Enhancing the Stability of 4.6 V LiCoO2 Cathode Material via Gradient Doping.

LiCoO2 (LCO) can deliver ultrahigh discharge capacities as a cathode material for Li-ion batteries when the charging voltage reaches 4.6 V. However, establishing a stable LCO cathode at a high cut-off voltage is a challenge in terms of bulk and surface structural transformation. O2 release, irreversible structural transformation, and interfacial side reactions cause LCO to experience severe capacity degradation and safety problems. To solve these issues, a strategy of gradient Ta doping is proposed to stabilize LCO against structural degradation. Additionally, Ta1-LCO that was tuned with 1.0 mol% Ta doping demonstrated outstanding cycling stability and rate performance. This effect was explained by the strong Ta-O bonds maintaining the lattice oxygen and the increased interlayer spacing enhancing Li+ conductivity. This work offers a practical method for high-energy Li-ion battery cathode material stabilization through the gradient doping of high-valence elements.

Long non-coding RNAs MALAT1 and NEAT1 in non-syndromic orofacial clefts.

Long non-coding RNAs (lncRNAs) are thought to play important roles in non-syndromic orofacial clefts (NSOFC). Clinical diagnosis was categorized as either non-syndromic cleft lip with or without cleft palate (NSCL/P), or non-syndromic cleft palate only (NSCPO). Tissues excised from the trimmed wound edge were reserved as experimental samples; adjacent normal control was used as a positive control, and tissue from healthy individuals was used as a blank control. Target lncRNAs in the collected tissues were identified using microarrays and quantitative reverse transcription PCR (RT-qPCR). Immunohistochemical (IHC) staining and RT-qPCR were used to verify the target mRNAs. Pathway, gene ontology (GO) enrichment, and TargetScan predictions were employed to construct competing endogenous RNA networks (ceRNA networks) and explore their potential functions. RNA-Seq revealed 24 upregulated and 43 downregulated lncRNAs; MALAT1 and NEAT1 were screened and validated using RT-qPCR. Common NSOFC risk factors were positively correlated with MALAT1 and NEAT1 expression. Bioinformatics predicted four ceRNA networks; GO enrichment focused on their potential functions. RT-qPCR and IHC data were consistent with respect to expression levels of proteins and the mRNAs that encode them. As MALAT1 and NEAT1 are associated with the severity of NSOFC, they represent potential therapeutic targets and prognostic biomarkers.

A Rare Case of Concrescence of Mandibular Third Molar and Supernumerary Fourth Molar.

Concrescence reveals a rare developmental anomaly in which two fully formed teeth are joined along the root surfaces by cementum, and generally occurs in maxillary molars, especially in a third molar and a supernumerary tooth. Very few cases have been reported about the concrescence of a third molar and a supernumerary fourth molar. Based on our available knowledge, this case report described a rare presentation in which concrescence is observed between a third molar and a supernumerary fourth molar in the mandible by diagnosing with cone-beam CT and histological examination.

Enhanced antibacterial properties and promoted cell proliferation in glass ionomer cement by modified with fluorinated graphene-doped.

In this study, we aimed to improve the properties of conventional glass ionomer cement (GIC), including mechanical properties, wear resistance, antibacterial properties and biological activity, by adding fluorinated graphene (FG). Composites of synthesised FG and GIC were examined after being combined at different mass proportions (0, 0.5, 1.0 and 2.0 wt%). The microstructure and morphology of FG prepared via the hydrothermal method was characterised using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The FG/GIC composite was obtained through the blending method and characterised using SEM. Then, the Vickers microhardness and the wear property of the FG/GIC composite-imitated brushing was measured. The plate count and dilution methods (10-fold) were adopted to investigate the antibacterial properties of FG/GIC by incubating Escherichia coli and Staphylococcus aureus. The biocompatibility of FG/GIC containing the adhesion and cytotoxicity of mouse fibroblast cells (L929) was estimated by the MTT and acridine orange (AO) fluorescent staining. Our results demonstrated that the hardness and abrasive wear resistance of the composites increased, and the microhardness parameter changes exhibited a gradual increase as the concentration continued to increase. A 2.0 wt% FG concentration could effectively improve the bacterial inhibition performance of GIC and was directly proportional to the concentration of FG. The composite materials showed no apparent cytotoxicity on normal L929 cells compared to the control group, and the materials exhibited no cytotoxic effect compared to traditional GIC. Thus, FG/GIC has potential therapeutic value in the field of dental treatment.

