Graph-Based Pangenome of Actinidia chinensis Reveals Structural Variations Mediating Fruit Degreening.

Fruit ripening is associated with the degreening process (loss of chlorophyll) that occurs in most fruit species. Kiwifruit is one of the special species whose fruits may maintain green flesh by accumulating a large amount of chlorophyll even after ripening. However, little is known about the genetic variations related to the fruit degreening process. Here, a graph-based kiwifruit pangenome by analyzing 14 chromosome-scale haplotype-resolved genome assemblies from seven representative cultivars or lines in Actinidia chinensis is built. A total of 49,770 non-redundant gene families are identified, with core genes constituting 46.6%, and dispensable genes constituting 53.4%. A total of 84,591 non-redundant structural variations (SVs) are identified. The pangenome graph integrating both reference genome sequences and variant information facilitates the identification of SVs related to fruit color. The SV in the promoter of the AcBCM gene determines its high expression in the late developmental stage of fruits, which causes chlorophyll accumulation in the green-flesh fruits by post-translationally regulating AcSGR2, a key enzyme of chlorophyll catabolism. Taken together, a high-quality pangenome is constructed, unraveled numerous genetic variations, and identified a novel SV mediating fruit coloration and fruit quality, providing valuable information for further investigating genome evolution and domestication, QTL genes function, and genomics-assisted breeding.

Superhydrophobic, Highly Conductive, and Trilayered Fabric with Connected Carbon Nanotubes for Energy-Efficient Electrical Heating.

Current electrically heated fabrics provide heat in cold climates, suffer from abundant wasted radiant heat energy to the external environment, and are prone to damage by water. Thus, constructing energy-efficient and superhydrophobic conductive fabrics is in high demand. Therefore, we propose an effective and facile methodology to prepare a superhydrophobic, highly conductive, and trilayered fabric with a connected carbon nanotube (CNT) layer and a titanium dioxide (TiO2) nanoparticle heat-reflecting layer. We construct polyamide/fluorinated polyurethane (PA/FPU) nanofibrous membranes via first electrospinning, then performing blade-coating with the polyurethane (PU) solution with CNTs, and finally fabricating FPU/TiO2 nanoparticles via electrospraying. This strategy causes CNTs to be connected to form a conductive layer and enables TiO2 nanoparticles to be bound together to form a porous, heat-reflecting layer. As a consequence, the as-prepared membranes demonstrate high conductivity with an electrical conductivity of 63 S/m, exhibit rapid electric-heating capacity, and exhibit energy-efficient asymmetrical heating behavior, i.e., the heating temperature of the PA/FPU nanofibrous layer reaches more than 83 °C within 90 s at 24 V, while the heating temperature of the FPU/TiO2 layer only reaches 53 °C, as well as prominent superhydrophobicity with a water contact angle of 156°, indicating promising utility for the next generation of electrical heating textiles.

Oligodeoxynucleotides containing CpG motifs (CpG-ODN) restores immune regulatory functions of airway macrophages of patients with asthma.

Allergic asthma is characterized by the polarization of Th2 cells and impaired immune regulation. Macrophages occupy the largest proportion of airway immune cells. This study aims to discover the mechanism that hinders the immune regulatory functions of airway macrophages. In this study, macrophages were isolated from cells in bronchoalveolar lavage fluids (BALF) collected from asthma patients and normal control (NC) subjects. The results indicated that macrophages occupied the largest portion of the cellular components in BALF. The frequency of IL-10+ macrophage was significantly lower in asthma patients than in NC subjects. The expression of IL-10 in macrophages of BALF was associated with the levels of asthma-related parameters. The immune-suppressive functions of BALF M0 cells were defective in asthma patients. The inducibility of IL-10 expression was impaired in BALF macrophages of asthma patients, which could be restored by exposing to CpG. In conclusion, the induction of IL-10 in macrophages of BALF in asthma patients was impaired, and it could be restored by exposure to CpG.

Triple-layered core-shell fiber dressings with enduring platelet conservation and sustained growth factor release abilities for chronic wound healing.

