Investigating the efficacy of acupuncture in treating patients with metabolic-associated fatty liver disease: a protocol for a randomised controlled clinical trial.

INTRODUCTION: Acupuncture is widely used for metabolic-associated fatty liver disease (MAFLD) treatment; however, the clinical efficacy has not been confirmed due to the lack of high-level evidence-based clinical practice. The purpose of this study is to design a research protocol that will be used to determine the efficacy of acupuncture versus sham acupuncture (SHA) for MAFLD treatment. METHODS AND ANALYSIS: This will be a multicentre, randomised and sham-controlled trial. Ninety-eight participants with MAFLD will be enrolled in this trial. Participants will be randomly assigned in a 1:1 ratio to receive acupuncture or SHA for 12 weeks. The primary outcome is the rate of patients with a 30% relative decline in liver fat after 12 weeks of treatment in MRI-proton density fat fraction (MRI-PDFF), which will be obtained by quantitative chemical shift imaging such as the multipoint Dixon method at 0, 12 and 24 weeks. Secondary outcomes include the changes in the relative liver fat content measured by MRI-PDFF, magnetic resonance elastography, liver function, lipid metabolism, homeostatic model assessment for insulin resistance (HOMA-IR) and serum high sensitivity C reactive protein, which will be obtained at 0, 6, 12 and 24 weeks. Body measurement indicators (body mass index, waist circumference, hip circumference and waist-to-hip ratio) will be obtained at 0, 3, 6, 9, 12 and 24 weeks. The alteration in the gut microbiota composition and its metabolism will be assessed by 16S ribosomal RNA sequencing and liquid chromatography-mass spectrometry at 0 and 12 weeks. ETHICS AND DISSEMINATION: This study protocol has been approved by the ethics committee of Shuguang Hospital Affiliated to Shanghai University of Traditional Chinese Medicine (2023-1347-114-01). The results of this study will be published in a peer-reviewed journal and presented at academic conferences. TRIAL REGISTRATION NUMBER: ChiCTR2300075701.

Dynamic Reconstruction of Yttrium Oxide-Stabilized Cobalt-Loaded Carbon-Based Catalysts During Thermal Ammonia Decomposition.

Hydrogen production from the decomposition of ammonia is considered an effective approach for addressing challenges associated with hydrogen storage and transportation. However, their relatively high energy consumption and low efficiency hinder practical multi-scenario applications. In this study, Y2O3-stabilized catalysts with Co-loaded onto porous nitrogen-doped carbon (Y2O3-Co/NC) are synthesized by pyrolysis of Y(NO3)3-modified ZIF-67 under an inert atmosphere, followed by annealing in a reducing environment. The introduction of Y2O3 enhanced the recombination and desorption of N atoms and facilitated the gradual dehydrogenation of NHx on the catalyst surface, resulting in improved catalytic activity for the thermal decomposition of ammonia. Benefitting from the electron-donating properties of Y2O3 and N-doped carbon, the optimized catalyst achieved a remarkable NH3 conversion efficiency of 92.3% at a high gas hourly space velocity of 20 000 cm3· g cat - 1 ${\mathrm{g}}_{{\mathrm{cat}}}^{ - {\mathrm{1}}}$ ·h-1 with an encouraging H2 production rate of 20.6 mmol· g cat - 1 ${\mathrm{g}}_{{\mathrm{cat}}}^{ - {\mathrm{1}}}$ ·min-1 at 550 °C. Moreover, the synthesized catalyst undergoes a fast-dynamic reconstruction process, resulting in exceptionally stable catalytic activity during the thermal decomposition of ammonia, rendering it a promising candidate for carbon-free energy thermocatalytic conversion technology.

Encapsulated lactiplantibacillus plantarum improves Alzheimer's symptoms in APP/PS1 mice.

