Long-range order enabled stability in quantum dot light-emitting diodes.

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs) have produced external quantum efficiencies (EQEs) of more than 25% with narrowband emission1,2, but these LEDs have limited operating lifetimes. We posit that poor long-range ordering in perovskite QD films-variations in dot size, surface ligand density and dot-to-dot stacking-inhibits carrier injection, resulting in inferior operating stability because of the large bias required to produce emission in these LEDs. Here we report a chemical treatment to improve the long-range order of perovskite QD films: the diffraction intensity from the repeating QD units increases three-fold compared with that of controls. We achieve this using a synergistic dual-ligand approach: an iodide-rich agent (aniline hydroiodide) for anion exchange and a chemically reactive agent (bromotrimethylsilane) that produces a strong acid that in situ dissolves smaller QDs to regulate size and more effectively removes less conductive ligands to enable compact, uniform and defect-free films. These films exhibit high conductivity (4 × 10-4 S m-1), which is 2.5-fold higher than that of the control, and represents the highest conductivity recorded so far among perovskite QDs. The high conductivity ensures efficient charge transportation, enabling red perovskite QD-LEDs that generate a luminance of 1,000 cd m-2 at a record-low voltage of 2.8 V. The EQE at this luminance is more than 20%. Furthermore, the stability of the operating device is 100 times better than previous red perovskite LEDs at EQEs of more than 20%.

Conductive MXene/Polymer Composites for Transparent Flexible Supercapacitors.

Transparent flexible energy storage devices are limited by the trade-off among flexibility, transparency, and charge storage capability of their electrode materials. Conductive polymers are intrinsically flexible, but limited by small capacitance. Pseudocapacitive MXene provides high capacitance, yet their opaque and brittle nature hinders their flexibility and transparency. Herein, the development of synergistically interacting conductive polymer Ti3C2Tx MXene/PEDOT:PSS composites is reported for transparent flexible all-solid-state supercapacitors, with an outstanding areal capacitance of 3.1 mF cm-2, a high optical transparency of 61.6%, and excellent flexibility and durability. The high capacitance and high transparency of the devices stem from the uniform and thorough blending of PEDOT:PSS and Ti3C2Tx, which is associated with the formation of O─H…O H-bonds in the composites. The conductive MXene/polymer composite electrodes demonstrate a rational means to achieve high-capacity, transparent and flexible supercapacitors in an easy and scalable manner.

Direct Selective Epitaxy of 2D Sb2Te3 onto Monolayer WS2 for Vertical p-n Heterojunction Photodetectors.

Two-dimensional transition metal dichalcogenides (2D-TMDs) possess appropriate bandgaps and interact via van der Waals (vdW) forces between layers, effectively overcoming lattice compatibility challenges inherent in traditional heterojunctions. This property facilitates the creation of heterojunctions with customizable bandgap alignments. However, the prevailing method for creating heterojunctions with 2D-TMDs relies on the low-efficiency technique of mechanical exfoliation. Sb2Te3, recognized as a notable p-type semiconductor, emerges as a versatile component for constructing diverse vertical p-n heterostructures with 2D-TMDs. This study presents the successful large-scale deposition of 2D Sb2Te3 onto inert mica substrates, providing valuable insights into the integration of Sb2Te3 with 2D-TMDs to form heterostructures. Building upon this initial advancement, a precise epitaxial growth method for Sb2Te3 on pre-existing WS2 surfaces on SiO2/Si substrates is achieved through a two-step chemical vapor deposition process, resulting in the formation of Sb2Te3/WS2 heterojunctions. Finally, the development of 2D Sb2Te3/WS2 optoelectronic devices is accomplished, showing rapid response times, with a rise/decay time of 305 µs/503 µs, respectively.

Voltage-Mode Ferroelectric Synapse for Neuromorphic Computing.

