Reservoir damage mechanism and "Double protection" drilling fluid of tight sandstone gas reservoir in central SiChuan Basin.

It is very important to clarify the reservoir damage characteristics and damage characteristics and damage mechanism of tight sandstone gas reservoirs in Jinhua-Zhongtai mountain area of central SiChuan Basin, and put forward the technical countermeasures of "Double protection" drilling fluid to protect the reservoir and the environment, which is very important for the efficient well construction in this area. Through X-ray diffraction, scanning electron microscopy, casting thin sections and other testing methods, the mineral composition and microstructure characteristics of the block were analyzed, and the potential damage factors of the reservoir were clarified. Based on the sensitivity evaluation, it was revealed that the overall sensitivity damage of the block was weak. The main damage type was salt-sensitive damage, and the critical salinity was 9472.5 mg/L. On the basis of the environmental protection drilling fluid system used in this block, the surfactant which can effectively prevent gas invasion and reduce surface tension is selected, and the "Double protection" drilling fluid system is constructed. Through comprehensive performance test and reservoir protection performance evaluation, the core permeability damage rate of the optimized drilling fluid system is reduced from 88.77 to 18.66%, and the cuttings recovery rate is increased to more than 66%, and the cuttings expansion rate is reduced to less than 3.2%, which can effectively solve the problem of reservoir damage in drilling in Jinhua-Zhongtai mountain block in central Sichuan.

Preparation and Performance Evaluation of a Plugging Agent with an Interpenetrating Polymer Network.

In view of the problems of polymer cross-linked elastic particle plugging agents commonly used in oilfields, including easy shear, poor temperature resistance, and weak plugging strength for large pores, the introduction of particles with certain rigidity and network structure, and cross-linking with a polymer monomer can improve the structural stability, temperature resistance, and plugging effect, and the preparation method is simple and low-cost. An interpenetrating polymer network (IPN) gel was prepared in a stepwise manner. The conditions of IPN synthesis were optimized. The IPN gel micromorphology was analyzed by SEM and the viscoelasticity, temperature resistance, and plugging performance were also evaluated. The optimal polymerization conditions included a temperature of 60 °C, a monomer concentration of 10.0-15.0%, a cross-linker concentration of 1.0-2.0% of monomer content, and a first network concentration of 20%. The IPN showed good fusion degree with no phase separation, which was the prerequisite for the formation of high-strength IPN, whereas particle aggregates reduced the strength. The IPN had better cross-linking strength and structural stability, with a 20-70% increase in the elastic modulus and a 25% increase in temperature resistance. It showed better plugging ability and erosion resistance, with the plugging rate reaching 98.9%. The stability of the plugging pressure after erosion was 3.8 times that of a conventional PAM-gel plugging agent. The IPN plugging agent improved the structural stability, temperature resistance, and plugging effect of the plugging agent. This paper provides a new method for improving the performance of a plugging agent in an oilfield.

Synthesis and Characterization of an Novel Intercalated Polyacrylamide/Clay Nanocomposite.

Solving the problem of the low temperature and low salt resistances of conventional polyacrylamide and the high cost of functional monomers, and thus, introducing it to the interlayer space provided by a layered structure for polymer modification, is a promising option. In this study, montmorillonite was used as the inorganic clay mineral, and an intercalated polyacrylamide/clay nanocomposite was synthesized via in situ intercalation polymerization. The optimal synthesis conditions were a clay content of 10.7%, preparation temperature of 11 °C, initiator concentration of 2.5 × 10-4 mol/L, and chain extender concentration of 5%. The IR results showed that the polymer was successfully introduced to the nanocomposite. The synthesized intercalated polyacrylamide/clay nanocomposite exhibited a better thickening effect, good viscoelasticity, and better salt resistance and thermal stability than polyacrylamide. In addition, the thickening capacity and thermal stability were superior to the salt-resistant polymer, with a 16.0% higher thickening viscosity and a 15.1% higher viscosity retention rate at 85 °C for 60 d. The intercalated polyacrylamide/clay nanocomposite further expanded the application of polyacrylamide in petroleum exploitation.