BACKGROUND: Alzheimer's disease (AD) is a neurodegenerative disorder that can result in neurotoxicity and an imbalance in gut microbiota. Probiotics have been shown to play an important role in regulating the gut microbiota, but their viability and bioactivity are often compromised as they traverse the gastrointestinal tract, thereby reducing their efficacy and limiting their clinical utility. RESULTS: In this work, layer-by-layer (LbL) encapsulation technology was used to encapsulate Lactiplantibacillus plantarum (LP) to improve the above shortcomings. Studies in APPswe/PS1dE9 (APP/PS1) transgenic mice show that LbL-encapsulated LP ((CS/SP)2-LP) protects LP from gastrointestinal damage while (CS/SP)2-LP treatment It improves brain neuroinflammation and neuronal damage in AD mice, reduces Aß deposition, improves tau protein phosphorylation levels, and restores intestinal barrier damage in AD mice. In addition, post-synaptic density protein 95 (PSD-95) expression increased in AD mice after treatment, indicating enhanced synaptic plasticity. Fecal metabolomic and microbiological analyzes showed that the disordered intestinal microbiota composition of AD mice was restored and short-chain fatty acids (SCFAs) levels were significantly increased after (CS/SP)2-LP treatment. CONCLUSION: Overall, the above evidence suggests that (CS/SP)2-LP can improve AD symptoms by restoring the balance of intestinal microbiota, and (CS/SP)2-LP treatment will provide a new method to improve the symptoms of AD patients.

Unraveling the causative connection between urticaria, inflammatory cytokines, and mental disorders: Perspectives from genetic evidence.

BACKGROUND: The genetic association between urticaria and mental disorders and whether inflammatory cytokines mediate this process remains unclear. MATERIALS AND METHODS: A Mendelian randomization (MR) approaches to elucidate the causal relationship between urticaria and mental disorders and to validate the mediation of inflammatory cytokines. Genome-wide association study (GWAS) databases used were obtained from Psychiatric Genomics Cooperation (PGC), GWAS Catalog, and FinnGen Consortium. Our study was conducted using inverse variance weighted (IVW) and Bayesian weighted MR (BWMR) methods for joint analysis. RESULTS: The MR results showed that urticaria increased the risk of attention deficit hyperactivity disorder (ADHD) (odds ratio [OR] = $ = $ 1.088, 95% confidence interval [CI]: 1.026-1.154, p = $ = $ 0.0051); cholinergic urticaria increased the risk of bipolar disorder (BD) (OR = $ = $ 1.012, 95% CI: 1.001-1.022, p = $ = $ 0.0274); dermatographic urticaria increased the risk of ADHD (OR = $ = $ 1.057, 95% CI: 1.005-1.112, p = $ = $ 0.0323); idiopathic urticaria increased the risk of schizophrenia (SCZ) (OR = $ = $ 1.057, 95% CI: 1.005-1.112, p = $ = $ 0.0323); other unspecified urticaria increased the risk of ADHD (OR = $ = $ 1.085, 95% CI: 1.023-1.151, p = $ = $ 0.0063). We found that eight inflammatory cytokines were negatively associated with mental disorders and seven inflammatory cytokines were positively associated with mental disorders. Finally, our results suggested that inflammatory cytokines do not act as mediators between urticaria and mental disorders. CONCLUSIONS: Our study reveals a causal relationship between urticaria and the increased risk of mental disorders. We suggest that the treatment of urticaria could incorporate psychiatric interventions and mental health assessment of patients.

Insights into the response mechanisms of Tetradesmus obliquus to aged polylactic acid and tetracycline exposure via transcriptome analysis and physiological evaluations.

