High-nuclearity Luminescent Lanthanide Nanocages for Tumor Drug Delivery.

There is an unmet need for easy-to-visualize drug carriers that can deliver therapeutic cargoes deep into solid tumors. Herein, we report the preparation of ultrasmall luminescent imine-based lanthanide nanocages, Eu60 and Tb60 (collectively Ln60 ), designed to encapsulate anticancer chemotherapeutics for tumor therapy. The as-prepared nanocages possess large cavities suitable for the encapsulation of doxorubicin (DOX), yielding DOX@Ln60 nanocages with diameters around 5 nm. DOX@Ln60 are efficiently internalized by breast cancer cells, allowing the cells to be visualized via the intrinsic luminescent property of Ln(III). Once internalized, the acidic intracellular microenvironment promotes imine bond cleavage and the release of the loaded DOX. DOX@Ln60 inhibits DNA replication and triggers tumor cell apoptosis. In a murine triple negative breast cancer (TNBC) model, DOX@Ln60 was found to inhibit tumor growth with negligible side effects on normal tissues. It proved more effective than various controls, including DOX and Ln60 . The present nanocages thus point the way to the development of precise nanomedicines for tumor imaging and therapy.

Molecular Dynamics Simulation of Entangled Melts at High Rates: Identifying Entanglement Lockup Mechanism Leading to True Strain Hardening.

In the present work, molecular dynamics simulations are carried out based on the bead-spring model to indicate how the entanglement lockup manifests in the late stage of fast Rouse-Weissnberg number (WiR >>1) uniaxial melt stretching of entangled polymer melts. At high strains, distinct features show up to reveal the emergence of an increasingly tightened entanglement network. Chain tension can build up, peaking at the middle of the chain, to a level for chain scission, through accumulated interchain interactions, as if there is a tug-of-war ongoing for each load-bearing chain. Thanks to the interchain uncrossability, network junctions form by the pairing of two or more hairpins. It is hypothesized that the interchain entanglement at junctions can lockup through prevailing twist-like interchain couplings as long as WiR > 9. In this limit, a significant fraction of chains act like cyclic chains to form a network held by interchain uncrossability, and appreciable chain tension emerges.

Nanoconfined Crystallization in Poly(lactic acid) (PLA) and Poly(ethylene terephthalate) (PET) Induced by Various Forms of Premelt-Deformation.

The processing-structure-property relationship using poly(lactic acid) (PLA) and poly(ethylene terephthalate) (PET) is explored. Specifically, both pre-extension and preshear of amorphous PLA and PET above their glass transition temperatures Tg , carried out in the affine deformation limit, can induce a specific type of cold crystallization during annealing, i.e., nanoconfined crystallization (NCC) where crystal sizes are limited to a nanoscopic scale in all dimensions so as to render the processed PLA and PET optically transparent. The new polymer structure after premelt deformation can show considerably enhanced mechanical properties. For example, premelt stretching produces geometric condensation of the chain network. This structural alternation can profoundly change the mechanical characteristics, e.g., turning brittle PLA ductile. In contrast, after preshear of amorphous PLA above Tg , the NCC containing PLA remains brittle, showing the importance to have geometric condensation from processing. Both AFM imaging and SAXS measurements are performed to verify that premelt deformation of PLA and PET indeed results in NCC from annealing that permits the strain-induced cold crystallization to take place on the length scale of the mesh size of the deformed chain network.

Ti(IV)-MOF with Specific Facet-Ag Nanoparticle Composites for Enhancing the Photocatalytic Activity and Selectivity of CO2 Reduction.

Metal nanoparticles deposited in the photocatalyst not only can serve as a cocatalyst but also can act as a light harvester to extend the light absorption, resulting from the surface plasmon resonance (SPR). In this study, we deposited silver nanoparticles (Ag NPs) onto NH2-MIL-125(Ti) with exposed specific facets and achieved effectively improved activity and selectivity for photocatalytic CO2 reduction. Loading Ag NPs on the exposed {111} facets of NH2-MIL-125(Ti) generates a highly effective composite catalyst for the photoreduction of CO2, resulting in the maximal CO and CH4 yields of 26.7 and 63.3 µmol g-1 h-1, respectively, which are 2.2- and 16.2-fold those of the NH2-MIL-125(Ti) exposing {111} facets, and a CH4 selectivity of 90.5%. Incorporation of Ag NPs not only optimizes the electronic structure of the photocatalyst but also suppresses the recombination of photogenerated electron-hole pairs. This study provides an exciting example for creating and understanding metal-decorated facet-dependent effects on metal-organic frameworks (MOFs) for photocatalytic reactions.

