A multifunctional ionic liquid coating on 3D-Printed prostheses: Combating infection, promoting osseointegration.

Periprosthetic infection and mechanical loosening are two leading causes of implant failure in orthopedic surgery that have devastating consequences for patients both physically and financially. Hence, advanced prostheses to simultaneously prevent periprosthetic infection and promote osseointegration are highly desired to achieve long-term success in orthopedics. In this study, we proposed a multifunctional three-dimensional printed porous titanium alloy prosthesis coated with imidazolium ionic liquid. The imidazolium ionic liquid coating exhibited excellent bacterial recruitment property and near-infrared (NIR) triggered photothermal bactericidal activity, enabling the prosthesis to effectively trap bacteria in its vicinity and kill them remotely via tissue-penetrating NIR irradiation. In vivo anti-infection and osseointegration investigations in infected animal models confirmed that our antibacterial prosthesis could provide long-term and sustainable prevention against periprosthetic infection, while promoting osseointegration simultaneously. It is expected to accelerate the development of next-generation prostheses and improve patient outcomes after prosthesis implantation.

The dual effects of dexmedetomidine on intestinal barrier and intestinal motility during sepsis.

BACKGROUND: Sepsis, characterized by dysregulated host responses to infection, remains a critical global health concern, with high morbidity and mortality rates. The gastrointestinal tract assumes a pivotal role in sepsis due to its dual functionality as a protective barrier against injurious agents and as a regulator of motility. Dexmedetomidine, an α2-adrenergic agonist commonly employed in critical care settings, exhibits promise in influencing the maintenance of intestinal barrier integrity during sepsis. However, its impact on intestinal motility, a crucial component of intestinal function, remains incompletely understood. METHODS: In this study, we investigated dexmedetomidine's multifaceted effects on intestinal barrier function and motility during sepsis using both in vitro and in vivo models. Sepsis was induced in Sprague-Dawley rats via cecal ligation and puncture. Rats were treated with dexmedetomidine post-cecal ligation and puncture, and various parameters were assessed to elucidate dexmedetomidine's impact. RESULTS: Our findings revealed a dichotomous influence of dexmedetomidine on intestinal physiology. In septic rats, dexmedetomidine administration resulted in improved intestinal barrier integrity, as evidenced by reduced mucosal hyper-permeability and morphological alterations. However, a contrasting effect was observed on intestinal motility, as dexmedetomidine treatment inhibited both the frequency and amplitude of contractions in isolated intestinal strips and decreased the distance of ink migration in vivo. Additionally, dexmedetomidine suppressed the secretion of pro-motility hormones while having no influence on hormones that inhibit intestinal peristalsis. CONCLUSION: The study revealed that during sepsis, dexmedetomidine exhibited protective effects on barrier integrity, although concurrently it hindered intestinal motility, partly attributed to its modulation of pro-motility hormone secretion. These findings underscore the necessity of a comprehensive understanding of dexmedetomidine's impact on multiple facets of gastrointestinal physiology in sepsis management, offering potential implications for therapeutic strategies and patient care.

Higher trophic levels and species with poorer dispersal traits are more susceptible to habitat loss on island fragments.

Ongoing habitat loss and fragmentation caused by human activities represent one of the greatest causes of biodiversity loss. However, the effects of habitat loss and fragmentation are not felt equally among species. Here, we examined how habitat loss influenced the diversity and abundance of species from different trophic levels, with different traits, by taking advantage of an inadvertent experiment that created habitat islands from a once continuous forest via the creation of the Thousand Island Lake, a large reservoir in China. On 28 of these islands with more than a 9000-fold difference in their area (0.12-1154 ha), we sampled plants, herbivorous insects, and predatory insects using effort-controlled sampling and analyses. This allowed us to discern whether any observed differences in species diversity were due to passive sampling alone or to demographic effects that disproportionately influenced some species relative to others. We found that while most metrics of sampling effort-controlled diversity increased with island area, the strength of the effect was exacerbated for species in higher trophic levels. When we more explicitly examined differences in species composition among islands, we found that the pairwise difference in species composition among islands was dominated by species turnover but that nestedness increased with differences in island area, indicating that some species are more likely to be absent from smaller islands. Furthermore, by examining trends of several dispersal-related traits of species, we found that species with lower dispersal propensity tended to be those that were lost from smaller islands, which was observed for herbivorous and predatory insects. Our results emphasize the importance of incorporating within-patch demographic effects, as well as the taxa and traits of species when understanding the influence of habitat loss on biodiversity.

