Controllable synthesis of electric double-layer capacitance and pseudocapacitance coupled porous carbon cathode material for zinc-ion hybrid capacitors.

The designability of the porous structure of carbon material makes it a popular material for zinc-ion hybrid capacitors (ZIHCs). However, the micropore confinement effect leads to sluggish kinetics and is not well resolved yet. In this work, a pore-size controllable carbon material was designed to enhance ion accessibility. The experimental and calculated results revealed that suitable pore sizes and defects were beneficial to ion transfer/adsorption. Meanwhile, oxygen-containing functional groups could introduce a pseudocapacitance reaction. Its large specific surface area and interconnecting network structure could shorten the ion/electron transfer length to reach high ion adsorption capacity and fast kinetic behavior. When used as a zinc-ion hybrid capacitor cathode material, it showed 9.9 kW kg-1 power density and 100 W h kg-1 energy density. Even at 5 A g-1, after 50 000 cycles, there was still 93% capacity retention. Systemic ex situ characterization and first-principles calculations indicated that the excellent electrochemical performance is attributed to the electric double layer capacitance (EDLC) - pseudocapacitance coupled mechanism via the introduction of an appropriate amount of oxygen-containing functional groups. This work provides a robust design for pore engineering and mechanistic insights into rapid zinc-ion storage in carbon materials.

Enhanced Li-Ion Diffusion and Cycling Stability of Ni-Free High-Entropy Spinel Oxide Anodes with High-Concentration Oxygen Vacancies.

High-entropy oxide (HEO) is an emerging type of anode material for lithium-ion batteries with excellent properties, where high-concentration oxygen vacancies can effectively enhance the diffusion coefficient of lithium ions. In this study, Ni-free spinel-type HEOs ((FeCoCrMnZn)3O4 and (FeCoCrMnMg)3O4) were prepared via ball milling, and the effects of zinc and magnesium on the concentration of oxygen vacancy (OV), lithium-ion diffusion coefficient (DLi+), and electrochemical performance of HEOs were investigated. Ab initio calculations show that the addition of zinc narrows down the band gap and thus improves the electrical conductivity. X-ray photoelectron spectroscopy (XPS) results show that (FeCoCrMnZn)3O4 (42.7%) and (FeCoCrMnMg)3O4 (42.5%) have high OV concentration. During charge/discharge, the OV concentration of (FeCoCrMnZn)3O4 is higher than that of (FeCoCrMnMg)3O4. The galvanostatic intermittent titration technique (GITT) results show that the DLi+ value of (FeCoCrMnZn)3O4 is higher than that of (FeCoCrMnMg)3O4 during charge and discharge. All of that can improve its specific discharge capacity and enhance its cycle stability. (FeCoCrMnZn)3O4 achieved a discharge capacity of 828.6 mAh g-1 at 2.0 A g-1 after 2000 cycles. This work provides a deep understanding of the structure and performance of HEO.

A Zero-Strain Insertion Cathode Material for Room-Temperature Fluoride-Ion Batteries.

A fluoride-ion battery (FIB) is a novel type of energy storage system that has a higher volumetric energy density and low cost. However, the high working temperature (>150 °C) and unsatisfactory cycling performance of cathode materials are not favorable for their practical application. Herein, fluoride ion-intercalated CoFe layered double hydroxide (LDH) (CoFe-F LDH) was prepared by a facile co-precipitation approach combined with ion-exchange. The CoFe-F LDH shows a reversible capacity of ∼50 mAh g-1 after 100 cycles at room temperature. Although there is still a big gap between FIBs and lithium-ion batteries, the CoFe-F LDH is superior to most cathode materials for FIBs. Another important advantage of CoFe-F LDH FIBs is that they can work at room temperature, which has been rarely achieved in previous reports. The superior performance stems from the unique topochemical transformation property and small volume change (∼0.82%) of LDH in electrochemical cycles. Such a tiny volume change makes LDH a zero-strain cathode material for FIBs. The 2D diffusion pathways and weak interaction between fluoride ions and host layers facilitate the de/intercalation of fluoride ions, accompanied by the chemical state changes of Co2+/Co3+ and Fe2+/Fe3+ couples. First-principles calculations also reveal a low F- diffusion barrier during the cyclic process. These findings expand the application field of LDH materials and propose a novel avenue for the designs of cathode materials toward room-temperature FIBs.