Microplastics (MPs) and antibiotics, identified as emerging pollutants, are extensively prevalent in aquatic environments and display prolonged durability. Unlike conventional plastics, biodegradable plastics are more susceptible to decomposition in the environment, resulting in the generation of microplastics and posing potential risks to the aquatic ecosystems. In this study, we assessed growth inhibition, chlorophyll a content, malondialdehyde content (MDA), and antioxidant enzyme activities. These measurements were integrated with transcriptome analysis to explore the response mechanisms of virgin and aged polylactic acid (vPLA and aPLA) and tetracycline (TC) following 14-day exposure to Tetradesmus obliquus, either individually or in combination. The findings indicated that exposure to vPLA did not significantly impact the growth of T. obliquus. Conversely, aPLA demonstrated growth-promoting effects on T. obliquus, particularly in the latter incubation stages. Moreover, a 14-day exposure significantly increased the chlorophyll a content and the activities of superoxide dismutase (SOD), catalase glutathione (CAT) and glutathione S-transferase (GST) within the algal cells. Apart from 1 mg L-1, the TC concentrations of 2.5, 5.0, and 10 mg L-1 exhibited significant toxic effects on T. obliquus, including growth inhibition, decreased chlorophyll a content, elevated activities of SOD, CAT, and GST, and increased MDA levels. Exposure to a combination of 300 mg L-1 aPLA and 5.0 mg L-1 TC, compared to solely 5 mg L-1 TC, demonstrated a notable reduction in TC toxicity to T. obliquus in the presence of aPLA. This was indicated by elevated algal cell density and chlorophyll a content, as well as a decrease in MDA content. Transcriptome analysis indicated an enrichment of differentially expressed genes (DEGs) in pathways linked to porphyrin metabolism, photosynthesis, carbon fixation, and metabolism within the aPLA + TC combined exposure. The study aid in expanding our knowledge of the potential ecological risks posed by biodegradable plastics and accompanying pollutants in aquatic environments.

Designing antiperovskite derivatives via atomic-position splitting for photovoltaic applications.

Due to the success of halide perovskites in the photovoltaic field, halide perovskite-derived semiconductors have also been widely studied for optoelectronic applications. However, the photovoltaic performance of these perovskite derivatives still lags significantly behind their perovskite counterparts, mainly due to deficiencies at the B-site or X-site of the derivatives, which disrupt the connectivity of the key [BX6] octahedra units. Herein, we developed a class of antiperovskite-derived materials with the formula , achieved by splitting the A anion, originally at the corner site of the cubic antiperovskite structure, into three edge-centered sites. This structural transformation maintains the three-dimensional octahedral framework. The thermodynamic stability, dynamical stability, and band gaps of 80 compounds were calculated using first-principles calculations. Based on criteria including stability and electronic properties, we identified 9 promising antiperovskite derivatives for further evaluation of their photovoltaic performance. Notably, the calculated theoretical maximum efficiencies of Ba3BiI3, Ba3SbI3, and Ba3BiBr3 all exceed 24.5%, which is comparable to that of CH3NH3PbI3 solar cells. Interpretable machine learning analysis was further carried out to identify critical physical descriptors influencing thermodynamic stability and band gap. Our work provides a novel approach for designing high performance perovskite-type structure-inspired semiconductors with potential for optoelectronic applications.

Effect of cooking methods on volatile compounds and texture properties in millet porridge.

To instruct the production of millet porridge, the effect of cooking methods on flavor and texture of millet porridge was investigated. A total of 91 volatiles were detected and most volatile compounds decreased with cooking time, e.g. alcohols. The esters as major volatiles had a high content in electric rice cooker (IC). Multiple chemometric results indicated that volatiles from different cooking methods were distinguished respectively. Texture analysis indicated that the hardness of millet porridge prepared in IC had a more dominant decrease trend than electromagnetic oven and the electric pressure cooker before 40 min. In conclusion, different cooking methods had a more significant influence on the volatiles than cooking time, while the texture is opposite. The comprehensive sensory score reached its peak in IC-30 min. The comprehensive sensory scores of IC and EC decreased with the prolongation of cooking time. This study helps to improve the sensory attributes of millet porridge.

Accelerated aging behavior of degradable and non-degradable microplastics via advanced oxidation and their adsorption characteristics towards tetracycline.

