Formulation and Scale-Up of Fast-Dissolving Lumefantrine Nanoparticles for Oral Malaria Therapy.

Lumefantrine (LMN) is one of the first-line drugs in the treatment of malaria due to its long circulation half-life, which results in enhanced effectiveness against drug-resistant strains of malaria. However, LMN's therapeutic efficacy is diminished due to its low bioavailability when dosed as a crystalline solid. The goal of this work was to produce low-cost, highly bioavailable, stable LMN powders for oral delivery that would be suitable for global health applications. We report the development of a LMN nanoparticle formulation and the translation of that formulation from laboratory to industrial scale. We applied Flash NanoPrecipitation (FNP) to develop nanoparticles with 90% LMN loading and sizes of 200-260 nm. The integrated process involves nanoparticle formation, concentration by tangential flow ultrafiltration, and then spray drying to obtain a dry powder. The final powders are readily redispersible and stable over accelerated aging conditions (50°C, 75% RH, open vial) for at least 4 weeks and give equivalent and fast drug release kinetics in both simulated fed and fasted state intestinal fluids, making them suitable for pediatric administration. The nanoparticle-based formulations increase the bioavailability of LMN 4.8-fold in vivo when compared to the control crystalline LMN. We describe the translation of the laboratory-scale process at Princeton University to the clinical manufacturing scale at WuXi AppTec.

Sequential Flash NanoPrecipitation for the scalable formulation of stable core-shell nanoparticles with core loadings up to 90.

Flash NanoPrecipitation (FNP) is a scalable, single-step process that uses rapid mixing to prepare nanoparticles with a hydrophobic core and amphiphilic stabilizing shell. Because the two steps of particle self-assembly - (1) core nucleation and growth and (2) adsorption of a stabilizing polymer onto the growing core surface - occur simultaneously during FNP, nanoparticles formulated at core loadings above approximately 70% typically exhibit poor stability or do not form at all. Additionally, a fundamental limit on the concentration of total solids that can be introduced into the FNP process has been reported previously. These limits are believed to share a common mechanism: entrainment of the stabilizing polymer into the growing particle core, leading to destabilization and aggregation. Here, we demonstrate a variation of FNP which separates the nucleation and stabilization steps of particle formation into separate sequential mixers. This scheme allows the hydrophobic core to nucleate and grow in the first mixing chamber unimpeded by adsorption of the stabilizing polymer, which is later introduced to the growing nuclei in the second mixer. Using this Sequential Flash NanoPrecipitation (SNaP) technique, we formulate stable nanoparticles with up to 90% core loading by mass and at 6-fold higher total input solids concentrations than typically reported.

Chemorepellent-Loaded Nanocarriers Promote Localized Interference of Escherichia coli Transport to Inhibit Biofilm Formation.

To mitigate antimicrobial resistance, we developed polymeric nanocarrier delivery of the chemorepellent signaling agent, nickel, to interfere with Escherichia coli transport to a surface, an incipient biofilm formation stage. The dynamics of nickel nanocarrier (Ni NC) chemorepellent release and induced chemorepellent response required to effectively modulate bacterial transport for biofilm prevention were characterized in this work. Ni NCs were fabricated with the established Flash NanoPrecipitation method. NC size was characterized with dynamic light scattering. Measured with a zincon monosodium salt colorimetric assay, NC nickel release was pH-dependent, with 62.5% of total encapsulated nickel released at pH 7 within 0-15 min, competitive with rapid E. coli transport to the surface. Confocal laser scanning microscopy of E. coli (GFP-expressing) biofilm growth dynamics on fluorescently labeled Ni NC coated glass coupled with a theoretical dynamical criterion probed the biofilm prevention outcomes of NC design. The Ni NC coating significantly reduced E. coli attachment compared to a soluble nickel coating and reduced E. coli biomass area by 61% compared to uncoated glass. A chemical-in-plug assay revealed Ni NCs induced a chemorepellent response in E. coli. A characteristic E. coli chemorepellent response was observed away from the Ni NC coated glass over 10 µm length scales effective to prevent incipient biofilm surface attachment. The dynamical criterion provided semiquantitative analysis of NC mechanisms to control biofilm and informed optimal chemorepellent release profiles to improve NC biofilm inhibition. This work is fundamental for dynamical informed design of biofilm-inhibiting chemorepellent-loaded NCs promising to mitigate the development of resistance and interfere with the transport of specific pathogens.

Tween® Preserves Enzyme Activity and Stability in PLGA Nanoparticles.

