive loss of reduction. Logistic regression analysis was performed to identify risk factors of complication. The sensitivity and specificity of FI ratio as a predictor of complication was calculated. A receiver operating characteristic (ROC) curve was generated to establish an FI ratio threshold to predict occurrence of complication following antegrade IM nailing. RESULTS: Sixty-five patients with a mean age of 47.1 years were included. Using univariate logistic regression analysis, comminuted fracture pattern (p=0.026), distance from screws to fracture site (< 3cm) (p=0.002), and higher FI ratio (p=0.001) were associated with complication. Using multivariate logistic regression analysis, FI ratio was identified as an independent risk factor for complication following antegrade IM nailing (p=0.038). ROC curve indicated that FI ratio ≥ 2 had sensitivity and specificity of 0.72 and 0.72, respectively, in predicting complication. CONCLUSIONS: Our study indicates that wider intramedullary diameter at the fracture site was associated with higher complication rate following antegrade IM nailing in distal infra-isthmal femoral fractures. The FI ratio could be a reliable predictor of complication after antegrade IM nailing for such fracture, and alternative strategies should be considered for patients with higher FI ratio (≥ 2).

Untreated small posterior fragment of ankle fracture with early removal of syndesmotic screw is associated with recurrent syndesmotic instability.

INTRODUCTION: This retrospective study aimed to report outcomes of fixation of bi-malleolar or tri-malleolar fractures combined with syndesmotic injury with or without posterior malleolar fracture (PMF), and to ascertain whether syndesmotic screw removal at 6 to 8 weeks or 3 months postoperatively is more beneficial. METHODS: We retrospectively reviewed patients who received open reduction and internal fixation for bi-malleolar (without PMF) or tri-malleolar ankle fracture (with PMF) with syndesmotic injury between January 2013 and December 2017 with at least 24 months of postoperative follow-up. All patients suffered syndesmotic instabilities and were treated using a syndesmotic screw without PMF fixation. Patients with bi-malleolar fracture with syndesmotic screw removal at 6 to 8 weeks postoperatively were included in Group I, tri-malleolar fracture with syndesmotic screw removal at 6 to 8 weeks in Group II, and tri-malleolar fracture with syndesmotic screw removal at 3 months in Group III. Demographic data, clinical and radiographic outcomes were analyzed. RESULTS: A total of 113 patients were included (Group I, n=47; Group II, n=43; Group III, n=23). Average size of PMF was 14% in patients with tri-malleolar fractures (Groups II and III). No significant difference in ankle functional outcome among groups was observed. The recurrence rate of syndesmotic instability was 10.6% in Group I, 20.9% in Group II, and 8.7% in Group III. Although the difference in recurrence rates of syndesmotic instability among three groups was not statistically significant (P=0.264), Group II showed more interval change in tibiofibular clear space between initial postoperative radiographs and last follow-up radiographs (P=0.028) compared to the other two groups. Fracture union was achieved in all patients without screw breakage. CONCLUSION: We suggest that the better timing for syndesmotic screw removal is 3 months, instead of 6 to 8 weeks postoperatively, to reduce the risk of recurrence of syndesmotic instability for tri-malleolar fracture without posterior fragment fixation. LEVEL OF EVIDENCE: Level III- Case-control study.

Distal Metatarsal Segmental Shortening for the Treatment of Chronic Metatarsophalangeal Dislocation of Lesser Toes.

BACKGROUND: This retrospective study aimed to describe the techniques and results of distal metatarsal segmental shortening (DMSS) for the treatment of chronic irreducible metatarsophalangeal (MTP) dislocation of lesser toes. METHODS: We retrospectively reviewed patients who underwent DMSS for chronic dislocation of MTP joints of lesser toes between January 2010 and December 2017 with follow-up of at least 24 months. Demographic data, radiographic measurements, functional outcomes, and complications were analyzed. Furthermore, the results of patients with short segment of shortening (group I, <10 mm) were compared to those with long segment of shortening (group II, ≥10 mm). A total of 43 MTP joints of 30 patients with an average age of 70.4 years were included. RESULTS: Union was observed in 42 metatarsals (97.7%). Mean American Orthopaedic Foot & Ankle Society scale scores improved significantly from 42.2 (range, 15-65) preoperatively to 79.1 (range, 52-90) (P < .001). Mean visual analog scale pain score improved significantly from 5.0 (range, 1-9) preoperatively to 1.8 (range, 0-6) (P < .001). Complications included 1 nonunion, 1 osteonecrosis, 3 metatarsal angulation, 4 recurrent instability, 4 symptomatic osteoarthritis, 3 transfer metatarsalgia, and 1 floating toe. Group I included 23 MTP joints and group II included 20 MTP joints. There was no significant difference in clinical outcomes and complications between the 2 groups. CONCLUSION: DMSS was a reliable procedure for the treatment of chronic irreducible dislocated MTP joint of lesser toes. It provided satisfactory surgical outcomes and a low rate of postoperative complications, regardless of length of metatarsal shortening. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Arthroscopic Ankle Arthrodesis Provides Similarly Satisfactory Surgical Outcomes in Ankles With Severe Deformity Compared With Mild Deformity in Elderly Patients.

