Comparative Analysis of the Gelsemium Alkaloids Metabolism in Human, Pig, Goat, and Rat Liver Microsomes.

AIM: The aim of this study was to investigate the metabolism of Gelsemium elegans in human, pig, goat and rat liver microsomes and to elucidate the metabolic pathways and cleavage patterns of the Gelsemium alkaloids among different species. METHODS: A human, goat, pig and rat liver microparticles were incubated in vitro. After incubating at 37°C for 1 hour and centrifuging, the processed samples were detected by HPLC/Qq-TOFMS was used to detect alcohol extract of Gelsemium elegans and its metabolites. RESULTS: Forty-six natural products were characterized from alcohol extract of Gelsemium elegans and 13 metabolites were identified. These 13 metabolites belong to the gelsemine, koumine, gelsedine, humantenine, yohimbane, and sarpagine classes of alkaloids. The metabolic pathways included oxidation, demethylation and dehydrogenation. After preliminary identification, the metabolites detected in the four species were different. All 13 metabolites were detected in pig and rat microsomes, but no oxidative metabolites of Gelsedine-type alkaloids were detected in goat and human microsomes. CONCLUSION: In this study, Gelsemium elegans metabolic patterns in different species are clarified and the in vitro metabolism of Gelsemium elegans is investigated. It is of great significance for its clinical development and rational application.

Redox Molecular Junction Metal-Covalent Organic Frameworks for Light-assisted CO2 Energy Storage.

Visible-light sensitive and bi-functionally favored CO2 reduction (CRR)/evolution (CER) photocathode catalysts that can get rid of the utilization of ultraviolet light and improve sluggish kinetics is demanded to conquer the current technique-barrier of traditional Li-CO2 battery. Here, a kind of redox molecular junction sp2c metal-covalent organic framework (i.e. Cu3-BTDE-COF) has been prepared through the connection between Cu3 and BTDE and can serve as efficient photocathode catalyst in light-assisted Li-CO2 battery. Cu3-BTDE-COF with redox-ability, visible-light-adsorption region, electron-hole separation ability and endows the photocathode with excellent round-trip efficiency (95.2 %) and an ultralow voltage hysteresis (0.18 V), outperforming the Schiff base COFs (i.e. Cu3-BTDA-COF and Cu3-DT-COF) and majority of the reported photocathode catalysts. Combined theoretical calculations with characterizations, Cu3-BTDE-COF with the integration of Cu3 centers, thiazole and cyano groups possess strong CO2 adsorption/activation and Li+ interaction/diffusion ability to boost the CRR/CER kinetics and related battery property.

Tailoring the Hydrophobic Interface of Core-Shell HKUST-1@Cu2O Nanocomposites for Efficiently Selective CO2 Electroreduction.

The electrochemical reduction of carbon dioxide (CO2) to ethylene creates a carbon-neutral approach to converting carbon dioxide into intermittent renewable electricity. Exploring efficient electrocatalysts with potentially high ethylene selectivity is extremely desirable, but still challenging. In this report, a laboratory-designed catalyst HKUST-1@Cu2O/PTFE-1 is prepared, in which the high specific surface area of the composites with improved CO2 adsorption and the abundance of active sites contribute to the increased electrocatalytic activity. Furthermore, the hydrophobic interface constructed by the hydrophobic material polytetrafluoroethylene (PTFE) effectively inhibits the occurrence of hydrogen evolution reactions, providing a significant improvement in the efficiency of CO2 electroreduction. The distinctive structures result in the remarkable hydrocarbon fuels generation with high Faraday efficiency (FE) of 67.41%, particularly for ethylene with FE of 46.08% (-1.0 V vs RHE). The superior performance of the catalyst is verified by DFT calculation with lower Gibbs free energy of the intermediate interactions with improved proton migration and selectivity to emerge the polycarbon（C2+） product. In this work, a promising and effective strategy is presented to configure MOF-based materials with tailored hydrophobic interface, high adsorption selectivity and more exposed active sites for enhancing the efficiency of the electroreduction of CO2 to C2+ products with high added value.

Repurposing Salicylamides to Combat Phytopathogenic Bacteria and Induce Plant Defense Responses.