Functionalized biomimetic mineralized collagen promotes osseointegration of 3D-printed titanium alloy microporous interface.

Mineralized collagen (MC) is the fundamental unit of natural bone tissue and can induce bone regeneration. Unmodified MC has poor mechanical properties and a single component, making it unable to cope with complex physiological environment. In this study, we introduced sodium alginate (SA) and vascular endothelial growth factor (VEGF) into the MC material to construct functionalized mineralized collagen (FMC) with good mechanical strength and the ability to continuously release growth factors. The FMC is filled into the pores of 3D printed titanium alloy scaffold to form a new organic-inorganic bioactive interface. With the continuous degradation of FMC, bone marrow mesenchymal stem cells (BMSCs) and vascular endothelial cells (VECs) in the surrounding environment are recruited to the surface of the scaffold to promote bone and vascular regeneration. After implanting the scaffold into the distal femoral defect of rabbits, Micro CT, histological, push-out, as well as immunohistochemical analysis showed that the composite interface can significantly promote osseointegration. These findings provide a new strategy for the development and application of mineralized collagen materials.

Bioactive prosthesis interface compositing variable-stiffness hydrogels regulates stem cells fates to facilitate osseointegration through mechanotransduction.

Fluid hydrogel is proper to be incorporated with rigid porous prosthesis interface, acting as a soft carrier to support cells and therapeutic factors, to enhance osseointegration. In the previous study, we innovatively utilized self-healing supramolecular hydrogel as 3D cell culture platform to incorporate with 3D printed porous titanium alloy scaffold, constructing a novel bioactive interface. However, the concrete relationship and mechanism of hydrogel stiffness influencing cellular behaviors of bone marrow mesenchymal stem cells (BMSCs) within the interface are still inconclusive. Herein, we synthesized a series of supramolecular hydrogels with variable stiffness as extracellular matrix (ECM) to enhance the osseointegration of 3D printed prosthesis interface. BMSCs exposed to stiff hydrogel received massive environmental mechanical stimulations, subsequently transducing biophysical cues into biochemical signal through mechanotransduction process. The mRNA-sequencing analysis revealed that the activated FAK-MAPK pathway played significant roles in promoting osteogenic differentiation, thus contributing to a strong osseointegration. Our work preliminarily demonstrated the relationship of ECM stiffness and osteogenic differentiation trend of BMSCs, and optimized stiffness of hydrogel within a certain range benefitting for osteogenic differentiation and prosthesis interface osseointegration, providing a valuable insight into the development of orthopaedic implants equipped with osteogenic mechanotransduction ability.

Epidemiology and survival of patients with spinal meningiomas: a large retrospective cohort study.

INTRODUCTION: Spinal meningiomas (SMs) are relatively rare central nervous system tumors that usually trigger neurological symptoms. The prevalence of SMs is increasing with the aging of the global population. This study aimed to perform a systematic epidemiologic and survival prognostic analysis of SMs to evaluate their public health impact and to develop a novel method to estimate the overall survival at 3-year, 5-year, and 10-year in patients with SMs. METHODS: Five thousand one hundred fifty eight patients with SMs were recruited from the Surveillance, Epidemiology, and End Results (SEER) database from 2000 to 2019. Firstly, descriptive analysis was performed on the epidemiology of SMs. Secondly, these individuals were randomly allocated to the training and validation sets in a ratio of 7:3. Kaplan-Meier method and Cox regression analysis were utilized in the training set to identify independent prognostic factors and to construct a nomogram for survival prognosis. Subsequently, the discriminative power, predictive performance, and clinical utility of the nomogram were evaluated by receiver operating characteristic curve and decision curve analysis. Finally, a mortality risk stratification system and a web-based dynamic nomogram were constructed to quantify the risk of mortality in patients with SMs. RESULTS: The annual age-adjusted incidence rates of SMs increased steadily since 2004, reaching a rate of 0.40 cases per 100 000 population in 2019, with a female-to-male ratio of ~4:1. The age groups of 50-59, 60-69, and 70-79 years old were the most prevalent ages for SMs, accounting for 19.08, 24.93, and 23.32%, respectively. In addition, seven independent prognostic factors were identified to establish a prognostic nomogram for patients with SMs. The decision curve analysis and receiver operating characteristic curve indicated that the nomogram had high clinical utility and favorable accuracy. Moreover, the mortality risk stratification system effectively divided patients into low-risk, middle-risk, and high-risk subgroups. CONCLUSIONS: SMs are relatively rare benign spinal tumors prevalent in the white elderly female population. Clinicians could use the nomogram to personalize the prediction of the overall survival probability of patients with SMs, categorize these patients into different mortality risk subgroups, and develop personalized decision-making plans. Moreover, the web-based dynamic nomogram could help to further promote clinical application and assist clinicians in providing personalized counseling, timely monitoring, and clinical assessment for patients.