Enzymes, as natural and potentially long-term treatment options, have become one of the most sought-after pharmaceutical molecules to be delivered with nanoparticles (NPs); however, their instability during formulation often leads to underwhelming results. Various molecules, including the Tween® polysorbate series, have demonstrated enzyme activity protection but are often used uncontrolled without optimization. Here, poly(lactic-co-glycolic) acid (PLGA) NPs loaded with ß-glucosidase (ß-Glu) solutions containing Tween® 20, 60, or 80 were compared. Mixing the enzyme with Tween® pre-formulation had no effect on particle size or physical characteristics, but increased the amount of enzyme loaded. More importantly, NPs made with Tween® 20:enzyme solutions maintained significantly higher enzyme activity. Therefore, Tween® 20:enzyme solutions ranging from 60:1 to 2419:1 mol:mol were further analyzed. Isothermal titration calorimetry analysis demonstrated low affinity and unquantifiable binding between Tween® 20 and ß-Glu. Incorporating these solutions in NPs showed no effect on size, zeta potential, or morphology. The amount of enzyme and Tween® 20 in the NPs was constant for all samples, but a trend towards higher activity with higher molar rapports of Tween® 20:ß-Glu was observed. Finally, a burst release from NPs in the first hour with Tween®:ß-Glu solutions was the same as free enzyme, but the enzyme remained active longer in solution. These results highlight the importance of stabilizers during NP formulation and how optimizing their use to stabilize an enzyme can help researchers design more efficient and effective enzyme loaded NPs.

Microfluidic Technology for the Production of Hybrid Nanomedicines.

Microfluidic technologies have recently been applied as innovative methods for the production of a variety of nanomedicines (NMeds), demonstrating their potential on a global scale. The capacity to precisely control variables, such as the flow rate ratio, temperature, total flow rate, etc., allows for greater tunability of the NMed systems that are more standardized and automated than the ones obtained by well-known benchtop protocols. However, it is a crucial aspect to be able to obtain NMeds with the same characteristics of the previously optimized ones. In this study, we focused on the transfer of a production protocol for hybrid NMeds (H-NMeds) consisting of PLGA, Cholesterol, and Pluronic® F68 from a benchtop nanoprecipitation method to a microfluidic device. For this aim, we modified parameters such as the flow rate ratio, the concentration of core materials in the organic phase, and the ratio between PLGA and Cholesterol in the feeding organic phase. Outputs analysed were the chemico-physical properties, such as size, PDI, and surface charge, the composition in terms of %Cholesterol and residual %Pluronic® F68, their stability to lyophilization, and the morphology via atomic force and electron microscopy. On the basis of the results, even if microfluidic technology is one of the unique procedures to obtain industrial production of NMeds, we demonstrated that the translation from a benchtop method to a microfluidic one is not a simple transfer of already established parameters, with several variables to be taken into account and to be optimized.

Spinal pigmented villonodular synovitis and tenosynovial giant cell tumor: A report of two cases and a comprehensive systematic review.

BACKGROUND AND OBJECTIVE: Pigmented villonodular synovitis (PVNS) is a lesion of uncertain etiology that involves the synovial membranes of joints or tendon sheaths, representing a diffuse and non-encapsulated form of the more common giant cell tumors of the synovium (GCTTS). PVNS was reclassified to denote a diffuse form of synovial giant cell tumor (TSGCT), while 'giant cell tumor of the tendon sheath (GCTTS)' was used for localized lesions. These pathologies rarely affect the axial skeleton. We provide an unprecedented and extensive systematic review of both lesions highlighting presentation, diagnostic considerations, treatment, prognosis, and outcomes, and we report a short case-series. METHOD: We describe two-cases and conduct a systematic review in accordance with PRISMA guidelines. RESULT: PVNS was identified in most of the cases reviewed (91.6 %), manifesting predominantly in the cervical spine (40 %). Patients commonly presented with neck pain (59 %), back pain (53 %), and lower back pain (81.2 %) for cervical, thoracic, and lumbar lesions, respectively. GTR occurred at rates of 94 %, 80 %, and 87.5 %. Recurrence was most common in the lumbar region (30.7 %). GCTTS cases (8%) manifested in the cervical and thoracic spine at the same frequency. We reported first case of GCTTS in the lumbosacral region. Both poses high rate of facet and epidural involvements. CONCLUSION: Spinal PVNS and GCTTS are rare. These lesions manifest most commonly as PVNS within the cervical spine. Both types have a high rate of facet and epidural involvement, while PVNS has the highest rate of recurrence within the lumbar spine. The clinical and radiological features of these lesions make them difficult to differentiate from others with similar histogenesis, necessitating tissue diagnosis. Proper management via GTR resolves the lesion, with low rates of recurrence.