Based on the research strategy of "drug repurposing", a series of derivatives and marketed drugs that containing salicylic acid skeleton were tested for their antibacterial activities against phytopathogens. Salicylic acid can not only regulate some important growth metabolism of plants, but also induce plant disease resistance. The bioassay results showed that the salicylamides exhibited excellent antibacterial activity. Especially, oxyclozanide showed the best antibacterial effect against Xanthomonas oryzae, Xanthomonas axonopodis pv. citri and Pectobacterium atroseptica with MICs of 0.78, 3.12 and 12.5 µg.mL-1, respectively. In vivo experiments with rice bacterial leaf blight had further demonstrated that oxyclozanide exhibited stronger antibacterial activity than the commercial bactericide, thiodiazole copper. Oxyclozanide could induce plant defense responses through the determination of salicylic acid content and the activities of defense-related enzymes including CAT, POD, and SOD in rice. The preliminarily antibacterial mechanism study indicated that oxyclozanide exhibited the antibacterial activity by disrupting cell integrity and reducing bacterial pathogenicity. Additionally, oxyclozanide could induce plant defense responses through the determination of salicylic acid content.

Short pathways to highly active antimicrobial: structurally diverse polyamines derivatives from Amino-Aldehyde condensation strategy.

BACKGROUND: Chemical fungicides are the mainstay of plant disease control in agricultural production, but there are a very limited number of drugs that can effectively control plant diseases. Two series of secondary amine derivatives were synthesized using the diamine skeleton combined with saturated aromatic and aliphatic aldehydes, and their antibacterial and antifungal activities against plant pathogens were determined. In addition, the antimicrobial mechanism of the highly active compound A26 was preliminarily examined against Xanthomonas oryzae (Xoo). RESULTS: Compound A26 exhibited the highest antibacterial potency among all the target compounds, with MIC values of 3.12, 3.12 and 12.5 µg mL-1 against Xoo, Xanthomonas axonopodis pv. Citri and Pseudomonas sollamacearum, respectively. In addition, compound A26 had powerful curative and protective effects against Xoo at 200 µg mL-1 , and was better than the control agent Xinjunan. Preliminary mechanistic studies showed that compound A26 reduced the bacterial pathogenicity by targeting cell membranes and inhibiting the secretion of extracellular polysaccharides. Meanwhile, the toxicity of compound A26 to Human Embryonic Kidney 293 cells and Human Liver-7702 was similar to that of Xinjunan, and it had moderate toxicity according to the World Health Organization classification standard of oral exogenous toxicity, with an LD50 of 245.47 mg kg-1 . CONCLUSION: Secondary amines have efficient and broad-spectrum antibacterial activity against plant pathogenic bacteria and are expected to be a new class of candidate compounds for antibacterial drugs. © 2023 Society of Chemical Industry.

Antimicrobial activity of natural and semi-synthetic carbazole alkaloids.

Since the first natural carbazole alkaloid, murrayanine, was isolated from Mwraya Spreng, carbazole alkaloid derivatives have been widely concerned for their anti-tumor, anti-viral and anti-bacterial activities. In recent decades, a growing body of data suggest that carbazole alkaloids and their derivatives have different biological activities. This is the first comprehensive description of the antifungal and antibacterial activities of carbazole alkaloids in the past decade (2012-2022), including natural and partially synthesized carbazole alkaloids in the past decade. Finally, the challenges and problems faced by this kind of alkaloids are summarized. This paper will be helpful for further exploration of this kind of alkaloids.

Efficacy of pterostilbene suppression on Aspergillus flavus growth, aflatoxin B1 biosynthesis and potential mechanisms.

Aspergillus flavus, a widespread saprotrophic filamentous fungus, could colonize agricultural crops with aflatoxin contamination, which endangers food security and the agricultural economy. A safe, effective and environmentally friendly fungicide is urgently needed. Pterostilbene, a natural phytoalexin originated from Pterocarpus indicus Willd., Vaccinium spp. and Vitis vinifera L., has been reported to possess excellent antimicrobial activity. More importantly, it is quite safe and healthy. In our screening tests of plant polyphenols for the inhibition of A. flavus, we found that pterostilbene evidently inhibited mycelial growth of Aspergillus flavus (EC50 = 15.94 µg/mL) and the inhibitory effect was better than that of natamycin (EC50 = 22.01 µg/mL), which is a natural product widely used in food preservation. Therefore, we provided insights into the efficacy of pterostilbene suppression on A. flavus growth, aflatoxin B1 biosynthesis and its potential mechanisms against A. flavus in the present study. Here, pterostilbene at concentrations of 250 and 500 µg/mL could effectively inhibit the infection of A. flavus on peanuts. And the biosynthesis of the secondary metabolite aflatoxin B1 was also inhibited. The antifungal effects of pterostilbene are exerted by inducing a large amount of intracellular reactive oxygen species production to bring the cells into a state of oxidative stress, damaging cellular biomolecules such as DNA, proteins and lipids and destroying the integrity of the cell membrane. Taken together, our study strongly supported the fact that pterostilbene could be considered a safe and effective antifungal agent against A. flavus infection.