Ferroelectric materials with a modulable polarization extent hold promise for exploring voltage-driven neuromorphic hardware, in which direct current flow can be minimized. Utilizing a single active layer of an insulating ferroelectric polymer, we developed a voltage-mode ferroelectric synapse that can continuously and reversibly update its states. The device states are straightforwardly manifested in the form of variable output voltage, enabling large-scale direct cascading of multiple ferroelectric synapses to build a deep physical neural network. Such a neural network based on potential superposition rather than current flow is analogous to the biological counterpart driven by action potentials in the brain. A high accuracy of over 97% for the simulation of handwritten digit recognition is achieved using the voltage-mode neural network. The controlled ferroelectric polarization, revealed by piezoresponse force microscopy, turns out to be responsible for the synaptic weight updates in the ferroelectric synapses. The present work demonstrates an alternative strategy for the design and construction of emerging artificial neural networks.

Inkjet-printed h-BN memristors for hardware security.

Inkjet printing electronics is a growing market that reached 7.8 billion USD in 2020 and that is expected to grow to ∼23 billion USD by 2026, driven by applications like displays, photovoltaics, lighting, and radiofrequency identification. Incorporating two-dimensional (2D) materials into this technology could further enhance the properties of the existing devices and/or circuits, as well as enable the development of new concept applications. Along these lines, here we report an easy and cheap process to synthesize inks made of multilayer hexagonal boron nitride (h-BN)-an insulating 2D layered material-by the liquid-phase exfoliation method and use them to fabricate memristors. The devices exhibit multiple stochastic phenomena that are very attractive for use as entropy sources in electronic circuits for data encryption (physical unclonable functions [PUFs], true random number generators [TRNGs]), such as: (i) a very disperse initial resistance and dielectric breakdown voltage, (ii) volatile unipolar and non-volatile bipolar resistive switching (RS) with a high cycle-to-cycle variability of the state resistances, and (iii) random telegraph noise (RTN) current fluctuations. The clue for the observation of these stochastic phenomena resides on the unpredictable nature of the device structure derived from the inkjet printing process (i.e., thickness fluctuations, random flake orientations), which allows fabricating electronic devices with different electronic properties. The easy-to-make and cheap memristors here developed are ideal to encrypt the information produced by multiple types of objects and/or products, and the versatility of the inkjet printing method, which allows effortless deposition on any substrate, makes our devices especially attractive for flexible and wearable devices within the internet-of-things.

Reducing Contact Resistance in Organic Field-Effect Transistors: A Comprehensive Comparison between 2D and Microrod Single Crystals.

A comprehensive comparison of organic single crystals based on a single material but with different dimensions provides a unique approach to probe their carrier injection mechanism. In this report, both two-dimensional (2D) and microrod single crystals with the same crystalline structure of an identical thiopyran derivative, 7,14-dioctylnaphtho[2,1-f:6,5-f']bis(cyclopentane[b]thiopyran) (C8-SS), are grown on a glycerol surface with the space-confined method. Organic field-effect transistors (OFETs) based on the 2D C8-SS single crystal exhibit superior performance compared with those based on the microrod single crystal, particularly in their contact resistance (RC). It is demonstrated that the resistance of the crystal bulk in the contact region plays a key role in RC of the OFETs. Thus, among the 30 devices tested, the microrod OFETs typically appear contact-limited, whereas the 2D OFETs possess significantly reduced RC arising from the tiny thickness of the 2D single crystal. The 2D OFETs show high operational stability and high channel mobility up to 5.7 cm2/V·s. The elucidation of the contact behavior highlights the merits and great potential of 2D molecular single crystals in organic electronics.

ZnO nanowire optoelectronic synapse for neuromorphic computing.

Artificial synapses that integrate functions of sensing, memory and computing are highly desired for developing brain-inspired neuromorphic hardware. In this work, an optoelectronic synapse based on the ZnO nanowire (NW) transistor is achieved, which can be used to emulate both the short-term and long-term synaptic plasticity. Synaptic potentiation is present when the device is stimulated by light pulses, arising from the light-induced O2desorption and the persistent photoconductivity behavior of the ZnO NW. On the other hand, synaptic depression occurs when the device is stimulated by electrical pulses in dark, which is realized by introducing a charge trapping layer in the gate dielectric to trap carriers. Simulation of a neural network utilizing the ZnO NW synapses is carried out, demonstrating a high recognition accuracy over 90% after only 20 training epochs for recognizing the Modified National Institute of Standards and Technology digits. The present nanoscale optoelectronic synapse has great potential in the development of neuromorphic visual systems.