Correction: Enabling nanopore technology for sensing individual amino acids by a derivatization strategy.

Correction for 'Enabling nanopore technology for sensing individual amino acids by a derivatization strategy' by Xiaojun Wei et al., J. Mater. Chem. B, 2020, 8, 6792-6797, DOI: 10.1039/D0TB00895H.

Enabling nanopore technology for sensing individual amino acids by a derivatization strategy.

Nanopore technology holds remarkable promise for sequencing proteins and peptides. To achieve this, it is necessary to establish a characteristic profile for each individual amino acid through the statistical description of its translocation process. However, the subtle molecular differences among all twenty amino acids along with their unpredictable conformational changes at the nanopore sensing region result in very low distinguishability. Here we report the electrical sensing of individual amino acids using an α-hemolysin nanopore based on a derivatization strategy. Using derivatized amino acids as detection surrogates not only prolongs their interactions with the sensing region, but also improves their conformational variation. Furthermore, we show that distinct characteristics including current blockades and dwell times can be observed among all three classes of amino acids after 2,3-naphthalenedicarboxaldehyde (NDA)- and 2-naphthylisothiocyanate (NITC)-derivatization, respectively. These observable characteristics were applied towards the identification and differentiation of 9 of the 20 natural amino acids using their NITC derivatives. The method demonstrated herein will pave the way for the identification of all amino acids and further protein and peptide sequencing.

N-Terminal Derivatization-Assisted Identification of Individual Amino Acids Using a Biological Nanopore Sensor.

Nanopore technology has been employed as a powerful tool for DNA sequencing and analysis. To extend this method to peptide sequencing, a necessary step is to profile individual amino acids (AAs) through their nanopore stochastic signals, which remains a great challenge because of the low signal-to-noise ratio and unpredictable conformational changes of AAs during their translocation through nanopores. We showed that the combination of an N-terminal derivatization strategy of AAs with nanopore technology could lead to effective in situ differentiation of AAs. Four different derivatization reactions have been tested with five selected AAs: Ala, Phe, Tyr, His, and Asp. Using an α-hemolysin nanopore, we demonstrated the feasibility of derivatization-assisted identification of AAs regardless of their charge composition and polarity. The method was further applied to discriminate each individual AA in testing data sets using their established nanopore profiles from training data sets. We envision that this proof-of-concept study will not only pave a way for identification of individual AAs but also lead to future applications in protein/peptide sequencing using the nanopore technology.

Ring currents modulate optoelectronic properties of aromatic chromophores at 25 T.

The properties of organic molecules can be influenced by magnetic fields, and these magnetic field effects are diverse. They range from inducing nuclear Zeeman splitting for structural determination in NMR spectroscopy to polaron Zeeman splitting organic spintronics and organic magnetoresistance. A pervasive magnetic field effect on an aromatic molecule is the aromatic ring current, which can be thought of as an induction of a circular current of π-electrons upon the application of a magnetic field perpendicular to the π-system of the molecule. While in NMR spectroscopy the effects of ring currents on the chemical shifts of nearby protons are relatively well understood, and even predictable, the consequences of these modified electronic states on the spectroscopy of molecules has remained unknown. In this work, we find that photophysical properties of model phthalocyanine compounds and their aggregates display clear magnetic field dependences up to 25 T, with the aggregates showing more drastic magnetic field sensitivities depending on the intermolecular interactions with the amplification of ring currents in stacked aggregates. These observations are consistent with ring currents measured in NMR spectroscopy and simulated in time-dependent density functional theory calculations of magnetic field-dependent phthalocyanine monomer and dimer absorption spectra. We propose that ring currents in organic semiconductors, which commonly comprise aromatic moieties, may present new opportunities for the understanding and exploitation of combined optical, electronic, and magnetic properties.

Binary small molecule organic nanoparticles exhibit both direct and diffusion-limited ultrafast charge transfer with NIR excitation.

Here we describe a facile, one-step synthesis of a binary organic nanoparticle composed completely of NIR-absorbing small molecules, a quatterylene diimide and a vanadyl napthalocyanine, using Flash Nanoprecipitation. We show that the molecules are co-encapsulated within an amphiphilic block copolymer shell by observing distinct ultrafast dynamics in the binary nanoparticles compared to nanoparticles of their individual components, which we rationalize as a photoinduced charge transfer. We then draw similarities between the charge transfer dynamics studied in our system and the charge dissociation process in macroscale organic bulk heterojunction blends for OPV applications by assigning the ultrafast time component (∼10 ps) to direct interfacial charge transfer and the slow component (70-200 ps) to diffusion limited charge transfer. This discovery can inspire the development of mixed-composition nanoparticles with new functionality for optoelectronic and theranostic applications.