The increasing global utilization of biodegradable plastics due to stringent regulations on traditional plastics has caused a significant rise in microplastic (MPs) pollution in aquatic ecosystems from biodegradable products. However, the environmental behavior of biodegradable MPs remains inadequately elucidated. This study explored the aging processes of polylactic acid (PLA) and polystyrene (PS) under a heat-activated potassium persulfate (K2S2O8) system, as well as their adsorption characteristics towards tetracycline (TCs). In comparison to PS, the surface structure of PLA experienced more pronounced changes over aging, exhibiting evident pits, cracks, and fragmentation. The carbonyl index (CI) and oxygen/carbon ratio (O/C) of PS displayed exponential growth over time, whereas the values for PLA showed linear and exponential increases, respectively. The adsorption capacity of TCs by PS and PLA aged for 6 days increased from 0.312 mg‧g-1 and 0.457 mg‧g-1for original PS and PLA, respectively, to 0.372 mg‧g-1 and 0.649 mg‧g-1. Meanwhile, the adsorption rate (k2 values) for TCs decreased by 42.03 % for PS and 79.64 % for PLA compared to their initial values. The findings indicated that biodegradable PLA-MPs may exhibit higher tetracycline carrying capacities than PS, potentially increasing environmental and organismal risks, particularly in view of aging effects.

Superior nitrate and chromium reduction synergistically driven by multiple electron donors: Performance and the related biochemical mechanism.

Nitrate and Cr(VI) are the typical and prevalent co-contaminants in the groundwater, how to synchronously and effectively diminish them has received growing attention. The most problem that currently limits the nitrate and Cr(VI) reduction technology for groundwater remediation is with emphasis on exploring the optimal electron donors. This study investigated the feasibility of utilizing the synergistical effect of inorganic electron donors (pyrite, sulfur) and inherently limited organics to promote synchronous nitrate and Cr(VI) removal, which meets the requirement of naturally low-carbon and eco-friendly technologies. The NO3--N and Cr(VI) removal efficiencies in the pyrite and sulfur involved mixotrophic biofilter (PS-BF: approximately 90.8 ± 0.6% and 99.1 ± 2.1%) were substantially higher than that in a volcanic rock supported biofilter (V-BF: about 49.6% ± 2.8% and 50.0% ± 9.3%), which was consistent with the spatial variations of their concentrations. Abiotic and biotic batch tests directly confirmed the decisive role of pyrite and sulfur for NO3--N and Cr(VI) removal via chemical and microbial pathways. A server decline in sulfate production correlated with decreasing COD consumption revealed that there was sulfur disproportionation induced by limited organics. Metagenomic analysis suggested that chemoautotrophic microbes like Sulfuritalea and Thiobacillus were key players responsible for sulfur oxidation, nitrate and Cr(VI) reduction. The metabolic pathway analysis suggested that genes encoding functional enzymes related to complete denitrification, S oxidation, and dissimilatory sulfate reduction were upregulated, however, genes encoding Cr(VI) reduction enzymes (e.g. chrA, chrR, nemA, and azoR) were downregulated in PS-BF, which further explained the synergistical effect of multiple electron donors. These findings provide insights into their potential cooperative interaction of multiple electron donors on greatly promoting nitrate and Cr(VI) removal and have implications for the remediation technology of nitrate and Cr(VI) co-contaminated groundwater.

Ultrasound-induced structural changes in partial nitrification sludge: Unravelling the mechanism for improved nitrogen removal.

Low-intensity ultrasound, as a form of biological enhancement technology, holds significant importance in the field of biological nitrogen removal. This study utilized low-intensity ultrasound (200 W, 6 min) to enhance partial nitrification and investigated its impact on sludge structure, as well as the internal relationship between structure and properties. The results demonstrated that ultrasound induced a higher concentration of nitrite in the effluent (40.16 > 24.48 mg/L), accompanied by a 67.76% increase in the activity of ammonia monooxygenase (AMO) and a 41.12% increase in the activity of hydroxylamine oxidoreductase (HAO), benefiting the partial nitrification. Based on the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theoretical analysis, ultrasonic treatment enhanced the electrostatic interaction energy (WR) between sludge flocs, raising the total interaction energy from 46.26 kT to 185.54 kT, thereby causing sludge dispersion. This structural alteration was primarily attributed to the fact that the tightly bonded extracellular polymer (TB-EPS) after ultrasound was found to increase hydrophilicity and negative charge, weakening the adsorption between sludge cells. In summary, this study elucidated that the change in sludge structure caused by ultrasonic treatment has the potential to enhance the nitrogen removal performance by partial nitrification.