Full Concentration Gradient-Tailored Li-Rich Layered Oxides for High-Energy Lithium-Ion Batteries.

Lithium-rich layered oxides (LLOs) are prospective cathode materials for next-generation lithium-ion batteries (LIBs), but severe voltage decay and energy attenuation with cycling still hinder their practical applications. Herein, a series of full concentration gradient-tailored agglomerated-sphere LLOs are designed with linearly decreasing Mn and linearly increasing Ni and Co from the particle center to the surface. The gradient-tailored LLOs exhibit noticeably reduced voltage decay, enhanced rate performance, improved cycle stability, and thermal stability. Without any material modifications or electrolyte optimizations, the gradient-tailored LLO with medium-slope shows the best electrochemical performance, with a very low average voltage decay of 0.8 mV per cycle as well as a capacity retention of 88.4% within 200 cycles at 200 mA g-1 . These excellent findings are due to spinel structure suppression, electrochemical stress optimization, and Jahn-Teller effect inhibition. Further investigation shows that the gradient-tailored LLO reduces the thermal release percentage by as much as about 41% when the battery is charged to 4.4 V. This study provides an effective method to suppress the voltage decay of LLOs for further practical utilization in LIBs and also puts forward a bulk-structure design strategy to prepare better electrode materials for different rechargeable batteries.

Composite Nanostructure Construction on the Grain Surface of Li-Rich Layered Oxides.

Li-rich layered oxides (LLOs) are fascinating high-energy cathodes for lithium-ion batteries (LIBs), but still suffer from critical drawbacks that retard their practical applications. Although surface modification is effective to protect LLOs from structural deterioration, the delicate design of structures on a grain surface with promising scalability for industrial application is still challenging. Herein, using the atomic layer deposition (ALD) technique, a composite nanostructure comprising a uniform LiTaO3 coating layer (≈3 nm) and a spinel interlayer structure (≈1 nm) is constructed on the grain surface of industrial LLO (Li1.13 Mn0.517 Ni0.256 Co0.097 O2 ) agglomerated spheres. The surface composite nanostructure can not only enhance the structural/interfacial stability of the LLO, but also facilitates Li+ diffusion, thereby significantly improving its cycle stability, rate performance, thermal stability, and voltage maintenance. Specifically, the LLO coated with 10 ALD cycles exhibits a small voltage decay rate of 0.9 mV per cycle, a reversible capacity of 272.8 mAh g-1 at 0.1 C, and a capacity retention of 85% after 200 cycles at 1 C, suggesting the important role of surface composite nanostructure for improving the electrochemical performance. This work provides new insights into the composite nanostructure design on the grain surface of cathode materials for high-performance LIBs.

Virtual versus jaw simulation in Oral implant education: a randomized controlled trial.