Regulation of Redox Molecular Junctions in Covalent Organic Frameworks for H2 O2 Photosynthesis Coupled with Biomass Valorization.

H2 O2 photosynthesis coupled with biomass valorization can not only maximize the energy utilization but also realize the production of value-added products. Here, a series of COFs (i.e. Cu3 -BT-COF, Cu3 -pT-COF and TFP-BT-COF) with regulated redox molecular junctions have been prepared to study H2 O2 photosynthesis coupled with furfuryl alcohol (FFA) photo-oxidation to furoic acid (FA). The FA generation efficiency of Cu3 -BT-COF was found to be 575 mM g-1 (conversion ≈100 % and selectivity >99 %) and the H2 O2 production rate can reach up to 187 000 µM g-1 , which is much higher than Cu3 -pT-COF, TFP-BT-COF and its monomers. As shown by theoretical calculations, the covalent coupling of the Cu cluster and the thiazole group can promote charge transfer, substrate activation and FFA dehydrogenation, thus boosting both the kinetics of H2 O2 production and FFA photo-oxidation to increase the efficiency. This is the first report about COFs for H2 O2 photosynthesis coupled with biomass valorization, which might facilitate the exploration of porous-crystalline catalysts in this field.

Electronic Tuning of CO2 Interaction by Oriented Coordination of N-Rich Auxiliary in Porphyrin Metal-Organic Frameworks for Light-Assisted CO2 Electroreduction.

The efficient CO2 electroreduction into high-value products largely relies on the CO2 adsorption/activation or electron-transfer of electrocatalysts, thus site-specific functionalization methods that enable boosted related interactions of electrocatalysts are much desired. Here, an oriented coordination strategy is reported to introduce N-rich auxiliary (i.e., hexamethylenetetramine, HMTA) into metalloporphyrin metal organic frameworks (MOFs) to synthesize a series of site-specific functionalized electrocatalysts (HMTA@MOF-545-M, M = Fe, Co, and Ni) and they are successfully applied in light-assisted CO2 electroreduction. Noteworthy, thus-obtained HMTA@MOF-545-Co presents approximately two times enhanced CO2 adsorption-enthalpy and electrochemical active surface-area with largely decreased impedance-value after modification, resulting in almost twice higher CO2 electroreduction performance than its unmodified counterpart. Besides, its CO2 electroreduction performance can be further improved under light-illumination and displays superior FECO (≈100%), high CO generation rate (≈5.11 mol m-2  h-1 at -1.1 V) and energy efficiency (≈70% at -0.7 V). Theoretical calculations verify that the oriented coordination of HMTA can increase the charge density of active sites, almost doubly enhance the CO2 adsorption energy, and largely reduce the energy barrier of rate determining step for the boosted performance improvement. This work might promote the development of modifiable porous crystalline electrocatalysts in high-efficiency CO2 electroreduction.

Effect of access cavities on the biomechanics of mandibular molars: a finite element analysis.

INTRODUCTION: This study aimed to predict the fracture resistance of a mandibular first molar (MFM) with diverse endodontic cavities using finite element analysis (FEA). METHODS: Five experimental finite element models representing a natural tooth (NT) and 4 endodontically treated MFMs were generated. Treated MFM models were with a traditional endodontic cavity (TEC) and minimally invasive endodontic (MIE) cavities, including guided endodontic cavity (GEC), contracted endodontic cavity (CEC) and truss endodontic cavity (TREC). Three loads were applied, simulating a maximum bite force of 600 N (N) vertically and a normal masticatory force of 225 N vertically and laterally. The distributions of von Mises (VM) stress and maximum VM stress were calculated. RESULTS: The maximum VM stresses of the NT model were the lowest under normal masticatory forces. In endodontically treated models, the distribution of VM stress in GEC model was the most similar to NT model. The maximum VM stresses of the GEC and CEC models under different forces were lower than those of TREC and TEC models. Under vertical loads, the maximum VM stresses of the TREC model were the highest, while under the lateral load, the maximum VM stress of the TEC model was the highest. CONCLUSION: The stress distribution of tooth with GEC was most like NT. Compared with TECs, GECs and CECs may better maintain fracture resistance, TRECs, however, may have a limited effect on maintenance of the tooth resistance.