A Superior Bifunctional Electrocatalyst in Which Directional Electron Transfer Occurs Between a Co/Ni Alloy and Fe─N─C Support.

Stable, efficient, and economical bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are needed for rechargeable Zn-air batteries. In this study, a directional electron transfer pathway is exploited in a spatial heterojunction of CoyNix@Fe─N─C heterogeneous catalyst for effective bifunctional electrolysis (OER/ORR). Thereinto, the Co/Ni alloy is strongly coupled to the Fe─N─C support through Co/Ni─N bonds. DFT calculations and experimental findings confirm that Co/Ni─N bonds play a bridging role in the directional electron transfer from Co/Ni alloy to the Fe─N─C support, increasing the content of pyridinic nitrogen in the ORR-active support. In addition, the discovered directional electron transfer mechanism enhances both the ORR/OER activity and the durability of the catalyst. The Co0.66Ni0.34@Fe─N─C with the optimal Ni/Co ratio exhibits satisfying bifunctional electrocatalytic performance, requiring an ORR half-wave potential of 0.90 V and an OER overpotential of 317 mV at 10 mA cm-2 in alkaline electrolytes. The assembled rechargeable zinc-air batteries (ZABs) incorporating Co0.66Ni0.34@Fe─N─C cathode exhibits a charge-discharge voltage gap comparable to the Pt/C||IrO2 assembly and high robustness for over 60 h at 20 mA cm-2.

Easy-to-Lay Poly-N Heterocyclic Additives Enable Long-Term Stabilization of Zinc-Ion Capacitor Anodes under Deep Plating/Stripping.

Addition of organic compounds containing O/N heteroatoms to aqueous electrolytes such as ZnSO4 (ZS) solutions is one of the effective strategies to inhibit Zn anode dendrites and side reactions. However, addressing the stability of Zn plating/stripping at high current densities and areal capacities by this method is still a challenge, especially in capacitors known for high power and long life. Herein, an organic heterocyclic compound of 1, 4, 7, 10-tetraazacyclododecane (TC) containing four symmetrically distributed N atoms is employed as ZS additive, expanding the life of Zn anodes from ≈ 30 h to 1000 and 240 h at deep plating/stripping conditions of 10 and 20 mA cm-2/mAh cm-2, respectively; the cumulative capacity is as high as 5.0 Ah cm-2 with 99% Coulombic efficiency, far exceeding reported additives. TC with higher binding energies than H2O for Zn species tends to adsorb to Zn (002) in a lying manner and participate in the solvation shell of Zn2+, thus avoiding Zn dendrites and side-reaction damage, especially at high current densities. The TC-endowed Zn anode's stability under such extreme conditions is verified in Zn-ion capacitors (i.e., > 94.6% capacity retention after 28 000 cycles), providing new insights into the development of high-power Zn-based energy storage devices.

Effect of cooking methods on volatile compounds and texture properties in maize porridge.

To investigate the optimal processing of maize porridge, the volatile compounds and texture under different cooking methods and time have been studied. A total of 51 volatile compounds were identified in maize porridge. Notably, the major volatiles, aldehydes and esters exhibited a relatively high content in electric pressure cooker (EPC), and esters tend to significantly increase after cooking. Among aldehydes, nonanal and hexanal played a great role in flavor due to their relatively high content. Volatile compounds of maize porridge in different cooking methods could be clearly distinguished by multiple chemometrics. Furthermore, texture analysis revealed that almost all the indicators in the EPC can reach the lowest value at 60 min. To summarize, different cooking methods had a more significant influence on the volatile compounds and texture compared to time. This study helps to improve the sensory attributes of maize porridge, and thus contributes to healthier and more sustainable production.

A first-principles study on the promising thermoelectric properties of SnX (X = S, Se, Te) compounds.