Platelet-rich plasma (PRP) is one of the most popular biomaterials in regenerative medicine. However, the difficulties encountered in its preservation, and the requirement for on-demand preparation severely limit its application. In addition, its rapid degradation in the wound microenvironment makes the sustained release of growth factors impossible and finally reduces the therapeutic effect on chronic wounds. Here, a multifunctional dressing based on triple-layered core-shell fibers for loading and enduring preservation of PRP was developed using a one-step coaxial bioprinting technique combined with freeze-drying. The platelets were effectively dispersed and immobilized in the core layer of the fiber, leading to a sustained release of growth factors from the PRP. The rate of release can be controlled by adjusting the triple-layered core-shell structure. Simultaneously, the triple-layered core-shell structure can reduce the deactivation of PRP during freezing and storage. The experimental findings suggest that PRP exhibits sustained activity, facilitating the process of wound healing even after a storage period of 180 days. Furthermore, the protective mechanism of PRP by the triple-layered core-shell fiber was investigated, and the conditions for freeze-drying and storage were optimized, further enhancing the long-term storability of PRP. As a result, the multifunctional core-shell fiber dressings developed in this study offer a novel approach for sustained growth factor release and the enduring preservation of active PRP.

Haplotype-resolved genome assembly provides insights into evolutionary history of the Actinidia arguta tetraploid.

Actinidia arguta, known as hardy kiwifruit, is a widely cultivated species with distinct botanical characteristics such as small and smooth-fruited, rich in beneficial nutrients, rapid softening and tolerant to extremely low temperatures. It contains the most diverse ploidy types, including diploid, tetraploid, hexaploid, octoploid, and decaploid. Here we report a haplotype-resolved tetraploid genome (A. arguta cv. 'Longcheng No.2') containing four haplotypes, each with 40,859, 41,377, 39,833 and 39,222 protein-coding genes. We described the phased genome structure, synteny, and evolutionary analyses to identify and date possible WGD events. Ks calculations for both allelic and paralogous genes pairs throughout the assembled haplotypic individuals showed its tetraploidization is estimated to have formed ~ 1.03 Mya following Ad-α event occurred ~ 18.7 Mya. Detailed annotations of NBS-LRRs or CBFs highlight the importance of genetic variations coming about after polyploidization in underpinning ability of immune responses or environmental adaptability. WGCNA analysis of postharvest quality indicators in combination with transcriptome revealed several transcription factors were involved in regulating ripening kiwi berry texture. Taking together, the assembly of an A. arguta tetraploid genome provides valuable resources in deciphering complex genome structure and facilitating functional genomics studies and genetic improvement for kiwifruit and other crops.

CC chemokine receptors are prognostic indicators of gastric cancer and are associated with immune infiltration.

BACKGROUND: CC chemokine receptors are responsible for regulating the tumor microenvironment (TME) and participating in carcinogenesis and tumor advancement. However, no functional study has investigated CC chemokine receptors in gastric cancer (GC) prognosis, risk, immunotherapy, or other treatments. METHODS: We conducted a bioinformatics analysis on GC data using online databases, including the Human Protein Atlas (HPA), Kaplan-Meier (KM) plotter, GeneMANIA, MethSurv, the University of ALabama at Birmingham CANcer (UALCAN) Data Analysis Portal, Gene Set Cancer Analysis (GSCA), cBioportal, and Tumor IMmune Estimation Resource (TIMER). RESULTS: We noted that CC chemokine receptor expression correlated with survival in GC. CC chemokine receptor expression was also strongly linked to different tumor-infiltrating immune cells. Additionally, CC chemokine receptors were found to be broadly drug-resistant in GC. CONCLUSION: Our study identifed CC chemokine receptor expression helped in predicting the prognosis of patients diagnosed with GC. The expression level of the CC chemokine receptors was also positively related to multiple tumor-infiltrating lymphocytes (TILs). These findings provide evidence to monitor patients with GC using CC chemokine receptors, which can be used as an effective biomarker for predicting the disease prognosis and be regarded as a therapeutic target for modulating the tumor immune microenvironment.