Amine-Assisted Delaminated 2D Ti3C2Tx MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes.

Electrochemical capacitors using neutral aqueous electrolytes are safer and cheaper and allow diverse current collectors compared with the counterparts using organic or acidic/alkaline electrolytes. Two-dimensional (2D) MXenes have been demonstrated as the high-capacitive materials with high rate performance. However, MXene electrodes often exhibit a limited capacitance in neutral electrolytes, where the reversible electrochemical reactions rely greatly on the structural and surface properties of MXenes depending on their synthesis methods. Herein, a simple and highly efficient strategy, which combines HF etching of Ti3AlC2 powder and subsequent amine-assisted delamination at a low temperature, is developed to synthesize 2D Ti3C2Tx MXenes. The comprehensive results demonstrate that the enlarged interlayer spacing and the presence of more -O-containing functional groups synergistically contribute to the improvement of capacitive performance in neutral electrolytes. The 2D Ti3C2Tx MXenes show excellent electrochemical performance in various neutral electrolytes, and a high specific gravimetric capacitance of 149.8 F/g is achieved in 1.0 M Li2SO4. Furthermore, the flexible solid-state supercapacitors (SCs) with a neutral PVA/LiCl gel electrolyte possess a superior areal capacitance (163.1 mF/cm2) and high energy density (17.6 µWh/cm2 at 0.07 mW/cm2), together with high user safety. This work provides a promising guideline of synthesis strategy for high-capacitive MXenes used in neutral electrolytes, which may promote the development of safe and flexible power sources with a high energy density.

Conducting polymer-inorganic nanocomposite-based gas sensors: a review.

With the rapid development of conductive polymers, they have shown great potential in room-temperature chemical gas detection, as their electrical conductivity can be changed upon exposure to oxidative or reductive gas molecules at room temperature. However, due to their relatively low conductivity and high affinity toward volatile organic compounds and water molecules, they always exhibit low sensitivity, poor stability, and gas selectivity, which hinder their practical gas sensor applications. In addition, inorganic sensitive materials show totally different advantages in gas sensors, such as high sensitivity, fast response to low concentration analytes, high surface area, and versatile surface chemistry, which could complement the conducting polymers in terms of the sensing characteristics. It seems to be a win-win choice to combine inorganic sensitive materials with polymers for gas detection due to their synergistic effects, which has attracted extensive interests in gas-sensing applications. In this review, we summarize the recent development in polymer-inorganic nanocomposite based gas sensors. The roles of inorganic nanomaterials in improving the gas-sensing performances of conducting polymers are introduced and the progress of conducting polymer-inorganic nanocomposites including metal oxides, metal, carbon (carbon nanotube, graphene), and ternary composites are presented. Finally, a conclusion and a perspective in the field of gas sensors incorporating conducting polymer-inorganic nanocomposite are summarized.

Toward Broadband Imaging: Surface-Engineered PbS Quantum Dot/Perovskite Composite Integrated Ultrasensitive Photodetectors.

PbS colloidal quantum dots passivated by the thiocyanate anion (SCN-) are developed to combine with perovskite (CH3NH3PbI3) as building blocks for UV-vis-NIR broadband photodetectors. Both high electrical conductivity and appropriate energy-level alignment are obtained by the in situ ligand exchange with SCN-. The PbS-SCN/CH3NH3PbI3 composite photodetectors are sensitive to a broad wavelength range covering the UV-vis-NIR region (365-1550 nm), possessing an excellent responsivity of 255 A W-1 at 365 nm and 1.58 A W-1 at 940 nm, remarkably high detectivity of 4.9 × 1013 Jones at 365 nm and 3.0 × 1011 Jones at 940 nm, and fast response time of ≤42 ms. Furthermore, a 10 × 10 photodetector array is fabricated and integrated, which constitutes a high-performance broadband image sensor. Our approach paves a way for the development of highly sensitive broadband photodetectors/imagers that can be easily integrated.