A variable mineralization time and solution concentration intervene in the microstructure of biomimetic mineralized collagen and potential osteogenic microenvironment.

The absence of a conducive bone formation microenvironment between fractured ends poses a significant challenge in repairing large bone defects. A promising solution is to construct a bone formation microenvironment that mimics natural bone tissue. Biomimetic mineralized collagen possesses a chemical composition and microstructure highly similar to the natural bone matrix, making it an ideal biomimetic bone substitute material. The microstructure of biomimetic mineralized collagen is influenced by various factors, and its biomineralization and microstructure, in turn, affect its physicochemical properties and biological activity. We aimed to utilize mineralization time and solution concentration as variables and employed the polymer-induced liquid precursor strategy to fabricate mineralized collagen with diverse microstructures, to shed light on how mineralization parameters impact the material microstructure and physicochemical properties. We also investigated the influence of microstructure and physicochemical properties on cell biocompatibility and the bone-forming microenvironment. Through comprehensive characterization, we examined the physical and chemical properties of I-EMC under various mineralization conditions and assessed the in vitro and in vivo biocompatibility and osteogenic performance. By investigating the relationship between mineralization parameters, material physicochemical properties, and osteogenic performance, we revealed how microstructures influence cellular behaviors like biocompatibility and osteogenic microenvironment. Encouragingly, mineralization solutions with varying concentrations, stabilized by polyacrylic acid, successfully produced intrafibrillar and extrafibrillar mineralized collagen. Compared to non-mineralized collagen, all mineralized samples demonstrated improved bone-forming performance. Notably, samples prepared with a 1× mineralization solution exhibited relatively smooth surfaces with even mineralization. Extending the mineralization time enhanced the degree of mineralization and osteogenic performance. Conversely, samples prepared with a 2× mineralization solution had rough surfaces with large calcium phosphate particles, indicating non-uniform mineralization. Overall, our research advances the potential for commercial production of mineralized collagen protein products, characterized by dual biomimetic properties, and their application in treating various types of bone defects.

Unraveling the parameters and biological mechanisms of CO2 laser therapy for acute pain relief.

Acute pain-related pathology is a significant challenge in clinical practice, and the limitations of traditional pain-relief drugs have made it necessary to explore alternative approaches. Photobiomodulation (PBM) therapy using CO2 laser has emerged as a promising option. In this study, we aimed to identify the optimal parameters of CO2 laser irradiation for acute pain relief through in vivo and in vitro experiments. First, we validated the laser intensity used in this study through bone marrow mesenchymal stem cells (BMSCs) experiments to ensure it will not adversely affect stem cell viability and morphology. Then we conducted a detailed evaluation of the duty cycle and frequency of CO2 laser by the hot plate and formalin test. Results showed a duty cycle of 3% and a frequency of 25 kHz produced the best outcomes. Additionally, we investigated the potential mechanisms underlying the effects of CO2 laser by immunohistochemical staining, and found evidence to suggest that the opioid receptor may be involved in its analgesic effect. In conclusion, this study provides insights into the optimal parameters and underlying mechanisms of CO2 laser therapy for effective pain relief, thereby paving the way for future clinical applications.