PURPOSE: To evaluate the surgical outcome in terms of radiographic measurements, functional outcomes, and complications following arthroscopic ankle arthrodesis (AAA) in patients 60 years of age or older, and to compare the results of patients with mildly deformed ankle with those of patients with severely deformed ankle. METHODS: We retrospectively reviewed patients who underwent AAA with 3 cannulated screws between January 2008 and December 2017 and followed postoperatively for at least 24 months. All included patients were 60 years of age or older. Demographic data and radiographic and functional outcomes were compared between patients with coronal deformity of less than 15° (group I) and those with a deformity equal to or greater than 15 degrees (group II). RESULTS: A total of 41 patients with a mean age of 70.6 years were included (group I, n = 26; group II, n = 15) and mean follow-up was 51.4 months. Group II had significantly more severe preoperative coronal deformity of tibiotalar angle than group I (20.1 ± 2.9 vs 6.6 ± 4.1°, P < .01). Near-normal tibiotalar alignment was achieved postoperatively in both groups (group I, 3.4 ± 3.3 vs group II, 4.7 ± 3.1°, P = .227). Union was achieved in 39 (95.1%) patients with 2 cases in group I experiencing non-union. Union rate, mean American Orthopaedic Foot and Ankle Society ankle-hindfoot scale, and visual analog scale pain scores were not significantly different between the 2 groups at final follow-up. CONCLUSIONS: AAA is a reliable procedure for end-stage ankle arthritis in patients 60 years of age or older resulting in a high union rate, encouraging radiographic and functional outcomes, and a low complication rate, even in cases with severe preoperative deformity. In addition, arthroscopic intra-articular malleolar osteotomy was a useful technique for correcting severe coronal deformity in our series. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Comparison of screw fixation versus non-fixation in dorsal opening wedge medial cuneiform osteotomy of adult acquired flatfoot.

BACKGROUND: The aim of this study was to compare the radiographic and functional results between fixation and non-fixation in the Cotton osteotomy for the treatment of adult acquired flatfoot. METHODS: A retrospective, case-controlled study of consecutive stage IIB posterior tibial tendon dysfunction (PTTD) patients treated with the same bony reconstructive surgery including cotton osteotomy between 2013 and 2017. Meary's angle, the medial arch sag angle (MASA), and medial cuneiform cobb angle (MCCA) were evaluated pre-operation, at first weight bearing after surgery, and 12 months post operation. RESULTS: Forty feet were included in the study. The cotton osteotomy utilized screw fixation (n = 20) or non-fixation technique (n = 20). No significant differences between groups were found in pre-operative and follow-up radiographic parameters, union rate, and functional results. CONCLUSION: The non-fixation with press fit technique is a reliable procedure for Cotton osteotomy and as effective as screw fixation. LEVEL OF EVIDENCE: Level III, case control study.

Arthroscopic Reduction and Minimally Invasive Surgery in Supination-External Rotation Ankle Fractures: A Comparative Study With Open Reduction.

PURPOSE: To describe an algorithm for arthroscopic reduction and minimally invasive surgery (ARMIS) and compare the surgical outcomes with standard open reduction-internal fixation (ORIF) for the treatment of supination-external rotation (SER) ankle fractures. METHODS: The inclusion criteria for this study were patients aged 16 years or older, the presence of a unilateral SER fracture, and injuries less than 2 weeks old. We retrospectively identified patients with SER fractures who underwent ORIF from January 2008 to December 2011 or ARMIS from January 2012 to December 2015. Data collected in December 2013 for the ORIF group and in December 2017 for the ARMIS group were compared. The algorithm for ARMIS was minimally invasive plating for lateral malleolar fractures first, followed by ankle arthroscopy for detection of syndesmotic injuries and then arthroscopic reduction of medial malleolar fractures or mini-open repair of the deltoid ligament. The talocrural angle, fibular length, tibiomedial malleolar angle, medial clear space, and tibiofibular clear space were measured radiographically. Functional evaluations included the visual analog scale pain score, American Orthopaedic Foot & Ankle Society ankle-hindfoot scales, and range of motion of bilateral ankles. Complications and reoperations were recorded for comparison. RESULTS: A total of 105 patients with SER fractures, 65 in the ARMIS group and 40 in the ORIF group, were included. Significantly lower incidences of complications (7.7% vs 27.5%, P = .006) and reoperations (1.5% vs 12.5%, P = .029) were found in the ARMIS group than in the ORIF group. More syndesmotic injuries were detected in the ARMIS group than in the ORIS group (80% vs 57.5%, P = .021). The visual analog scale pain score was significantly lower on day 3 postoperatively in the ARMIS group than in the ORIS group (1.96 ± 1.18 vs 2.83 ± 1.07, P = .027). The postoperative stay was shorter in the ARMIS group than in the ORIF group (3.66 ± 1.39 days vs 4.46 ± 2.23 days, P = .024). The operative time was longer in the ARMIS group than in the ORIS group (105.22 ± 27.13 minutes vs 93.59 ± 22.79 minutes, P = .038). A longer fluoroscopic time (0.43 ± 0.25 minutes vs 0.17 ± 0.07 minutes, P < .001) and a higher dose of irradiation (1,216.46 ± 603.99 µGy vs 389.38 ± 217.89 µGy, P < .001) were observed in the ARMIS group. No significant differences in radiographic measurements were found between the operative and nonoperative ankles in both groups. CONCLUSIONS: Our algorithm and the ARMIS techniques may be a safe, reliable, and effective option in the treatment of SER fractures. ARMIS achieves promising surgical outcomes with less early postoperative pain, a shorter postoperative stay, and lower incidences of complications and reoperations compared with ORIF. However, the operative time is longer and the irradiation dose is higher with the ARMIS techniques. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Are proximal screws necessary for osteosynthesis of stable-stem periprosthetic femoral fractures fixed with non-locking plate and cable?