Copper Loading of Preformed Nanoparticles for PET-Imaging Applications.

Nanoparticles (NP) are promising contrast agents for positron emission tomography (PET) radionuclide imaging that can increase signal intensity by localizing clusters of PET radionuclides together. However, methods to load NPs with PET radionuclides suffer from harsh loading conditions or poor loading efficacies or result in NP surface modifications that alter targeting in vivo. We present the formation of water-dispersible, polyethylene glycol coated NPs that encapsulate phthalocyanines into NP cores at greater than 50 wt % loading, using the self-assembly technique Flash NanoPrecipitation. Particles from 70 to 160 nm are produced. Phthalocyanine NPs rapidly and spontaneously chelate metals under mild conditions and can act as sinks for PET radionuclides such as 64-Cu to produce PET-active NPs. NPs chelate copper(II) with characteristic rates of 1845 M-1 h-1 at pH 6 and 37 °C, which produced >90% radionuclide chelation within 1 h. NP physical properties, such as core composition, core fluidity, and size, can be tuned to modulate chelation kinetics. These NPs retain 64Cu even in the presence of the strong chelator ethylene diamine tetraacetic acid. The development of these constructs for rapid and facile radionuclide labeling expands the applications of NP-based PET imaging.

Conjugation of Transforming Growth Factor Beta to Antigen-Loaded Poly(lactide- co-glycolide) Nanoparticles Enhances Efficiency of Antigen-Specific Tolerance.

Current strategies for treating autoimmunity involve the administration of broad-acting immunosuppressive agents that impair healthy immunity. Intravenous (i.v.) administration of poly(lactide- co-glycolide) nanoparticles (NPs) containing disease-relevant antigens (Ag-NPs) have demonstrated antigen (Ag)-specific immune tolerance in models of autoimmunity. However, subcutaneous (s.c.) delivery of Ag-NPs has not been effective. This investigation tested the hypothesis that codelivery of the immunomodulatory cytokine, transforming growth factor beta 1 (TGF-ß), on Ag-NPs would modulate the immune response to Ag-NPs and improve the efficiency of tolerance induction. TGF-ß was coupled to the surface of Ag-NPs such that the loadings of Ag and TGF-ß were independently tunable. The particles demonstrated bioactive delivery of Ag and TGF-ß in vitro by reducing the inflammatory phenotype of bone marrow-derived dendritic cells and inducing regulatory T cells in a coculture system. Using an in vivo mouse model for multiple sclerosis, experimental autoimmune encephalomyelitis, TGF-ß codelivery on Ag-NPs resulted in improved efficacy at lower doses by i.v. administration and significantly reduced disease severity by s.c. administration. This study demonstrates that the codelivery of immunomodulatory cytokines on Ag-NPs may enhance the efficacy of Ag-specific tolerance therapies by programming Ag presenting cells for more efficient tolerance induction.

Controlled Delivery of Single or Multiple Antigens in Tolerogenic Nanoparticles Using Peptide-Polymer Bioconjugates.

Polymeric nanoparticles (NPs) have demonstrated their potential to induce antigen (Ag)-specific immunological tolerance in multiple immune models and are at various stages of commercial development. Association of Ag with NPs is typically achieved through surface coupling or encapsulation methods. However, these methods have limitations that include high polydispersity, uncontrollable Ag loading and release, and possible immunogenicity. Here, using antigenic peptides conjugated to poly(lactide-co-glycolide), we developed Ag-polymer conjugate NPs (acNPs) with modular loading of single or multiple Ags, negligible burst release, and minimally exposed surface Ag. Tolerogenic responses of acNPs were studied in vitro to decouple the role of NP size, concentration, and Ag loading on regulatory T cell (Treg) induction. CD4+CD25+Foxp3+ Treg induction was dependent on NP size, but CD25 expression of CD4+ T cells was not. NP concentration and Ag loading could be modulated to achieve maximal levels of Treg induction. In relapsing-remitting experimental autoimmune encephalomyelitis (R-EAE), a murine model of multiple sclerosis, acNPs were effective in inhibiting disease induced by a single peptide or multiple peptides. The acNPs provide a simple, modular, and well-defined platform, and the NP physicochemical properties offer potential to design and answer complex mechanistic questions surrounding NP-induced tolerance.