Application of advanced biomaterials in photothermal therapy for malignant bone tumors.

Malignant bone tumors are characterized by severe disability rate, mortality rate, and heavy recurrence rate owing to the complex pathogenesis and insidious disease progression, which seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment offering prominent hyperthermal therapeutic effects to enhance the effectiveness of surgical treatment and avoid recurrence. Simultaneously, various advanced biomaterials with photothermal capacity are currently created to address malignant bone tumors, performing distinctive biological functions, including nanomaterials, bioceramics (BC), polymers, and hydrogels et al. Furthermore, PTT-related combination therapeutic strategies can provide more significant curative benefits by reducing drug toxicity, improving tumor-killing efficiency, stimulating anti-cancer immunity, and improving immune sensitivity relative to monotherapy, even in complex tumor microenvironments (TME). This review summarizes the current advanced biomaterials applicable in PTT and relevant combination therapies on malignant bone tumors for the first time. The multiple choices of advanced biomaterials, treatment methods, and new prospects for future research in treating malignant bone tumors with PTT are generalized to provide guidance. Malignant bone tumors seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment enhancing the effectiveness of surgical treatment and avoiding recurrence. In this review, advanced biomaterials applicable in the PTT of malignant bone tumors and their distinctive biological functions are comprehensively summarized for the first time. Simultaneously, multiple PTT-related combination therapeutic strategies are classified to optimize practical clinical issues, contributing to the selection of biomaterials, therapeutic alternatives, and research perspectives for the adjuvant treatment of malignant bone tumors with PTT in the future.

3D-printed PCL scaffolds with anatomy-inspired bionic stratified structures for the treatment of growth plate injuries.

The growth plate is a cartilaginous tissue with three distinct zones. Resident chondrocytes are highly organized in a columnar structure, which is critical for the longitudinal growth of immature long bones. Once injured, the growth plate may potentially be replaced by bony bar formation and, consequently, cause limb abnormalities in children. It is well-known that the essential step in growth plate repair is the remolding of the organized structure of chondrocytes. To achieve this, we prepared an anatomy-inspired bionic Poly(ε-caprolactone) (PCL) scaffold with a stratified structure using three-dimensional (3D) printing technology. The bionic scaffold is engineered by surface modification of NaOH and collagen Ⅰ (COL Ⅰ) to promote cell adhesion. Moreover, chondrocytes and bone marrow mesenchymal stem cells (BMSCs) are loaded in the most suitable ratio of 1:3 for growth plate reconstruction. Based on the anatomical structure of the growth plate, the bionic scaffold is designed to have three regions, which are the small-, medium-, and large-pore-size regions. These pore sizes are used to induce BMSCs to differentiate into similar structures such as the growth plate. Remarkably, the X-ray and histological results also demonstrate that the cell-loaded stratified scaffold can successfully rebuild the structure of the growth plate and reduce limb abnormalities, including limb length discrepancies and angular deformities in vivo. This study provides a potential method of preparing a bioinspired stratified scaffold for the treatment of growth plate injuries.

Comprehensive evaluation and advanced modification of polymethylmethacrylate cement in bone tumor treatment.

Bone tumors are invasive diseases with a tendency toward recurrence, disability, and high mortality rates due to their grievous complications. As a commercial polymeric biomaterial, polymethylmethacrylate (PMMA) cement possesses remarkable mechanical properties, injectability, and plasticity and is, therefore, frequently applied in bone tissue engineering. Numerous positive effects in bone tumor treatment have been demonstrated, including biomechanical stabilization, analgesic effects, and tumor recurrence prevention. However, to our knowledge, a comprehensive evaluation of the application of the PMMA cement in bone tumor treatment has not yet been reported. This review comprehensively evaluates the efficiency and complications of the PMMA cement in bone tumor treatment, for the first time, and introduces advanced modification strategies, providing an objective and reliable reference for the application of the PMMA cement in treating bone tumors. We have also summarized the current research on modifications to enhance the anti-tumor efficacy of the PMMA cement, such as drug carriers and magnetic hyperthermia.