Controllable construction of hierarchically porous carbon composite of nanosheet network for advanced dual-carbon potassium-ion capacitors.

Benefitting from the abundance and inexpensive nature of potassium resources, potassium-ion energy storage technology is considered a potential alternative to current lithium-ion systems. Potassium-ion capacitors (PICs) as a burgeoning K-ion electrochemical energy storage device, are capable of delivering high energy at high power without sacrificing lifespan. However, owing to the sluggish kinetics and significant volume change induced by the large K+-diameter, matched electrode materials with good ion accessibility and fast K+ intercalation/deintercalation capability are urgently desired. In this work, pine needles and graphene oxide (GO) are utilized as precursors to fabricate oxygen-doped activated carbon/graphene (OAC/G) porous nanosheet composites. The introduction of GO not only induces the generation of interconnected nanosheet network, but also increases the oxygen-doping content of the composite, thus expanding the graphite interlayer spacing. Experimental analysis combined with first-principle calculations reveal the transport/storage mechanism of K+ in the OAC/G composite anode, demonstrating that the high surface area, sufficient reactive sites, enlarged interlayer distance and open channels in the porous nanosheet network contribute to rapid and effective K+ diffusion and storage. When incorporated with pine needle-activated carbon as cathode, the assembled dual-carbon PICs can function at a high voltage of 5 V, exhibiting a high energy density of 156.7 Wh kg-1 at a power density of 500 W kg-1 along with a satisfied cycle life, which highlights their potential application in economic and advanced PICs.

An improved bioinspired strategy to construct nitrogen and phosphorus dual-doped network porous carbon with boosted kinetics potassium ion capacitors.

Potassium-ion capacitors (PICs) have drawn appreciable attention because PICs can masterly integrate the virtues of the high energy density of battery-type anode and high power density of capacitor-type cathode. However, the sanguine scenario involves the incompatible capacity and sluggish kinetics in the PIC device. Herein, we report the synthesis of nitrogen and phosphorus-doped network porous carbon materials (NPMCs) via a self-sacrifice template strategy, which possesses a desired three-dimensional structure and prosperous electrochemical properties for K+ storage capacity. The obtained hierarchical porous carbon delivers a high reversible capacity of 420 mA h g-1 at 0.05 A g-1 and good cycling performance owing to its high concentration of reversible carbon defects and strong charge transfer kinetics. As expected, an advanced PIC device was assembled with a working voltage as high as 4.5 V, delivering an extraordinary energy density of 81.6 W h kg-1 as well as a splendid long life. Systematic characterization analysis combined with density functional theory calculations indicates that the strategy for preparing PIC devices with outstanding performance in this work can provide new insights for the development of PICs for an extensive range of applications.

Carbon defects applied to potassium-ion batteries: a density functional theory investigation.

Functionalized carbon nanomaterials are potential candidates for use as anode materials in potassium-ion batteries (PIBs). The inevitable defect sites in the architectures significantly affect the physicochemical properties of the carbon nanomaterials, thus defect engineering has recently become a vital research area for carbon-based electrodes. However, one of the major issues holding back its further development is the lack of a complete understanding of the effects accounting for the potassium (K) storage of different carbon defects, which have remained elusive. Owing to pressing research demands, the construction strategies, adsorption difficulties, and structure-activity relationships of the carbon defect-involved reaction centers for the K adsorption are systematically summarized using first principles calculations. Carbon defects affect the ability to trap K by affecting the geometry, charge distribution, and conductive behavior of the carbon surface. The results show that carbon doping with pyridinic-N, pyrrolic-N, and P defect sites tend to act as trapping K sites because of electron-deficient sites. However, graphite-N and sulfur doping are less capable of trapping K. In addition, it has been proved using calculations that the defects can inhibit the growth of the K dendrite. Finally, using the molten salt method, we prepared the undoped and nitrogen-doped carbon materials for comparison, verifying the results of the calculation.