Filter-Free Selective Light Monitoring by Organic Field-Effect Transistor Memories with a Tunable Blend Charge-Trapping Layer.

Integration of selective photodetection and signal storage in a single device, such as organic field-effect transistor (OFET) memories, meets the demands for radiation monitoring and protection. A new strategy is developed to achieve filter-free and selective light monitoring by adopting a solution-processed blend charge-trapping layer in OFET memories, where the charge-trapping layer is composed of phenyl-C61-butyric acid methyl ester (PCBM) dispersed in a polymer electret thin film. The OFET memory without PCBM shows response only to ultraviolet light, whereas the spectral response edges are extended to the visible and near-infrared regions in the corresponding devices with relatively low and high contents of PCBM in the charge-trapping layer, respectively. A set of OFET memories with different PCBM contents is used to qualitatively evaluate the light composition in an optical source. The tunable spectral response in the OFET memories is ascribed to the additional photoassisted charge-trapping paths depending on the blend ratio in the charge-trapping layer. This mechanism may inspire alternative approaches to organic-based optical sensing and monitoring in flexible and wearable electronics.

Ionic-liquid-assisted one-pot synthesis of Cu2O nanoparticles/multi-walled carbon nanotube nanocomposite for high-performance asymmetric supercapacitors.

Finding earth-abundant and high-performance electrode materials for supercapacitors is a demanding challenge in the energy storage field. Cuprous oxide (Cu2O) has attracted increasing attention due to its theoretically high specific capacitance, however, the development of Cu2O-based electrodes with superior capacitive performance is still challenging. We herein report a simple and effective ionic-liquid-assisted sputtering approach to synthesizing the Cu2O nanoparticles/multi-walled carbon nanotubes (Cu2O/MWCNTs) nanocomposite for high-performance asymmetric supercapacitors. The Cu2O/MWCNTs nanocomposite delivers a high specific capacitance of 357 F g-1, good rate capability and excellent capacitance retention of about 89% after 20 000 cycles at a current density of 10 A g-1. The high performance is attributed to the uniform dispersion of small-sized Cu2O nanoparticles on conductive MWCNTs, which offers plenty of redox active sites and thus improve the electron transfer efficiency. Oxygen vacancies are further introduced into Cu2O by the NaBH4 treatment, providing the oxygen-deficient Cu2O/MWCNTs (r-Cu2O/MWCNTs) nanocomposite with significantly improved specific capacitance (790 F g-1) and cycling stability (∼93% after 20 000 cycles). The assembled asymmetric supercapacitor based on the r-Cu2O/MWCNTs//activated carbon (AC) structure achieves a high energy density of 64.2 W h kg-1 at 825.3 W kg-1, and long cycling life. This work may form a foundation for the development of both high capacity and high energy density supercapacitors by showcasing the great potential of earth-abundant Cu-based electrode materials.

Embedded Ag Grid Electrodes as Current Collector for Ultraflexible Transparent Solid-State Supercapacitor.

Flexible transparent solid-state supercapacitors have attracted immerse attention for the power supply of next-generation flexible "see-through" or "invisible" electronics. For fabrication of such devices, high-performance flexible transparent current collectors are highly desired. In this paper, the utilization of embedded Ag grid transparent conductive electrodes (TCEs) fabricated by a facile soft ultraviolet imprinting lithography method combined with scrap techniques, as the current collector for flexible transparent solid-state supercapacitors, is demonstrated. The embedded Ag grid TCEs exhibit not only excellent optoelectronic properties (RS ∼ 2.0 Ω sq-1 and T ∼ 89.74%) but also robust mechanical properties, which could meet the conductivity, transparency, and flexibility needs of current collectors for flexible transparent supercapacitors. The obtained supercapacitor exhibits large specific capacitance, long cycling life, high optical transparency (T ∼ 80.58% at 550 nm), high flexibility, and high stability. Owing to the embedded Ag grid TCE structure, the device shows a slight capacitance loss of 2.6% even after 1000 cycles of repetitive bending for a bending radius of up to 2.0 mm. This paves the way for developing high-performance current collectors and thus flexible transparent energy storage devices, and their general applicability opens up opportunities for flexible transparent electronics.