First report of Fusarium ussurianum causing leaf spot on Hemerocallis citrina in Sichuan Basin of China.

Hemerocallis citrina is a popular vegetable crop in China, due to abundant nutrients in its edible flower buds. In March 2021, serious symptoms of leaf spot were observed on nearly 90% cultivated H. citrina seedlings in the fields of Dazhou city (31°17'56″ N, 107°31'59″ E), Sichuan, China. Symptomatic leaves were collected from 15 seedlings in five different sampling sites (3 seedlings per site). Small pieces (5 × 3 mm) of lesion margin were excised, surface disinfected in 70% ethanol for 20 s and 1% sodium hypochlorite (NaClO) for 40 s, washed, dried, placed on potato dextrose agar (PDA) amended with streptomycin sulfate (50 mg/L) and incubated in dark at 25 ℃ for two days. Finally, eight purified isolates, HHC-FL22, HHC-FL23, HHC-FL25, HHC-FL26, HHC-FL27, HHC-FL28, HHC-FL29 and HHC-FL30, showing similar morphology were obtained through transferring hyphal tips to fresh PDA plates. On PDA plates, mycelia were initially white but gradually became light yellow, and scarlet diffusible pigments were also produced with time. On carnation leaf agar, our isolates produced slightly curved macroconidia with 4 to 8 septa that measured 3.1 to 5.7 × 36.8 to 69.3 µm (n = 30). Microconidia and chlamydospores were not observed. Our isolates were initially identified as Fusarium species based on morphological features (Leslie and Summerell 2006). To further confirm accurate identity, primers EF1/EF2 (O'Donnell et al. 2010), TRI1015B/TRI1013E (Hao et al. 2017), RPB1-F5/RPB1-G2R (O'Donnell et al. 2010), and fRPB2-5F/fRPB2-11aR and RPB2-5f2/RPB2-7cr (O'Donnell et al. 2012) were used to amplify gene sequences of translation elongation factor-1 alpha (TEF1), 3-O-acetyltransferase (Tri101), and DNA-directed RNA polymerase II largest (RPB1) and second largest subunit (RPB2), respectively. Our sequences were deposited in GenBank under accession numbers OQ860946 to OQ860953 (TEF1), OR393245 to OR393252 (Tri101), OP131893 to OP131900 (RPB1), and OQ860954 to OQ860961 and OP131885 to OP131892 (RPB2), respectively. BLASTN searches of our sequences showed 99 ~ 100% identity with TEF1 (FJ240301.1), Tri101 (FJ240345.1), RPB1 (MW233297.1) and RPB2 (KM361666.1) of F. ussurianum NRRL 45681, and 99.05 ~ 100% identity with TEF1 (FJ240305.1) and Tri101 (FJ240349.1) of F. ussurianum NRRL 45833, respectively. Two independent maximum-likelihood phylogenetic trees based on different combined datasets of TEF1, Tri101, RPB1 and RPB2 of Fusarium species confirmed that our isolates were F. ussurianum. To test pathogenicity, conidial suspension from HHC-FL23 (106 conidia / mL) were sprayed to seedlings of cultivar "chuanhuanghua No.1" (n = 3) and incubated in a greenhouse (25°C under 90% relative humidity, 16/8 h light/dark cycle). Controls were treated with ddH2O. Ten days post-inoculation, natural symptoms appeared on leaves inoculated with HHC-FL23, but control group seedlings remained disease-free. This experiment was repeated three times. All re-isolated pathogens from diseased leaves were molecularly and morphologically identified using methods described above. Consequently, the re-isolated fungi were identical to these inoculated. The leaf spot disease could cause foliar damage and even drastic yield loss of flower buds under severe conditions. To our knowledge, this is the first report of F. ussurianum causing leaf spot in H. citrina worldwide. Our study will assist in monitoring causal agent diversity of leaf spot and breeding new resistant varieties in H. citrina.

A genome-wide association study of coat color in Chinese Rex rabbits.