SnSe has emerged as an outstanding thermoelectric material due to its exceptional performance. In this study, first-principles calculations are employed to investigate the thermoelectric properties of materials within the SnX family, where X can be either S, Se, or Te. Initially, we assessed the stability of SnX (X = S, Se, Te). We found that SnS exhibits better mechanical and thermal stability than SnSe and SnTe. We then conduct phonon and electronic transport analysis. Following the general rule that heavier atoms have lower thermal conductivity, SnTe demonstrates lower thermal conductivity due to its low group velocity compared with SnS and SnSe. Regarding electrical transport properties, the band gaps for SnS, SnSe, and SnTe are 0.56, 0.54, and 0.35 eV, respectively. Notably, the small band gap and higher degeneracy in its band valleys for SnTe make it more effective for achieving a high power factor. The maximum ZT values are determined to be 1.41, 1.41, and 1.87 for SnS, SnSe, and SnTe, respectively. Remarkably, ZTmax of SnTe exceeds that of SnSe by 32.6%. Overall, the results clearly demonstrate that SnTe exhibits superior thermoelectric properties compared to SnSe and SnS. This study provides valuable insights into the electronic structure, thermal conductivity, and mechanical and thermal stability of materials within the SnSe family, such as SnS or SnTe, without the need for extensive and costly experimental work.

Elucidation of Spatial Cooperativity in Chemo-Immunotherapy by a Sequential Dual-pH-Responsive Drug Delivery System.

Combining immune checkpoint blockade with chemotherapy through nanotechnology is promising in terms of safety and efficacy. However, the distinct subcellular distribution of each ingredient's action site makes it challenging to acquire an optimal synergism. Herein, a dual-pH responsive hybrid polymeric micelle system, HNP(αPDL16.9, Dox5.3), is constructed as a proof-of-concept for the spatial cooperativity in chemo-immunotherapy. HNP retains the inherent pH-transition of each polymer, with stepwise disassembly under discrete pH thresholds. Within weakly acidic extracellular tumor environment, αPDL1 is first released to block the checkpoint on cell membranes. The remaining intact Doxorubicin-loaded micelle NP(Dox)5.3 displays significant tropism toward tumor cells and releases Dox upon lysosomal pH for efficient tumor immunogenic cell death without immune toxicity. This sequential-released pattern boosts DC activation and primes CD8+ T cells, leading to enhanced therapeutic performance than single agent or an inverse-ordered combination in multiple murine tumor models. Using HNP, the indispensable role of conventional type 1 DC (cDC1) is identified in chemo-immunotherapy. A co-signature of cDC1 and CD8 correlates with cancer patient survival after neoadjuvant Pembrolizumab plus chemotherapy in clinic. This study highlights spatial cooperativity of chemo- and immuno-agents in immunoregulation and provides insights into the rational design of drug combination for future nanotherapeutics development.

Aqueous Cellulose Solution Adhesive.

In the context of sustainable development, research on a biomass-based adhesive without chemical modification as a substitute for petroleum-based adhesive is now crucial. It turns out to be challenging to guarantee a simple and sustainable method to produce high-quality adhesives and subsequently manufacture multifunctional composites. Herein, the inherent properties of cellulose were exploited to generate an adhesive based on a cellulose aqueous solution. The adhesion is simple to prepare structurally and functionally complex materials in a single process. Cellulose-based daily necessities including straws, bags, and cups were prepared by adhering cellulose films, and smart devices like actuators and supercapacitors assembled by adhering hydrogels were also demonstrated. In addition, the composite boards bonded with natural biomass wastes, such as wood chips, displayed significantly stronger mechanical properties than the natural wood or commercial composite boards. Cellulose aqueous adhesives provide a straightforward, feasible, renewable, and inventive bonding technique for material shaping and the creation of multipurpose devices.

Ferroptosis: An important mechanism of disease mediated by the gut-liver-brain axis.