Efficient and Reversible Electron Doping of Semiconductor-Enriched Single-Walled Carbon Nanotubes by Using Decamethylcobaltocene.

Single-walled carbon nanotubes (SWCNTs) offer great potential for field-effect transistors and integrated circuit applications due to their extraordinary electrical properties. To date, as-made SWCNT transistors are usually p-type in air, and it still remains challenging for realizing n-type devices. Herein, we present efficient and reversible electron doping of semiconductor-enriched single-walled carbon nanotubes (s-SWCNTs) by firstly utilizing decamethylcobaltocene (DMC) deposited by a simple spin-coating process at room temperature as an electron donor. A n-type transistor behavior with high on current, large I on /I off ratio and excellent uniformity is obtained by surface charge transfer from the electron donor DMC to acceptor s-SWCNTs, which is further corroborated by the Raman spectra and the ab initio simulation results. The DMC dopant molecules could be reversibly removed by immersion in N, N-Dimethylformamide solvent, indicating its reversibility and providing another way to control the carrier concentration effectively as well as selective removal of surface dopants on demand. Furthermore, the n-type behaviors including threshold voltage, on current, field-effect mobility, contact resistances, etc. are well controllable by adjusting the surface doping concentration. This work paves the way to explore and obtain high-performance n-type nanotubes for future complementary CMOS circuit and system applications.

Synergistic Effects in CNTs-PdAu/Pt Trimetallic Nanoparticles with High Electrocatalytic Activity and Stability.

We present a straightforward physical approach for synthesizing multiwalled carbon nanotubes (CNTs)-PdAu/Pt trimetallic nanoparticles (NPs), which allows predesign and control of the metal compositional ratio by simply adjusting the sputtering targets and conditions. The small-sized CNTs-PdAu/Pt NPs (~3 nm, Pd/Au/Pt ratio of 3:1:2) act as nanocatalysts for the methanol oxidation reaction (MOR), showing excellent performance with electrocatalytic peak current of 4.4 A mgPt -1 and high stability over 7000 s. The electrocatalytic activity and stability of the PdAu/Pt trimetallic NPs are much superior to those of the corresponding Pd/Pt and Au/Pt bimetallic NPs, as well as a commercial Pt/C catalyst. Systematic investigation of the microscopic, crystalline, and electronic structure of the PdAu/Pt NPs reveals alloying and charge redistribution in the PdAu/Pt NPs, which are responsible for the promotion of the electrocatalytic performance.

Self-Decoration of PtNi Alloy Nanoparticles on Multiwalled Carbon Nanotubes for Highly Efficient Methanol Electro-Oxidation.

ABSTRACT: A simple one-pot method was developed to prepare PtNi alloy nanoparticles, which can be self-decorated on multiwalled carbon nanotubes in [BMIm][BF4] ionic liquid. The nanohybrids are targeting stable nanocatalysts for fuel cell applications. The sizes of the supported PtNi nanoparticles are uniform and as small as 1-2 nm. Pt-to-Ni ratio was controllable by simply selecting a PtNi alloy target. The alloy nanoparticles with Pt-to-Ni ratio of 1:1 show high catalytic activity and stability for methanol electro-oxidation. The performance is much higher compared with those of both Pt-only nanoparticles and commercial Pt/C catalyst. The electronic structure characterization on the PtNi nanoparticles demonstrates that the electrons are transferred from Ni to Pt, which can suppress the CO poisoning effect.

Encapsulated Silver Nanoparticles Can Be Directly Converted to Silver Nanoshell in the Gas Phase.