A Novel Two-Dimensional Liquid Chromatography Combined with Ultraviolet Detection Method for Quantitative Determination of Pyridoxal 5'-Phosphate, 4-Pyridoxine Acid and Pyridoxal in Animal Plasma.

Vitamin B6 is an indispensable micronutrient in organisms and is widely distributed in blood, tissues, and organs. Changes in the content and ratio of vitamin B6 can affect the entire physiological condition of the body, so it becomes particularly important to reveal the relationship between changes in its content and disease by monitoring vitamin B6 levels in the organism. In this study, a two-dimensional liquid chromatography-UV detector (2D-LC-UV) was used to establish a method for the simultaneous detection of PLP, PA, and PL for the first time. First, PLP, PA, and PL were extracted with plasma: 0.6 M TCA: ultrapure water = 1:2:3 (v/v/v) and then derivatized. Enrichment and preliminary separation were performed on a one-dimensional column and automatically entered into a two-dimensional column for further separation. This method exhibited good selectivity, and the correlation coefficients for the analyte calibration curves were >0.99. The detection limits for PLP, PA, and PL were 0.1, 0.2, and 4 nmol/L, respectively. The results showed that the system has high loading capacity, excellent resolution, and a good peak shape. This method is expected to provide applicability for the determination of PLP, PA, and PL in pharmacological, pharmaceutical, and clinical research.

Exploring boron applications in modern agriculture: Antifungal activities and mechanisms of phenylboronic acid derivatives.

BACKGROUND: The unreasonable use of chemical fungicides causes common adverse consequences that not only affect the environment, but also cause resistance and resurgence problems of plant pathogens, which are extremely harmful to human health, the economy, and the environment. Based on the rich biological activities of boron-based compounds, 82 phenylboronic acid derivatives were selected and their antifungal activities against six agricultural plant pathogens were determined. Combined with transcriptomics tools, the mechanism of action of compound A49 (2-chloro-5-trifluoromethoxybenzeneboronic acid) against Botrytis cinerea Pers (B. cinerea) was studied. RESULTS: The EC50 values of compounds A24, A25, A30, A31, A36, A41, A49 and B23 against all six fungi were under 10 µg/mL. Compound A49 displayed significant activity against B. cinerea (EC50 = 0.39 µg/mL), which was better than that of commercial fungicide boscalid (EC50 = 0.55 µg/mL). A49 not only inhibited the germination of B. cinerea spores, but also caused abnormal cell morphology, loss of cell membrane integrity, enhanced cell membrane permeability, and accumulation of intracellular reactive oxygen species. Further findings showed that A49 reduced cellular antioxidant activity, and peroxidase and catalase activities. Transcriptomic results indicated that A49 could degrade intracellular redox processes and alter the metabolism of some amino acids. Meanwhile, A49 showed obvious activity in vivo and low cytotoxicity to mammal cells. CONCLUSION: The boron-containing small molecule compounds had high efficiency and broad-spectrum antifungal activities against six plant pathogens, and are expected to be candidate compounds for a new class of antifungal drugs. © 2023 Society of Chemical Industry.

Drug repurposing strategy II: from approved drugs to agri-fungicide leads.

Epidemic diseases of crops caused by fungi deeply affected the course of human history and processed a major restriction on social and economic development. However, with the enormous misuse of existing antimicrobial drugs, an increasing number of fungi have developed serious resistance to them, making the diseases caused by pathogenic fungi even more challenging to control. Drug repurposing is an attractive alternative, it requires less time and investment in the drug development process than traditional R&D strategies. In this work, we screened 600 existing commercially available drugs, some of which had previously unknown activity against pathogenic fungi. From the primary screen at a fixed concentration of 100 µg/mL, 120, 162, 167, 85, 102, and 82 drugs were found to be effective against Rhizoctonia solani, Sclerotinia sclerotiorum, Botrytis cinerea, Phytophthora capsici, Fusarium graminearum and Fusarium oxysporum, respectively. They were divided into nine groups lead compounds, including quinoline alkaloids, benzimidazoles/carbamate esters, azoles, isothiazoles, pyrimidines, pyridines, piperidines/piperazines, ionic liquids and miscellaneous group, and simple structure-activity relationship analysis was carried out. Comparison with fungicides to identify the most promising drugs or lead structures for the development of new antifungal agents in agriculture.