AIMS: As a unique iron-dependent non-apoptotic cell death, Ferroptosis is involved in the pathogenesis and development of many human diseases and has become a research hotspot in recent years. However, the regulatory role of ferroptosis in the gut-liver-brain axis has not been elucidated. This paper summarizes the regulatory role of ferroptosis and provides theoretical basis for related research. MATERIALS AND METHODS: We searched PubMed, CNKI and Wed of Science databases on ferroptosis mediated gut-liver-brain axis diseases, summarized the regulatory role of ferroptosis on organ axis, and explained the adverse effects of related regulatory effects on various diseases. KEY FINDINGS: According to our summary, the main way in which ferroptosis mediates the gut-liver-brain axis is oxidative stress, and the key cross-talk of ferroptosis affecting signaling pathway network is Nrf2/HO-1. However, there were no specific marker between different organ axes mediate by ferroptosis. SIGNIFICANCE: Our study illustrates the main ways and key cross-talk of ferroptosis mediating the gut-liver-brain axis, providing a basis for future research.

Evolution of Grain Boundary Character Distribution in B10 Alloy from Friction Stir Processing to Annealing Treatment.

In this study, the grain boundary character distribution (GBCD) of a B10 alloy was optimized, employing thermomechanical processing consisting of friction stirring processing (FSP) and annealing treatment. Using electron backscatter diffraction, the effects of rotational speed of FSP and annealing time on the evolution of GBCD were systematically investigated. The GBCD evolution was analyzed concerning various parameters, such as the fraction of low-Σ coincidence site lattice (CSL) boundaries, the average number of grains per twin-related domain (TRD), the length of longest chain (LLC), and the triple junction distribution. The experimental results revealed that the processing of a 1400 rpm rotational speed of FSP followed by annealing at 750 °C for 60 min resulted in the optimum grain boundary engineering (GBE) microstructure with the highest fraction of low-Σ CSL boundaries being 82.50% and a significantly fragmented random boundary network, as corroborated by the highest average number of grains per TRD (14.73) with the maximum LLC (2.14) as well as the highest J2/(1 - J3) value (12.76%). As the rotational speed of FSP increased from 600 rpm to 1400 rpm, the fraction of low-Σ CSL boundaries monotonously increased. The fraction of low-Σ CSL boundaries first increased and then decreased with an increase in annealing time. The key to achieving GBE lies in inhibiting the recrystallization phenomenon while stimulating abundant multiple twinning events through strain-induced boundary migration.

Comparative evaluation of SPE methods for biotoxicity assessment of water and wastewater: Linkage between chemical extracting efficiency and biotoxicity outcome.

Biotoxicity assessment results of environmental waters largely depend on the sample extraction protocols that enrich pollutants to meet the effect-trigger thresholds of bioassays. However, more chemical mixture does not necessarily translate to higher combined biotoxicity. Thus, there is a need to establish the link between chemical extracting efficiency and biotoxicity outcome to standardize extraction methods for biotoxicity assessment of environmental waters. This study compares the performance of five different extraction phases in solid phase extraction (SPE), namely HLB, HLB+Coconut, C18 cartridge, C18 disk and Strata-X, and evaluated their chemical extracting efficiencies and biotoxicity outcomes. We quantitatively assessed cytotoxicity, acute toxicity, genotoxicity, estrogenic activity, and neurotoxicity of the extracts using in vitro bioassays and characterized the chemical extracting efficiencies of the SPE methods through chemical recoveries of 23 model compounds with different polarities and total organic carbon. Using Pareto ranking, we identified HLB+Coconut as the optimal SPE method, which exhibited the highest level of water sample biotoxicity and recovered the most chemicals in water samples. We found that the biotoxicity outcomes of the extracted water samples significantly and positively correlated with the chemical extracting efficiencies of the SPE methods. Moreover, we observed synchronous changing patterns in biotoxicity outcome and chemical extracting efficiencies in response to increasing sample volumes per cartridge (SVPC) during SPE. Our findings underscore that higher chemical extracting efficiency of SPE corresponds to higher biotoxicity outcome of environmental water samples, providing a scientific basis for standardization of SPE methods for adequate assessment of biotoxicities of environmental waters.