Coat color is an important phenotypic characteristic of the domestic rabbit (Oryctolagus cuniculus) and has specific economic importance in the Rex rabbit industry. Coat color varies considerably among different populations of rabbits, and several causal genes for this variation have been thoroughly studied. Nevertheless, the candidate genes affecting coat color variation in Chinese Rex rabbits remained to be investigated. In this study, we collected blood samples from 250 Chinese Rex rabbits with six different coat colors. We performed genome sequencing using a restriction site-associated DNA sequencing approach. A total of 91,546 single nucleotide polymorphisms (SNPs), evenly distributed among 21 autosomes, were identified. Genome-wide association studies (GWAS) were performed using a mixed linear model, in which the individual polygenic effect was fitted as a random effect. We detected a total of 24 significant SNPs that were located within a genomic region on chromosome 4 (OCU4). After re-fitting the most significant SNP (OCU4:13,434,448, p = 1.31e-12) as a covariate, another near-significant SNP (OCU4:11,344,946, p = 7.03e-07) was still present. Hence, we conclude that the 2.1-Mb genomic region located between these two significant SNPs is significantly associated with coat color in Chinese Rex rabbits. The well-studied coat-color-associated agouti signaling protein (ASIP) gene is located within this region. Furthermore, low genetic differentiation was also observed among the six coat color varieties. In conclusion, our results confirmed that ASIP is a putative causal gene affecting coat color variation in Chinese Rex rabbits.

The transcription factor MYB43 antagonizes with ICE1 to regulate freezing tolerance in Arabidopsis.

Previous discovering meticulously illustrates the post-translational modifications and protein stability regulation of ICE1 and their role in cold stress. However, the studies on the interaction of ICE1 with other transcription factors, and their function in modulation cold stress tolerance, as well as in the transition between cold stress and growth are largely insufficient. In this work, we found that maltose binding protein (MBP) 43 directly binds to the promoters of CBF genes to repress their expression, thereby negatively regulating freezing tolerance. Biochemical and genetic analyses showed that MYB43 interacts and antagonizes with ICE1 to regulate the expression of CBF genes and plant's freezing stress tolerance. PLEIOTROPIC REGULATORY LOCUS 1 (PRL1) accumulates under cold stress and promotes MYB43 protein degradation; however, when cold stress disappears, PRL1 restores normal protein levels, causing MYB43 protein to re-accumulate to normal levels. Furthermore, PRL1 positively regulates freezing tolerance by promoting degradation of MYB43 to attenuate its repression of CBF genes and antagonism with ICE1. Thus, our study reveals that MYB43 inhibits CBF genes expression under normal growth condition, while PRL1 promotes MYB43 protein degradation to attenuate its repression of CBF genes and antagonism with ICE1, and thereby to the precise modulation of plant cold stress responses.

Platelet-rich plasma-loaded bioactive chitosan@sodium alginate@gelatin shell-core fibrous hydrogels with enhanced sustained release of growth factors for diabetic foot ulcer healing.

The ability of autologous platelet-rich plasma (PRP) gel to promote rapid wound healing without immunological rejection has opened new avenues for the treatment of diabetic foot wounds. However, PRP gel still suffers from the quick release of growth factors (GFs) and requires frequent administration, thus resulting in decreased wound healing efficiency, higher cost as well as greater pain and suffering for the patients. In this study, the flow-assisted dynamic physical cross-linked coaxial microfluidic three-dimensional (3D) bio-printing technology, combined with the calcium ion chemical dual cross-linking method was developed to design PRP-loaded bioactive multi-layer shell-core fibrous hydrogels. The prepared hydrogels exhibited outstanding water absorption-retention capacity, good biocompatibility as well as a broad-spectrum antibacterial effect. Compared with clinical PRP gel, these bioactive fibrous hydrogels displayed a sustained release of GFs, reducing the administration frequency by 33 % availably during the wound treatment, but more prominent therapeutic effects such as effective reduced inflammation, in addition to promoting the growth of granulation tissue and angiogenesis, the formation of high-density hair follicles, and the generation of regular ordered and high-density collagen fiber network, which suggested great promise as exceptional candidates for treatment of diabetic foot ulcer in clinical settings.