Crystal transformation and self-assembly theory of microbially induced calcium carbonate precipitation.

Microbially induced calcium carbonate precipitation (MICP) is ubiquitous in the earth's lithosphere and brings the inspiration of bionic cementation technology. Over recent years, MICP has been proposed as a potential solution to address many environmental and engineering issues. However, the stability of cemented precipitations generated via MICP technology, especially the characteristics and change mechanism of crystal forms, is still unclear, which substantially hindered the understanding of biomineralization and prohibited the application and upscaling of MICP technology. Here, Sporosarcina pasteurii was selected as a model microbe to induce calcium carbonate mineralization in a series of standard nutrient solutions. The authors studied the process of precipitation from amorphous calcium carbonate to calcite crystal form and revealed the assembly behavior and mechanism of precipitations by FTIR, SEM, TEM and EDS. In the two crystal forms of induced calcium carbonate, the relative position and content of C, O, N, P and Ca elements were only slightly different. The molecular attachment and structural match of organic matrix made the crystals form change. Finally, a self-assembly theory was proposed to MICP, and it provided a solid theoretical basis for the technical specification of MICP technology in engineering application. KEY POINTS: • Organic matrix is intensively involved in MICP by forming functional groups. • Molecular attachment and structural match cause calcite crystal evolution. • A self-assembly theory is proposed for MICP.

Coordination Polymers with 2,2':6',2″-Terpyridine Earth-Abundant Metal Complex Units for Selective CO2 Photoreduction.

Combining molecular metal complexes into coordination polymers (CPs) is an effective strategy for developing photocatalysts for CO2 reduction; however, most such reported catalysts are noble metal-containing CPs. Herein, two novel Zr-containing bimetallic CPs, Co-Zr and Ni-Zr, were designed and successfully synthesized by connecting 2,2':6',2″-terpyridine-based molecular earth-abundant metal (Co or Ni) complexes with ZrO8 nodes. Both CPs were applied as catalysts for CO2 photoreduction to selectively produce CO. The catalytic performance of Co-Zr is better than that of Ni-Zr with a yield of 3654 µmol (g of catalyst)-1 for CO in 6 h (TON = 18.2). The difference between these two catalysts was analyzed with respect to band structure and charge migration ability. This work provides an effective way to introduce molecular earth-abundant metal complexes into coordination polymers for the construction of efficient noble metal-free CO2 photocatalysts.

Effect of the Defect Modulator and Ligand Length of Metal-Organic Frameworks on Carbon Dioxide Photoreduction.

The nature of defects and organic ligands can fine-tune the absorption energy (Eabs) of metal-organic frameworks (MOFs), which is crucial for photocatalytic reactions; however, the relevant studies are in their infancy. Herein, a series of typical MOFs of the UiO family (UiO-6x-NH2, x = 8, 7, and 6) with ligands of varied lengths and amino-group-modified defects were synthesized and employed to explore their performance for photocatalytic CO2 reduction. Sample UiO-66-NH2-2ABA (2ABA = 3,5-diamino-benzoate) with the shortest dicarboxylate ligand and two amino-group-modified defects exhibits superior photocatalytic activity due to the lowest Eabs. The CO yield photocatalyzed by UiO-66-NH2-2ABA is 17.5 µmol g-1 h-1, which is 2.4 times that of UiO-68-NH2-BA (BA = benzoate) with the longest ligand and no amino group involved in the defects. Both the experiments and theoretical calculations show that shorter dicarboxylate ligands and more amino groups result in smaller Eabs, which is favorable for photocatalytic reactions. This study provides new insights into boosting the photocatalytic efficiency by modulating the defects and ligands in MOFs.

Inducing nano-confined crystallization in PLLA and PET by elastic melt stretching.

Based on the widely studied poly(l-lactic acid) (PLLA) and polyethylene terephthalate (PET) that are brittle in their fully crystalline form, this Letter shows that they can be made to be super ductile, heat resistant and optically clear by creating nano-sized crystals while preserving the entanglement network. Atomic force microscopic images confirm the perceived nano-confined crystallization. Time-resolved X-ray scattering/diffraction measurements reveal the emergence of cold crystallization during either stress relaxation from large stepwise melt-stretching or annealing of pre-melt-stretched PLLA and PET above Tg. Mechanical tests show that these polymers in such a new state are rigid even well above Tg, e.g., at 100 °C.