Structural Simplification of Cryptolepine to Obtain Novel Antifungal Quinoline Derivatives against Phytopathogenic Fungi.

A series of quinoline derivatives were designed and synthesized by the structural simplification of cryptolepine and evaluated for their fungicidal activity against six phytopathogenic fungi. Most of these compounds exhibited remarkable activities against Botrytis cinereain vitro. Among them, compounds A18 and L01 showed superior antifungal activity. Significantly, compared to cryptolepine, compound A18 exhibited broad-spectrum inhibitory activities against B. cinerea, Sclerotinia sclerotiorum, Rhizoctonia solani, Phytophthora capsica, Magnaporthe oryzae, and Fusarium graminearum with the respective EC50 values of 0.249, 1.569, 3.915, 0.505, 0.246, and 4.999 µg/mL. Compound L01 displayed the best antifungal activity against B. cinerea with an EC50 value of 0.156 µg/mL. Preliminary mechanistic studies showed that compound A18 could inhibit spore germination, affect the permeability of the cell membrane, increase the content of reactive oxygen species, and affect the morphology of hyphae and cells. Moreover, compound A18 showed excellent in vivo protective effect against B. cinerea, which was more potent than pyrimethanil and equitant to cryptolepine. These results evidenced that compound A18 displayed superior fungicidal activities and could be a potential fungicidal candidate against plant fungal diseases.

Drug repurposing strategy part 1: from approved drugs to agri-bactericides leads.

Phytopathogenic bacteria are a major cause of crop mortality and yield reduction, especially in field cultivation. The lack of effective chemistry agri-bactericides is responsible for challenging field prevention and treatment, prompting the development of long-lasting solutions to prevent, reduce, or manage some of the most devastating plant diseases facing modern agriculture today and in the future. Therefore, there is an urgent need to find lead drugs preventing and treating phytopathogenic bacterial infection. Drug repurposing, a strategy used to identify novel uses for existing approved drugs outside of their original indication, takes less time and investment than Traditional R&D Strategies in the process of drug development. Based on this method, we conduct a screen of 700 chemically diverse and potentially safe drugs against Xanthomonas oryzae PV. oryzae ACCC 11602 (Xoo), Xanthomonas axonopodis PV. citri (Xac), and Pectobacterium atrosepticum ACCC 19901 (Pa). Furthermore, the structure-activity relationship and structural similarity analysis of active drugs classify potent agri-bactericides into 8 lead series: salicylanilides, cationic nitrogen-containing drugs, azole antifungals, N-containing group, hydroxyquinolines, piperazine, kinase inhibitor and miscellaneous groups. MIC values were evaluated as antibacterial activities in this study. Identifying highly active lead compounds from the screening of approved drugs and comparison with the currently applied plant pathogenic bactericide to validate the bactericidal activity of the best candidates and assess if selected molecules or scaffolds lead to develop new antibacterial agents in the future. In conclusion, this study provides a possibility for the development of potent and highly selective agri-bactericides leads.

Manifestation and Mechanisms of Abnormal Mineralization in Teeth.

Tooth biomineralization is a dynamic and complicated process influenced by local and systemic factors. Abnormal mineralization in teeth occurs when factors related to physiologic mineralization are altered during tooth formation and after tooth maturation, resulting in microscopic and macroscopic manifestations. The present Review provides timely information on the mechanisms and structural alterations of different forms of pathological tooth mineralization. A comprehensive study of these alterations benefits diagnosis and biomimetic treatment of abnormal mineralization in patients.

Light, Heat and Electricity Integrated Energy Conversion System: Photothermal-Assisted Co-Electrolysis of CO2 and Methanol.