Biomaterials-enhanced bioactive agents to efficiently block spinal metastases of cancers.

The spine is the most common site of bone metastases, as 20%-40% of cancer patients suffer from spinal metastases. Treatments for spinal metastases are scarce and palliative, primarily aiming at relieving bone pain and preserving neurological function. The bioactive agents-mediated therapies are the most effective modalities for treating spinal metastases because they achieve systematic and specific tumor regression. However, the clinical applications of some bioactive agents are limited due to the lack of targeting capabilities, severe side effects, and vulnerability of drug resistance. Fortunately, advanced biomaterials have been developed as excipients to enhance these treatments, including chemotherapy, phototherapy, magnetic hyperthermia therapy, and combination therapy, by improving tumor targeting and enabling sustaining and stimuli-responsive release of various therapeutic agents. Herein, the review summarizes the development of biomaterials-mediated bioactive agents for enhanced treatments of spinal metastases and predicts future research trends.

Solid-state Lidar with wide steering angle using counter-propagating beams.

In a solid-state photonics-based Lidar, all essential components can be integrated into a silicon chip. It is simple and effective to use a tunable laser source to implement Lidar's beam steering. However, how to effectively increase the steering angle in a small wavelength tuning range is usually a key challenge due to the limited material and waveguide dispersion. In Silicon-on-insulator waveguide, we design a novel solid-state Lidar using two trans-electrical (TE) polarized beams counter-propagating towards each other. Two corresponding output beams from just a single grating coupler (GC) can be seamlessly combined to double the beam steering angle. Furthermore, a low-priced solid-state Lidar is designed for TE polarized beams counter-propagating towards each other by using wavelength division multiplexed laser array.

Independent Prognostic Factors and Nomogram Prediction of Cancer-Specific Survival in Postoperative Patients With Spinal Cord Astrocytoma.

STUDY DESIGN: Retrospective cohort study. OBJECTIVE: Spinal cord astrocytoma (SCA) is a rare central nervous system malignancy that typically requires early surgical intervention. However, the substantial frequency of relapse and bad outcomes limit the surgical advantage for patients. Herein, we aimed to determine the independent prognostic factors of cancer-specific survival (CSS) in post-surgical patients with primary SCA and to develop a new method to estimate the chances of CSS in these patients at 3-, 5- and 10-year. METHODS: A total of 364 postoperative patients with SCA were recruited from the Surveillance, Epidemiology, and End Results database and randomly assigned to the training and validation sets. Univariate and multivariate Cox regression assessments were used to identify independent prognostic indicators. Second, a nomogram was established by integrating these indicators to estimate 3-, 5-, and 10-year CSS in patients with SCA who underwent surgery. Subsequently, the discriminatory power and predictive performance of the nomogram were assessed using the receiver operating characteristic (ROC) curve, calibration curves, and decision curve analysis (DCA). Finally, a mortality risk stratification system was generated. RESULTS: Age, tumor stage, histological type, and radiotherapy were recognized as potential predictive indicators of CSS for postoperative patients with SCA. The ROC curve and DCA indicate that the nomogram has good accuracy and high clinical utility. Furthermore, the mortality risk stratification system efficiently divides patients into 3 risk subgroups. CONCLUSIONS: The nomogram could accurately anticipate the 3-, 5-, and 10-year percentages of CSS in postoperative patients with SCA. It could assist clinicians with personalized medical counseling, risk stratification management, and clinical decision-making, improving the clinical outcomes of these patients.

Advanced applications of strontium-containing biomaterials in bone tissue engineering.

Strontium (Sr) and strontium ranelate (SR) are commonly used therapeutic drugs for patients suffering from osteoporosis. Researches have showed that Sr can significantly improve the biological activity and physicochemical properties of materials in vitro and in vivo. Therefore, a large number of strontium containing biomaterials have been developed for repairing bone defects and promoting osseointegration. In this review, we provide a comprehensive overview of Sr-containing biomaterials along with the current state of their clinical use. For this purpose, the different types of biomaterials including calcium phosphate, bioactive glass, and polymers are discussed and provided future outlook on the fabrication of the next-generation multifunctional and smart biomaterials.