Regulatory module WRKY33-ATL31-IRT1 mediates cadmium tolerance in Arabidopsis.

Cadmium (Cd) is one of the most dangerous environmental pollutants among heavy metals, and threatens food safety and human health by accumulating in plant sink tissues. Here, we report a novel regulatory cascade that profoundly influences Cd tolerance in Arabidopsis. Phenotypic analysis showed that an insertional knockdown mutation at the Arabidopsis Tóxicos en Levadura 31 (ATL31) locus resulted in hypersensitivity to Cd stress, most likely due to a significant increase in Cd accumulation. Consistently, ATL31-overexpressing lines exhibited enhanced Cd stress tolerance and reduced Cd accumulation. Further, IRON-REGULATED TRANSPORTER 1 (IRT1) was identified, and yeast two-hybrid, co-immunoprecipitation and bimolecular fluorescence complementation assays demonstrated its interaction with ATL31. Biochemical, molecular, and genetic analyses showed that IRT1 is targeted by ATL31 for ubiquitin-conjugated degradation in response to Cd stress. Intriguingly, transcription of ATL31 was strongly induced by Cd stress. In addition, transgenic and molecular analyses showed that WRKY33 directly activated the transcription of ATL31 in response to Cd stress and positively regulated Cd tolerance. Genetic analysis indicated that ATL31 acts upstream of IRT1 and downstream of WRKY33 to regulate Cd tolerance. Our study revealed that the WRKY33-ATL31-IRT1 module plays a crucial role in timely blocking Cd absorption to prevent metal toxicity in Arabidopsis.

Biomimetic three-layer hierarchical scaffolds for efficient water management and cell recruitment.

Taking inspiration from the structures of roots, stems and leaves of trees in nature, a biomimetic three-layered scaffold was designed for efficient water management and cell recruitment. Using polycaprolactone (PCL) and polyacrylonitrile (PAN) as raw materials, radially oriented nanofiber films and multistage adjustable nanofiber films were prepared through electrospinning technology as the base skin-friendly layer (roots) and middle unidirectional moisture conductive material (stems), the porous polyurethane foam was integrated as the outer moisturizing layer (leaves). Among which, radially oriented nanofiber films could promote the directional migration of fibroblasts and induce cell morphological changes. For the spatially hierarchically nanofiber films, the unidirectional transport of liquid was effectively realized. While the porous polyurethane foam membrane could absorb 9 times its weight in biofluid and retain moisture for up to 10 h. As a result, the biomimetic three-layered scaffolds with different structures can promote wound epithelization and drain biofluid while avoiding wound inflammation caused by excessive biofluid, which is expected to be applied in the field of skin wounds.

Eupatilin attenuates the senescence of nucleus pulposus cells and mitigates intervertebral disc degeneration via inhibition of the MAPK/NF-κB signaling pathway.

Intervertebral disc degeneration (IDD) is the main cause of low back pain. An increasing number of studies have suggested that inflammatory response or the senescence of nucleus pulposus (NP) cells is strongly associated with the progress of IDD. Eupatilin, the main flavonoid extracted from Artemisia, was reported to be associated with the inhibition of the intracellular inflammatory response and the senescence of cells. However, the relationship between eupatilin and IDD is still unknown. In this study, we explored the role of eupatilin in tumor necrosis factor-α (TNF-α)-induced activation of inflammatory signaling pathways and NP cell senescence, in the anabolism and catabolism of NP cell extracellular matrix (ECM) and in the effect of the puncture-induced model of caudal IDD in the rat. In vitro, eupatilin significantly inhibited TNF-α-induced ECM degradation, downregulated the expression of related markers of NP cells (MMP3, MMP9, and MMP13), and upregulated the expression of SOX9 and COL2A1. Furthermore, eupatilin reduced TNF-α-induced cell senescence by inhibiting the expression of the senescence of NP cell-related markers (p21 and p53). Mechanistically, ECM degradation and cell senescence were reduced by eupatilin, which inhibited the activation of MAPK/NF-κB signaling pathways. Consistent with the in vitro data, eupatilin administration ameliorated the puncture-induced model of caudal IDD in the rat. In conclusion, eupatilin can inhibit the inflammatory response and the senescence of NP cells, which may be a novel treatment strategy for IDD.