Uncommon nonlinear rheological phenomenology in uniaxial extension of polystyrene solutions and melts.

This study examines nonlinear rheological responses to uniaxial extension of two entangled polystyrene (PS) solutions and two PS melts. Several unusual characteristics are revealed. The pair of the PS solutions have the same number of entanglements per chain (because of the same concentration) but well separated effective glass transition temperatures Tg. When examined at a common effective rate of extension (e.g., the same Rouse-Weissenberg number WiR) and at a comparable distance from their respective Tg, the solution A with lower Tg, examined at a lower temperature, shows stronger stress responses when WiR > 1. At the same test temperature and a common WiR, the solution A is still found to display a stronger stress response than the solution B that is made of the same fraction of parent PS in a second solvent also made of oligomeric PS of higher molecular weight. Finally, there are two features intrinsic to each of the four PS samples. First, at the same WiR they show reduced stress level at a lower temperature. Second, at sufficiently high applied Hencky rates, they show limiting rate behavior, i.e., undergoing the same melt rupture independent of the applied rate. These remarkable rheological responses indicate major theoretical difficulties facing the subject of nonlinear extensional rheology of entangled polymers.

Characterizing effects of fast melt deformation on entangled polymers in their glassy state.

Fast deformation of entangled melts is known to cause chain stretching due to affinelike straining of the entanglement network. Since the chain deformation may also result in perturbations of covalent bond angles and bond length, there are always possible enthalpic effects. In this study, we first subject polystyrene and PMMA of different molecular weights to either uniaxial melt extension or planar extension and subsequently impose rapid thermal quenching to preserve the chain deformation. Then, such pre-melt-deformed samples are annealed at various temperatures below the glass transition temperature Tg. During annealing, these samples can undergo appreciable contraction on a time scale much shorter than the alpha relaxation time. Significant retractive stress is observed when such contracting samples are held fixed during the annealing. The stress level can be nearly as high as the Cauchy stress produced during melt stretching. These observations not only allowed us to investigate glassy chain dynamics as well as the molecular nature of mechanical stress but may also suggest that pre-melt-stretched polymers can cause segmental mobilization in the glassy state. The available evidence indicates that the retractive stress is enthalpic in origin, associated with the conformational distortion at the bond level produced by melt stretching.

Illustrating the Molecular Origin of Mechanical Stress in Ductile Deformation of Polymer Glasses.

New experiments show that tensile stress vanishes shortly after preyield deformation of polymer glasses while tensile stress after postyield deformation stays high and relaxes on much longer time scales, thus hinting at a specific molecular origin of stress in ductile cold drawing: chain tension rather than intersegmental interactions. Molecular dynamics simulation based on a coarse-grained model for polystyrene confirms the conclusion that the chain network plays an essential role, causing the glassy state to yield and to respond with a high level of intrachain retractive stress. This identification sheds light on the future development regarding an improved theoretical account for molecular mechanics of polymer glasses and the molecular design of stronger polymeric materials to enhance their mechanical performance.

Correction: Finite cohesion due to chain entanglement in polymer melts.

Correction for 'Finite cohesion due to chain entanglement in polymer melts' by Shiwang Cheng et al., Soft Matter, 2016, 12, 3340-3351.

Correction: Nonlinear rheology of entangled polymers at turning point.

Correction for 'Nonlinear rheology of entangled polymers at turning point' by Shi-Qing Wang et al., Soft Matter, 2015, 11, 1454-1458.

Genipin-crosslinked O-carboxymethyl chitosan-gum Arabic coacervate as a pH-sensitive delivery system and microstructure characterization.