Effect of diets enriched in n-6 or n-3 fatty acids on dry matter intake, energy balance, oxidative stress, and milk fat profile of transition cows.

The objective of this study was to determine the effect of dietary supplementation of n-3 polyunsaturated fatty acids (PUFA) and n-6 PUFA on dry matter intake (DMI), energy balance, oxidative stress, and performance of transition cows. Forty-five multiparous Holstein dairy cows with similar parity, body weight (BW), body condition score (BCS), and milk yield were used in a completely randomized design during a 56-d experimental period including 28 d prepartum and 28 d postpartum. At 240 d of pregnancy, cows were randomly assigned to one of the 3 isoenergetic and isoprotein dietary treatments, including a control ration containing 1% hydrogenated fatty acid (CON), a ration with 8% extruded soybean (HN6, high n-6 PUFA source), and a ration with 3.5% extruded flaxseed (HN3; high n-3 PUFA source). The HN6 and HN3 diets had an n-6/n-3 ratio of 3.05:1 and 0.64:1 in prepartum cows and 8.16:1 and 1.59:1 in postpartum cows, respectively. During the prepartum period (3, 2, and 1 wk before calving), DMI, DMI per unit of BW, total net energy intake, and net energy balance were higher in the HN3 than in the CON and NH6 groups. During the postpartum period (2, 3, and 4 wk after calving), cows fed HN3 and HN6 diets both showed increasing DMI, DMI as a percentage of BW, and total net energy intake compared with those fed the CON diet. The BW of calves in the HN3 group was 12.91% higher than those in the CON group. Yield and nutrient composition of colostrum (first milking after calving) were not affected by HN6 or HN3 but milk yield from 1 to 4 wk of milking was significantly improved compared with CON. During the transition period, BW, BCS, and BCS changes were not affected. Cows fed the HN6 diet had a higher plasma NEFA concentration compared with the CON cows during the prepartum period. Feeding HN3 reduced the proportion of de novo fatty acids and increased the proportion of preformed long-chain fatty acids in regular milk. In addition, the n-3 PUFA-enriched diet reduced the n-6/n-3 PUFA ratio in milk. In conclusion, increasing the n-3 fatty acids concentration in the diet increased both DMI during the transition period and milk production after calving, and supplementing n-3 fatty acids was more effective in mitigating the net energy balance after calving.

Functionalization of biomimetic mineralized collagen for bone tissue engineering.

Mineralized collagen (MC) is the basic unit of bone structure and function and is the main component of the extracellular matrix (ECM) in bone tissue. In the biomimetic method, MC with different nanostructures of neo-bone have been constructed. Among these, extra-fibrous MC has been approved by regulatory agencies and applied in clinical practice to play an active role in bone defect repair. However, in the complex microenvironment of bone defects, such as in blood supply disorders and infections, MC is unable to effectively perform its pro-osteogenic activities and needs to be functionalized to include osteogenesis and the enhancement of angiogenesis, anti-infection, and immunomodulation. This article aimed to discuss the preparation and biological performance of MC with different nanostructures in detail, and summarize its functionalization strategy. Then we describe the recent advances in the osteo-inductive properties and multifunctional coordination of MC. Finally, the latest research progress of functionalized biomimetic MC, along with the development challenges and future trends, are discussed. This paper provides a theoretical basis and advanced design philosophy for bone tissue engineering in different bone microenvironments.

Medium chain fatty acid supplementation improves animal metabolic and immune status during the transition period: A study on dairy cattle.