We report, for the first time, that an encapsulated silver nanoparticle can be directly converted to a silver nanoshell through a nanoscale localized oxidation and reduction process in the gas phase. Silver can be etched when exposed to a mixture of NH3/O2 gases through a mechanism analogous to the formation of aqueous Tollens' reagent, in which a soluble silver-ammonia complex was formed. Starting with Ag@resorcinol-formaldehyde (RF) resin core-shell nanoparticles, we demonstrate that RF-core@Ag-shell nanoparticles can be prepared successfully when the etching rate and RF thickness were well controlled. Due to the strong surface plasmon resonance (SPR) coupling effect among neighboring silver nanoparticles, the RF@Ag nanoparticle showed great SPR and SERS performance. This process provides a general route to the conversion of Ag-core to Ag-shell nanostructures and might be extended to other systems.

Controlled synthesis and synergistic effects of graphene-supported PdAu bimetallic nanoparticles with tunable catalytic properties.

Graphene-supported bimetallic nanoparticles are promising nanocatalysts, which can show strong and tunable catalytic activity and selectivity. Herein room-temperature-ionic-liquid-assisted metal sputtering is utilized to synthesize PdAu bimetallic nanoparticles on graphene with bare surface, small size, high surface density and controlled Pd-to-Au ratio. This controllable synthetic approach is green-chemistry compatible and totally free of additives and byproducts. The supported PdAu nanoparticles show excellent catalytic capabilities for both oxidation and reduction reactions, strongly dependent on the Pd-to-Au ratio. A strong correlation among catalytic performance, bimetallic composition and charge redistribution in the PdAu nanoparticles has been demonstrated. The results suggest that sufficient Au d-holes appear to be significant to the catalysis of oxidation reaction, and a metallic Pd surface is critical to the catalysis of reduction reaction. By the present method, the bimetallic combination can be tailored for distinct types of catalytic reactions.

Transfer-free synthesis of doped and patterned graphene films.

High-quality and wafer-scale graphene on insulating gate dielectrics is a prerequisite for graphene electronic applications. For such applications, graphene is typically synthesized and then transferred to a desirable substrate for subsequent device processing. Direct production of graphene on substrates without transfer is highly desirable for simplified device processing. However, graphene synthesis directly on substrates suitable for device applications, though highly demanded, remains unattainable and challenging. Here, we report a simple, transfer-free method capable of synthesizing graphene directly on dielectric substrates at temperatures as low as 600 °C using polycyclic aromatic hydrocarbons as the carbon source. Significantly, N-doping and patterning of graphene can be readily and concurrently achieved by this growth method. Remarkably, the graphene films directly grown on glass attained a small sheet resistance of 550 Ω/sq and a high transmittance of 91.2%. Organic light-emitting diodes (OLEDs) fabricated on N-doped graphene on glass achieved a current density of 4.0 mA/cm(2) at 8 V compared to 2.6 mA/cm(2) for OLEDs similarly fabricated on indium tin oxide (ITO)-coated glass, demonstrating that the graphene thus prepared may have potential to serve as a transparent electrode to replace ITO.

Green-chemistry Compatible Approach to TiO2-supported PdAu Bimetallic Nanoparticles for Solvent-free 1-Phenylethanol Oxidation under Mild Conditions.

TiO2-supported PdAu bimetallic nanoparticles (NPs) with small size and good dispersity were prepared by the room-temperature ionic liquid-assisted bimetal sputtering, which is simple, environmentally friendly, and free of additives and byproducts. Pd/Au atomic ratio can be tuned by controlling the sputtering conditions simply. High catalytic activity was found in PdAu-NPs-TiO2 hybrids for solvent-free selective oxidation of 1-phenylethanol using O2 as the oxidant at the low temperature of 50 °C and low pressure of 1 atm. It was found that Pd/Au ratio strongly affected the catalytical activity, and the highest conversion of about 35 % and turnover frequency of about 421 h-1 were achieved at 1:1 of Pd/Au atomic ratio. The synergistic effect in PdAu NPs was also discussed based on the comprehensive characterization results. The present approach may offer an alternative platform for future development of green-chemistry compatible bimetallic nanocatalysts.