Scutellarin ameliorates osteoarthritis by protecting chondrocytes and subchondral bone microstructure by inactivating NF-κB/MAPK signal transduction.

Osteoarthritis (OA), a chronic degenerative disease, is a major cause of pain, disability, and reduced quality of life among the elderly worldwide. The key to treating it is early prevention and effective intervention. The anti-inflammatory effects of scutellarin (SCU), a flavonoid derived from Erigeron breviscapus, have been increasingly reported. However, the mechanism by which SCU affects OA remains unclear. This study aimed to investigate the therapeutic effects and potential molecular mechanisms of SCU in the development of OA. Here, we found that SCU inhibited interleukin (IL)- 1ß-induced degradation of the extracellular matrix (ECM) of cartilage through the NF-kappaB/mitogen-activated protein kinases (NF-κB/MAPK) signaling pathway. In addition, in vivo data showed that SCU significantly reduced cartilage damage in the destabilization of the medial meniscus (DMM) mouse model and ovariectomy (OVX)-induced subchondral bone loss and cartilage degeneration in mice. In summary, our data showed that SCU is expected to become a potentially effective candidate treatment strategy for OA.

Tea GOLDEN2-LIKE genes enhance catechin biosynthesis through activating R2R3-MYB transcription factor.

The biosynthesis of catechins, a major type of flavonoids accumulated in tea, is mediated by developmental cues and environmental stimuli. Light enhances but shading treatment reduces catechin accumulation in tea leaves. However, the transcription factors involved in light-mediated catechin biosynthesis remain to be identified. Two GOLDEN2 LIKE genes from tea plant (CsGLK1 and CsGLK2) were isolated and characterized in both tomato and tea plants. Transcripts of both CsGLK1 and CsGLK2 were affected by light intensity in tea plants. Overexpression of CsGLK1 and CsGLK2 promoted chloroplast development and carotenoid accumulation in tomato fruits. An integrated metabolomic and transcriptomic approach revealed that both catechin content and related biosynthetic genes were upregulated in CsGLK-overexpressing tomato leaves. Our further studies in tea plants indicated that CsGLKs directly regulate the transcription of CsMYB5b, a transcription factor involved in catechin biosynthesis. Suppression of CsGLKs in tea leaves led to the reduction of both CsMYB5b expression and catechin accumulation. Taken together, the results show that CsGLKs are involved in light-regulated catechin accumulation in tea plants by regulating expression of CsMYB5b and have great potential for enhancing the accumulation of both carotenoids and flavonoids in fruits of horticultural crops.

A multifunctional 3D dressing unit based on the core-shell hydrogel microfiber for diabetic foot wound healing.

The healing mechanism of diabetic foot wounds is very complicated, and it is difficult for a single-function medical dressing to achieve good therapeutic effects. We propose a simple coaxial biological 3D printing technology, which uses one-step 3D deposition to continuously produce multifunctional medical dressings on the basis of core-shell hydrogel fibers. These dressings have good biocompatibility, controlled drug-release performance, excellent water absorption and retention, and antibacterial and anti-inflammatory functions. In vivo experiments with type 2 diabetic rats were performed over a 14-day period to compare the performance of the multifunctional 3D dressing with a gauze control; the multifunctional 3D dressing reduced inflammation, effectively increased the post-healing thickness of granulation tissue, and promoted the formation of blood vessels, hair follicles, and highly oriented collagen fiber networks. Therefore, the proposed multifunctional dressing is expected to be suitable for clinical applications for healing diabetic foot wounds.

Biparental genetic mapping reveals that CmCLAVATA3 (CmCLV3) is responsible for the variation in carpel number in melon (Cucumis melo L.).