INTRODUCTION: The purpose of this study was to assess the effectiveness of the cable-plate-cable technique which comprises fixation of the proximal fragment using cable loops without additional proximal screws on the plate for the treatment of stable-stem periprosthetic femoral fractures around hip prostheses. METHODS: We retrospectively reviewed Vancouver types B1 and C periprosthetic femoral fractures treated with a dynamic compression plate combined with Dall-Miles cable between 2010 and 2016 at a single institution and followed for at least 12 months. Patients were treated with proximal fragment fixation using cable combined with screws (Group I) or with proximal fragment fixation using cable alone (Group II). Demographic data, fracture types, and clinical and radiological outcomes were analyzed. RESULTS: A total of 50 patients were included (Group I, n = 23 patients; Group II, n = 27). Fracture union was achieved in 49 patients with one case of non-union in Group I and no cases of non-union in Group II. Mean time to union was 5.4 months in Group I and 5.1 months in Group II (P = 0.624). Mean Harris hip score at latest assessment was 69.5 in Group I and 69.4 in Group II (P = 0.919). Regarding complications, there was one deep wound infection, one stem subsidence, and one loss of reduction in Group I, and one stem subsidence in Group II. No significant difference in clinical and radiological outcomes between groups was observed. CONCLUSIONS: The cable-plate-cable technique sufficiently treats Vancouver types B1 and C periprosthetic femoral fractures without use of additional screws in the proximal fragment.

Radiographic Evaluation of Ankle Joint Stability After Calcaneofibular Ligament Elevation During Open Reduction and Internal Fixation of Calcaneus Fracture.

BACKGROUND: The aim of this prospective study was to evaluate the influence of sectioning the calcaneofibular ligament (CFL) during an extensile lateral approach during open reduction and internal fixation (ORIF) of calcaneal fractures on ankle joint stability. METHODS: Forty-two patients with calcaneal fractures that received ORIF were included. Talar tilt stress and anterior drawer radiographs were performed on the operative and contralateral ankles 6 months postoperatively. RESULTS: The average degree of talar tilt on stress radiographs was 3.4 degrees (range, 0-12 degrees) on the operative side and 3.2 degrees (range, 0-14 degrees) on the contralateral side. The mean anterior drawer on stress radiographs of the CFL incised ankle was 6.1 mm (range, 2.4-11.8 mm) and on the contralateral ankle was 5.7 mm (range, 2.6-8.6 mm). There was no statistically significant difference of talar tilt and anterior drawer between the CFL incised side and the contralateral side (P = .658 and .302, respectively). CONCLUSION: The results suggest that sectioning of the CFL without any repair during ORIF of a calcaneal fracture does not have a negative effect on stability of the ankle. Repair of the CFL is, thus, probably not necessary following extended lateral approach for ORIF of calcaneal fractures. LEVEL OF EVIDENCE: Level II, comparative study.

Bone-prosthesis composite with rotating hinged-knee prosthesis in limb salvage surgery for high-grade sarcoma around the knee.

Bone prosthesis composite (BPC) had been widely-used in reconstruction after wide excision of malignant tumors around the knee. However, implant selection for BPC remains a dilemma. Forty-one patients with high-grade malignant bone tumors around the knee who underwent excision and reconstruction with BPC and rotating hinged knee (RHK) prosthesis were included. The mean follow-up time was 54 months (range, 31-78 months). The average Musculoskeletal Tumor Society Rating score was 93.4% (range, 73-100%). The mean range of motion was 125°. Complications included 2 local recurrences, 2 nonunions, and 1 peri-prosthetic fracture. The reconstruction with BPC using the RHK prosthesis provided consistently good functional results with a low complication rate. The RHK prosthesis is a promising choice for BPC reconstruction.