BACKGROUND: This research aims to investigate the evaluation methods of teaching oral implant clinical courses and estimate the effectiveness of a virtual simulation platform. METHODS: Eighty second- and third-year undergraduates in Lanzhou University were recruited and randomized to either three experimental groups or one control group. The subjects undertook theoretical examinations to test their basic level of knowledge after training in similarly unified knowledge courses. Each student group then participated in an eight-hour operating training session. An operation test on pig mandible was conducted, followed by a second theoretical examination. The assessment consists of three distinct parts: a subjective operating score by a clinical senior teacher, an implant accuracy analysis in cone-beam computed tomography (angular, apical, and entrance deviation), and comparison of the two theoretical examinations. Finally, students completed a questionnaire gauging their understanding of the virtual simulation. RESULTS: There was no significant difference between the four groups in first theoretical examination (P > 0.05); the second theoretical scores of the V-J and J-V group (62.90 ± 3.70, 60.05 ± 2.73) were significantly higher than the first time (57.05 ± 3.92, P < 0.05), while no difference between the V (57.10 ± 3.66) and J (56.89 ± 2.67) groups was found. Thus, the combination of V-J was effective in improving students' theoretical scores. The V-J and J-V groups had higher scores on operation (73.98 ± 4.58, 71.85 ± 4.67) and showed better implant precision. CONCLUSION: Virtual simulation education, especially with a jaw simulation model, could improve students' implantology achievements and training. Currently study found that the V-J group may performed better than the J-V group in oral implant teaching.

Tissue mechanics and expression of TROP2 in oral squamous cell carcinoma with varying differentiation.

BACKGROUND: Trophoblast cell surface antigen 2 (TROP2) is overexpressed in many squamous cell carcinomas and promotes tumor development and invasion. The association between TROP2 expression and occurrence and development of oral squamous cell carcinoma (OSCC) remains to be understood. METHODS: We investigated the role of TROP2 in OSCC patients using a combination of biophysical approaches. A total of 108 OSCC patient specimens with varying degrees of differentiation were subjected to hematoxylin and eosin staining, immunohistochemistry, Kaplan-Meier survival curve analysis, and atomic force microscopy to analyze TROP2 expression, morphology, and mechanical properties of OSCC tissues. RESULTS: TROP2 was overexpressed in 34% of poorly differentiated OSCC samples. High levels of TROP2 were associated with 10.2% survival rate lower than 45.4% and patient age (odds ratio [OR] = 0.437, P = 0.039, 95% confidence interval [CI, 0.198-0.966]), tumor size (OR = 13.148, P = 0.000, 95% CI [5.060-34.168]), and TNM stage (OR = 0.141, P = 0.000, 95% CI [0.082-0.244]). Average surface roughness of low, medium, and highly differentiated OSCC tissues were 448.9 ± 54.8, 792.7 ± 83.6, and 993.0 ± 104.3 nm, respectively. The Pearson coefficient revealed a negative association between tumor stiffness and TROP2 expression (r = - 0.84, P < 0.01). CONCLUSION: Overexpression of TROP2 negatively associated with patient survival, degree of tumor differentiation, and tissue mechanics. Taken together, our findings demonstrated that TROP2 may be an indicator of OSCC differentiation leading to the altered mechanical properties of OSCC tissues.

Thermal Stability Enhancement through Structure Modification on the Microsized Crystalline Grain Surface of Lithium-Rich Layered Oxides.

Lithium-rich layered oxides have been considered as the most promising candidate for offering a high specific capacity and energy density for lithium-ion batteries. However, their practical applications are still suffered by the cycle instability and also closely related thermal stability. Here, microsized crystalline grains with good dispersion of lithium-rich layered oxides are prepared by a molten-salt method, while a spinel structure is also introduced on a grain surface by following chemical oxidation and annealing process, and their thermal performance with different cutoff voltages during the charge process is systematically studied using differential scanning calorimetry method. Results have shown that thermal stability of microsized crystalline grains is better than that of spherical secondary agglomerates, the spinel structure introduction on the grain surface of microsized crystalline grains can contribute obviously to their thermal stability, in which the onset temperature of the exothermic peak has been increased by 103 °C, and the thermal release value can be reduced as much as about 40% when the battery was charged to 4.8 V. Furthermore, the electrochemical performance, especially cycle stability under a high temperature, has also been enhanced for spinel-modified microsized crystalline grains. This work not only develops the microsized crystalline grains with good dispersion of lithium-rich layered oxides, confirming the advantages of these materials compared to spherical secondary agglomerates, but also reveals the method to improve their thermal stability by grain surface structure modification, opening the way to optimize the comprehensive performance of electrode materials for batteries.