The transition period is the stage of the high incidence of metabolic and infectious diseases in dairy cows. Improving transition dairy cows' health is crucial for the industry. This study aimed to determine the effects of dietary supplementation medium-chain fatty acids (MCFAs) on immune function, metabolic status, performance of transition dairy cows. Twenty multiparous Holstein cows randomly assigned to two treatments at 35 d before calving. 1) CON (fed the basal 2) MCFA treatment (basal diet was supplemented at an additional 20 g MCFAs mixture every day) until 70 d after calving. The results showed that the serum amyloid A myeloperoxidase concentrations in the blood of cows in MCFA treatment significantly decreased during the early lactation (from 1 d to 28 d after calving) 0.03, 0.04, respectively) compared with the CON, while the tumor necrosis factor concentration was significantly decreased at 56 d after calving (P = 0.02). In addition, the concentration of insulin in the pre-calving (from 21 d before calving to calving) blood of cows in MCFA treatment was significantly decreased (P = 0.04), and concentration of triglyceride also showed a downward trend at 28 d after calving 0.07). Meanwhile, MCFAs supplementation significantly decreased the concentrations of lithocholic acid, hyodeoxycholic acid, and hyocholic acid in the blood at 1 d calving (P = 0.02, < 0.01, < 0.01, respectively), and the level of hyocholic acid taurocholic acid concentrations (P < 0.01, = 0.01, respectively) decreased dramatically at 14 d after calving. However, compared with the CON, the pre-calving dry matter intake and the early lactation milk yield in MCFA treatment were significantly decreased (P = 0.05, 0.02, respectively). In conclusion, MCFAs supplementation transition diet could improve the immune function and metabolic status of dairy cows, and the health of transition cows might be beneficial from the endocrine status.

The Polo-Like Kinase 1-Mammalian Target of Rapamycin Axis Regulates Autophagy to Prevent Intestinal Barrier Dysfunction During Sepsis.

The intestines play a crucial role in the development of sepsis. The balance between autophagy and apoptosis in intestinal epithelial cells is dynamic and determines intestinal permeability. The present study focused on the potential role of autophagy in sepsis-induced intestinal barrier dysfunction and explored the mechanisms in vivo and in vitro. Excessive apoptosis in intestinal epithelia and a disrupted intestinal barrier were observed in septic mice. Promoting autophagy with rapamycin reduced intestinal epithelial apoptosis and restored intestinal barrier function, presenting as decreased serum diamine oxidase (DAO) and fluorescein isothiocyanate-dextran 40 (FD40) levels and increased expression of zonula occludens-1 (ZO-1) and Occludin. Polo-like kinase 1 (PLK1) knockdown in mice ameliorated intestinal epithelial apoptosis and the intestinal barrier during sepsis, whereas these effects were reduced with chloroquine and enhanced with rapamycin. PLK1 also promoted cell autophagy and improved lipopolysaccharide-induced apoptosis and high permeability in vitro. Moreover, PLK1 physically interacted with mammalian target of rapamycin (mTOR) and participated in reciprocal regulatory crosstalk in intestinal epithelial cells during sepsis. This study provides novel insight into the role of autophagy in sepsis-induced intestinal barrier dysfunction and indicates that the PLK1-mTOR axis may be a promising therapeutic target for sepsis.

Robot-assisted versus navigation-assisted screw placement in spinal vertebrae.

PURPOSE: Both robots and navigation are effective strategies for optimizing screw placement, as compared to freehand placement. However, few studies have compared the accuracy and efficiency of these two techniques. Thus, the purpose of this study is to compare the accuracy and efficiency of robotic and navigation-assisted screw placement in the spinal vertebrae. METHODS: The 24 spine models were divided into a robot- and navigation-assisted groups according to the left and right sides of the pedicle. The C-arm transmits image data simultaneously to the robot and navigates using only one scan. After screw placement, the accuracy of the two techniques were compared using "angular deviation" and "Gertzbein and Robbins scale" in different segments (C1-7, T1-4, T5-8, T9-12, and L1-S1). In addition, operation times were compared between robot- and navigation-assisted groups. RESULTS: Robots and navigation systems can simultaneously assist in screw placement. The robot-assisted group had significantly less angular deviation than the navigation-assisted group from C1 to S1 (p < 0.001). At the C1-7 and T1-4 segments, the robot-assisted group had a higher rate of acceptable screws than the robot-assisted group. However, at the T5-8, T9-12, and L1-S1 segments, no significant difference was found in the incidence of acceptable screws between the two groups. Moreover, robot-assisted screw placement required less operative time than navigation (p < 0.05). CONCLUSION: The robot is more accurate and efficient than navigation in aiding screw placement. In addition, robots and navigation can be combined without increasing the number of fluoroscopic views.