Strategy that can design powerful photothermal-catalysts to achieve photothermal-effect assisted coupling-catalysis is much desired for the improvement of energy conversion efficiency and redox product value in CO2 electroreduction system. Herein, a kind of bifunctional viologen-containing covalent organic framework (Ni-2CBpy2+ -COF) has been prepared and successfully applied in photothermal-assisted co-electrolysis of CO2 and methanol. Specifically, the FECO (cathode) and FEHCOOH (anode) for Ni-2CBpy2+ -COF can reach up to ≈100 % at 1.9 V with ≈31.5 % saved overall electricity-consumption when the anodic oxygen evolution reaction (OER) is replaced by methanol oxidation. The superior performance could be attributed to the cyclic diquats in Ni-2CBpy2+ -COF that enhance the photothermal effect (ΔT=49.1 °C) to accelerate faster charge transfer between catalyst and immediate species as well as higher selectivity towards desired products as revealed by DFT calculations and characterizations.

A Honeycomb-Like Porous Crystalline Hetero-Electrocatalyst for Efficient Electrocatalytic CO2 Reduction.

Porous heterostructured electrocatalysts with multifunctionality and synergistic effect have much benefit for efficient electrocatalytic CO2 reduction reaction (CO2 RR), yet it still remains a daunting challenge to explore heterostructures based on covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) in this field. Here, a series of honeycomb-like porous crystalline hetero-electrocatalysts (MCH-X, X = 1-4, X stands for the numbered sample obtained from different MOF doses in the synthesis of the MCH) are synthesized, and these are successfully applied in electrocatalytic CO2 RR. The specially designed heterostructures with integrated porous MOF-template and ultrathin COF-coating enable efficient CO2 adsorption/activation and conversion into CH4 . The best of them, MCH-3, shows greatly inhibited H2 evolution, excellent current density (-398.1 mA cm-2 ), and superior FE CH 4 ${\rm{F}}{{\rm{E}}_{{\rm{C}}{{\rm{H}}_4}}}$ (76.7%) to the physical mixture (38.0%), the MOF@COF without the honeycomb-like morphology (47.7%), and the bare COF (37.5%) and MOF (15.9%) at -1.0 V. Based on the density functional theory calculations and various characterizations, the vital roles of the MOF in facilitating CO2 adsorption/activation, stabilizing intermediates, and conquering the energy barrier of rate-determining step are intensively studied.

Redox-Active Crystalline Coordination Catalyst for Hybrid Electrocatalytic Methanol Oxidation and CO2 Reduction.

Hybrid CO2 electroreduction (HCER) is recognized as an important strategy to improve the total value of redox products and energy conversion efficiency. In this work, a coordination catalyst model system (Ni8 -TET with active oxidation sites, Ni-TPP with active reduction sites and PCN-601 with redox-active sites) for HCER was established for the first time. Especially, PCN-601 can complete both anodic methanol oxidation and cathodic CO2 reduction with FEHCOOH and FECO over 90 %. The performance can be further improved with light irradiation (FE nearly 100 %). DFT calculations reveal that the transfer of electrons from NiII 8 clusters to metalloporphyrins under electric fields results in the raised oxidizability of Ni8 clusters and the raised reducibility of metalloporphyrin, which then improves the electrocatalytic performance. This work serves as a well-defined model system and puts forward a new design idea for establishing efficient catalysts for hybrid CO2 electroreduction.

Smart, Biomimetic Periosteum Created from the Cerium(III, IV) Oxide-Mineralized Eggshell Membrane.

The periosteum orchestrates the microenvironment of bone regeneration, including facilitating local neuro-vascularization and regulating immune responses. To mimic the role of natural periosteum for bone repair enhancement, we adopted the principle of biomimetic mineralization to delicately inlay amorphous cerium oxide within eggshell membranes (ESMs) for the first time. Cerium from cerium oxide possesses unique ability to switch its oxidation state from cerium III to cerium IV and vice versa, which provides itself promising potential for biomedical applications. ESMs are mineralized with cerium(III, IV) oxide and examined for their biocompatibility. Apart from serving as physical barriers, periosteum-like cerium(III, IV) oxide-mineralized ESMs are biocompatible and can actively regulate immune responses and facilitate local neuro-vascularization along with early-stage bone regeneration in a murine cranial defect model. During the healing process, cerium-inlayed biomimetic periosteum can boost early osteoclastic differentiation of macrophage lineage cells, which may be the dominant mediator of the local repair microenvironment. The present work provides novel insights into expanding the definition and function of a biomimetic periosteum to boost early-stage bone repair and optimize long-term repair with robust neuro-vascularization. This new treatment strategy which employs multifunctional bone-and-periosteum-mimicking systems creates a highly concerted microenvironment to expedite bone regeneration.