The possibility of genipin-crosslinked O-carboxymethyl chitosan-gum Arabic coacervate as a pH-sensitive delivery vehicle was investigated. O-carboxymethyl chitosan-gum Arabic coacervates separated in pH 3.0, 4.5, and 6.0 were crosslinked by genipin for different durations and the crosslinked products were subjected to crosslinking degree, swelling behavior, bovine serum albumin release profile, and microstructure characterization. Genipin-crosslinking greatly improved the stability of the coacervates against the simulated gastric solution and created certain pH-sensitivity. The coacervates displayed higher swelling ratios in the simulated gastric solution than in the simulated intestine and colon solutions; meanwhile, the coacervates prepared in pH 4.5 and 6.0 swelled more severely than the complex separated in pH 3.0. Nevertheless, the bovine serum albumin release in the simulated gastric solution from the microcapsules prepared in pH 6.0 was much lower than those prepared in pH 4.5 and 3.0, whose cumulative release percentages in the three simulated solutions were 17.14%, 55.23%, and 79.79%, respectively, in crosslinking duration 2 h. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analysis revealed that genipin-crosslinking improved the regularity and compactness of coacervate structure, whereas confocal laser scanning microscopy observation indicated that O-carboxymethyl chitosan content was possibly the major reason for the different swelling and bovine serum albumin release behavior of the coacervates. It was concluded that the genipin-crosslinked O-carboxymethyl chitosan-gum Arabic coacervate was a potential intestine-targeted delivery system and its delivery performance could be tailored by varying the crosslinking degree and coacervation acidity.

Finite cohesion due to chain entanglement in polymer melts.

Three different types of experiments, quiescent stress relaxation, delayed rate-switching during stress relaxation, and elastic recovery after step strain, are carried out in this work to elucidate the existence of a finite cohesion barrier against free chain retraction in entangled polymers. Our experiments show that there is little hastened stress relaxation from step-wise shear up to γ = 0.7 and step-wise extension up to the stretching ratio λ = 1.5 at any time before or after the Rouse time. In contrast, a noticeable stress drop stemming from the built-in barrier-free chain retraction is predicted using the GLaMM model. In other words, the experiment reveals a threshold magnitude of step-wise deformation below which the stress relaxation follows identical dynamics whereas the GLaMM or Doi-Edwards model indicates a monotonic acceleration of the stress relaxation dynamics as a function of the magnitude of the step-wise deformation. Furthermore, a sudden application of startup extension during different stages of stress relaxation after a step-wise extension, i.e. the delayed rate-switching experiment, shows that the geometric condensation of entanglement strands in the cross-sectional area survives beyond the reptation time τd that is over 100 times the Rouse time τR. Our results point to the existence of a cohesion barrier that can prevent free chain retraction upon moderate deformation in well-entangled polymer melts.

Shear banding in entangled polymers in the micron scale gap: a confocal-rheoscopic study.

Recent shear experiments in well-entangled polymer solutions demonstrated that interfacial wall slip is the only source of shear rate loss and there is no evidence of shear banding in the micron scale gap. In this work, we experimentally elucidate how molecular parameters such as slip length, b, influence shear inhomogeneity of entangled polybutadiene (PBD) solutions during shear in a small gap H ∼ 50 µm. Simultaneous rheometric and velocimetric measurements are performed on two PBD solutions with the same level of entanglements (Z = 54) in two PBD solvents with molecular weights of 1.5 kg mol(-1) and 10 kg mol(-1) that possess different levels of shear inhomogeneity (2bmax/H = 17 and 240). For the PBD solution made with a low molecular weight PBD solvent of 1.5 kg mol(-1), wall slip is the dominant response within the accessible range of the shear rate, i.e., up to the nominal Weissenberg number (Wi) as high as 290. On the other hand, wall slip is minimized using a high molecular-weight PBD solvent of 10 kg mol(-1) so that bulk shear banding is observed to take place in the steady state for Wi > 100. Finally, these findings and previous results are in good agreement with our recently proposed phase diagram in the parameter space of apparent Wi versus 2bmax/H suggesting that shear banding develops across the micron scale gap when the imposed Wi exceeds 2bmax/H [Wang et al., Macromolecules, 2011, 44, 183].

Nonlinear rheology of entangled polymers at turning point.

Thanks to extensive observations of strain localization upon startup or after stepwise shear, a conceptual framework for nonlinear rheology of entangled polymers appears to have emerged that has led to discovery of many new phenomena, which were not previously predicted by the standard tube model. On the other hand, the published theoretical and experimental attempts to test the limits of the tube model have largely demonstrated that the most experimental data appear consistent with the tube-model based theoretical calculations. Therefore, the field of nonlinear rheology of entangled polymers is at a turning point and is thus a rather crucial area in which further examinations are needed. In particular, more molecular dynamics simulations are needed to delineate the detailed molecular mechanisms for the various nonlinear rheological phenomena.

Correction: Nonlinear rheology of entangled polymers at turning point.

Correction for 'Nonlinear rheology of entangled polymers at turning point' by Shi-Qing Wang et al., Soft Matter, 2015, DOI: 10.1039/c4sm02664k.