KEY MESSAGES: Genetic analysis revealed that CmCLV3 is a candidate gene for the variation in melon carpel number. Carpel number (CN) is an important trait in melon. Three-CN melon fruit is oval, while 5-CN melon fruit has a round or flat shape. Herein, a genetic analysis of a population in which the CN locus was segregated indicated that 3-CN is controlled by a major dominant effective gene. Bulked segregant analysis and initial linkage mapping placed the CN locus in a 6.67 Mb region on chromosome 12, and it was narrowed to 882.19 kb with molecular markers and recombinant plants. Fine mapping with a large F2 population containing 1026 individuals further narrowed the locus to an 83.98 kb region harboring five annotated genes. Gene structure alignment between the parental lines revealed MELO3C035640.2 (annotated as CLAVATA3, CmCLV3) as the best candidate gene for the CN trait. CmCLV3 was more highly expressed in 3- than 5-CN lines and specifically expressed in terminal buds rather than in young leaves, hypocotyls, and roots. The CmCLV3 coding region was cloned from eight 3- or 5-CN melon accessions, and a nonsynonymous SNP site was highly correlated with CN variation. This SNP site was also related to CN variations among 40 melon lines according to their resequencing data, causing a helix alteration in the CmCLV3 protein. Promoter region sequence alignment and activity analysis showed that, unlike in cucumber and tomato, CmCLV3 promoter variation and activity were not the main reasons for CN alteration. Overall, this study provides a genetic resource for melon fruit development research and molecular breeding tools for melon CN improvement.

3D PCL/collagen nanofibrous medical dressing for one-time treatment of diabetic foot ulcers.

Nanofibrous dressings exhibit high specific surface areas, good histocompatibility, enhanced wound healing, and reduced inflammation, which have broad technological implications for treating diabetic foot ulcers (DFUs). However, current nanofibrous dressings still suffer from high resistance to cell infiltration and multiple dressing changes. In this study, polycaprolactone (PCL) and collagen were adopted as electrospinning materials to prepare a 3D PCL/Collagen (PC) nanofibrous dressing (3D-PC) using aqueous phase fibre reassembly technology. The matrix metalloproteinases (MMPs) inhibitor doxycycline hyclate (DCH)-loaded halloysite nanotubes (HNTs) (DCH@HNTs) and antibacterial agent cephalexin (CEX) were loaded onto the dressing to prepare a multifunctional 3D drug-loaded PCL/Collagen nanofibrous dressing to promote DFU wound healing. The obtained 3D nanofibrous dressing exhibited high water absorption capacity and swelling capacity. It showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro antibacterial test. In addition, the 3D nanofibrous dressing demonstrated good biocompatibility. It could significantly reduce the frequency of dressing changes and improve the healing of DFU wounds compared with the conventional multiple dressing changes method, suggesting a potential candidate for healing diabetic wounds.

Environmentally Friendly, Durably Waterproof, and Highly Breathable Fibrous Fabrics Prepared by One-Step Fluorine-Free Waterborne Coating.

Waterproof and breathable membranes (WBMs) have drawn broad attention due to their widespread applications in various scientific and industry fields. However, creating WBMs with environment-friendliness and high performance is still a critical and challenging task. Herein, an environmentally friendly fluorine-free WBM with high performance was prepared through electrospinning and one-step dip-coating technology. The fluorine-free waterborne hydroxyl acrylic resin (HAR) emulsion containing long hydrocarbon chains endowed the electrospun polyacrylonitrile/blocked isocyanate prepolymer (PAN/BIP) fibrous membranes with superior hydrophobicity; meanwhile, crosslinking agent BIP ensured strong chemical binding between hydrocarbon segments and fiber substrate. The as-prepared PAN/BIP@HAR fibrous membranes achieve ideal properties with waterproofness of 112.5 kPa and moisture permeability of 12.7 kg m-2 d-1, which are comparable to the existing high-performance fluorinated WBMs. Besides, the PAN/BIP@HAR membranes also display impressive tensile strength and durability. Significantly, the proposed technology was also applicable to other hydrophilic fiber substrates, such as cellulose acetate and polyamide 6. The successful synthesis of environmentally friendly, durably waterproof, and highly breathable PAN/BIP@HAR membranes not only opens a new avenue to materials design, but also provides promising candidates with tremendous potential in various areas.