Design of a Scalable Dendritic Copper@Ni2+, Zn2+ Cation-Substituted Cobalt Carbonate Hydroxide Electrode for Efficient Energy Storage.

Design and fabrication of novel electrode materials with excellent specific capacitance and cycle stability are urgent for advanced energy storage devices, and the combinability of multiple modification methods is still insufficient. Herein, Ni2+, Zn2+ double-cation-substitution Co carbonate hydroxide (NiZnCo-CH) nanosheets arrays were established on 3D copper with controllable morphology (3DCu@NiZnCo-CH). The self-standing scalable dendritic copper offers a large surface area and promotes fast electron transport. The 3DCu@NiZnCo-CH electrode shows a markedly improved electrochemical performance with a high specific capacity of ∼1008 C g-1 at 1 A g-1 (3.2, 2.83, and 1.26 times larger than Co-CH, ZnCo-CH, and NiCo-CH, respectively) and outstanding rate capability (828.8 C g-1 at 20 A g-1) due to its compositional and structural advantages. Density functional theory (DFT) calculation results illustrate that cation doping adjusts the adsorption process and optimizes the charge transfer kinetics. Moreover, an aqueous hybrid supercapacitor based on 3DCu@NiZnCo-CH and rGO demonstrates a high energy density of 42.29 Wh kg-1 at a power density of 376.37 W kg-1, along with superior cycling performance (retained 86.7% of the initial specific capacitance after 10,000 cycles). Impressively, these optimized 3DCu@NiZnCo-CH//rGO devices with ionic liquid can be operated stably in a large potential range of 4 V with greatly enhanced energy density and power capability (110.12 Wh kg-1 at a power density of 71.69 W kg-1). These findings may shed some light on the rational design of transition-metal compounds with tunable architectures by multiple modification methods for efficient energy storage.

Fibrinolytic system related to pulmonary arterial pressure and lung function of patients with idiopathic pulmonary fibrosis.

OBJECTIVES AND AIMS: To investigate urokinase-(uPA) and tissue-type (tPA) plasminogen activator and plasminogen activator inhibitor type-1 (PAI-1) levels in patients with idiopathic pulmonary fibrosis (IPF) and to determine the relationship between fibrinolytic system and pulmonary arterial pressure and pulmonary function. METHODS: Seventy-nine patients with IPF were included. Bronchoalveolar lavage fluid (BALF) and blood samples were collected. The concentrations of tPA, uPA and PAI-1 were measured using enzyme-linked immunosorbent assay. Doppler echocardiography was used to detect tricuspid regurgitation pressure gradient (TRPG) to estimate pulmonary arterial pressure. RESULTS: BALF tPA elevated (P < 0.005), circulatory PAI-1 decreased (P = 0.05) and the ratio of uPA and PAI-1 decreased (P = 0.01) in BALF in IPF patients with pulmonary hypertension (PH) compared to those without PH. Positive linear correlations were found: BALF tPA and TRPG (r = 0.558, P = 0.013); the predicted percentage of diffusion capacity of lung for carbon monoxide adjustments for alveolar volume and BALF uPA (r = 0.319, P = 0.035). Negative linear correlations were as follows: BALF PAI-1 and the predicted percentage of VCmax (r = -0.325, P = 0.020), or total lung capacity (r = -0.312, P = 0.033); circulatory PAI-1 and TRPG (r = -0.697, P = 0.003). CONCLUSIONS: The change of alveolar fibrolytic system in IPF, especially the uPA reduction and the PAI-1elevation, contributes to the deterioration of lung function. During the lung injury initiating fibrosis, tPA and PAI-1 might be leaked out of the pulmonary capillaries into alveoli, resulting in their elevation in alveoli and reduction in circulation, and finally contributing to the development of PH in IPF.